========================================================================= Date: Fri, 1 Feb 2002 04:18:14 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: HPLXKNDB and "Around The World Info" MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Daniel suggested: >There will be no danger of more spam or whatever, since I always >zip the database and publish it then. So no web robots can grab >the email addresses or other info. I assume robots look for the @ in e-mail addresses; it would be quite easy then to fool them by replacing the "@" with another letter, say "¬", something which noone usually uses in an e-mail address. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 06:52:41 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Paulo Custodio wrote: > > Any success of running PIM/PE with palrun on a Windows > NT machine? Do you have the latest version - Stefan Peichl provided an upgrade recently which works fine on my secretaries WinNT machine. There should be a copy at DASoft somewhere. HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 08:46:40 +0200 Reply-To: Rian Maartens Sender: HPLX Mailing List From: Rian Maartens Subject: Re: Short battery life in an upgraded 200lx Comments: To: "Batson, Dale N" MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I have a 2MB ds 32MB 200lx and a 4MB ds 32mb 200lx. The 2MB gives me more battery life than the 4MB which implies that all double speed 32MB does not use the same power and that the pre-upgrade memory also plays a role. All the best Rian Maartens Cape Town, RSA ----- Original Message ----- From: Batson, Dale N To: Sent: Friday, February 01, 2002 1:27 AM Subject: Re: Short battery life in an upgraded 200lx Bob, I have a DS 96MB 200LX and its battery life has been pretty close to yours. I tried using 1700mAH NiMH batteries for a while, but they discharged so quickly I grew tired of recharging them and went back to using Lithium batteries. I also have a SS 1MB 100LX -- its batteries last MUCH longer. Dale Batson ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 07:47:57 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Idea: eMail->SUPER->File->email MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Russel On Thu, 31 Jan 2002 22:45:48 +0000, Russel Brooks wrote: > Problem: > I want a file that is on SUPER. Since HV doesn't work with my > ISP I have to use another pc to logon to the net, surf to SUPER, > find the file and download it, connect my 200LX to that pc, and > transfer the file to the LX. There are some features that can > speed up parts of this (pc card readers vs. cpack serial > connection) but it still ends up being a multi-step process. > > Idea: > I wish I could send an email to SUPER with a command similar to: > > GET fn.ext I see from your mail header you use Post/LX 2.2g, so you must have WWW/LX, Then this should work for you: 1. Download SUPER.GDB from SUPER. this contains all SUPER entries, so you canbrowse and search offline and find out the exact file name for what you need. 2. Use Roboweb or even only get.exe with WWW/LX and let it download http://www.palmtop.net/anonftp/pub/İfilename¨ If you use Roboweb/lX, the procedure is pretty much the same as you watned: You can have a template "email" with URL etc. and only have to add the file name you want to downlaod. Then "send" the mail and as a result you will have the file in your inbox. Tony, would that work? I have never tried that procedure for larger files, let alone ZIP files. Would they "come in" as an email attachment? GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 02:59:40 -0500 Reply-To: Martin Bergvill Sender: HPLX Mailing List From: Martin Bergvill Subject: WINCE device was: Re: HPLX-L Digest - 29 Jan 2002 to 30 Jan 2002 (#2002-34) MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit On Thu, 31 Jan 2002 16:52:17 +1100, Ray Roche wrote: > Ray Roche > Canberra > ACT > Australia > > HP200 for about 5 years, mainly for ham radio use. I also have several > HP WinCE machines but we won't talk about those, will we? What models do you have? I can get a Hp620 for free and was wondering if it can be used for anything. Hplx will be my main machine, but I want to surf the web with the Hp620 and maybe access my online bank which needs to download a certificate first. Not sure if this can be done with a 620lx? Please let me know what model you have and if you have a 620lx let me know what it can be used for. (Not interested in comparing a 620LX vs Hp200LX, but only what can I do that is usefull that the Hp200LX can not do) TIA -- Martin Bergvill ,Narvik Norway ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 31 Jan 2002 22:06:24 +0100 Reply-To: Ulrich Boche Sender: HPLX Mailing List From: Ulrich Boche Subject: Re: Around The World In 80 Minutes? Comments: To: Daniel Hertrich MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii On Tuesday, 29.01.2002 at 08:37 ZE2, Daniel Hertrich wrote: > On Mon, 28 Jan 2002 20:37:22 +0000, Gottfried Burckhardt > wrote: > > > Native Swabian (call it German Indian ) > > LOL! Well, you know, they don't speak Hochdeutsch, after all :-) Ulrich Boche ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 01:09:12 -0800 Reply-To: xy mox Sender: HPLX Mailing List From: xy mox Subject: charging won't work Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed hmm. hmm... really want to cry.... my 200 with me around 7 year and i charging it every two week. last night, dunno y i try plug a adaptor for recharging. when i open charge-it, it said not charging.... hmm.. so i think my machine internal power module have problem. even i replace other new AC adaptor. any1 can help? thank. Billy ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 23:03:02 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Idea: eMail->SUPER->File->email MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Fri, 1 Feb 2002 22:40:41 +1300 (NZDT) 03h52m44s ago ... On Fri, 1 Feb 2002 07:47:57 +0200, Daniel Hertrich wrote: > http://www.palmtop.net/anonftp/pub/İfilename¨ > > If you use Roboweb/lX, the procedure is pretty much the > same as you watned: You can have a template "email" with > URL etc. and only have to add the file name you want to > downlaod. Then "send" the mail and as a result you will > have the file in your inbox. >> Tony, would that work? I have never tried that procedure > for larger files, let alone ZIP files. Would they "come > in" as an email attachment? Daniel, yup - all you need in the outbox is a message with these headers From: ROBOWEB/LX To: www.palmtop.net/anonftp/pub/İfilename¨ Subject: Super template (replace filename in To:) In the inbox you'll get a message telling that a binary file has been downloaded, and how to access it - normally just run the external RWEBFILE and have PNS200 decide what to do with it. Files don't come is attachments - they are "detached" files in a specified directory - they have the same extension as the original but are otherwise numbered in a sequential way. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 13:26:30 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Paulo Custodio wrote: > Any success of running PIM/PE with palrun on a Windows > NT machine? > > I'm running on NT 4, and starting PE with: palrun -p pe.exe I'm almost sure, NT is the problem. DOS under NT is not like DOS under WinXX. Unfortunately I know nothing about NT, have it not running and could not take precaution while improving PALRUN. Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 14:48:22 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Stefan, > > Any success of running PIM/PE with palrun on a Windows > > NT machine? > > > > I'm running on NT 4, and starting PE with: palrun -p pe.exe > > I'm almost sure, NT is the problem. DOS under NT is not like DOS > under WinXX. What do you mean with WinXX? Win2K? Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 16:36:53 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Stefan, > > I'm running on NT 4, and starting PE with: palrun -p pe.exe > > I'm almost sure, NT is the problem. DOS under NT is not like DOS > under WinXX. Unfortunately I know nothing about NT, have it not > running and could not take precaution while improving PALRUN. I just did try to run palrun -v-p-w pe.exe, (or -p-w, or -p) using Win98SE. After Alt-Enter a popup says verbaly: Sie kvnnen diese Grafikanwendung nicht in einem Fenster ausf|hren. Die Anwendung wird angehalten, bis Sie sie mit Alt_Eingabe maximieren. Stellen Sie sicher, da_ die Eigenschaften richtig sind. Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 11:02:04 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: WINCE device was: Re: HPLX-L Digest - 29 Jan 2002 to 30 Jan 2002 (#2002-34) Comments: To: Martin Bergvill In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > What models do you have? I can get a Hp620 for free and was > wondering > if it can be used for anything. Hplx will be my main machine, but I > want to surf the web with the Hp620 and maybe access my online bank > which needs to download a certificate first. Not sure if this can be snip > Hp200LX, but only what can I do that is usefull that the Hp200LX can > not do) > Take it if it's free! I find my Nino 200 useful as a book reader because it has backlighting. It also has a voice recorder and freehand note taker that is kinda nice. You may find the 620 good for things that need color or freehand drawing with a pen. You may want to get a copy of XTCE or pocket DOS and then be able to run many of the programs you run on the LX. You can put Caldera DOS on there and get something like 700K free memory. If you don't like you can sell it to me reallly cheeeeep ;¬> BTW:I have XTCE on my nino but it's kinda silly without a keyboard. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 11:40:47 -0500 Reply-To: Bob Penick Sender: HPLX Mailing List From: Bob Penick Subject: Re: Short battery life in an upgraded 200lx Comments: To: Paulo Custodio MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit ----- Original Message ----- From: "Paulo Custodio" Sent: Thursday, January 31, 2002 7:52 PM Subject: Re: Short battery life in an upgraded 200lx I have the same experience. Since I upgraded to double speed 32M and Software Carousel, I have seen the battery life being cut in half. I use NiMH 1500mAh, that I recharge in the Palmtop and they last for about 2 days of intensive use, or 5-6 hours of continuous use. But I strongly recommend the upgrade. The shorter battery life is largely compensated with all the new things that can be done with the palmtop. Regards, Paulo *********************************** Paulo, I also recommend the double speed and memory upgrades if you can afford them. But, I think you may have misunderstood my question. I had already been using a doublespeed 32M 200lx and moved to a 96M doublespeed. I had been thinking that the doublespeed conversion was what caused a slight decrease in battery life. I didn't realize that them memory size would have much effect. I was wondering if I had a "problem" palmtop. But, Dale says his battery expectancy is similar to mine, so I guess that's the cost of having all that space to keep things close at hand. Thanks, bob ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 12:00:25 -0500 Reply-To: Kimberly Allegretto Sender: HPLX Mailing List From: Kimberly Allegretto Subject: Re: Gender? (RE: Around The World Comments: To: Ed Padin In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hmm.... in that case, maybe marital status would be important too... Mrs. Allegretto Sorry Ed :) Quoting Ed Padin : > We should include gender. I know you can usuall tell from the names > but I do remember a list member named beverly-something that was a > guy...I think some dude tried flirting with him :-o .... ;¬>. Us > yanks mostly use that as a female name. > > Later. > > So, Kimberly, you wanna go out for coffee? ;¬P > > > > > > -----Original Message----- > > From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On > > Behalf Of > > Kimberly Allegretto > > Sent: Thursday, January 31, 2002 3:18 PM > > To: HPLX-L@uconnvm.uconn.edu > > Subject: Re: Around The World > > > > > > Kim Allegretto > > Massachusetts, US > > 200-LX > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 14:48:22 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Stefan, > > Any success of running PIM/PE with palrun on a Windows > > NT machine? > > > > I'm running on NT 4, and starting PE with: palrun -p pe.exe > > I'm almost sure, NT is the problem. DOS under NT is not like DOS > under WinXX. What do you mean with WinXX? Win2K? Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 13:26:30 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Paulo Custodio wrote: > Any success of running PIM/PE with palrun on a Windows > NT machine? > > I'm running on NT 4, and starting PE with: palrun -p pe.exe I'm almost sure, NT is the problem. DOS under NT is not like DOS under WinXX. Unfortunately I know nothing about NT, have it not running and could not take precaution while improving PALRUN. Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 19:15:02 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: charging won't work MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hello On Fri, 1 Feb 2002 01:09:12 -0800, xy mox wrote: > hmm. hmm... really want to cry.... > my 200 with me around 7 year and i charging it > every two week. last night, dunno y i try plug a adaptor for > recharging. when i open charge-it, it said not charging.... > hmm.. so i think my machine internal power module > have problem. even i replace other new AC adaptor. Probably not an electronics problem (if you didn't recognize any strange behaviour like buzzing noise, extensive heat....). I assume there is simply one of the two thin wires broken which connect the power jack with the mainboard. Do you have any palmtop hardware skills? If you are able to open the LX, it's not such a big deal to resolder the wire if it's broken. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 01:09:12 -0800 Reply-To: xy mox Sender: HPLX Mailing List From: xy mox Subject: charging won't work Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed hmm. hmm... really want to cry.... my 200 with me around 7 year and i charging it every two week. last night, dunno y i try plug a adaptor for recharging. when i open charge-it, it said not charging.... hmm.. so i think my machine internal power module have problem. even i replace other new AC adaptor. any1 can help? thank. Billy ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 19:39:45 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: CF to PCMCIA adapter ( Plus discounted Doubleslots ) at Accurite MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit For those who were discussing a CF to PCMCIA adapter... Accurite has them available now ( at a steep price, $59) And the Doubleslot for the 200LX has been discounted to $99 Michel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 14:02:09 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: Gender? (RE: Around The World Comments: To: Kimberly Allegretto In-Reply-To: <1012582825.3c5ac9a983d76@imap.grad.brandeis.edu> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > Hmm.... in that case, maybe marital status would be important too... > > Mrs. Allegretto > > Sorry Ed :) :-O Please forgive my forwardness, Mrs. Allegretto. I assure you it was only in jest. ;¬> The only REAL flirtin' I do nowadays is with my wife and baby girl. (I think VIRTUAL flirtin' is still safe and mostly harmless) That not withstanding, perhaps marital/family status, age, occupation would be also be nice to include. Of course, then we're running up against privacy concerns... ah, whatever . ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 31 Jan 2002 19:52:52 -0500 Reply-To: Paulo Custodio Sender: HPLX Mailing List From: Paulo Custodio Subject: Re: Short battery life in an upgraded 200lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable I have the same experience. Since I upgraded to double speed 32M and Software Carousel, I have seen the battery life being cut in half. I use NiMH 1500mAh, that I recharge in the Palmtop and they last for about 2 days of intensive use, or 5-6 hours of continuous use. Maybe the decrease in battery life is also related to the amount of work that the CPU has to do: now I do a lot more stuff in the palmtop than I used to do before - I have one session with HP PIM, one with PIM/PE, one with TimeTacker/LX, MindMap/LX, Post/LX, ... and I am constantly switching over between sessions. But I strongly recommend the upgrade. The shorter battery life is largely compensated with all the new things that can be done with the palmtop. Regards, Paulo ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 08:46:40 +0200 Reply-To: Rian Maartens Sender: HPLX Mailing List Comments: To: "Batson, Dale N" From: Rian Maartens Subject: Re: Short battery life in an upgraded 200lx MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I have a 2MB ds 32MB 200lx and a 4MB ds 32mb 200lx. The 2MB gives me more battery life than the 4MB which implies that all double speed 32MB does not use the same power and that the pre-upgrade memory also plays a role. All the best Rian Maartens Cape Town, RSA ----- Original Message ----- From: Batson, Dale N To: Sent: Friday, February 01, 2002 1:27 AM Subject: Re: Short battery life in an upgraded 200lx Bob, I have a DS 96MB 200LX and its battery life has been pretty close to yours. I tried using 1700mAH NiMH batteries for a while, but they discharged so quickly I grew tired of recharging them and went back to using Lithium batteries. I also have a SS 1MB 100LX -- its batteries last MUCH longer. Dale Batson ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 31 Jan 2002 22:45:48 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Idea: eMail->SUPER->File->email MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Problem: I want a file that is on SUPER. Since HV doesn't work with my ISP I have to use another pc to logon to the net, surf to SUPER, find the file and download it, connect my 200LX to that pc, and transfer the file to the LX. There are some features that can speed up parts of this (pc card readers vs. cpack serial connection) but it still ends up being a multi-step process. Idea: I wish I could send an email to SUPER with a command similar to: GET fn.ext ..and SUPER would send me back an email with that file as an attachment. Since I use WWW/LX for email I would receive it on the LX and eliminate all the transfer bothers of my previous description. It would also mean I could easily obtain SUPER files when traveling when pc->LX transfer connections might not be available. I expect this would only work for files kept at the SUPER site and not those pointed to from SUPER. Comments? Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 07:47:57 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Idea: eMail->SUPER->File->email MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Russel On Thu, 31 Jan 2002 22:45:48 +0000, Russel Brooks wrote: > Problem: > I want a file that is on SUPER. Since HV doesn't work with my > ISP I have to use another pc to logon to the net, surf to SUPER, > find the file and download it, connect my 200LX to that pc, and > transfer the file to the LX. There are some features that can > speed up parts of this (pc card readers vs. cpack serial > connection) but it still ends up being a multi-step process. > > Idea: > I wish I could send an email to SUPER with a command similar to: > > GET fn.ext I see from your mail header you use Post/LX 2.2g, so you must have WWW/LX, Then this should work for you: 1. Download SUPER.GDB from SUPER. this contains all SUPER entries, so you canbrowse and search offline and find out the exact file name for what you need. 2. Use Roboweb or even only get.exe with WWW/LX and let it download http://www.palmtop.net/anonftp/pub/İfilename¨ If you use Roboweb/lX, the procedure is pretty much the same as you watned: You can have a template "email" with URL etc. and only have to add the file name you want to downlaod. Then "send" the mail and as a result you will have the file in your inbox. Tony, would that work? I have never tried that procedure for larger files, let alone ZIP files. Would they "come in" as an email attachment? GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 14:49:14 -0500 Reply-To: albert.kind@uconn.edu Sender: HPLX Mailing List From: Al Kind Subject: Jan Logs available MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Woah! This hase to be a record for me...available on the 1st of the month ;-) Cheers...AJKind -- Al Kind Technical Lab Manager, Microchemistry Lab CANR 3113 Horsebarn U4193, Storrs CT 06269-4193 ph (860)486-6126 eFAX (413)826-8780 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 14:49:15 -0500 Reply-To: albert.kind@uconn.edu Sender: HPLX Mailing List From: Al Kind Subject: FW: CONFIRM renewl MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I have requested this for HPLX-L Cheers...AJKind -----Original Message----- From: LISTSMNT@UConnVM.UConn.Edu İmailto:LISTSMNT@UConnVM.UConn.Edu¨ Sent: Wednesday, January 30, 2002 1:38 PM To: albert.kind@uconn.edu Subject: Re: CONFIRM renewl Yes, the renewal process is set to 12 months. That's from the time you subscribe or renew. Because listserv generates a random confirmation code at the time of renwal, I don't know how you would renew ahead of time. I do have an option though. There's a new automatic 'Probe' option which attaches a probe to certain pieces of mail sent to list subscribers. If the probe reaches an invalid address, then Listserv starts monitoring that address. Basically, it automatically deletes invalid addresses. With this option set, the renewal process is not needed. We can just turn it off. If you want, send me a list of your lists and I'll set them up with the 'Probe' option and then you won't have to worry about the renewal process anymore... ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 15:31:52 -0500 Reply-To: Martin Bergvill Sender: HPLX Mailing List From: Martin Bergvill Subject: Re: CF Capability MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit On Wed, 30 Jan 2002 21:43:02 +0100, Yves Leurquin wrote: > > Perhaps, but I suppose it risks to interfere with some others disks > > drivers, such as Stacker/Jam (but is it needed when you have a 256 Mb > > disk ), or the SECDEV encryption driver which I use to store some > > sensitive files... > > > > Do anybody has tried that ? > > I use all of these (JAM, Secdev, CF512MB+Driver and SC) and have had no > problem so far. Have you tried to have a Jamdrive in one area only of SC? I tried that but the Hplx hangs. Regards -- Martin Bergvill ,Narvik Norway ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 21:56:50 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Re: Jan Logs available Comments: To: albert.kind@uconn.edu MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Pity it is just the feb 2001 log... ----- Original Message ----- From: "Al Kind" To: Sent: Friday, February 01, 2002 8:49 PM Subject: Jan Logs available > Woah! This hase to be a record for me...available on the 1st of the month > ;-) > > Cheers...AJKind > -- > Al Kind > Technical Lab Manager, Microchemistry Lab CANR > 3113 Horsebarn U4193, Storrs CT 06269-4193 > ph (860)486-6126 eFAX (413)826-8780 > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 10:10:56 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Doubled replies from HPLX-L ? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sat, 2 Feb 2002 10:02:09 +1300 (NZDT) 18h48m57s ago ... On Fri, 1 Feb 2002 10:13:12 +0800, Adrian Ho wrote: > On Fri, Feb 01, 2002 at 02:02:00AM +0000, Russel Brooks wrote: > > This just started in the last hour. Is the server ill? > > No, neosiam@singnet.com.sg is looping mail back to the list > (or at least that's what the headers of the duplicate mail > suggest). I've dropped him/her a note about it. Adrian, did you get a reply? It still seems to be happening here. Might be best for Al to take that address off the list for the moment? - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 22:23:06 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: Short battery life in an upgraded 200lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Rian Maartens wrote: > I have a 2MB ds 32MB 200lx and a 4MB ds 32mb 200lx. The 2MB > gives me more battery life than the 4MB which > implies that all double speed 32MB does not use the same power > and that the pre-upgrade memory also plays a role. I thought when a factory 4M gets upgraded to 32M it loses its extra 2M and ends up 32M+2M, the same a 2M unit would. I thought I read that in one of Thadeus' catalogs but I can't find that statement in their web catalog. Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 17:29:55 -0500 Reply-To: albert.kind@uconn.edu Sender: HPLX Mailing List From: Al Kind Subject: Re: Jan Logs available...Sorry! In-Reply-To: <002201c1ab62$f8efe2e0$3876a63e@bel> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Oops, seems the server sent me the wrong file...curious?? Anyway, Fixed now...I Hope!!! Cheers...AJKind -----Original Message----- From: Michel Bel İmailto:michel.bel@zonnet.nl¨ Sent: Friday, February 01, 2002 3:57 PM To: albert.kind@uconn.edu; HPLX-L@UCONNVM.UCONN.EDU Subject: Re: Jan Logs available Pity it is just the feb 2001 log... ----- Original Message ----- From: "Al Kind" To: Sent: Friday, February 01, 2002 8:49 PM Subject: Jan Logs available > Woah! This hase to be a record for me...available on the 1st of the month > ;-) > > Cheers...AJKind > -- > Al Kind > Technical Lab Manager, Microchemistry Lab CANR > 3113 Horsebarn U4193, Storrs CT 06269-4193 > ph (860)486-6126 eFAX (413)826-8780 > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 11:51:43 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Idea: eMail->SUPER->File->email MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sat, 2 Feb 2002 11:44:30 +1300 (NZDT) 16h56m33s ago ... On Fri, 1 Feb 2002 07:47:57 +0200, Daniel Hertrich wrote: > http://www.palmtop.net/anonftp/pub/İfilename¨ > Tony, would that work? Daniel, it would I think but I can't test it because www.palmtop.net seems to be down :-( Or, it could be my typing I was going to try something like this: From: ROBOWEB/LX To: www.palmtop.net/cgi-bin/search.pl?keyword=robo*. Subject: Super search I'll need to experiment with the right wording after the .pl? Could be a useful one for the RWEB.O in ROBOWEB/LX - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 00:45:22 +0000 Reply-To: castorlw@YAHOO.COM Sender: HPLX Mailing List From: Larry Castor Subject: Re: Idea: eMail->SUPER->File->email MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Russ, > Are there anyother ATTGlobal customers? Does HV work now? > I'm using ATTWorld and HV works fine. Using wwwlx Version3. I'm not = sure what the difference is between ATTGlobal and ATTWorld. Larry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 04:36:27 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: CF to PCMCIA adapter ( Plus discounted Doubleslots ) at Accurite Comments: To: Michel Bel MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > For those who were discussing a CF to PCMCIA adapter... > Accurite has them available now ( at a steep price, $59) Thanks for that info. I'm one of those looking for such an adapter. I wonder if a full pcmcia needs the ac adapter it comes with. It is a bit large. Wonder if it could also replace the other item you mentioned as a powered single slot in the HP, altho, cumbersome by using a cf adapter and plugging this into that and then a pcmcia device (like modem) into that dongling mess (G) > And the Doubleslot for the 200LX has been discounted to $99 The end of another road for the hp200 line. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 01:06:43 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: HP LX Program Requests : Possible SUPER Enhancement. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I was thinking that there appears to be a number of people on this forum that still write programs for the 200LX. I thought that it might be good to open this question to the forum: ===> What program do you feel the HP200LX is missing that has not already been written or is not available in a DOS format? I think it would be good to see if there is enough interest in certain applications, then perhaps aspiring 200LX programmers may eventually write them. The forum seems a good place to discuss such a thing. For future reference, a page on SUPER for "Program requests" and the ability to cast votes for listed programs may help us all to define what it is that the 200LX lacks, and again, perhaps inspire someone to write it. Please posts your thoughts, sugggestions or "requests:.... PS(I personally would love to see more games that run fast on the 200LX, but are written so that they can be played in "less than perfect" light and played with only a few keys.. A good example would be Curtis Camerons card games. They are easy to read and interesting to play.) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 02:14:12 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Speed upgrade using standard 32Mhz XTAL Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Hi everyone! I'm planning to make the speed upgrade using a standard 32MHZ XTAL (perhaps SMD) and use the clkup32.sys japanese driver. I would like to hear comments from people that already did that. Disadvantages? Thanks. Dario -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Win a ski trip! http://www.nowcode.com/register.asp?affiliate=1net2phone3a ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 09:46:46 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Re: CF to PCMCIA adapter ( Plus discounted Doubleslots ) at Accurite MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Fjkaufman wrote: > Thanks for that info. I'm one of those looking for such an adapter. I > wonder if a full pcmcia needs the ac adapter it comes with. It is a bit > large. > I don't think it needs the adapter - it's just optional. IMHO you can use it to run e.g. the heavy 5GB Toshiba cards etc off the mains. A CF has all the lines an ATA card uses (just counted them in a technical Sandisk spec PDF) - not sure about the IO lines though. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 11:55:23 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Looking for software - Word 2.0 and Sandisk driver MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I am looking for 2 pieces of software: Winword 2.0 - which I registered a looong time ago, but of course lost the diskettes the last 10 years.. And a driver to run a 256MB Sandisk PCMCIA on a DS 200LX. Any listmembers who can send me this SW? TIA, Michel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 12:35:53 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Speed upgrade using standard 32Mhz XTAL MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Dario On Sat, 2 Feb 2002 02:14:12 -0500, Dario Draiman wrote: > I'm planning to make the speed upgrade using a standard 32MHZ XTAL (perhaps SMD) and use the clkup32.sys japanese driver. > I would like to hear comments from people that already did that. Disadvantages? It works in general. I have upgraded my brother's 100LX with such a crystal. But I exchanged it short time later with a Times2Tech one. I think he wasn't able to use the serial port or so - cannot remember exactly what the problem was. I may be that you will have problems using time-critical things like serial port / IR port communications or some PCMCIA cards. That's all I can say about this, no further personal experience using such an upgrade, so I would suggest that you do the upgrade, observe what problems you have, report them here (;-) ) and then downgrade again if you feel you can live with the disadvantages. Or replace the crystal and driver by the Times2Tech ones (ah, you cannot do maney orders to other countries - yes.... but you could send your LX to somewhere else (Thaddeus?) and include cash, couldn't you? Maybe there are only minor disadvantages. The Japanese seem to be satisfied with their 32MHz upgrade. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 12:42:18 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Helmuth E. Guenther wrote: > > I'm almost sure, NT is the problem. DOS under NT is not like DOS > > under WinXX. > > What do you mean with WinXX? Win2K? I tested PALRUN under Win95. And Win98 should make no big difference, but Win2000 or XP, I don't know? It all depends on the available DOS shell, and the later the Win Version, the less DOS support. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 21:43:07 +0800 Reply-To: Adrian Ho Sender: HPLX Mailing List From: Adrian Ho Subject: Re: Doubled replies from HPLX-L ? In-Reply-To: ; from th@PARADISE.NET.NZ on Sat, Feb 02, 2002 at 10:10:56AM +1300 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii On Sat, Feb 02, 2002 at 10:10:56AM +1300, Tony Hutchins wrote: > Adrian, did you get a reply? Yeah, and according to him, he downloaded his messages about 4 hours /after/ the mail loop started. It's starting to sound more like a botched config change @ SingNet (not entirely surprising, considering they lost arguably their best admin years ago). > It still seems to be happening here. Seems to have stopped for me. - Adrian ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 09:15:00 EST Reply-To: TCU549@AOL.COM Sender: HPLX Mailing List From: Kat Doyle Subject: Fwd: Re:Gender? (RE: Around The World MIME-Version: 1.0 Content-type: multipart/mixed; boundary="part1_d.217c4b37.298d4e64_boundary" --part1_d.217c4b37.298d4e64_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit --part1_d.217c4b37.298d4e64_boundary Content-Type: message/rfc822 Content-Disposition: inline Return-Path: Received: from twap (twap-d02.dial.aol.com İ205.188.76.66¨) by air-id09.mx.aol.com (v82.22) with ESMTP id MAILINID93-0202091352; Sat, 02 Feb 2002 09:13:52 -0500 Date: Sat, 02 Feb 2002 09:13:52 EST From: TCU549@aol.com To: allegret@BRANDEIS.EDU Cc: Subject: Re:Gender? (RE: Around The World X-Mailer: AOL Mobile Communicator 1.1 X-Twap-Composition-ID: 690669386 Message-ID: <23.18914864.298d4e20@aol.com> Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I think we can safely assume that most of us are either male or female :-) Kat Ambiguous marital status --part1_d.217c4b37.298d4e64_boundary-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 15:20:23 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: ANN: LxPic 7.0 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable After one year of development I finally finished LxPic V7.0, which is a major release. Many improvements are desktop related, but as I know, most of you use LxPic as their preferred viewer on desktops too. - High (64K) and True color (16.7M) screen modes up to 2048x1536 resolution with 32 bit colordepth - VBE3 (VESA Bios Extension 3.0) compatible - Improved JPEG display quality - Improved JPEG VESA auto zoom (100% screen fit) - All JPEG subsamlings supported in VESA modes - 16 bit dither for true color JPEG in 64K modes - Multi image GIF improved and running endless - GIF transparent color supported - New 800x600x4 VGA mode (Command line switch /5) - F5 scans all drives from Z-A for available images (Command line switch /!) - Shift F5 scans all drives from A-Z - ESC skips one drive during drive scans - Ctrl-C exits LxPic immediately from drive scans - {A} autozooms only images bigger than the screen - {a} autozooms all images - {#} toggles between best and startup screen mode - /# starts LxPic in the best available screen mode - /* displays all available screen modes - TAB shells into the directory of the actual image - Alt-B inverts screen background color (Command line switch /b) - Save screen as B&W PCX moved from F5 to Shift F4 - Alt F4 saves the image as B&W Palmtop ICN file - BS key displays previous image (same as {P} key) - Load time displayed in the File Info Box - Picture date displayed in the File Info Box - BitBlt support on the HP Palmtop - Build in VESA character generator - Alt-6 toggles between 1024x768 and 1024x600 pixel resolution (useful for Toshiba Portege 300CT) - Alt-A (Art) omits resetting the VESA screen - Alt-G multi image GIF background toggle - Alt-R Raster zoom-in for JPEG in VESA modes - F9 UXGA VESA mode enable/disable toggle - Rename {N} works now under Windows - No more Casio CAM and Kodak IMG support I'd like to thank Tamas Feher for pushing me again and again and for beta testing. I hope he doesn't mind, that only a fraction of his suggestions made it in the new version, but I didn't want to develop another year ;-) And many thanks to Steve Novosad for a collection of strange GIFs, which improved the GIF part of the new LxPic. NOTE: LxPic still does not support progressive JPEG and interlaced GIFs. Both formats are false moves IMHO from a technical point of view, because these formats push the memory and processor demands higher and higher. In order to process a progressive JPEG I need a buffer with 2 bytes for every pixel, holding the coefficients for the cosine transform to be refined in every of the up to 6 scans. For a small 640x480 VGA size image, this is already a buffer of 600KB which I generally don't have. If it comes to 2 Mega pixel camera images, I need a 4MB buffer and so on... Besides, progressive JPEG are bigger than baseline JPEG and need to be decoded up to 6 times instead of only once, slowing down the performance drastically on older processors. Similar applies to interlace GIFs, even if the needed buffers are smaller. I decided to keep LxPic the smallest picture viewer around with a minimal demand on memory of only 64KB, independent of the picture dimensions. Please try to go the "right" way by avoiding progressive JPEG and interlaced GIF whenever you can. Doing so, you not only act LxPic friendly, but you also qualify as a person knowing the technical background. Because of a different memory management of the new LxPic, I had to adjust LxMap to work with LxPic >=3D 7.0. The advantage of the new LxMap is now, that maps may also be in GIF or JPG format. However, my recommendation are still B&W PCX maps for speed reasons. Download LxPic from: http://peichl.hplx.net/lxpic.zip or soon from the S.U.P.E.R. site Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 16:12:25 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: ANN: LxPic 7.0 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends On Sat, 2 Feb 2002 15:20:23 +0000, Stefan Peichl wrote: > After one year of development I finally finished LxPic V7.0, > which is a major release. GREAT! :-) > Download LxPic from: > > http://peichl.hplx.net/lxpic.zip hplx.net and palmtop.net are currently not available. Don't know why, maybe the web server is down. The machine itself is OK, I could access it for SUPER maintenance. So rather download from the actual URL http://home.t-online.de/home/stefan.peichl/lxpic.zip > or soon from the S.U.P.E.R. site I will put it on SUPER today. As soon as SUPER is available again, it will be there. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 18:27:37 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Stefan Peichl wrote: > > Helmuth E. Guenther wrote: > > > > I'm almost sure, NT is the problem. DOS under NT is not like DOS > > > under WinXX. > > > > What do you mean with WinXX? Win2K? > > I tested PALRUN under Win95. And Win98 should make no big > difference, but Win2000 or XP, I don't know? It all depends > on the available DOS shell, and the later the Win Version, > the less DOS support. The latest PALRUN runs fine on WinNT. I will test it on Win2000 as well but I do not expect any bad surprises. HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 08:15:22 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Doubled replies from HPLX-L ? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sun, 3 Feb 2002 07:58:37 +1300 (NZDT) 05h15m30s ago ... On Sat, 2 Feb 2002 21:43:07 +0800, Adrian Ho wrote: > On Sat, Feb 02, 2002 at 10:10:56AM +1300, Tony Hutchins wrote: > > Adrian, did you get a reply? > > Yeah, and according to him, he downloaded his messages about 4 > hours /after/ the mail loop started. It's starting to sound > more like a botched config change @ SingNet (not entirely > surprising, considering they lost arguably their best admin > years ago). Interesting! Was that you ;-) > > It still seems to be happening here. > > Seems to have stopped for me. Same here. It stopped soon after I posted. Up to then I had started getting trebling of some messages. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 08:15:25 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: ANN: LxPic 7.0 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sun, 3 Feb 2002 08:10:47 +1300 (NZDT) 04h58m22s ago ... On Sat, 2 Feb 2002 16:12:25 +0200, Daniel Hertrich wrote: > Hi friends > > On Sat, 2 Feb 2002 15:20:23 +0000, Stefan Peichl wrote: > > > After one year of development I finally finished LxPic V7.0, > > which is a major release. > > GREAT! :-) I second that! :) > So rather download from the actual URL > http://home.t-online.de/home/stefan.peichl/lxpic.zip Daniel, I tried this and can't seem to pkunzip the file. Does it unzip Ok for you? Thanks for all your work with www.palmtop.net, BTW. You must have a magic method of access as well :) -Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 21:17:14 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Stefan Peichl wrote: > > I tested PALRUN under Win95. And Win98 should make no big > difference, but Win2000 or XP, I don't know? It all depends > on the available DOS shell, and the later the Win Version, > the less DOS support. This is to confirm that the latest PALRUN runs fine on WinNT and Win2000. HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 21:48:11 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: ANN: LxPic 7.0 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Tony On Sun, 3 Feb 2002 08:15:25 +1300, Tony Hutchins wrote: > Daniel, I tried this and can't seem to pkunzip the file. Does > it unzip Ok for you? Yes. No problems. > Thanks for all your work with www.palmtop.net, BTW. You must > have a magic method of access as well :) Yes. I always let magic work for me. :-) GTX daniel P.S.: Haven't had enough magic to put the new LXPIC on SUPER today. Will do that tomorrow. Don't know anything about the state of accessability of palmtop.net, anyway. -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 21:48:12 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: WWW/LX connection problems MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, am I the only one who sees this? When I establish a connection with F5, no matter which setup and which hardware (modem / mobile / direct serial line) I use, I can send / retrieve email only ONCE. If I have done it and spend a few minutes writing a reply, for example, connection is still active, and if I then press F5 again, so that the mail boxes are "visited" again, but of course without establishing a new connection (the modem LEDs still show an active connection and the connection name in the title line of Post/LX still is black on white i.e. active), Post/LX gets stuck with "waiting for response from SMTP server" or, if I unselect upload, "waiting for response from POP server". No matter which email boxes (i.e. mail servers) I mark for visit. So it must be a connection problem, not a mail server problem. I have to disconnect and reconnect in order to be able to up/download email again. Anyone has an idea? Thank you daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 22:00:19 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hans Peter, I wonder what we do wrong here in window mode? It is running fine here too, but only in in full screen mode. Kind regards Helmuth > > I tested PALRUN under Win95. And Win98 should make no big > > difference, but Win2000 or XP, I don't know? It all depends > > on the available DOS shell, and the later the Win Version, > > the less DOS support. > > This is to confirm that the latest PALRUN runs fine on WinNT and > Win2000. > > HP Staber/Salzburg > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 22:03:56 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: WWW/LX connection problems MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > am I the only one who sees this? Do you use maxdos? Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 22:57:05 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: ANN: LxPic 7.0 Comments: To: Stefan.Peichl@T-ONLINE.DE MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Stefan Peichl wrote: > After one year of development I finally finished LxPic V7.0, Thank you! Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 18:40:40 -0500 Reply-To: Martin Bergvill Sender: HPLX Mailing List From: Martin Bergvill Subject: Orinoco wireless lan? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Somebody was talking about wireless lan vs a Ipaq on a norwegian pda newsgroup. I asked for dosdrives and webadresses and got this: http://www.wavelan.com I went to the website but the Pcmcia card draws too much power. According to the pdf it says it uses 185mA in receiver mode and 285mA in send mode. :-( According to the guy that provided the link they have dos drivers. But I could not find anything about it on the spec sheet. I have not searched the website though. Regards -- Martin Bergvill ,Narvik Norway ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 19:12:04 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: LxPic 7.0 In-Reply-To: <16X11Y-1H8VeaC@fwd06.sul.t-online.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit You are one the biggest contributors to this community. Thanks. > > > After one year of development I finally finished LxPic V7.0, > which is a major release. > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 08:59:39 +0800 Reply-To: Adrian Ho Sender: HPLX Mailing List From: Adrian Ho Subject: Re: Doubled replies from HPLX-L ? In-Reply-To: ; from th@PARADISE.NET.NZ on Sun, Feb 03, 2002 at 08:15:22AM +1300 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii On Sun, Feb 03, 2002 at 08:15:22AM +1300, Tony Hutchins wrote: > On Sat, 2 Feb 2002 21:43:07 +0800, Adrian Ho wrote: > > > Yeah, and according to him, he downloaded his messages about 4 > > hours /after/ the mail loop started. It's starting to sound > > more like a botched config change @ SingNet (not entirely > > surprising, considering they lost arguably their best admin > > years ago). > > Interesting! Was that you ;-) No, but thanks for the (implied) compliment. 8-) I just happen to know the guy personally -- he's now working @ Nominum (a.k.a. the BIND company). While he was @ SingNet, he used a combo of Digital Alpha boxes, sendmail and BIND, and it all hung together nicely. Now, AFAICT, it's Wintel...and a house of cards. - Adrian ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 20:24:54 -0500 Reply-To: steve@CARDERFAMILY.NET Sender: HPLX Mailing List From: Steve Carder Subject: Re: WWW/LX connection problems MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > When I establish a connection with F5, no matter which setup and which > hardware (modem / mobile / direct serial line) I use, I can send / > retrieve email only ONCE. Perhaps something has happened to your *.cfg file and now Post/LX thinks = it is un-registered. Sending just one E-mail sounds like the program is in = demo mode. Steve Carder PGP public key on the server at http://pgp.mit.edu ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Feb 2002 18:41:09 -0800 Reply-To: bobv Sender: HPLX Mailing List From: bobv Subject: Re: Short battery life in an upgraded 200lx MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Bob, I had a similar problem. Finally stopped using the machine because the battery life was so short. Thinking I need to send it in. Bob ----------- Through lucky circumstances I was able to acquire a 200lx that had been upgraded to 96M from Thaddeus last October. I was able to put my 32M in the drawer as "backup". Since the change I have noticed significantly shorter battery life. With the 32M unit I consistently got 3 to 4 weeks from alkaline batteries and maybe 6 to 7 weeks using lithiums. With my new unit I am getting 1 to 2 weeks with the alkalines and 2 to 3 with lithiums. The 32M 200lx used batteries at about the same rate as the 4M I had before it. The decreased battery life of half what I've been accustomed to has been a shock. I know that there are a few other 96M users on the list. Have you had similar experiences, or do I need to send this one back the Thaddeus for a checkup? Thanks, bob For what it's worth, both the 32M and the 96M have the doublespeed upgrades. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 2 Feb 2002 10:34:31 +0200 Reply-To: davidb@netmedia.net.il Sender: HPLX Mailing List From: David Becher Subject: Re: CONFIRM renewl Content-transfer-encoding: 7BIT With all this mail bouncing around with confirmations of list membership I have become confused. Should we be getting confirmation requests (I havent - only forwarded requests). When should we confirm if we havent received a confirmation request. I dont want to miss my daily "fix" of hplx list. -- ** David Becher ** davidb@netmedia.net.il davidb@cimatron.co.il ** www.cimatron.co.il ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 05:37:28 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Get HPLX-L Archive Zips from HPLX-L server? Comments: To: mchem1@uconnvm.uconn.edu MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Al, Is it possible to get the list archive Zip files via email by sending a command to the list server? I normally get them by downloading from the web site but via email might be more convenient at times. Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 02:52:39 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Commodore 64 & HP48 emulators Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Hi all! Does anyone knows about a C64 emulator that can work on the LX? Also it would be nice to have a HP48/49 emulator in the LX. I've read tht EMU48 became freeware and open source (only the DOS and Win98 versions, not the WINCE). Perhaps someone with programming skills could patch the source to make it work on the LX. What do you think? Dario -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Win a ski trip! http://www.nowcode.com/register.asp?affiliate=1net2phone3a ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 16:58:16 +0900 Reply-To: bobk2@MOTOMI.NET Sender: HPLX Mailing List From: Robert Kawaratani Subject: Re: SUPER site - JAPANESE projects please! Comments: To: Nathalie Bugeaud In-Reply-To: <00ad01c1a558$5341a280$f224fac1@oemcomputer> Content-Type: text/plain; charset=US-ASCII; format=flowed Mime-Version: 1.0 (Apple Message framework v480) Content-Transfer-Encoding: 7bit I 'll volunteer to help translating a few of these. If someone would post a list of the desired items and then we can parcel the workload out. Although I'm in the process of migrating to a Sony Clie for my main PDA, the HP200lx remains in my bag as there some things that can't be done with other small computers. On 2002.01.25, at 13:08, Nathalie Bugeaud wrote: >> So, please, Japanese geniuses, could you translate some of >> your software and docs / htmls to English please and allow me to >> put them on www.palmtop.net/super.html > > i would be interested in cooperating with Akio (chez- > aki@sky.sannet.ne.jp) > in translating the help files of software we use: > > MAXDOS > MOREEXM > TASKLIST > ZOOM > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 10:50:44 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: WWW/LX connection problems MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit On Sat, 2 Feb 2002 22:03:56 +0100, "Helmuth E. Guenther" wrote: > Do you use maxdos? For the editor, yes. Do you mean MaxDos swaps out the conection handling part of the software so that the connection is still there but not handled as it should be? Any ideas how to solve that problem? GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 10:50:45 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Orinoco wireless lan? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Martin On Sat, 2 Feb 2002 18:40:40 -0500, Martin Bergvill wrote: > I went to the website but the Pcmcia card draws too much power. > According to the pdf it says it uses 185mA in receiver mode and 285mA > in send mode. :-( > > According to the guy that provided the link they have dos drivers. But > I could not find anything about it on the spec sheet. I have not > searched the website though. A few days ago, I put a ZoomAir wireless lan card into the LX to see what happens. At lease LXCIC had no problems recognizing the card. It was a ZoomAir 4100 11Mbps 802.11b card with Intersil Prism2 chipset. This is "the other kind" of cards. (There are two major chipset manufacturers: Lucent (Orinoco) and Intersil (Prism2)). But I suspect that all wireless LAN cards have a too high power consumption. Here is what LXCIC said (lxcic /t): ZoomAir 11Mbps High Tuple 01 = 00 00 FF Tuple 17 = 67 5A 08 FF Tuple 1D = 01 67 5A 08 FF Tuple 15 = 05 00 5A 6F 6F 6D 41 69 72 20 31 31 4D 62 70 73 20 48 69 67 68 00 52 61 74 65 20 77 69 72 65 6C 65 73 73 20 4E 65 74 77 6F 72 6B 69 6E 67 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF Tuple 20 = 56 01 02 00 Tuple 21 = 06 00 Tuple 22 = 01 07 Tuple 22 = 02 40 42 0F 00 Tuple 22 = 02 80 84 1E 00 Tuple 22 = 03 07 Tuple 22 = 04 06 00 30 B4 01 00 06 Tuple 22 = 05 01 Tuple 1A = 03 01 E0 03 00 00 01 Tuple 1B = C1 01 19 76 C5 4B D5 19 36 36 05 46 7F FF FF LXCIC recignized the card corrctly as a networking card, since in my setcom.bat, when activated, it switched to the Ethernet PCMCIA card section. :-) So if we find DOS drivers, and if an access point is near the card, and if the DOS driver can switch on Power Saving mode of the card (which only lets the card use high transmit power if it's necessary, i.e. access point far away), we MAY have luck with wireless networking!! Since the Linux Wireless LAN drivers are open source, it should be no big problem for a C and networking expert to port the drivers to DOS, if there aren't already drivers available. Will have a look at the website you mentioned. Another issue is this: The ZoomAir, and at least the early Orinoco cards are 5V cards, which generaly work in the LX. But I think most newer wLAN cards (at least my new Compaq WL100 card) are 3.3V cards, which are not only electrically, but also mechanically different from 5V and 12V cards. This is to prevent the user from putting a 3.3V card into a slot which only provides 5V and 12C (as our HPLX does). It is something like a little hardware "key". GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 11:08:46 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: WWW/LX connection problems MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Steve On Sat, 2 Feb 2002 20:24:54 -0500, Steve Carder wrote: > Perhaps something has happened to your *.cfg file and now Post/LX thinks it is > un-registered. Sending just one E-mail sounds like the program is in demo > mode. No. Not only one email. I can transfer as much as I want in the first online run. I can transfer megabytes of email. But if the online run is over and I keep the connection alive, do something, and want to visit the mailboxes once more (without establishing a new connection, since the old one is still alive), I cannot connect to any mailserver. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 11:08:47 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: SUPER site - JAPANESE projects please! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Robert On Sun, 3 Feb 2002 16:58:16 +0900, Robert Kawaratani wrote: > I 'll volunteer to help translating a few of these. If someone would > post a list of the desired items and then we can parcel the workload > out. Although I'm in the process of migrating to a Sony Clie for my main > PDA, the HP200lx remains in my bag as there some things that can't be > done with other small computers. IMHO, it would be most interesting what all these programs on the VECTOR download site are for. Some seem to be quite interesting, from what I can tell from the file name. It would be great if you could translate at least some of the file descriptions on vector. The link to the vector download page is on www.palmtop.net, directly under the SUPER section. Thanks a lot! daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 11:26:24 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: WWW/LX connection problems MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Helmuth On Sun, 3 Feb 2002 10:50:44 +0200, Daniel Hertrich wrote: > > Do you use maxdos? > > Do you mean MaxDos swaps out the conection handling part of the > software so that the connection is still there but not handled as it > should be? You are absolutely right. I tried once more: Only after an editor call, i.e. only after maxdos has swapped out WWW/LX from memory, the connection is not recoverable. If I keep the connection alive for a qhile and press F5 again without having used maydos in between, the connection can be used without any problem. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 11:26:25 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Orinoco wireless lan? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Martin On Sat, 2 Feb 2002 18:40:40 -0500, Martin Bergvill wrote: > Somebody was talking about wireless lan vs a Ipaq on a norwegian pda > newsgroup. I asked for dosdrives and webadresses and got this: > > http://www.wavelan.com The exact URL for the DOS software is http://www.wavelan.com/template.html?section=m52&envelope=90&page=3275 Unfortunately, the page doesn't say anything about hardware requirements (386?). But at university we have Orinoco cards. Maybe I can test this driver on Thursday. I'll look out for DOS drivers for the Prism2 cards. If such a driver exists, I can test with my cards at home. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 11:50:58 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Helmuth E. Guenther wrote: > > Hans Peter, > > I wonder what we do wrong here in window mode? > > It is running fine here too, but only in in full screen mode. I always run it full screen - it never occured to me to have it in a window. I know that I have used the parameter to apply the rectangular Shape of the LX on my secretaries WinNT desktop. I used the default values on my W2k desktop yesterday and it worked right away - full screen of course. HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 12:24:08 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: SUPER update MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, SUPER update includes today some interesting pieces of software: 1. GEM: I found a pre-installed 200LX version of GEM at praktiker.at, an Austrian magazine. 2. New LXPIC version 7.0 3. GSMSSEND: an SMS sending tool which works without WWW/LX, but only for cable connections and SMS Text mode. 4. MochaPPP added as an offsite-file. BTW: www.palmtop.net is available again! Here is the complete new changelog: 30-JAN-02 DBF to HTML: contact email address fixed one appearance (v1) of J. Dybdahl's Diary (DIA) deleted 31-JAN-02 superfuncs.pl modified, so that there is always a blank line under a "screen capture" link. 01-FEB-02 Made GDB2TXT and "onsite file" with al ink to the author's homepage. updated LXSTAT to 2.0 beta version 02-FEB-02 added MochaPPP removed BatLog 1.4 (v2.2 still there) 03-FEB-02 added GEM for LX package updated lxpic to v7.0 added GSMSSEND -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 08:43:58 -0500 Reply-To: Andrew King Sender: HPLX Mailing List From: Andrew King Subject: Re: Orinocco drivers for DOS? How about Omnibooks? Comments: To: omnibook list MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit >Subject: Orinoco wireless lan? > Date: Sat, 2 Feb 2002 18:40:40 -0500 > From: Martin Bergvill >Somebody was talking about wireless lan vs a Ipaq on a norwegian pda >newsgroup. I asked for dosdrives and webadresses and got this: >http://www.wavelan.com >I went to the website but the Pcmcia card draws too much power. >According to the pdf it says it uses 185mA in receiver mode and 285mA >in send mode. :-( >According to the guy that provided the link they have dos drivers. But >I could not find anything about it on the spec sheet. I have not >searched the website though. >Regards >-- >Martin Bergvill ,Narvik Norway Martin I've been thinking about the Orinocco card LAN for my Omnibook. I already have the card in my IBM thinkpad 560X and would love to use it in my Omnibook 425. I use a Linksys wireless hub/switch. I don't think the palmtop would work without en externally powered PC card slot. Let me know If I can help. -- Andrew King Ann Arbor Michigan technology is the answer, what was the question? NOTE: E-MAIL ADDRESS CHANGE aking5@mediaone.net will expire end of February aking138269MI@comcast.net has been so bad that I'm shifting to aspk@earthlink.net But king@kingtech.org will always forward to wherever I am. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 08:47:24 -0600 Reply-To: Les Cohn Sender: HPLX Mailing List From: Les Cohn Subject: Poor Battery Life on DoubleSpeed 200LX MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit My 8MB Double Speed had very reduced battery life. Where I was experiencing 40+ hours with a standard 2MB (non-upgraded) HP200LX with alkaline batteries, my DS 8MB unit only lasted 6-7 hours. I sent the unit back to Thaddeus and they said they saw nothing wrong with it. I quit using the unit and went back to the non-upgraded 200LX. There's obviously a common power problem prevalent on these Double Speed units and not just the 32MB or 96MB units but even on the 8MB ones. Les Cohn ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 16:23:37 +0100 Reply-To: Denis BLANCHON Sender: HPLX Mailing List From: Denis BLANCHON Subject: Re: Around The World In 80 Minutes MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Denis BLANCHON Clermont-Ferrand, Auvergne, in the center of France married with a half-Belgian woman (Sugny, Ardennes) ----- Original Message ----- From: Bob Christopher To: Sent: Wednesday, January 23, 2002 4:27 PM Subject: Around The World In 80 Minutes? Maybe it's a good time to get all the listmembers to respond ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 09:23:05 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Looking for software - Word 2.0 and Sandisk driver MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Michel Bel wrote: > I am looking for 2 pieces of software: > Winword 2.0 - which I registered a looong time ago, but of > course lost the diskettes the last 10 years.. > And a driver to run a 256MB Sandisk PCMCIA on a DS 200LX. > Any listmembers who can send me this SW? I just got a 256 meg Sandisk compact flash card from Ebay and while I was waiting for it to get here I also intended to ask for this driver since there's a lot of talk about it here. But it was really bought for my Nex II mp3 player so I never got around to asking. When the card came I tried it in the 200lx and it works just fine. I can't see a problem. I didn't keep it in there very long so is it something I would have run into later? Or is it just the double speed units that have a problem? Mine is a single speed. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 16:58:23 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Palmtop dismantling advice Comments: To: mchem1@uconnvm.uconn.edu MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, especially Al ;-) I have put together a little photo love story. ;-) It describes the way I use to take apart palmtops, including screen and keyboard. Since I am asked so many times to assist in various hardware issues, I thought it would be good if there was a general description of this process. It is a little bit different in some parts compared to David's description, and in general, it consists of more pictures and less text than David's page. So if you plan to disassemble your palmtop, best is probably to read both David's and my page and choose the way you feel most comfortable with. There are links to David's page on my one. http://www.daniel-hertrich.de/repair/dismantle.shtml (it is a sub-page of http://www.daniel-hertrich.de/repair ) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 08:36:25 -0800 Reply-To: Ian Butler Sender: HPLX Mailing List From: Ian Butler Subject: Re: Looking for software - Word 2.0 and Sandisk driver In-Reply-To: <001f01c1abd8$4c8d5160$da76a63e@bel> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Sat, 2 Feb 2002, Michel Bel wrote: > I am looking for 2 pieces of software: > And a driver to run a 256MB Sandisk PCMCIA on a DS 200LX. > Any listmembers who can send me this SW? You can usually use a 256MB card in the 200LX without the driver. It's only for cards larger than 256MB that the driver seems to be necessary. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 17:54:19 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: ANN: LxPic 7.0 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Stefan, > After one year of development I finally finished LxPic V7.0, > which is a major release. Thank you very much. Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 17:54:20 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: WWW/LX connection problems MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Daniel, > > Do you use maxdos? > > For the editor, yes. > Do you mean MaxDos swaps out the conection handling part of the > software so that the connection is still there but not handled as it > should be? > > Any ideas how to solve that problem? Don't use maxdos! It depends how many TSRs you launch before. I think it should work without maxdos. Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 17:54:20 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hans Peter, > > I wonder what we do wrong here in window mode? > > > > It is running fine here too, but only in in full screen mode. > > I always run it full screen - it never occured to me to have it in a > window. > > I know that I have used the parameter to apply the rectangular Shape of > the LX on my secretaries WinNT desktop. I used the default values on my > W2k desktop yesterday and it worked right away - full screen of course. I share your experience in full screen mode. So the question what needs to be done to make it work in window mode is still valid. Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 18:05:13 +0100 Reply-To: Feher Tamas Sender: HPLX Mailing List From: Feher Tamas Subject: Re: Ann. LxPic 7.0 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit Hello all, >After one year of development I finally finished LxPic V7.0 Finally finished? Stefan is optimistic... New versions bring new features, which make people ask for even newer features, which would let them use those new features even more efficiently; and so the whole process starts over and over again. >High (64K) and True color (16.7M) screen modes To get these under Windows NT4/2000, you have to Alt+Enter your DOS box to full screen before run and start lxpic.com with /11 or similar cmd-line switch (e.g. explicitly specify a VESA screen mode) İBTW, under Win95/98/Me, you will probably have no problems at all, my Win98 tests showed perfect stability and nominal operation.¨ >16 bit dither for true color JPEG in 64K modes Indeed it works. However, you can still see the difference between true 16million colors and highcolor if you look closely, so implementing the 24/32bit mode was not a wasted effort in any way. - {#} toggles between best and startup screen mode > /# starts LxPic in the best available screen mode If you know the desired /number switch by heart, I'd say use that instead. If you get "frequency over range" warning from the monitor when using /#, quickly press Esc or Ctrl+C. This is because you may have a high-end VGA card, whose VESA bios obviously does not know whether you CRT is an older less capable device and uses card's strongest setting for output. > /* displays all available screen modes Under Win NT4/2000 run it twice in succession to see true results. > TAB shells into the directory of the actual image Does not (yet) work on WinNT4/2000. >I'd like to thank Tamas Feher for pushing me again and again >and for beta testing. I hope he doesn't mind, that only a >fraction of his suggestions made it into new version, but >I didn't want to develop another year ;-) Generally agree, except for the below discussion and the omission of a few usability enhancements, like off-border scrolling with cursor keys for easier and faster zoom-in navigation. >NOTE: LxPic still does not support progressive JPEG and >interlaced GIFs. Both formats are false moves IMHO >from a technical point of view, because these formats >push the memory and processor demands higher and higher. >... >Please try to the "right" way by avoiding progressive JPEG >and interlaced GIF whenever you can. These formats are useful and valid for the web, where the bottleneck is generally the transfer bandwith, not CPU power. With progressive, you can preview on the fly and decide whether you like this Ferrari image (or blonde Britney for that matter...). If yes, you wait for a full load, if not, just click away for a Porsche (or J-Lo). OK, web browsing on the 200LX is a silly idea nowadays, even if you have DS. But those, who use LxPic on desktop, are supposed to own a giant set of progressive / interlaced pics in their "windows\profiles\_user_\temporary internet files" folder, sometimes worth to browse. Am I saying Stefan should implement this support into LxPic? No! But I would welcome a workaround: support for an OPTIONAL config file for LxPic, which lists unsupported or lightly supported formats and the action to take, e.g.: *.fileext, subformat, call *,jpg, 422, C:\viewers\GNU\djpeg16.exe *.gif, iLZW, C:\nc40\bitmap.exe *.tiff,, C:\viewers\GNU\tcnv+dsp.bat *.pcx, "C:\viewers\GNU\lxpic.com /1 /w" *.txt,, C:\nc40\wpview.exe *.wav,, C:\sound\lxvox.com *.html,, C:\browsers\wwwlx3\hv.exe In my layman's option, LxPic's new shell-to-DOS functionalty seems to offer a solution for the above, because that gives access to a shell with (dosmem-lxpic) amount of memory, can be as high as 512kB or more. Enough to call and run external programs which then exit and give control back to LxPic. The problem with implementing this approach is that, now you have made LxPic into a Graphical Operating System Shell, eg. a direct competitor to Windows 9x. I wonder, if Stefan wants to undertake the task of releasing Windows or the MacOS? However, we should note William H. Gates III being one of the world's richest men, prospects cannot be that bad... Thanks for your attention, Sincerely: Tamas Feher. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 18:26:21 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Some info needed... MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Hi, I just subscribed to this list, and I'm glad there's still developments in progress for the HP200LX. I own one since several years, and I neglected it since I bought my Palm IIIxe (great machine, for day to day work). However, I'd like to reuse my HP for some tasks: developing (with my old Turbo C compiler), reading/writing mails/news, web browsing with my GSM, etc (the screen and input are much better than what you can find on any Palm-like device). My questions are: - is there a FAQ of this list, and where is it? - what are the best information sources (FAQ, technical info, product reviews, ...) for the HP200LX? Preferably on the Web... If there's a useful source of information as described by the upper 2 questions, then it may not be necessary to answer to the following: - does the internal memory upgrade reduce the battery life? - how does a compactflash or smart media compare in terms of speed for day to day use? how about internal memory, is it faster? - what are the compactflash card brands that draw the less current (I've got a 32M compact flash (no brand) in my HP200LX, and everytime I put it on, I've got a low card battery condition; I tested a friend's Kodak CF card, and there was no message) - is it possible to use a smartmedia, SD, MMC, or Memory Stick with the HP200? How does these compare in terms of speed and current consumption with the other "classic" solutions (pure PCMCIA, or compactflash) - are there any other things to take care of when choosing the right memory upgrade (wether internal or external)? - is there any successful experience of using another OS (ELKS Linux, Minix, ...) on the HP200LX? Thanks for having read up to this point, thanks for those who'll send me useful replies, and sorry for those I may have bothered by sending a newbie-like message... ;) -- Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- Keyboard not connected, press to continue. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 18:04:04 -0000 Reply-To: Chris Randle Sender: HPLX Mailing List From: Chris Randle Subject: Re: Commodore 64 & HP48 emulators In-Reply-To: <20020203075239.31454.qmail@mail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@UConnVM.UConn.Edu¨ On=20 > Behalf Of Dario Draiman > Sent: 03 February 2002 07:53 > I've read tht EMU48 became freeware and open source (only the=20 > DOS and Win98 versions, not the WINCE). Slight correction. I'm using Emu48CE and it's freeware too, distributed under the GNU General Public License. All the ROM images have now been release by HP and are included in the download. It's not a calculator but it's a nice freebie! --=20 Chris Randle ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 19:15:19 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Some info needed... MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Erwann welcome to the list and congratulations to your decision to re-use the 200LX! On Sun, 3 Feb 2002 18:26:21 +0100, Erwann ABALEA wrote: > However, I'd like to reuse my HP for some tasks: developing (with my old > Turbo C compiler), reading/writing mails/news, web browsing with my GSM, > etc (the screen and input are much better than what you can find on any > Palm-like device). > > My questions are: > - is there a FAQ of this list, and where is it? not generally of this list, but there is a 20LX FAQ on http://www.hplx.net > - what are the best information sources (FAQ, technical info, product > reviews, ...) for the HP200LX? Preferably on the Web... http://www.hplx.net http://www.palmtop.net (there is also a huge software archive called SUPER) http://peichl.hplx.net for a basic equipment of useful utilities for your palmtop http://www.palmtoppaper.com (all palmtop paper issues online with many, many tips and tricks) http://www.daniel-hertrich.de ;-) (esp. regarding Internet access and GSM) > - does the internal memory upgrade reduce the battery life? A little. Some say by 10%, sone say by 50%, especially in combination with a speed upgrade. > - how does a compactflash or smart media compare in terms of speed for > day to day use? how about internal memory, is it faster? Internal is faster, but much more expensive. You pay around 250 US$ for a 32MB internal upgrade, for a 32MB Compact Flash card + CF-PCMCIA adapter you only have to pay maybe 20-30 US$. But this will occupy your PCMCIA slot, which you may want to use with Ethernet / Modem cards. > - what are the compactflash card brands that draw the less current (I've > got a 32M compact flash (no brand) in my HP200LX, and everytime I put > it on, I've got a low card battery condition; I tested a friend's Kodak > CF card, and there was no message) Buy another card. A card which draws too much power could accidentally shut down your LX into backup mode or suck the batteries empty and you may loose data. Sandisk are the bet cards for the palmtop. Not the fastest, but the least power-hungry cards. And very reliable. > - is it possible to use a smartmedia, SD, MMC, or Memory Stick with the > HP200? How does these compare in terms of speed and current consumption > with the other "classic" solutions (pure PCMCIA, or compactflash) Don't know for sure, but in general, if you have a PCMCIA adapter for any of these cards, they could work... > - are there any other things to take care of when choosing the right > memory upgrade (wether internal or external)? With an internal memory upgrade, you can use EMM (extended DOS memory in emulation). YOu can't do this with a PCMCIA card. > - is there any successful experience of using another OS (ELKS Linux, > Minix, ...) on the HP200LX? There is MINIX for the LX, but it is only a nice-to-see. No real use for it. No software available and many palmtop-specific features are not supported. But have a look if you want. Minix is also on www.palmtop.net. Another OS is not possible at all, since the palmtop boots DOS from ROM. > Thanks for having read up to this point, thanks for those who'll send me > useful replies, and sorry for those I may have bothered by sending a > newbie-like message... ;) Every newbie-like message is a good sign for the ever shrinking palmtop community. :-) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 19:34:58 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: Some info needed... In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable Le Sun, 3 Feb 2002 18:26:21 +0100 Erwann ABALEA a =E9crit: > I just subscribed to this list,=20 Glad to see you here, Erwan=2E=2E > and I'm glad there's still developments in > progress for the HP200LX=2E=20 Yeah, and one of our best contributors, Philippe Lheureux, is working to adapt his CDP program for the HP200 !! No, just kidding =20 (sorry, friends, private joke=2E=2E=2E ;-) ) > My questions are: > - is there a FAQ of this list, and where is it? http://www=2Ehplx=2Enet/faq=2Efaq=2Ehtml > - what are the best information sources (FAQ, technical info, product > reviews, =2E=2E=2E) for the HP200LX? Preferably on the Web=2E=2E=2E http://www=2Epalmtop=2Enet=2E > - does the internal memory upgrade reduce the battery life? There is currently a thread about that on the list, can somebody can sumarize ? > - how does a compactflash or smart media compare in terms of speed for > day to day use? how about internal memory, is it faster? It is a bit slower, but I don't think you will be troubled with that=2E > - what are the compactflash card brands that draw the less current (I've > got a 32M compact flash (no brand) in my HP200LX, and everytime I put > it on, I've got a low card battery condition; I tested a friend's Kodak > CF card, and there was no message) If you want to be sure to buy a low-current CF card, I think to say that you must buy a Sandisk=2E > - is it possible to use a smartmedia, SD, MMC, or Memory Stick with the > HP200?=20 Not sure, but I think to remember that somebody on the list uses a PCMCIA-smartmedia adapter=2E=2E=2E > - are there any other things to take care of when choosing the right > memory upgrade (wether internal or external)? > - is there any successful experience of using another OS (ELKS Linux, > Minix, =2E=2E=2E) on the HP200LX? Someone of the list made a Minix package for the HP200=2E=2E=2E=20 I don't know if ELKS works on the palmtop=2E Does it runs on a 80186 ? Jacques=2E ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 19:29:05 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Re: Sandisk recognition over 220MB - was: Looking for software - Word 2.0 and Sandisk driver MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Barry wrote> > I just got a 256 meg Sandisk compact flash card from Ebay and > while I was waiting for it to get here I also intended to ask > for this driver since there's a lot of talk about it here. But Indeed, Barry, mine failed to work until I Fdisk100'd it on the LX, then it worked fine. Seemed it was formatted on a W98 machine, and that seems unreadable on the LX I was confused by the constant info on this list that Sandisk's PCMCIA's are only recognized up to 220MB. So, please, Listmembers with _real_ knowledge on this: What _is_ the _real_ maximum a 200LX recognizes without driver? It's NOT 220MB, it certainly is _some_ 256MB, but what about slightly higher, if any... So: 220MB's work standard on an LX, 256's need and fdisk100 _on the LX_ to be recognized, and are then read/write anywhere ( tested it extensively...). ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 14:30:31 -0500 Reply-To: Ed Sender: HPLX Mailing List From: Ed Subject: Screen acting up MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit My screen had recently started to act up. Sometimes when I turn it on, the screen is sort of faded with some parts lighter and some parts darker than other parts. Turning it off and on again seems to cure the problem--temporarily. This only has happened occasionally in the last few days. Is this indicative of some new problem starting? Is there some easy fix for this? (ie a fix not requiring a screwdriver as anything requiring taking the machine apart would be beyond my capabilities)--or does this mean a visit to the Thaddeus hospital is on the horizon. Thanks for any help/guidance. Ed Piotrowski ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 20:58:58 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Screen acting up MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Ed On Sun, 3 Feb 2002 14:30:31 -0500, Ed wrote: > My screen had recently started to act up. Sometimes when I turn it on, the > screen is sort of faded with some parts lighter and some parts darker than > other parts. Turning it off and on again seems to cure the > problem--temporarily. This only has happened occasionally in the last few > days. Does pressing on the edge left of the screen make the problem disappear or get worse? Take a look as http://www.danniel-hertrich.de/repair and scroll down to the screen section. There you will find a description with pictures about where to press etc. This is only a test to get closer to the source of the problem. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 15:48:18 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: Re: Commodore 64 & HP48 emulators Comments: To: Chris Randle MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit What is the HP48 ? Also, does the commodore emulator work on the HP200LX? If so, please email links. Thanks in adance ! ----- Original Message ----- From: "Chris Randle" To: Sent: Sunday, February 03, 2002 1:04 PM Subject: Re: Commodore 64 & HP48 emulators > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@UConnVM.UConn.Edu¨ On > Behalf Of Dario Draiman > Sent: 03 February 2002 07:53 > I've read tht EMU48 became freeware and open source (only the > DOS and Win98 versions, not the WINCE). Slight correction. I'm using Emu48CE and it's freeware too, distributed under the GNU General Public License. All the ROM images have now been release by HP and are included in the download. It's not a calculator but it's a nice freebie! -- Chris Randle ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 22:29:32 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: Commodore 64 & HP48 emulators In-Reply-To: <002401c1acf4$1cfe9a90$88149718@ubr.charterne.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable On Sun, 3 Feb 2002, Tralornik wrote: > What is the HP48 ? The HP48 is the best calculator... just after the HP49... ;) It could be cool to have an HP48/49 emulator working on the HP200. If I remember correctly, there's already such a beast running under pure DOS, but it's an old version, and it's unable to run the HP49 ROM. > Also, does the commodore emulator work on the HP200LX? I bet so. --=20 Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- En effet, les FAQ sont des "conseils d'utilisation" et non des r=E8gles =E0 respecter. -+-BC in Si tu veux du CU, retourne =E0 la FAQ-+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 22:41:38 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: Some info needed... In-Reply-To: <20020203191010.6540.JBELIN@altern.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable On Sun, 3 Feb 2002, Jacques Belin wrote: > Le Sun, 3 Feb 2002 18:26:21 +0100 > Erwann ABALEA a =E9crit: > > > I just subscribed to this list, > > Glad to see you here, Erwan.. So am I ;) > > and I'm glad there's still developments in > > progress for the HP200LX. > > Yeah, and one of our best contributors, Philippe Lheureux, is working t= o > adapt his CDP program for the HP200 !! Argl... (unsubscribe, fast!) :> I don't think I'll go on writing this CDP in C language. I was only interested in trying to break it, but it's no more interesting now... > http://www.hplx.net/faq.faq.html > http://www.palmtop.net. Thanks for the links. I already knew them, but didn't know their 'rating' among the HP200 community. I'll look more carefully what they offer. > > - does the internal memory upgrade reduce the battery life? > > There is currently a thread about that on the list, can somebody can > sumarize ? That's not necessary, I'll look through the archives. > > - how does a compactflash or smart media compare in terms of speed f= or > > day to day use? how about internal memory, is it faster? > > It is a bit slower, but I don't think you will be troubled with that. And what about the issues on the number of possible writings on a flash memory? Is this really important? > If you want to be sure to buy a low-current CF card, I think to say tha= t > you must buy a Sandisk. That's also what I thought, but I wanted a confirmation of this fact before buying such a card. It's not always possible to 'try before you buy'... > Not sure, but I think to remember that somebody on the list uses a > PCMCIA-smartmedia adapter... I'll look for this in the archives, thanks. > > - is there any successful experience of using another OS (ELKS Linux= , > > Minix, ...) on the HP200LX? > > Someone of the list made a Minix package for the HP200... > I don't know if ELKS works on the palmtop. Does it runs on a 80186 ? I followed the ELKS development several years ago (back in '96), and I'm sure it runs on a 80186. In fact, it's designed to run on a 8086. --=20 Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- > http://www.aixcomputers.com Jamais rien lu de plus con except=E9 une notice de magn=E9toscope. -+- JdC in GNU : Quatres t=EAtes hi-fi st=E9r=E9o et toujours aussi con -= +- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 16:51:50 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: Re: Commodore 64 & HP48 emulators Comments: To: Erwann ABALEA MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Looks like the commodore emulator requires a Pentium or Better processor: http://www.computerbrains.com/ccs64.html (If anyone knows of an Commodore 64 emulator that will run on a 8086/80186, please post a link !) ----- Original Message ----- From: "Erwann ABALEA" To: Sent: Sunday, February 03, 2002 4:29 PM Subject: Re: Commodore 64 & HP48 emulators On Sun, 3 Feb 2002, Tralornik wrote: > What is the HP48 ? The HP48 is the best calculator... just after the HP49... ;) It could be cool to have an HP48/49 emulator working on the HP200. If I remember correctly, there's already such a beast running under pure DOS, but it's an old version, and it's unable to run the HP49 ROM. > Also, does the commodore emulator work on the HP200LX? I bet so. -- Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- En effet, les FAQ sont des "conseils d'utilisation" et non des rhgles ` respecter. -+-BC in Si tu veux du CU, retourne ` la FAQ-+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 17:07:26 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: Re: Some info needed... Comments: To: Erwann ABALEA MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit You may want to go to Borlands community area and get the old Turbo C++ 1.01 or Turbo C Ver 3.02 compilers (I beleieve the C++ compiler is actually newer even thought the version number is lower (it does C as well)..plus it is easier to install...you don't need to convert to floppies first)...they are freely downloadable now....They also have PASCAL....(perhaps these are newer versions than what you have) http://community.borland.com/museum/ If you are going to program on the HP in 'C' then make sure to get the PAL library of excellent 'C' routines for palmtop programs (makes them look like built-in programs, with menus and whole ton of extra stuff....a real time saver for a programmer): http://ourworld.compuserve.com/homepages/gilles/ (And click on PAL link) or use this direct link: http://ourworld.compuserve.com/homepages/gilles/pal/PAL.htm (I recommend the first link as Gilles has some other goodies, like VR and FCL, for the palmtop). As far a CF cards, I would (again) recommend Sandisk(both card and adaptor)...I imagine they eventually wear out, but I don't think the number of writes should ever concern you...CF is a pretty solid media. The Delkin CF adaptors and Kodak CF adaptors have also worked for me. The last I heard is that the doublespeed and 32MB memory upgrade can knock off at least 50% battery life....perhaps more with high memory upgrade. People seem to get around this by using lithium batteries. (I am going from memory, but I think this is correct). You also might want to check out http://www.palmtoppaper.com/ptphtml/index.htm which is an online archive of all the old palmtop paper magazines.....a VERY useful archive. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 01:14:35 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: Ann. LxPic 7.0 Comments: To: Feher Tamas MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Feher Tamas wrote: > Finally finished? Stefan is optimistic... New versions bring new > features, which make people ask for even newer features... I hope you are wrong ;-) > > /# starts LxPic in the best available screen mode > > If you know the desired /number switch by heart, I'd say use that > instead. ... and make a batch file P.BAT with only one line: LXPIC %1 /11 if 11 is your wanted screen mode. From now on you only call P instead of LXPIC, which is less to type and completely compatible with all other command line switches of LXPIC. > > TAB shells into the directory of the actual image > > Does not (yet) work on WinNT4/2000. Oh no! > >NOTE: LxPic still does not support progressive JPEG and > > These formats are useful and valid for the web, where the bottleneck is > generally the transfer bandwith, not CPU power. With progressive, you > can preview on the fly and decide whether you like this Ferrari image > (or blonde Britney for that matter...) And why had nobody the idea to design a progressive text format, where you first see every 16.char, then every 8., 4., 2. and finally filling the gaps? I could argue as well, that with every 4.char displayed, you could already decide, if the text is useful for you or not. > I wonder, if Stefan wants to undertake the task of > releasing Windows or the MacOS? not in this life... Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 02:52:02 +0100 Reply-To: Laust Brock-Nannestad Sender: HPLX Mailing List From: Laust Brock-Nannestad Subject: Re: Commodore 64 & HP48 emulators In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Sun, 3 Feb 2002, Erwann ABALEA wrote: > On Sun, 3 Feb 2002, Tralornik wrote: > > > What is the HP48 ? > > The HP48 is the best calculator... just after the HP49... ;) I never liked the HP49 (especially not the keyboard. The keys pale in comparison to the good old plastic keys used in (on?) many HP calculators or even the 95/100/200LX). Give me an HP48GX any day ;-) > It could be cool to have an HP48/49 emulator working on the HP200. If I > remember correctly, there's already such a beast running under pure DOS, > but it's an old version, and it's unable to run the HP49 ROM. I've never seen an HP48 emulator for DOS that wasn't a 32-bit DOS excecutable (compiled using DJGPP), which pretty much rules out the LX. > > Also, does the commodore emulator work on the HP200LX? > > I bet so. I doubt it. I *think* I saw an early beta of a C64 emu once that ran on a 286, it required either EGA or VGA. Basically, the LX is too slow to emulate these two machines at any reasonable speed... Regards, Laust ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 21:13:53 -0800 Reply-To: j_vanderstel@JUNO.COM Sender: HPLX Mailing List From: John J Vander Stel Subject: Windows from the Keyboard MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi All, Today I was surprised to find a book in a small town library entitled, "Windows from the Keyboard". The book documents quite a few of the keyboard shortcuts for Windows 3.1 and the Windows versions of Word Perfect, Microsoft Word, Lotus Ami Pro, Microsoft Excel, Borland Quattro Pro and Lotus 1-2-3. I checked it out because it should be invaluable for a project I'm working on right now that might involve my HP200LX and Windows 3.0. (I surmise that the keyboard shortcuts for Win3.0 would be virtually identical to those of Win3.1) Unfortunately, the library won't be ready to purge that book from their shelves anytime soon, so I'll have to be satisfied with having it near by for reference for only a week or two. If anyone has any questions about a keyboard shortcut for any one of these applications, I might be able to help for the next week or so. :-) Cheers! John Vander Stel Grand Rapids, Michigan ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 03:24:10 +0000 Reply-To: xy mox Sender: HPLX Mailing List From: xy mox Subject: Re: Around The World In 80 Minutes Mime-Version: 1.0 Content-Type: text/plain; format=flowed hohoho... kung hei fat choi. sorry i'm late! thanks, roger! send me this messages. Billy Hong Kong LXer >Like Roger Shea, I live in Hong Kong. > >Since we have a population of only 6 million, our per capita >count is pretty high. I bet we can beat the Norwegians and >Kiwis if we can find one more. > >Ka Tai >** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 05:05:37 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: FLUFF: desires; was "Gender? and Around The World.." MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Kimberly wrote: Hmm.... in that case, maybe marital status would be important too... and Ed laughed: think VIRTUAL flirtin' is still safe and mostly harmless) That not withstanding, perhaps marital/family status, age, occupation would be also be nice to include. Of course, then we're running up against privacy concerns... ah, whatever . -insert end- what are we actually looking for when opening the HPLXKNDB to find someone? _ _ _ fulfillment of desires :) ... if you want the other sex, why not write to him/her? to accomodate details of member's lives it would take several MB of a pdb. _ _ _ there are around 1000 list members - only 1 in 10 has come forward with their "round the world" info, which reflects my personal d-base of list members - before the start of the norway/r-t-w thread i had 16 members listed of the 100 who participated so far, but i have 89 more who wrote to me but not to the list! some are 100% lurkers. so, just give names, e-mail addresses and what they have to offer (hardware, software, databases, lotus templates, expertise) - if the 'offer' includes a d-base on bars in NYC ... well then Ed can have his go :) Nathalie ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 05:06:35 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit i just wondered if it is possible to connect a CF card reader via serial cable to the serial port. would this make it "B"- drive ?!? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 06:52:18 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Helmuth E. Guenther wrote: > > So the question what needs to be done to make it work in window mode is > still valid. I am very happy the way Stefan improved PALRUN and have no issues running it full screen (g). HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 06:52:22 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: SUPER update MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Daniel Hertrich wrote: > > 2. New LXPIC version 7.0 I think the ZIP archive on SUPER and on Stefans homepage were created with a newer zipper software. I was unable to extract it on my palmtop with PKUNZIP or UNZIP. Had to use my desktop and PowerArchiver to extract the files. HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 07:20:03 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: SUPER update MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hello HP On Mon, 4 Feb 2002 06:52:22 +0100, HP Staber wrote: > I think the ZIP archive on SUPER and on Stefans homepage were created > with a newer zipper software. I was unable to extract it on my palmtop > with PKUNZIP or UNZIP. Had to use my desktop and PowerArchiver to > extract the files. Strange. You are not the only one reporting problems. I didn't have any problem unzipping it. It worked with my unzip programs on the palmtop and with Winzip 6 on my Omnibook: Info-ZIP Unzip 5.0p1 PKUNZIP 2.04g Winzip 6 Stefan? Do you know what's wrong here? GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 3 Feb 2002 23:22:53 +0000 Reply-To: Mark Crumpton Sender: HPLX Mailing List From: Mark Crumpton Organization: Arcade - The Definitive Acorn BBS Subject: Re: Around The World In 80 Minutes Sorry I'm late - been away for a few days and just catching up on list... Mark A. Crumpton nr. Birmingham, West Midlands, United Kingdom No exotic ancestry AFAIK... 'Discovered' the HP95LX in 1996, now using 200LX (not ugraded - yet!) -- ___ ___ ___ ___ ___ ___ | Free Internet E-mail and Usenet News | | / \/ \/ \/ \/ \/ \ | +44 20 8654 2212 +44 20 8655 4412/1811 | | A R C A D E | Croydon UK - Fidonet#2:254/27.0 | | The Definitive Acorn BBS | http://www.arcade-bbs.net off peak | ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 08:09:14 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Nathalie On Mon, 4 Feb 2002 05:06:35 +0100, Nathalie Bugeaud wrote: > i just wondered if it is possible to connect a CF card reader via serial > cable to the serial port. would this make it "B"- drive ?!? Certainly not. B: is occupied by the PCMCIA card driver (Although it seems to be nevery used). If you attach any drive to any port and for which you need a special driver, it would append to the list of usable drive letters. So, a non*upgraded unit with the assign E: A: command running would probably asign F: to any additional drive. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 08:14:01 +0100 Reply-To: Pavel Zampach Sender: HPLX Mailing List From: Pavel Zampach Organization: =?ISO-8859-2?Q?Nemocnice_=C8=2E_Bud=ECjovice?= Subject: LXPic and PXMap Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-2 Content-Transfer-Encoding: quoted-printable Hi, don't use LXPic 7.0 with LXMap (2.2)! Restart with wiping date, time and some next data will be follow :-( --=20 Pavel zampach@nemcb.cz ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 07:40:38 -0000 Reply-To: condor@slb.com Sender: HPLX Mailing List From: "Peter L.G. (Condor) Mockridge" Subject: Re: Around The World In 80 Minutes? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Peter (Condor) Mockridge, West Sussex (on the south coast), England 2 * doublespeed HP200LX (both original 4MB HP units), both aprox 5/6 years old and owned from new (the older unit was bought in the US, aprox. 10 days after the official product launch, the other in Europe). One has a 20MB flash card, the other a 64MB card, have pace battery powered modems for both and use a registered copy of goin' postal for email on the move ;-) Kind regards, Peter ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 10:02:20 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: Around The World In 80 Minutes? In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Okay, As told to Al Kind: Erwann Abalea, Chatou (west suburb of Paris, France). Only 1 classic HP200LX 2MB, I'm thinking of doublespeed and 8MB upgrade it. It has a 32MB CF that draws too much current. I haven't use my HP200 for the last year. I also have the very first GPR smart card reader from Gemplus, a PCMCIA unit that was designed for the HP95/100/200 series (I can use it, but I don't really have the need to). I also own some HP calculators: HP48SX, 48GX, 49G, 42S. BTW, if you happe= n to have old models such as HP15c and HP16c, and would like to sell them, please contact me, I might be interested... ;) Regards. --=20 Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- BJ> Faudrait pas me prendre pour un con. Merci JB> Relis bien cette partie du thread, on n'officialise rien d'ill=E9gal. -+- In : Guide du Neuneu d'Usenet - Bien officialiser sa connerie -+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 10:16:52 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: LXPic and PXMap MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, > don't use LXPic 7.0 with LXMap (2.2)! > > Restart with wiping date, time and some next data will be follow :-( To avoid such problems, I just updated LXMAP to version 3.0 on SUPER and added a comment to LXPIC not to use it with an older LXMAP version. Thanks daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 12:25:08 +0100 Reply-To: Tomas Moberg Sender: HPLX Mailing List From: Tomas Moberg Subject: Re: Commodore 64 & HP48 emulators Comments: To: Dario Draiman MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 Content-transfer-encoding: 7BIT There is one that theoreticaly should work on a hp200lx. But it did not. So the answer is - No You can not run an C64 emulator on a hp200lx. Dario Draiman wrote: > Hi all! > Does anyone knows about a C64 emulator that can work on the LX? > Also it would be nice to have a HP48/49 emulator in the LX. I've read tht EMU48 became freeware and open source (only the DOS and Win98 versions, not the WINCE). Perhaps someone with programming skills could patch the source to make it work on the LX. > What do you think? > > Dario > > -- > > _______________________________________________ > Sign-up for your own FREE Personalized E-mail at Mail.com > http://www.mail.com/?sr=signup > > Win a ski trip! > http://www.nowcode.com/register.asp?affiliate=1net2phone3a > /tomas moberg Uppsala ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 12:42:18 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: Some info needed... In-Reply-To: <004501c1acff$2ab77a70$88149718@ubr.charterne.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Le Sun, 3 Feb 2002 17:07:26 -0500 Tralornik a =E9crit: > adaptor)=2E=2E=2EI imagine they eventually wear out, but I don't think the= number > of writes should ever concern you=2E=2E=2E The wear-out problem was mentioned by Sundisk when they released their first cards=2E IIRC, they said it would arrive near something like 100 000 writes on each "sector", and provided an utility to test an rearrange sectors=2E=2E=2E Some people ran this utility each 6 months, as precaution=2E Some others don't=2E=2E=2E=2E And I have never heard about a data loss which have been suspected to be caused by a wear-out=2E Anyway, since the first Sundisk cards, the Flash technology has been improved, or even totaly changed (with the NAND based cards)=2E=2E=2E So, I don't think we have to worry about that now=2E=2E=2E Jacques=2E ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 12:45:37 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: Commodore 64 & HP48 emulators In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Le Sun, 3 Feb 2002 22:29:32 +0100 Erwann ABALEA a =E9crit: > The HP48 is the best calculator=2E=2E=2E just after the HP49=2E=2E=2E ;) Sorry, the best calculator is still the HP-41 ! ;-) Jacques=2E ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 14:53:22 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Helmuth E. Guenther wrote: > > > It is running fine here too, but only in in full screen mode. > > So the question what needs to be done to make it work in window mode is > still valid. PALRUN does not know, if it is running on a full screen or in a DOS box window. So every difference in the behaviour must be related to your DOS box window preference setup. But this setup has always been a mystery for me. So many places to change sometimes identical entries. Some survive, some don't, some are changed by the OS at it's own free will... Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 15:29:05 +0100 Reply-To: Dzon Sender: HPLX Mailing List From: Dzon Subject: X-Finder .ZIP browsing MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Hello list! I've found this cool thing İX-Finder¨ and I'd like to tune it for myself. But I've found this, important for me, problem: When I tap Enter on .zip archive, I can dive in, but just one level. When there is directory structure on zip and I tap enter on directory, I cannot go deeper and it just tries to open the directory in viewer, what makes no sense. Can you please tell me where to set it up to behave correctly? ******* I guess I've found a bug in App Manager: When I try to append another application type .exm and the path is too long İa:\applics\iconedit\iconedit.exm is enough¨, I cannot run the program: it behaves the same way as when I installed more than 8 İ?¨ apps before: cannot run and asterisk in List. Rename of a:\applics to a:\apps solves my problem. I hope this could help anyone. -- -Dzon dzon@softhome.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 10:00:44 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Some info needed... MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Erwann ABALEA wrote: > And what about the issues on the number of possible > writings on a flash memory? Is this really important? I have an old Epson (made by Sandisk when it used to be Sundisk) 10 meg PCMCIA flash card that is rated far lower in terms of number of possible writes than today's cards. I think it was in the hundreds of thousand writes back then. Now it's in the millions. I bought this card for $599 when the 20 meg cards became available and the 10 meg price dropped from around $800. Hard to believe now. :) It comes with a program for wear leveling it. The program tests each sector and if any sector writes slowly (thats how they wear out) then it swaps it for another sector that still writes fast, distributing the wear more evenly. I've been running this program every 6 months to 1 year for (just a guess) 7 or 8 years and each time it says "This card doesn't need wear leveling". The last time was a few months ago. I still use this card in the 200lx I keep next to the computer for passwords and URLs and such and it's used quite a bit. Eventually it'll do some wear leveling but I don't know how long before it'll need it. Today's cards should last many times longer. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 17:15:32 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Picture gallery / Minidisc labeling system MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, have a look at Stephen McAinsh's picture gallery! That's the way working (with the LX) is a real pleasure. http://www.colquhoun.com/stephen/gallery Also: Do you know the LX Minidic labeling system, developed by Helmut Lucke? Just came across his page on the Internet. Very interesting. Especially the "IR router" he built is extremely innovative! :-) http://www.minidisc.org/mdlbl/mdlbl.htm GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 17:15:33 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Around The World In 80 Minutes? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Peter nice to hear from you, but what happened to your FROM header? GTX daniel On Mon, 4 Feb 2002 07:40:38 -0000, wrote: > Date: Mon, 4 Feb 2002 07:40:38 -0000 > From: > Subject: Re: Around The World In 80 Minutes? > To: HPLX-L@UConnVM.UConn.Edu > Peter (Condor) Mockridge, > West Sussex (on the south coast), England > -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 10:10:56 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Some info needed... MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Tralornik wrote: > You may want to go to Borlands community area > and get the old Turbo C++ 1.01 or Turbo C Ver 3.02 > compilers (I beleieve the C++ compiler is actually > newer even thought the version number is lower > (it does C as well) Turbo C++ early versions are 1.01 and 2. Version 3.x won't run on the LX. Turbo C (without the ++) version 2.01 will run on the LX and compiles much faster. TC++ 1.01 is slow but usable. TC++ 2 is too slow on a single speed machine, in my opinion. TC 2.01 is older than TC++ 1, but not much. None of the debuggers, including the IDE debuggers work very well on the 200lx. They crash and lock up very quickly. I use Microsoft's Symdeb, the predecessor to Codeview that came with Masm 4. It works fine with TC 2 and supports switching to CGA graphics mode. Mapsym, which comes with it, converts the map file produced by Tlink to a symbol file for Symdeb, allowing symbolic and source level debugging even of .com files. It's not nearly as nice as TD or Codeview but it works ok and they don't. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 10:21:35 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Commodore 64 & HP48 emulators MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Laust Brock-Nannestad wrote: > I've never seen an HP48 emulator for DOS that > wasn't a 32-bit DOS excecutable (compiled using > DJGPP), which pretty much rules out the LX. I downloaded an HP48s work-alike calculator written for the 95lx from CSHAND library in the early days of the 95lx. It wasn't an emulator. It wouldn't run ML or SYSRPL programs for the 48. But it would run RPL programs and acted like a 48 in every way I could see. The problem was that it was a pretty expensive shareware package and the downloadable version wouldn't save it's state so you started fresh every time. They said the full product always opened in the state it was last in. Also I remember thinking that the keyboard layout was pretty bad. I can't remember if it was customizable in the full product or not. I don't remember the price now but it was a bunch so I didn't get one. I already had a 48sx anyway. Now I wish I had bought it. If anyone has access to CSHAND and they still have the old library you might check and see if it's still there. I can't remember it's name. I probably have an old copy somewhere but I don't know which of my several hundred 5.25 disks it would be on and not remembering it's name I might not know it if I saw it. I'll look as I can though. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 18:01:29 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: Some info needed... In-Reply-To: <002901c1ad95$1ade6780$c1fe36d8@oemcomputer> MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Le Mon, 4 Feb 2002 10:00:44 -0600 Barry a =E9crit: > I bought this card for $599 when the 20 meg cards became > available and the 10 meg price dropped from around $800. Hard > to believe now. :) When Sundisk released their first cards, fall 1992, the 10Mb cards were sold $1000 by EduCALC... One of my friends is possibly the first Frenchie to buy one of them.... When he received it, we manipulated it as it was pure gold.... ;-) Jacques. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 09:30:00 -0800 Reply-To: Tom Ziolkowski Sender: HPLX Mailing List From: Tom Ziolkowski Subject: Re: Sandisk recognition over 220MB MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii "Michel Bel" wrote on Sun, 3 Feb 2002 19:29:05 +0100> > Barry wrote> > >> I just got a 256 meg Sandisk compact flash card from Ebay and >> while I was waiting for it to get here I also intended to ask >> for this driver since there's a lot of talk about it here. But > > Indeed, Barry, mine failed to work until I Fdisk100'd it on the LX, then it > worked fine. Seemed it was formatted on a W98 machine, and that seems > unreadable on the LX > > I was confused by the constant info on this list that Sandisk's PCMCIA's are > only recognized up to 220MB. > > So, please, Listmembers with _real_ knowledge on this: What _is_ the _real_ > maximum a 200LX recognizes without driver? It's NOT 220MB, it certainly is > _some_ 256MB, but what about slightly higher, if any... > > So: 220MB's work standard on an LX, 256's need and fdisk100 _on the LX_ to > be recognized, and are then read/write anywhere ( tested it extensively...). Sorry to butt in here.. I recently got the Sandisk 220MB PCMCIA card myself (from Silicon Salvage, mentioned a while back here on the list) and I found it necessary to use both fdisk100 and a format command on it before my 2M 200LX could read/write it. (Filer reported an "invalid media" error when I tried to format it before using fdisk100, and a simple "Drive Not Ready" on attempts to open the drive.) I don't know if this was a fluke, because from what I've been reading here it should have worked "out of the box". Following that, I concede that the disk can then be read and written to "anywhere" - I've used it under MacOS 9.1 and Win98SE for file transfer purposes with no problem. One caveat with this though. The MacOS adds hidden files named "finder.dat" to every directory on the card for compatibility with its own filesystem. The presence of these files will prevent you from deleting directories back on the LX (simply because the directory in question isn't empty). This caused me some confusion for a while until I realised I just had to use attrib to unhide and then delete them. - Tom Ziolkowski Rahway, NJ, USA Happily playing "Legacy of the Ancients" on his HP200LX __________________________________________________ Do You Yahoo!? Great stuff seeking new owners in Yahoo! Auctions! http://auctions.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 19:16:39 +0100 Reply-To: =?iso-8859-1?q?richard=20parrent?= Sender: HPLX Mailing List From: =?iso-8859-1?q?richard=20parrent?= Subject: Around the world MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Richard Parrent French Lyon, center france 200lx, 2mb ===== MerciBye bye ` +RPparrent_richard@yahoo.fr ___________________________________________________________ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en frangais ! Yahoo! Mail : http://fr.mail.yahoo.fr ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 14:05:35 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: Sandisk recognition over 220MB Comments: To: Tom Ziolkowski In-Reply-To: <20020204173000.76570.qmail@web20504.mail.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit I think deltree work regardless of hidden,system files >presence of these files will prevent you from deleting > directories back on the > LX (simply because the directory in question isn't empty). > This caused me some > confusion for a while until I realised I just had to use > attrib to unhide and > then delete them. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 20:07:09 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Demo version of WWW/LX and PDU / SMS MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, Michael Polak also asked me what I could recommend as a convenient way to handle SMS on the 200LX. Of course I recommended PDU with Post/LX and WWW/LX, but since he develops an Internet package for the LX, he certainly does NOT want to buy WWW/LX ;-) So my idea was to use the demo version of WWW/LX, which is limited to what? 10kB or 16kB? Whatever, it should be enough for just SMS. So, has anyone experiences regarding the WWW/LX demo version in combination with PDU? If this transfer limit is really the only limitation in the demo, it should work, shouldn't it? Post/LX is not in any way limited in the demo, or is it? GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 20:07:07 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Fwd: Arachne / LX MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, Michael Polak has my Siemens data cable now and so he can begin to adapt Arachne for the LX. This is what he wrote to me: --- begin of forwarded message --- Date: Mon, 04 Feb 2002 18:11:43 +0100 From: Michael Polak To: daniel.hertrich@gmx.de Subject: about payment... İ...¨ - because I had chance to test the cable, I have decided to test it first, and either send it back to you if it won't work, or send money if it works. Cable works perfectly, to my great enthusiasm (see my previous e-mail) - you can announce HP-LX pacage of Arachne to HP-LX mailing list memebers. I want to write also VGA-screen demoversion, which will show image of futuristic cell-phone with HP-LX sized display, and Arachne runing in such 640x200 screen; so developers can use it as demonstration version. İ...¨ --- end of forwarded message --- -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 15:43:20 -0400 Reply-To: "Jose M. Valdes R. YV5LIX" Sender: HPLX Mailing List From: "Jose M. Valdes R. YV5LIX" Subject: TECH: CPACK problem. MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi list members. First of all I like to say that I'm new to the list and a HP-95LX user since 1991. I have a HP-95LX since November 1991 and I'm having a problem with CPACK, recently the HDD of my old computer that had CPACK failed and when I try to install CPACK in the newer computer I found that the original CPACK diskette for installing the application has gone bad also, and when I execute the INSTALL.EXE file I get the message "packed file is corrupt", so now I can't transfer files to/from the HP-95. Can some one give me some help as were may I fiend a copy of CPACK or if there is another software that I may use. Thanks in advance for any help that I may get. Best regards to all Jose M. Valdes R. This message was scanned for viruses before it was sent. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 17:18:02 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Fw: Re: Emu48 and HP200LX Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Hi. This is a fowarded msg of one of the developers of EMU48 (HP48 emulator). -----Original Message----- From: "Christoph Giesselink" Date: Mon, 4 Feb 2002 19:41:41 +0100 To: "Dario Draiman" Subject: Re: Emu48 and HP200LX Hallo, converting Emu48 to this machine isn't possible for two reasons. 1) the 7 Mhz is tooooo slow (an older Emu48 version needed at least a 80486 @ 66Mhz, current WinCE on a SH3 CPU need about 100Mhz) 2) Emu48 needs ~1.5MB (without port2 !) virtual memory to emulate a HP48GX (the HP200LX has less memory then the need one and more important, 16Bit DOS can only access 640KB!) Happy converting... Christoph -----Original Message----- From: "Christoph Giesselink" Date: Mon, 4 Feb 2002 21:32:31 +0100 To: "Dario Draiman" Subject: Re: Emu48 and HP200LX Hallo, > > 2) Emu48 needs ~1.5MB (without port2 !) virtual memory to emulate a HP48GX > > (the HP200LX has less memory then the need one and more important, 16Bit DOS > > can only access 640KB!) > > > > That's right, but there is also a Expanded memory manager called EMM200 so you could address more that the 640KB. Does this help? No, the EMM technique allows only to map a 64k page into the 1MB address area. 1st it's just a cruel for developers to work with EMM and 2nd, the EMM will additionally slow down emulation speed. > Anyway I don't have a lot of hope to make the emulator work in the LX. But in general you won't find anybody to make a software for such an old fashioned machine. The DOS software/sources, you mentioned before, are very old, they only include a rudimental emulation which you can't compare with the emulation quality of actual emulators (but there aren't many alternatives anyway). Christoph -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Win a ski trip! http://www.nowcode.com/register.asp?affiliate=1net2phone3a ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 00:27:28 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: Fw: Re: Emu48 and HP200LX In-Reply-To: <20020204221802.31295.qmail@mail.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Well... If it's not possible to emulate an HP48, it should at least be possible to simulate one... It should be possible to have a nearly infinite stack, to deal with reals, complex, matrices, vectors, lists, strings, RPL programs, ... and still possible to manipulate symbolic objects, all at a decent speed... On Mon, 4 Feb 2002, Dario Draiman wrote: > Hi. This is a fowarded msg of one of the developers of EMU48 (HP48 emulator). > > -----Original Message----- > From: "Christoph Giesselink" > Date: Mon, 4 Feb 2002 19:41:41 +0100 > To: "Dario Draiman" > Subject: Re: Emu48 and HP200LX > Hallo, > > converting Emu48 to this machine isn't possible for two reasons. > > 1) the 7 Mhz is tooooo slow (an older Emu48 version needed at least a 80486 > @ 66Mhz, current WinCE on a SH3 CPU need about 100Mhz) > > 2) Emu48 needs ~1.5MB (without port2 !) virtual memory to emulate a HP48GX > (the HP200LX has less memory then the need one and more important, 16Bit DOS > can only access 640KB!) > > Happy converting... > > Christoph > > -----Original Message----- > From: "Christoph Giesselink" > Date: Mon, 4 Feb 2002 21:32:31 +0100 > To: "Dario Draiman" > Subject: Re: Emu48 and HP200LX > Hallo, > > > > 2) Emu48 needs ~1.5MB (without port2 !) virtual memory to emulate a > HP48GX > > > (the HP200LX has less memory then the need one and more important, 16Bit > DOS > > > can only access 640KB!) > > > > > > > That's right, but there is also a Expanded memory manager called EMM200 so > you could address more that the 640KB. Does this help? > > No, the EMM technique allows only to map a 64k page into the 1MB address > area. 1st it's just a cruel for developers to work with EMM and 2nd, the EMM > will additionally slow down emulation speed. > > > Anyway I don't have a lot of hope to make the emulator work in the LX. > > But in general you won't find anybody to make a software for such an old > fashioned machine. The DOS software/sources, you mentioned before, are very > old, they only include a rudimental emulation which you can't compare with > the emulation quality of actual emulators (but there aren't many > alternatives anyway). > > Christoph > > > -- > > _______________________________________________ > Sign-up for your own FREE Personalized E-mail at Mail.com > http://www.mail.com/?sr=signup > > Win a ski trip! > http://www.nowcode.com/register.asp?affiliate=1net2phone3a > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > -- Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- MW >Tss... Un cybermaquereau. On aura tout vu ! JdC> Pourquoi pas ? Il doit bien exister des cybermorues. -+- in : Guide du Neuneu d'Usenet - Les joies du cybersexe -+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 16:48:56 -0700 Reply-To: Jeffrey Veiss Sender: HPLX Mailing List From: Jeffrey Veiss Subject: Problems with Sandisk 220MB card MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Hi All! I purchased a SanDisk 220MB Type 2 PCMCIA card and was wondering if anyone else has noticed a similar problem as I'm experiencing. I've run FDISK100 and formatted on the card on the HP but sometimes when I go to filer or DOS, it shows the card as empty. At that point, it will only show the contents of the card again after I soft reboot. In addition, it usually takes quite a few seconds to get into Filer when the card is inserted. Does anyone have similar experiences or thoughts about this? Thanks in advance! -Jeff ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 01:20:35 +0100 Reply-To: =?iso-8859-1?B?SfFpZ28=?= Sender: HPLX Mailing List From: =?iso-8859-1?B?SfFpZ28=?= Subject: Palm database->Hp 200lx MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi everybody, Is it possible to somehow view a Palm database in the Hp 200lx? Can these Palm databases be changed into something which is MS-DOS or Windows compatible. I ask this because there is a very nice Movie database for the palm: http://www.magma.ca/~sheppard/IMDb/Palm.html which would be very cool to carry on our 200lx. That way I will know what to choose when I go to rent a video. thanks, Inigo _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 00:37:00 +0000 Reply-To: tim_schweikert@yahoo.com Sender: HPLX Mailing List From: Tim Schweikert Subject: Fluff: Around the world in 80 days >Subject: Re: Around The World In 80 Minutes? Well, my previous message on the subject bounced, so I'll try again: Tim Schweikert Citizenship: US. ethnic heritage: German. (triple handicap: engineer, German, & ex-military) non-native languages: Russian & German. profession by training: EE. By avocation: Jack of all trades and master of none. current location: Minneapolis, MN past locations: US(various cities including Anchorage,Alaska), Japan, Germany(3 yrs). One avocation: Handheld afficiando since mid-life finishing college in the late '70s starting with the HP35/45/65. I've had every major handheld family available, sometime with several models in the family. More to the point of this mailing list, I've owned 4 HP200's of various capacities & started with the HP95. I also waited a _long_ time before trying out the WinCE/PocketPC/HandHeldPC family. Although the HP200LX platform is showing it's age, a few dedicated programmers are keeping it functional for the slightly geeky consumers who are willling to invest a bit of time. I'm currently exploring the HP720 - descendant of the HP200 which follows HP's pattern of purchasing the handheld OS from another company (Lotus developed the HP200 OS) rather than developing the OS themselves. The HP41/28/48/49 is an example of HP still developing the OS - and also another good example of the market desperately trying to keep excellence alive in spite of the HP's obvious willingness to drop the whole market and abandon both engineers and developers. ...jumping off the soapbox... Tim ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 02:30:21 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: FS: Several very good 2MB 200LX kits: 5 UK/US, 1 FR MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I have been given the opportunity to offer to the list: 5 packages English and one French consisting of: - 2MB 200LX in very good condition, cleaned and checked. No missing pixels, no hinge breaks, battery cover intact, etc. Complete.. - New and unused set of manuals ( Some still originally sealed, otherwise still new, unsealed) French only the big guide. - Connectivity kit: Cable, 3 connectors ( null modem, Printer and 25Pins connector) - New holster type leather slipcase. - One CD-R with 300MB of LX related Software and info. Cost: 150 Euro (net) plus shipping, ( EU/Europe about 20 Euro insured, rest of the world about 40 Euro). Conditions: Prepaid/Paypal or Bank Transfer/Giro. EU residents get priority (less hassle). Refund (without shipping costs) if not satisfied. The sixth who orders misses out on the null modem (Cross 9-9 pins ). Michel I will try to post pictures somewhere of one of these kits. Oh, yes, also available: 3 of the same as above except: horrible hinge breaks, good screen and keyboard. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 02:41:12 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Corr: FS Kits / Adapter also included MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit I have been given the opportunity to offer to the list: 5 packages English and one French consisting of: - 2MB 200LX in very good condition, cleaned and checked. No missing pixels, no hinge breaks, battery cover intact, etc. Complete.. - New and unused set of manuals ( Some still originally sealed, otherwise still new, unsealed) French only the big guide. - Connectivity kit: Cable, 3 connectors ( null modem, Printer and 25Pins connector) - 100/240 volt Original HP Adapter (WestEuro prongs) - New holster type leather slipcase. - One CD-R with 300MB of LX related Software and info. Cost: 150 Euro (net) plus shipping, ( EU/Europe about 20 Euro insured, rest of the world about 40 Euro). Conditions: Prepaid/Paypal or Bank Transfer/Giro. EU residents get priority (less hassle). Refund (without shipping costs) if not satisfied. The sixth who orders misses out on the null modem (Cross 9-9 pins ). Michel I will try to post pictures somewhere of one of these kits. Oh, yes, also available: 3 of the same as above except: horrible hinge breaks, good screen and keyboard. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 22:43:04 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Demo version of WWW/LX and PDU / SMS MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > Hi friends, > > Michael Polak also asked me what I could recommend as a convenient way > to handle SMS on the 200LX. > Of course I recommended PDU with Post/LX and WWW/LX, but since he > develops an Internet package for the LX, he certainly does NOT want to > buy WWW/LX ;-) He does not need to _buy_ WWW/LX Version 3! All he needs to do is send an email to info@dasoft.com and tell me who he is, what he is doing and I'll be honored to send him a complimentary license of WWW/LX Version 3! (We did similar things with other serious developers, even competitors, because it makes perfectly good sense and increases the options we all have on the Palmtop!) Please let him know and invite him to write to me for the license and perhaps forward this email to me. > So my idea was to use the demo version of WWW/LX, which is limited to > what? 10kB or 16kB? Whatever, it should be enough for just SMS. WWW.EXE is 16K including ALL traffic, handshaking, the works... Post.exe limited to one send one receive (also subject to the 16K). > Post/LX is not in any way limited in the demo, or is it? Yes, see above. Avi M. İD&A¨ http://www.dasoft.com _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 20:26:25 -0800 Reply-To: LLoo@WORLDNET.ATT.NET Sender: HPLX Mailing List From: Longden Loo Subject: Re: Problems with Sandisk 220MB card In-Reply-To: MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT > I purchased a SanDisk 220MB Type 2 PCMCIA card and was wondering if > anyone else has noticed a similar problem as I'm experiencing. > > I've run FDISK100 and formatted on the card on the HP but sometimes > when I go to filer or DOS, it shows the card as empty. At that point, > it will only show the contents of the card again after I soft reboot. I have one of these cards and haven't seen this behavior. Then again, I didn't run fdisk100 on the card, since it was partitioned and formatted already (apparently not the case with all of them). > In addition, it usually takes quite a few seconds to get into Filer > when the card is inserted. It usually takes 5-8 seconds to read my 220mb card's much larger file allocation table than I used to see, compared to 2-5 seconds with smaller cards. If you suspect a problem, I recall the seller (Silicon Salvage) offered a limited guarantee. You may want to call them about the problem .. maybe they can offer a replacement. - Longden ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 06:54:52 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit HP Staber wrote: > > Helmuth E. Guenther wrote: > > > > So the question what needs to be done to make it work in window mode is > > still valid. > > I am very happy the way Stefan improved PALRUN and have no issues > running it full screen (g). I had an issue today on my WinNT laptop : I started PIM/PE and tried to create a "only" view by hitting Ctrl-C and specifying the string pattern to be displayed. The screen turned black and I had to kill the PIM/PE task with Ctrl-Alt-Del. HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 06:00:43 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: Picture gallery / Minidisc labeling system Comments: To: Daniel Hertrich MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > Hi friends, > > have a look at Stephen McAinsh's picture gallery! > That's the way working (with the LX) is a real pleasure. > > http://www.colquhoun.com/stephen/gallery Thanks for the reference. I've done the John Muir Trail but divided it in 3 segments over 21 years (G) The last was the northernmost 95 miles, also solo about 7 years ago. The Muir Hut is this wonderful all stone structure with the stone roof in the middle of this wild and beautiful Muir Pass. Been atop Half Dome 3 times and it leaves me breathless - via the cable route. Got to get back to the Sierra. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 06:00:48 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: TECH: CPACK problem. Comments: To: "Jose M. Valdes R. YV5LIX" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > original CPACK diskette for installing the application has gone bad > also, and when I execute the INSTALL.EXE file I get the message "packed > file is corrupt", so now I can't transfer files to/from the HP-95. > > Can some one give me some help as were may I fiend a copy of CPACK or if > there is another software that I may use. The disk is fine. The program was designed and compiled under a quirky or buggy system. You need to find a copy of LOADFIX.EXE (com?) and run it with the install program. Probably in a copy of dos 6.x??? Or load a bunch of tsr's in memory to take up about 40-50k (at least) of memory and then try running the INstall again. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 06:00:50 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: Problems with Sandisk 220MB card Comments: To: Jeffrey Veiss MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Are you using an hp200 or hp100? That could affect things, too. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 07:21:42 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: Demo version of WWW/LX and PDU / SMS MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Daniel, > If this transfer limit is really the only limitation in the demo, it > should work, shouldn't it? > > Post/LX is not in any way limited in the demo, or is it? For me the web page www.dasoft.com tells a lot regarding demo version. I could copy it and send it to you. Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 4 Feb 2002 23:45:52 -0700 Reply-To: Jeffrey Veiss Sender: HPLX Mailing List From: Jeffrey Veiss Subject: Re: Problems with Sandisk 220MB card Comments: To: fjkaufman@worldnet.att.net In-Reply-To: <20020205060050.FUBY5540.mtiwmhc21.worldnet.att.net@worldnet.att.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Tue, 5 Feb 2002 fjkaufman@worldnet.att.net wrote: > Are you using an hp200 or hp100? That could affect things, too. hp200lx. How does it affect things? Thanks! -Jeff ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 08:04:55 +0100 Reply-To: radek.svagr@LGPHILIPS-DISPLAYS.COM Sender: HPLX Mailing List From: Radek Svagr Subject: Re: Commodore 64 & HP48 emulators MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii On a Vector site, there is a file HP48SX_UTL in a directory CALCULATORS. I downloaded it but that is all. There are some batch files which use another program (VZ.?) Because I don't speak japanese I don't know what is the purpose of this whole package:-( Radek Barry To: HPLX-L@UConnVM.UConn.Edu Sent by: HPLX cc: (bcc: Radek Svagr/HRC/COMP/PHILIPS) Mailing List Subject: Re: Commodore 64 & HP48 emulators Classification: 2002-02-04 05:21 PM Please respond to Barry Laust Brock-Nannestad wrote: > I've never seen an HP48 emulator for DOS that > wasn't a 32-bit DOS excecutable (compiled using > DJGPP), which pretty much rules out the LX. I downloaded an HP48s work-alike calculator written for the 95lx from CSHAND library in the early days of the 95lx. It wasn't an emulator. It wouldn't run ML or SYSRPL programs for the 48. But it would run RPL programs and acted like a 48 in every way I could see. The problem was that it was a pretty expensive shareware package and the downloadable version wouldn't save it's state so you started fresh every time. They said the full product always opened in the state it was last in. Also I remember thinking that the keyboard layout was pretty bad. I can't remember if it was customizable in the full product or not. I don't remember the price now but it was a bunch so I didn't get one. I already had a 48sx anyway. Now I wish I had bought it. If anyone has access to CSHAND and they still have the old library you might check and see if it's still there. I can't remember it's name. I probably have an old copy somewhere but I don't know which of my several hundred 5.25 disks it would be on and not remembering it's name I might not know it if I saw it. I'll look as I can though. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 09:42:57 +0100 Reply-To: Feher Tamas Sender: HPLX Mailing List From: Feher Tamas Subject: Re: LxPic and LxMap Comments: cc: zampach@nemcb.cz MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit Hello, >don't use LXPic 7.0 with LXMap (2.2)! Restart with wiping >date, time and some next data will be follow :-( You can only blame yourself! Stefan's original announcement in digest #2002-38 clearly said: >>Because of a different memory management of new LxPic, >>I had to adjust LxMap to work with LxPic >= v7.0. The advantage >>of the new LxMap is now... Sincerely: Tamas Feher. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 10:10:42 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Palm database->Hp 200lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Inigo On Tue, 5 Feb 2002 01:20:35 +0100, =?iso-8859-1?B?SfFpZ28=?= wrote: > Is it possible to somehow view a Palm database in the Hp 200lx? Can these > Palm databases be changed into something which is MS-DOS or Windows > compatible. I ask this because there is a very nice Movie database for the > palm: > http://www.magma.ca/~sheppard/IMDb/Palm.html If this is the "PDB" format, there is a pdb2csv converter on SUPER.... > which would be very cool to carry on our 200lx. That way I will know what to > choose when I go to rent a video. OTOH, there is also a film database for the 200LX, maybe a similar one, don't know. Go to www.palmtop.net and have a look into the database repository. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 10:10:43 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Demo version of WWW/LX and PDU / SMS MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Avi On Mon, 4 Feb 2002 22:43:04 -0500, A Meshar wrote: > He does not need to _buy_ WWW/LX Version 3! All he needs to do > is send an email to info@dasoft.com and tell me who he is, > what he is doing and I'll be honored to send him a > complimentary license of WWW/LX Version 3! (We did similar WOW, this is good news! I'll let him know. > Post.exe limited to one send one receive (also subject to the > 16K). but this doesn't apply to SMS, since sending / receiving is entirely handled by Robot scripts, right? Post/LX acts only as an offline viewer / writer for SMS. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 10:10:49 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Demo version of WWW/LX and PDU / SMS MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Helmuth On Tue, 5 Feb 2002 07:21:42 +0100, "Helmuth E. Guenther" wrote: > For me the web page www.dasoft.com tells a lot regarding demo version. > I could copy it and send it to you. Thanks - the only limitation which applies if you use the setup for SMS-only is the 16kB limit of www.exe. And of course the three beeps and the short delay at the www.exe start. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 10:09:29 +0100 Reply-To: radek.svagr@LGPHILIPS-DISPLAYS.COM Sender: HPLX Mailing List From: Radek Svagr Subject: SUPER - problem with Gem for the LX MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii I seem to have a problem with downloading %subj% from SUPER. It downloads everytime only 671kB and I cannot open it then, because file is not complete. Radek ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 11:10:43 +0100 Reply-To: Dzon Sender: HPLX Mailing List From: Dzon Subject: Docs for TaskBar-LX? MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Hello there, could you please tell me if there is some english documentation for TaskBar and where could I find that? Thanks -- -Dzon dzon@softhome.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 11:18:38 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: SUPER update MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable HP Staber wrote: > I think the ZIP archive on SUPER and on Stefans homepage were created > with a newer zipper software. I was unable to extract it on my palmtop > with PKUNZIP or UNZIP. Had to use my desktop and PowerArchiver to > extract the files. I use exclusively PKZIP V2.50 for years now. But I just zipped LXPIC 7.0 once again and uploaded it to my homepage, just in case something happend during upload. Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 11:18:40 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: LXPic and PXMap Comments: To: Pavel Zampach MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Pavel Zampach wrote: > don't use LXPic 7.0 with LXMap (2.2)! as I said in my announcement from last saturday: Because of a different memory management of the new LxPic, I had to adjust LxMap to work with LxPic >=3D 7.0. The advantage of the new LxMap is now, that maps may also be in GIF or JPG format. However, my recommendation are still B&W PCX maps for speed reasons. > Restart with wiping date, time and some next data will be follow :-( That should not happen! Both programs only read files, but never write to files. The new LxMap 3.0 was uploaded simultaneously on 02-FEB-02 to http://home.t-online.de/home/stefan.peichl/lxmap.zip and is now also available on SUPER. Thanks Daniel! Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 07:57:30 -0500 Reply-To: steve@CARDERFAMILY.NET Sender: HPLX Mailing List From: Steve Carder Subject: Re: TECH: CPACK problem. MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > when I try to install CPACK in the newer computer I found that the > original CPACK diskette for installing the application has gone bad > also, and when I execute the INSTALL.EXE file I get the message "packed > file is corrupt", so now I can't transfer files to/from the HP-95. The program used to make the packed file had a bug. It won't work when = running in the lower portion of DOS memory. Loading some TSRs before trying to = install it is one way to get around this. Steve Carder PGP public key on the server at http://pgp.mit.edu ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 14:17:39 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: 6 complete 200LX kits for sale MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit (Sorry if repeated, my provider loses messages at the moment) I have been given the opportunity to offer to the list: 5 packages English and one French consisting of: - 2MB 200LX in very good condition, cleaned and checked. No missing pixels, no hinge breaks, battery cover intact, etc. Complete with: - New and unused set of manuals ( Some still originally sealed, otherwise still new, but unsealed) The French LX has only the big manual. - Connectivity kit: Cable, 3 adapters ( Black 9-9 null modem (first five only!), printer and PC 25Pins connector) - no SW. - 100/240 volt Original HP Adapter (WestEuro prongs) - New holster type leather slipcase. - One CD-R with 300MB of LX related Software and info. ( my addition ;-) Cost: 150 Euro (net) plus shipping, ( EU/Europe about 20 Euro insured, rest of the world about 40 Euro). Conditions: Prepaid/Paypal or Bank Transfer/Giro. EU residents get priority (less hassle). Refund (without shipping costs) if not satisfied (say within a week.). The sixth who orders misses out on the null modem (The black Cross 9-9 pins ). Michel I will try to post pictures somewhere of one of these kits. As the rest of the LX's that these people have are hingebroken, also lots of spare parts available: Screen, keyboards, 1MB and 2MB motherboards - inquire. Please reply to my PERSONAL address, NOT to the list. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 08:57:05 -0500 Reply-To: Steve Sender: HPLX Mailing List From: Steve Subject: Re: CF card reader into serial port Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Hi Nathalie Nathalie Bugeaud wrote: > i just wondered if it is possible to connect a CF card reader via serial > cable to the serial port. would this make it "B"- drive ?!? You could connect to a computer using INTERLNK/INTERSVR or LapLink. You can access a CF card as a remote drive and map it to B: with ASSIGN or SUBST. I don't know of any stand alone serial CF readers. Steve ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 15:28:31 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: LXPic and PXMap Comments: To: Pavel Zampach MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Pavel Zampach wrote: > don't use LXPic 7.0 with LXMap (2.2)! > Restart with wiping date, time and some next data will be follow :-( I just reinstalled LxMap V2.2 on my system to see if it really can cause damage with LxPic V7.0. But all I get is a little garbage on the screen and then LxMap exits and you are again at the DOS prompt (in graphics mode however). No need to reboot or even to Ctrl-Shift-On. I cannot see why you had loss of data. Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 11:37:54 -0400 Reply-To: "Jose M. Valdes R. YV5LIX" Sender: HPLX Mailing List From: "Jose M. Valdes R. YV5LIX" Subject: Thanks CPACK problem MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi all. Thanks to everyone who answered my question, thanks to you all I have APP95 (CPACK) running and I can again use it to manage the files in my HP-95LX, all the suggestions and advices were in the right track, the disk was ok and the problem is with the way the installation file was compiled. By the way, APP95 works without problems on a DOS window under Windows XP Professional. Best regards to you and yours. Jose M. Valdes R. This message was scanned for viruses before it was sent. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 09:59:28 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Sandisk recognition over 220MB MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Tom Ziolkowski wrote: > Sorry to butt in here.. I recently got the Sandisk > 220MB PCMCIA card myself (from Silicon Salvage, > mentioned a while back here on the list) and I > found it necessary to use both fdisk100 and a format > command on it before my 2M 200LX could read/write > it. (Filer reported an "invalid media" error when I tried > to format it before using fdisk100, and a simple "Drive > Not Ready" on attempts to open the drive.) I don't > know if this was a fluke, because from what I've been > reading here it should have worked "out of the box". I had exactly t he same symptoms with a SimpleTech card I bought recently for $12 on ebay. But it's only a 32 meg card. It's my first non-Sandisk card so I thought at first it was a dud. But I formatted it on my Win98 laptop and it's working fine on everything including the 200lx. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 11:13:40 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: Problems with Sandisk 220MB card Comments: To: Jeffrey Veiss In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit I got the same card and it works fine for me. > > Hi All! > > I purchased a SanDisk 220MB Type 2 PCMCIA card and was wondering if > anyone else has noticed a similar problem as I'm experiencing. > > I've run FDISK100 and formatted on the card on the HP but sometimes > when I go to filer or DOS, it shows the card as empty. At > that point, > it will only show the contents of the card again after I > soft reboot. > > In addition, it usually takes quite a few seconds to get into Filer > when the card is inserted. > > Does anyone have similar experiences or thoughts about this? > > Thanks in advance! > > -Jeff ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 09:16:22 -0700 Reply-To: "Feldman, Robert" Sender: HPLX Mailing List From: "Feldman, Robert" Subject: Free software MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" We were cleaning out at work, and I saved the following from the trash bin: Borland Quarto Pro SE ("Special Edition" for home and office) 1.0, for MS-DOS. 2 copies w/docs, 1 copy 3.5" disks only, 2 copies 5.25" disks only. Borland Brief ("The Programmer's Editor") 3.1 for MS-DOS, w/docs, 1 copy. 2 copies Dell MS-DOS 5.0 (three 3.5" diskettes). The software is free for shipping costs, with the packages with docs weighing about 3 pounds, which will cost about $2.50 in the US. First-come, first served. Email me off-list at robert_feldman(at)jdedwards.com. Bob ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 17:59:40 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: SUPER - problem with Gem for the LX MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Radek On Tue, 5 Feb 2002 10:09:29 +0100, Radek Svagr wrote: > I seem to have a problem with downloading %subj% from SUPER. It downloads everytime only 671kB and I cannot open it then, because file is not complete. > I have no problem here to download the file from SUPER. The problem must be on your side. ;-) Have you tried variout browsers? If everything fails, let me know, I'll send you the file via email. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 13:17:30 -0500 Reply-To: Bruce_Martin@MANULIFE.COM Sender: HPLX Mailing List From: Bruce Martin Subject: Re: X-Finder .ZIP browsing MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii > I've found this cool thing İX-Finder¨ and I'd like to tune it for myself. > But I've found this, important for me, problem: When I tap Enter on .zip > archive, I can dive in, but just one level. When there is directory > structure on zip and I tap enter on directory, I cannot go deeper and it > just tries to open the directory in viewer, what makes no sense. Can you > please tell me where to set it up to behave correctly? > Hey, I never noticed this! My setup does this too. I'm using X-Finder R11.B14 and Pkunzip 2.04g. Are you also using Pkunzip? Searching the archives for this list leads me to believe that instead using Unzip (from S.U.P.E.R.) may clear up this problem. Unfortunately, S.U.P.E.R. is refusing connections right now, so I can't test this. Bruce in Toronto BTW, are you using any of my X-Finder "themes" yet? 8-) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 13:23:25 -0500 Reply-To: Damond Walker Sender: HPLX Mailing List From: Damond Walker Subject: 95lx? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit How many people on the list still use a 95lx? I have to say that it's the neatest little toy I've purchased in the last couple of years (got it off of ebay). HP used to make some *real* solid stuff. ;) Damo ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 19:55:11 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: SUPER update Comments: To: Stefan.Peichl@t-online.de MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Stefan On Tue, 5 Feb 2002 19:16:15 +0000, Stefan.Peichl@t-online.de wrote: > Daniel, would you please copy LXPIC.ZIP from my homepage > again to SUPER? Done. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 14:11:48 -0500 Reply-To: Bob Penick Sender: HPLX Mailing List From: Bob Penick Subject: Re: Sandisk recognition over 220MB Comments: To: Barry MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit ----- Original Message ----- From: "Barry" Sent: Tuesday, February 05, 2002 10:59 AM Subject: Re: Sandisk recognition over 220MB > I had exactly t he same symptoms with a SimpleTech card I bought > recently for $12 on ebay. But it's only a 32 meg card. It's > my first non-Sandisk card so I thought at first it was a dud. > But I formatted it on my Win98 laptop and it's working fine on > everything including the 200lx. > > Barry > A few months ago I bought a couple 64M Sandisk CF disks in PCMCIA adapters off eBay. I couldn't get them to read, format or Fdisk100 in my 200lx. (I think I was getting an invalid media error.) I tried on a Win98 box also and could not read or format. I fdisked on the Win98 laptop. That worked but I still could not read etc. on the palmtop. Getting desperate, I tried fdisking and formatting in my Omnibook 430. That worked and the card was readable in the palmtop. This happened several months ago and the sequence and specifics may be a little off. But I do remember that the Omnibook was the only way I got them to work in the palmtop. I asked the guy what they had been used in. He wasn't sure, but thought he had gotten them out of old Cisco routers. That was the second time I had picked up Sandisk cards that had been used in routers and they were purchased from different people. At least they came at a good price. Later, bob ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 14:11:49 -0500 Reply-To: Bing Sender: HPLX Mailing List From: Bing Subject: display of Chinese characters MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Hello, all. Anybody knows how to display Chinese characters in 200lx or any software is available? Bing ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 21:24:59 +0100 Reply-To: "Oliver W. Leibenguth" Sender: HPLX Mailing List From: "Oliver W. Leibenguth" Organization: www.Compuseum.de Subject: Re: 95lx? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > How many people on the list still use a 95lx? I still use my 95lx. That *might* change tomorrow because my 700lx is scheduled to arrive in less than 12 hours :-) > I have to say that it's the > neatest little toy I've purchased in the last couple of years (got it off of > ebay). It's a sad thing that HP stopped producing their best stuff. regards, Oliver ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 13:41:51 -0800 Reply-To: "Martin G. Ramirez" Sender: HPLX Mailing List From: "Martin G. Ramirez" Subject: Sandisk 220MB card & LX use Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Everyone, To all who posted recent details about this card, many thanks. I bought a 2nd one from Silicon Salvage last month, primarily to use for file transfer between my office Dell and a Toshiba Libretto. Hence, when I got the card, I formatted it in the Libretto under Win98, and it worked just fine in both the Dell and Libretto. My 200LX could not read it though, which seemed odd since the first card I got from Silicon Salvage in November worked fine in the LX, as well as the Dell and Libretto, right out of the box. In any case, thanks to the recent posts, I used Fdisk100 on the 2nd card, then formatted it with Filer, and now it can be used in all three systems. One question about this issue: does anyone know WHY formatting the card in Win98 FIRST would make the card unreadable in the LX? Martin G. Ramirez At 09:59 am 2/5/2002 -0600, you wrote: >Tom Ziolkowski wrote: >> Sorry to butt in here.. I recently got the Sandisk >> 220MB PCMCIA card myself (from Silicon Salvage, >> mentioned a while back here on the list) and I >> found it necessary to use both fdisk100 and a format >> command on it before my 2M 200LX could read/write >> it. (Filer reported an "invalid media" error when I tried >> to format it before using fdisk100, and a simple "Drive >> Not Ready" on attempts to open the drive.) I don't >> know if this was a fluke, because from what I've been >> reading here it should have worked "out of the box". > >I had exactly t he same symptoms with a SimpleTech card I bought >recently for $12 on ebay. But it's only a 32 meg card. It's >my first non-Sandisk card so I thought at first it was a dud. >But I formatted it on my Win98 laptop and it's working fine on >everything including the 200lx. > >Barry > >** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ============================ Dr. Martin G. Ramirez Department of Biology Loyola Marymount University One LMU Drive, MS 8220 Los Angeles, CA 90045-2659, U.S.A. (310) 338-5120 FAX: (310) 338-4479 e-mail: mramirez@lmu.edu ============================= NTMail K12 - the Mail Server for Education ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 17:49:48 -0500 Reply-To: Martin Bergvill Sender: HPLX Mailing List From: Martin Bergvill Subject: Re: Palm database->Hp 200lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit On Tue, 5 Feb 2002 01:20:35 +0100, =?iso-8859-1?B?SfFpZ28= wrote: > Hi everybody, > > Is it possible to somehow view a Palm database in the Hp 200lx? I do not know, but I really hope so. > Can these > Palm databases be changed into something which is MS-DOS or Windows > compatible. I ask this because there is a very nice Movie database for the > palm: > http://www.magma.ca/~sheppard/IMDb/Palm.html Ah this sounds very nice. I would really like this on my Hp200lx. Somehow to translate the Palm database to a Hp200Lx gdb would have been very nice. Sorry that I do not have a solution but I got a bit exited having the possability to have IMDB on my hplx :-) Regards -- Martin Bergvill ,Narvik Norway ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 17:49:50 -0500 Reply-To: Martin Bergvill Sender: HPLX Mailing List From: Martin Bergvill Subject: Re: Sandisk recognition over 220MB MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit On Mon, 4 Feb 2002 09:30:00 -0800, Tom Ziolkowski wrote: > One caveat with this though. The MacOS adds hidden files named "finder.dat" to > every directory on the card for compatibility with its own filesystem. The > presence of these files will prevent you from deleting directories back on the > LX (simply because the directory in question isn't empty). This caused me some > confusion for a while until I realised I just had to use attrib to unhide and > then delete them. I use Volkon Commander to delete dir's that are not empty. Thats the best tool for this..you do not have to fiddle around with attrib and all that..just choose what to delete. Regards -- Martin Bergvill ,Narvik Norway ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 00:09:11 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: Sandisk 220MB card & LX use In-Reply-To: <4.1.20020205133331.00b03b90@lmumail.lmu.edu> MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable Le Tue, 5 Feb 2002 13:41:51 -0800 "Martin G=2E Ramirez" a =E9crit: > One > question about this issue: does anyone know WHY formatting the card in > Win98 FIRST would make the card unreadable in the LX? Just an idea (I don't have Win98 to check) : could it be possible that it formats the card in FAT32 ? Remember that the HP200LX was released before this format=2E=2E=2E Jacques=2E ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 15:05:20 -0800 Reply-To: Harry Mulcahey Sender: HPLX Mailing List From: Harry Mulcahey Subject: www.palmtop.net offline? MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0020_01C1AE56.876EF1A0" This is a multi-part message in MIME format. ------=_NextPart_000_0020_01C1AE56.876EF1A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, I just joined this mailing list. Today I tried to access = palmtop.net, and it gave me a "this page cannot be displayed" error. = What's wrong? Is the server offline? If it is, when will it be online? ------=_NextPart_000_0020_01C1AE56.876EF1A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi, I just joined this mailing list. = Today I tried=20 to access palmtop.net, and it gave me a "this page cannot be displayed" = error.=20 What's wrong? Is the server offline? If it is, when will it be=20 online?
------=_NextPart_000_0020_01C1AE56.876EF1A0-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 17:11:34 -0700 Reply-To: Michael Kopplin Sender: HPLX Mailing List From: Michael Kopplin Subject: Re: Palm database->Hp 200lx In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Tue, 5 Feb 2002, Martin Bergvill wrote: > > Is it possible to somehow view a Palm database in the Hp 200lx? > I do not know, but I really hope so. There is a reader on super that works with some Palm database files, but not this one. > > Can these > > Palm databases be changed into something which is MS-DOS or Windows > > compatible. I ask this because there is a very nice Movie database for the > > palm: > > http://www.magma.ca/~sheppard/IMDb/Palm.html > > Ah this sounds very nice. I would really like this on my Hp200lx. > > Somehow to translate the Palm database to a Hp200Lx gdb would have been > very nice. Looks like this one is in peanutpress's proprietary format which means no translation. Perhaps this was a condition of IMDB granting Tom Sheppard permission to distribute it. No peanutpress Palm Reader for dos so I think we're out of luck. Mike ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 19:44:52 -0500 Reply-To: Larry Tachna Sender: HPLX Mailing List From: Larry Tachna Subject: Re: Sandisk 220MB card & LX use Comments: To: Jacques Belin In-Reply-To: <20020206000540.F95C.JBELIN@altern.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit >>Just an idea (I don't have Win98 to check) : could it be possible that it >>formats the card in FAT32 ? doubt it i believe a disk has to be at least .5 gig before windows will use fat32 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 13:51:19 +1300 Reply-To: th@PARADISE.NET.NZ Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: www.palmtop.net offline? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Wed, 6 Feb 2002 13:43:19 +1300 (NZDT) 01h37m59s ago ... On Tue, 5 Feb 2002 15:05:20 -0800, Harry Mulcahey wrote: > Hi, I just joined this mailing list. Today I tried to > access palmtop.net, and it gave me a "this page cannot be > displayed" error. What's wrong? Is the server offline? If > it is, when will it be online? I agree it doesn't seem to be there. From here it has been like that for at least a week. Well, whenever I have tried. I understand it was up at some stage. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 20:05:44 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Demo version of WWW/LX and PDU / SMS MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Daniel, > > Post.exe limited to one send one receive (also subject to the > > 16K). > > but this doesn't apply to SMS, since sending / receiving is entirely > handled by Robot scripts, right? Post/LX acts only as an offline viewer > / writer for SMS. I have no idea! I never use SMS at all. But you can try this; Comment out the key=3D param in post.cfg and see what happens. It may be that there is still a limitation. Maybe Andreas or Tony know? Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 20:05:45 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Sandisk recognition over 220MB Comments: To: Tom Ziolkowski MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > "Michel Bel" wrote on Sun, 3 Feb 2002 19:29:05 = +0100> > > > Barry wrote> > > > >> I just got a 256 meg Sandisk compact flash card from Ebay and > >> while I was waiting for it to get here I also intended to ask > >> for this driver since there's a lot of talk about it here. But > > > > Indeed, Barry, mine failed to work until I Fdisk100'd it on the LX, = then it > > worked fine. Seemed it was formatted on a W98 machine, and that seems > > unreadable on the LX > > > > I was confused by the constant info on this list that Sandisk's = PCMCIA's are > > only recognized up to 220MB. No matter how many times I posted that my Sandisk 440MB work fine with a driver, yet another ATA drive at 512MB works without a driver, the same people kept posting the incorrct message regarding 220M Sandisk is max. Not so! With driver it works fine to 440 and probably above that. And in fact I keep using my 512MB european made Memory Card Technology card WITHOUT a driver. I bet this pos will get a new collection of "it won't work beyond 220M" posts... Some people are stuck! ... Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 20:05:46 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Demo version of WWW/LX and PDU / SMS MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > Hi Helmuth > > On Tue, 5 Feb 2002 07:21:42 +0100, "Helmuth E. Guenther" wrote: > > > For me the web page www.dasoft.com tells a lot regarding demo version. > > I could copy it and send it to you. > > Thanks - the only limitation which applies if you use the setup for > SMS-only is the 16kB limit of www.exe. And of course the three beeps > and the short delay at the www.exe start. _That_ beeping and messages tells you that the limit is in force. I am not sure what Post/LX does in this case. Try it... Let us know. Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 02:13:51 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: X-Finder .ZIP browsing Comments: To: Bruce_Martin@MANULIFE.COM MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > > I've found this cool thing İX-Finder¨ and I'd like to tune it for myself. > > But I've found this, important for me, problem: When I tap Enter on .zip > > archive, I can dive in, but just one level. When there is directory > > structure on zip and I tap enter on directory, I cannot go deeper and it > > just tries to open the directory in viewer, what makes no sense. Can you > > please tell me where to set it up to behave correctly? > > > Hey, I never noticed this! My setup does this too. I'm using X-Finder > R11.B14 and Pkunzip 2.04g. Hey, anyone know what happened to our resident Xpert on Xfinder: Peniel Romanelli I have not seen anything from him in a while or have I missed postings? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 22:21:49 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: Re: www.palmtop.net offline? Comments: To: Harry Mulcahey MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0037_01C1AE93.815E7000" This is a multi-part message in MIME format. ------=_NextPart_000_0037_01C1AE93.815E7000 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Don't worry about it... Just try it again later... It seems to be down from time to time. ----- Original Message -----=20 From: Harry Mulcahey=20 To: HPLX-L@UConnVM.UConn.Edu=20 Sent: Tuesday, February 05, 2002 6:05 PM Subject: www.palmtop.net offline? Hi, I just joined this mailing list. Today I tried to access = palmtop.net, and it gave me a "this page cannot be displayed" error. = What's wrong? Is the server offline? If it is, when will it be online? ------=_NextPart_000_0037_01C1AE93.815E7000 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Don't worry about it... Just try it again=20 later...
 
It seems to be down from time to time.
----- Original Message -----
From:=20 Harry = Mulcahey=20
Sent: Tuesday, February 05, = 2002 6:05=20 PM
Subject: www.palmtop.net offline?

Hi, I just joined this mailing list. = Today I=20 tried to access palmtop.net, and it gave me a "this page cannot be = displayed"=20 error. What's wrong? Is the server offline? If it is, when will it be=20 online?
------=_NextPart_000_0037_01C1AE93.815E7000-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 11:45:30 +0800 Reply-To: "R.S." Sender: HPLX Mailing List From: "R.S." Subject: Re: display of Chinese characters Comments: To: Bing MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 7bit There are following softwares that can display GB code (used mostly in Main Land China). 1) NJCGA - a text editor (freeware) 2) GBlist - a text viewer (freeware) both have 64k size limitation, but work fine in HP100LX & 200LX.¨ There are programs that can convert B5 code (use in Taiwan & HK) to exe file, but will increase the file size 3 times. If you are interested, Let me know. Roger ----- Original Message ----- From: "Bing" To: Sent: Wednesday, February 06, 2002 3:11 AM Subject: display of Chinese characters > Hello, all. Anybody knows how to display Chinese characters in 200lx or > any software is available? > Bing > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 5 Feb 2002 22:48:06 -0500 Reply-To: Scott Dunaway Sender: HPLX Mailing List From: Scott Dunaway Subject: Sandisk Driver MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII I just purchased a 192MB Sandisk CF. It works in my USB CF Reader (SDDR-31) but my 200LX says 'Drive not Ready'. Help please. Scott Dunaway SDunaway@ford.com 313-84-50812 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 11:31:53 +0100 Reply-To: Karsten Hartmann Sender: HPLX Mailing List From: Karsten Hartmann Subject: Re: Around The World In 80 Minutes MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi everybody ... my first words to the list :) Greetings from germany, Paderborn. happy 200lx, 700lx owner :) -- HP 200LX : your choice for a new visibility manner ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 07:13:39 -0500 Reply-To: ronburnett@COMPUSERVE.COM Sender: HPLX Mailing List From: Ron Burnett Subject: Re: Sandisk Driver MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable My 192MB Sandisk CF works fine with no driver. For the larger CF, I = believe that Thaddeus supplies a driver, but I don't know whether they give it = away without buying a CF from them. Ron > > I just purchased a 192MB Sandisk CF. It works in my USB CF Reader > (SDDR-31) but my 200LX says 'Drive not Ready'. Help please. > > Scott Dunaway > SDunaway@ford.com > 313-84-50812 > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > --------------------------------------------------------------------------= ---- Generic Supplement Co-op: http://www.1shoppingcart.com/app/aftrack.asp?afid=3D12491 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 08:22:10 -0500 Reply-To: "Striegel, Alan" Sender: HPLX Mailing List From: "Striegel, Alan" Subject: Re: Stacker on PCMCIA cards MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" I am sorry to have let this sit for so long, but I just found the time to dig out the Stacker V2.0 box and the manual describes the SCREATE.COM command as "...ideal for quickly creating Stacked removable disks." In its explanation of the syntax and options for SCREATE.COM, it allows you to set the size of the available disk space to be used by the STACVOL.DSK file with the /S=sss.s option. The parameter you provide is in MB, allocated down to 0.1 MB. For this version, the maximum is 256 MB. The same manual says that if you want to continue to see the original drive with its uncompressed contents, then you remove the '@' from in front of the STACVOL.xxx filename on the DEVICE=STACKER.COM line of your CONFIG.SYS file. Alan Striegel -----Original Message----- From: Yves Leurquin İmailto:leurquin@BIGFOOT.COM¨ Sent: Sunday, January 27, 2002 7:15 AM To: HPLX-L@UConnVM.UConn.Edu Subject: Re: Stacker on PCMCIA cards Alan, > On the subject of Stacker, Yves Leurquin implied that it required the entire > volume to be compressed, but that has never been true. I routinely created > Stacked volumes that took up only part of a drive. As I recall, this was > not the default behavior, but it was always possible. For speed, I always > created the volume (stacvol.*) files on my desktop and moved them onto the > SRAM or flash cards that I used in the palmtop. I would love to be proved wrong but from what I recall from the time I tried to setup stacker on the LX it is not possible, on a _removable_ media (i.e. Flash card A: drive), to mount the stacker volume _and_ at the same time access the uncompressed portion of the flash card. It is possible to create a stacer volume which is smaller than the full flash card capacity but once it is mounted, it substitutes the A: drive letter and prevents access to the physical A: drive. On a fixed drive (e.g. C: drive) however, it is indeed possible to access the physical C: drive _and_ the mounted stacked volume. As said above, please let me know if I am wrong and I will dig up my old Stacker 4.0 disks to give it another try. \/ /ves ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 09:31:27 -0500 Reply-To: Bruce_Martin@MANULIFE.COM Sender: HPLX Mailing List From: Bruce Martin Subject: Windows Theme for the X-Finder Comments: To: harrym@lcvm.com MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii > Hello. I would like to know how to use your Windows theme for the X-Finder. Thank you. Goodbye. > Hi Harry, From my Web page at http://www.angelfire.com/ego/palmtop : (begin quote) How to use: It's easiest to use X-Finder itself to move downloaded files to their appropriate locations. First, back up your X-Finder files in case you wish to return to your former set-up! Then copy into your Finder directory (A:/FINDER by default) all .XBG files and the CURSOR.ICN file from the .LZH archive you downloaded. Next, copy all file .ICNs you wish to use into your file icon archive (A:/FINDER/ICON.LZH by default), and folder .ICNs into your folder icon archive (A:/FINDER/ICONFLD.LZH by default). Finally, use Memo or another editor to edit the appropriate lines in your environment file (A:/FINDER/FINDER.ENV by default) as indicated in the *SET.TXT file, and re-start X-Finder. (...) Please note: These themes are optimized for X-Finder Release 11 Beta 13. They will work with earlier versions, but certain features may not be available to you. If you are using an earlier version of X-Finder, for example, unselected windows don't normally display faded. In this case, you should do the following in DOS: RENAME RIGHT.XBG RIGHT.000 (Enter) COPY LEFT.XBG RIGHT.XBG (Enter) (end quote) There is more detail on the Web page, if you are interested. I hope this helps! Bruce in Toronto ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 13:46:45 +0200 Reply-To: Nigel Sender: HPLX Mailing List From: Nigel Subject: Re: 95lx? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Nigel R in South Africa is using but would not classify as a 'toy'! Given the abundance of applications that can be run, the HP95LX in my experience is a VERY productive tool. R/H hinge crack has just become major so my unit is currently 'desk bound' with the screen propped against the corner of my equally old (and well engineered) HP LaserJet 2/3P (the one with a built in serial port that is attached directly to my LX). Don't worry, although the LX normally travels everywhere I go (and will again after a dollop of epoxy putty has been applied to the appropriate parts), the printer being a little larger stay on my desk ! Trust everyone is SMILING! Very best regards from Nigel R in sunny South Africa ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 22:55:34 -0800 Reply-To: xy mox Sender: HPLX Mailing List From: xy mox Subject: Re: charging won't work Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Hi Daniel, Yes, bingo! that thin wire broken. i just replace pair wires and resolder it at night. also cleaned up whole PCB/keyboard. :-) Thanks your help! Billy P.S> Bing I'm using DingDang "dddos" CGA chinese editor it support GB code only, u can using some line tools for conversion. ex: HC from unix Hello On Fri, 1 Feb 2002 01:09:12 -0800, xy mox wrote: > hmm. hmm... really want to cry.... > my 200 with me around 7 year and i charging it > every two week. last night, dunno y i try plug a adaptor for > recharging. when i open charge-it, it said not charging.... > hmm.. so i think my machine internal power module > have problem. even i replace other new AC adaptor. Probably not an electronics problem (if you didn't recognize any strange behaviour like buzzing noise, extensive heat....). I assume there is simply one of the two thin wires broken which connect the power jack with the mainboard. Do you have any palmtop hardware skills? If you are able to open the LX, it's not such a big deal to resolder the wire if it's broken. GTX daniel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 16:04:23 +0100 Reply-To: "Oliver W. Leibenguth" Sender: HPLX Mailing List From: "Oliver W. Leibenguth" Organization: www.Compuseum.de Subject: Re: 95lx? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > R/H hinge crack has just become major İ....¨ Hinge cracks on a 95lx? Never heard of that before. regards, Oliver (who is playing with his new 700lx all day *bg) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 09:22:35 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Commodore 64 & HP48 emulators MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Radek Svagr wrote: > On a Vector site, there is a file HP48SX_UTL in a > directory CALCULATORS. I downloaded it but that > is all. There are some batch files which use another > program (VZ.?) Because I don't speak japanese I > don't know what is the purpose of this whole package What site is that? Do you think the 48 simulator I described might be there? Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 09:31:08 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: 95lx? MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Damond Walker wrote: > How many people on the list still use a 95lx? I have to say that it's the > neatest little toy I've purchased in the last couple of years (got it off of > ebay). I still have 2 95lxs from back in the olden days. My plan is to use them to make an on-board development system from scratch, starting with just the built-in debug. I keep telling myself this is what I'm going to do but I've been saying it for years and I'm no longer convinced that I mean it. :) It's not as useful as the 100/200lx but it's really a more elegant design and a much better keyboard layout. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 16:43:45 +0100 Reply-To: Feher Tamas Sender: HPLX Mailing List From: Feher Tamas Subject: Antivirus software for HP200LX. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit Hello all, The only antivirus program I heard of, which still has a currently maintaned 16-bit DOS version, is DialogueScience DrWeb. It is free for downloads from together with its virus-database add-ons, totalling 1300kB. It does not detect all the viruses in its description files (because these files are common with the fully-capable DOS/32bit variant) but would probably protect you from any malware, that can threaten a PC/XT. The glitch is: its user-interface is russian-only. Sincerely Yours: Tamas Feher. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 11:46:57 -0400 Reply-To: "Jose M. Valdes R. YV5LIX" Sender: HPLX Mailing List From: "Jose M. Valdes R. YV5LIX" Subject: Re: 95lx? In-Reply-To: <001701c1af1d$7443d740$e05cef9b@new.co.za> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi Nigel. I also use my HP-95LX almost every day, I bought it in November 1991, and I also will not classify it as a "toy", I ran many applications in RAM cards while on the field and has always been trustworthy; I even made a connector to plug it in in my car, so I can use it mobile without depleting the batteries. Interesting thing that of cracks in the hinges, many of my friends also have HP-95LXs and I have never seen that problem, do you have an Idea about what may have cause it? it will be nice to know the reason so we can avoid it. Best regards to you and yours. Jose M. Valdes R. Caracas, Venezuela. > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@UCONNVM.UCONN.EDU¨ On > Behalf Of Nigel > Sent: Wednesday, February 06, 2002 7:47 AM > To: HPLX-L@UCONNVM.UCONN.EDU > Subject: Re: 95lx? > > > Nigel R in South Africa is using but would not classify as a 'toy'! > > Given the abundance of applications that can be run, the > HP95LX in my experience > is a VERY productive tool. > > R/H hinge crack has just become major so my unit is currently > 'desk bound' with > the screen propped against the corner of my equally old (and > well engineered) HP > LaserJet 2/3P (the one with a built in serial port that is > attached directly to > my LX). Don't worry, although the LX normally travels > everywhere I go (and will > again after a dollop of epoxy putty has been applied to the > appropriate parts), > the printer being a little larger stay on my desk ! > > Trust everyone is SMILING! > > Very best regards from Nigel R in sunny South Africa > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 09:47:58 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Palm database->Hp 200lx MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Martin Bergvill wrote: >> Can these Palm databases be changed into something which >> is MS-DOS or Windows compatible. I ask this because there >> is a very nice Movie database for the palm: > > Ah this sounds very nice. I would really like this on my Hp200lx. By palm database I'm sure you mean a .pdb file but that doesn't work the same on the palm that it doesn on the PC. On a PC you can often tell from the extension what data it contains and how it's formatted. On the 200lx, for example, Lotus files are .wk1 and phonebook files are .pdb and database files are .gdb. On the palm there are only two extensions, .prc and .pdb. Usually, but not always, .prc is an executable file and .pdb is a database file. That's all the extension tells you and even that isn't reliable. A pdb file can be a database file from any program and each program will have it's own internal format for the file. One pdb file might not (and probably doesn't) have anything in common with another pdb file. Ebooks are stored in pdb files. This is true for the format most ebooks are in, the doc format. They have a pdb extension. Some ebook readers have their own format and also are in files with a pdb extension. Phone numbers and addresses are saved in a pdb file. Your schedule is saved in a pdb file. Buy a program that saves data of any kind and it'll probably save it in a pdb file. But those files have nothing in common. Palm made it confusing in a world where we're used to the extension describing the file by building a system where that just isn't true. So if you want a program to read Palm database files on a 200lx, you first have to decide which file. What program created it and what program reads it? Then get the format for that particular type file and create an LX program for it. If you want to be able to read any and every palm database file you'll end up with hundreds of programs. Possibly thousands. All to read pdb files. :) Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 10:57:00 -0500 Reply-To: Damond Walker Sender: HPLX Mailing List From: Damond Walker Subject: Re: 95lx? MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit I'm beginning to think I shouldn't of called my 95 a toy. :) Has anyone here put any thought into designing a "modern" DOS based handheld? I wouldn't thing that it would be all that hard to do -- a prototype would be ugly I'm sure. But I think it would be a cool thing to hack on. I've always loved the idea of "instant on" -- grab a low-power 386/486, give it 16megs to 36megs, load FreeDOS and start from there. Easy! ;) Damond ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 09:55:28 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Palm database->Hp 200lx MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Michael Kopplin wrote: > Looks like this one is in peanutpress's proprietary format which > means no translation. Perhaps this was a condition of IMDB > granting Tom Sheppard permission to distribute it. No > peanutpress Palm Reader for dos so I think we're out of luck. I read a discussion on a Palm newsgroup not long ago about converting Peanut Press formatted books. There were a couple of programs mentioned that can do it. It seems some of the Peanut Press books are encrypted but a lot aren't encrypted and those can be converted. I'm not sure but I think they were talking about converting to text. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 17:07:25 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: Emu48 and HP200LX In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable Le Tue, 5 Feb 2002 00:27:28 +0100 Erwann ABALEA a =E9crit: > Well=2E=2E=2E If it's not possible to emulate an HP48, it should at least = be > possible to simulate one=2E=2E=2E It should be possible to have a nearly > infinite stack, to deal with reals, complex, matrices, vectors, lists, > strings, RPL programs, =2E=2E=2E and still possible to manipulate symbolic > objects, all at a decent speed=2E=2E=2E Do you know pscalc95 ? Not realy a HP48 emulation, but it could interest you=2E=2E=2E It is more a HP28 clone, made for the HP95, but it works without great problems on an HP200=2E I use it as my DOS-mode calculator=2E look at : http://ftp=2Emonash=2Eedu=2Eau/pub/palmtop/pscalc=2Elzh (note that it is an LZH file=2E=2E=2E) İBTW Daniel, you should perhaps look at the page=20 http://ftp=2Emonash=2Eedu=2Eau/pub/palmtop/INDEX,=20 there is a lot of 95/100 software=2E Some of them are probably missing on SUPER=2E=2E¨ Jacques=2E ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 11:49:38 -0500 Reply-To: Bob Penick Sender: HPLX Mailing List From: Bob Penick Subject: Re: 95lx? Comments: To: Damond Walker MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit ----- Original Message ----- From: "Damond Walker" Sent: Wednesday, February 06, 2002 10:57 AM Subject: Re: 95lx? > Has anyone here put any thought into designing a "modern" DOS based > handheld? More times than you can imagine..... But, if you can, I wish you luck! > I've always loved the idea of "instant on" -- grab a low-power 386/486, give > it 16megs to 36megs, load FreeDOS and start from there. Go to eBay and buy an HP Omnibook 300, 425 or 430. You will have a little less memory and it will be a little bigger than you want, but it will save you a lot of engineering costs and design time. ;-) bob ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 18:01:58 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: Antivirus software for HP200LX. In-Reply-To: <000901c1af25$0ff15710$162fa8c0@2fkft.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable On Wed, 6 Feb 2002, Feher Tamas wrote: > The only antivirus program I heard of, which still has a currently > maintaned 16-bit DOS version, is DialogueScience DrWeb. It is free for > downloads from together with its virus-database add-ons, Isn't there a DOS version of VirusScan from McAfee? Or maybe it's a 32bit version... ? --=20 Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- Moi je trouve qu'il est debile de vouloir detruir kekel ke chose MG> Ta touche k est coinc=E9e ? -+- G in GNU : dans le kk jusqu'au cou -+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 13:15:57 -0400 Reply-To: "Jose M. Valdes R. YV5LIX" Sender: HPLX Mailing List From: "Jose M. Valdes R. YV5LIX" Subject: Re: Antivirus software for HP200LX. In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable When you create a rescue disk, McAfee or Norton, the files that are written to it are for DOS use, I see no reason why this files can't be use with the 200LX; now, this are files to be run manually to scan the system for virus, and they will not provide continuous background protection while running applications. Jose M. Valdes R. Caracas, Venezuela. > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@UCONNVM.UCONN.EDU¨ On=20 > Behalf Of Erwann ABALEA > Sent: Wednesday, February 06, 2002 1:02 PM > To: HPLX-L@UCONNVM.UCONN.EDU > Subject: Re: Antivirus software for HP200LX. >=20 >=20 > On Wed, 6 Feb 2002, Feher Tamas wrote: >=20 > > The only antivirus program I heard of, which still has a currently > > maintaned 16-bit DOS version, is DialogueScience DrWeb. It=20 > is free for > > downloads from together with its=20 > virus-database add-ons, >=20 > Isn't there a DOS version of VirusScan from McAfee? Or maybe=20 > it's a 32bit > version... ? >=20 > --=20 > Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 > ----- > Moi je trouve qu'il est debile de vouloir detruir kekel ke chose > MG> Ta touche k est coinc=E9e ? > -+- G in GNU : dans le kk jusqu'au cou -+- >=20 > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml >=20 >=20 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 18:19:14 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: 95lx? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Damond On Wed, 6 Feb 2002 10:57:00 -0500, Damond Walker wrote: > I'm beginning to think I shouldn't of called my 95 a toy. :) Good thought. ;-) > Has anyone here put any thought into designing a "modern" DOS based > handheld? I wouldn't thing that it would be all that hard to do -- a > prototype would be ugly I'm sure. But I think it would be a cool thing to > hack on. > > I've always loved the idea of "instant on" -- grab a low-power 386/486, give > it 16megs to 36megs, load FreeDOS and start from there. So you know MorphyOne? http://www.morphyplanning.co.jp BTW: There are (new?) pictures of a MorphyOne which boots Linux and DOS at http://www.morphyplanning.co.jp/Products/MorphyOne/index.htm#20020121 Very interesting pictures, and now that I write the link, I guess the photos are from 21st JAN 2002... ;-) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 18:26:51 +0100 Reply-To: Sidney Ho Sender: HPLX Mailing List From: Sidney Ho Subject: IBM's tiny Index card-sized computer has typical notebook power Mime-version: 1.0 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable An upcoming announcement of potential interest to HPLX users, more details at: Perhaps we HPLX users should give IBM some feedback on how to keep this thing really "pocket" portable (and, hence, USEFUL), lower power, longer battery life etc. etc.???. A brick isn't useful. The summary: --- IBM to unveil tiny prototype Index card-sized computer has power of typical notebook NEW YORK, Feb. 6 =8B International Business Machines Corp.=B9s research divisio= n says it has developed a prototype of a portable computer module that is the size of a small pad of paper and has the computing power of a typical notebook or desktop computer. THE PORTABLE computing device, which IBM Research will unveil on Feb. 11 at a technology conference in Phoenix, Ariz., includes 128 megabytes of dynami= c random access memory, a 10-gigabit hard drive and a microprocessor that run= s at 800 megahertz, or 800 million cycles per second. =A0 =A0 =A0 =A0=B3We=B9ve taken the PC down to where you can take it home and finish your work,=B2 said Kenneth Ocheltree, manager for next generation mobile at IBM Research. =A0 =A0 =A0 =A0Code-named =B3MetaPad=B2, the module is 5 inches (12.7 cm) long, 3 inche= s (7.6 cm) wide and about three-quarters of an inch (1.9 cm) thick. The modul= e fits into a larger accessory piece that includes a small, flat screen on front and is about 6 inches (15.2 cm) long, 4 inches (10 cm) wide and 1 inc= h (2.5 cm) thick.=20 --- Sidney Ho Lucerne, Switzerland (for the "around the worlders") ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 19:28:11 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Screens with missing lines MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Friends, I was able to confirm with a second screen which had missing lines that it seems that missing lines can be fixed in most cases! So don NEVER dispose your screen if it has only a few missing lines (horizontal or vertical). It seems that the screen manufacturer, Hitachi, didn't do a good job when soldering the ICs on the back of the screen ciruit board. The failure seems always to be one IC which is not soldered properly onto the board. I have set up a "testbed" here with a 100LX motherbaord, a screen flat cable, a power supply and a piece of hard foam to press the screen cable onto the screen contacts, so I can handle the hole screen freely WHILE it is driven by the motherboard. Connect the power supply, observe the missing lines and use your thumb nails to gently run over every IC pin row. When the lines which were missing before begin to flicker, you have found the responsible pin row. Then simply use an SMD soldering device (300 degrees Celisuis hot air blowing) to solve the tin a little and let it connect anew with the IC legs. Then let it get cold as slow as possible (so that no mechanical stress is forcing the IC pins to deconnect again), and see if you have ficed the screen. It MIGHT be a good idea to apply a little bit more tin to the bad contacts, but ONLY if you have the necessary SMD soldering skills and such fine tin so that you don't produce short-circuits between the legs. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 12:57:36 -0600 Reply-To: rob@rclewis.com Sender: HPLX Mailing List From: robert c lewis Subject: Re: Screens with missing lines Comments: To: Daniel Hertrich In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Daniel, Do you mean there is a particular IC on which the failure usually in relation to the missing lines, and if so which one? I had figured it was probably an open solder joint because I can make the lines disappear by pressing in certain ways on the back of the screen (top of the LX) while powered up. But upon removing the screen from the unit I saw no way to power it up while still connected, and was thus at a loss to find the problem while the screen was out of the unit. I didn't want to risk trying to solder ALL of the joints (and then maybe still not have it fixed since it might have been on the other side). So I put it back together and have just been living with it since. Another type of intermittant screen problem also sometimes occurrs in my machine is that when I first tun the unit on, the screen is flashing (and actually making a sort of buzzing noise although very quiet), but this can also be usually stopped, when it occurrs, by opening and closing the cover several times or pressing on the top of the unit, so I suppose that is probably also an open connection somewhere, but again the question would be how to find it. Thanks for the tip. I'll maybe give it another go and try to find the specific pins unless you have specific advice on which IC causes the missing line problem. Rob On Wed, 6 Feb 2002, Daniel Hertrich wrote: > Hi Friends, > > I was able to confirm with a second screen which had missing lines that > it seems that missing lines can be fixed in most cases! So don NEVER > dispose your screen if it has only a few missing lines (horizontal or > vertical). > (snip) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 20:04:36 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Re: 6 complete 200LX kits for sale MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit All Sold now.... Michel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 11:59:44 -0700 Reply-To: Bob Christopher Sender: HPLX Mailing List From: Bob Christopher Subject: It's About Time ! Comments: To: Pocketcam-l Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable 02/01/02 Microsoft stops new work to fix bugs By William Jackson GCN Staff Microsoft Corp. today announced a month-long moratorium on new= coding as part of its Trustworthy Computing Initiative, said Richard Purcell, head of the company=92s corporate privacy office. =93We are= not coding new code as of today for the next month,=94 Purcell said at= a privacy and data security summit in Washington that was sponsored= by the Privacy Officers Association. Instead, the company is going to go over its old code as a first= step in cleaning out bugs. Purcell likened it to a 20-year spring cleaning. =93It=92s time to get the garage cleaned out,=94 he said. Describing the state of computing today as unstable and= unreliable, he said Microsoft chairman Bill Gates =93is really annoyed by the incredible pain we put everyone through in computing.=94 Bob Bob Christopher Littleton, Colorado USA bob@palmtop.com= HP 200-LX Palmtop . Minox Cameras . All The Small Stuff ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 20:21:20 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: Antivirus software for HP200LX. MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Feher Tamas wrote: > > The only antivirus program I heard of, which still has a currently > maintaned 16-bit DOS version, is DialogueScience DrWeb. It is free for > downloads from together with its virus-database add-ons, > totalling 1300kB. It does not detect all the viruses in its description > files (because these files are common with the fully-capable DOS/32bit > variant) but would probably protect you from any malware, that can > threaten a PC/XT. > > The glitch is: its user-interface is russian-only. I'm sure there is other DOS antivi soft availlable. For our palmtop I would assess risk<->effort prior to putting some megabytes of code onto my machine. I have been using my LX extensively the past 6 years and did not experience any attack. My judgement is that chances for an attack in the next 6 years are close to nil. So I don't see a necessity to put antivi soft on my palmtop. Of course this is mmy private opinion only 8-) HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 19:15:24 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Re: 6 complete 200LX kits for sale MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit All sold for the moment..... Looking into other sources... Michel ----- Original Message ----- From: "Michel Bel" To: Sent: Tuesday, February 05, 2002 2:17 PM Subject: 6 complete 200LX kits for sale > (Sorry if repeated, my provider loses messages at the moment) > > I have been given the opportunity to offer to the list: > > 5 packages English and one French consisting of: > > - 2MB 200LX in very good condition, cleaned and checked. No missing pixels, > no hinge breaks, battery cover intact, etc. Complete with: > > - New and unused set of manuals ( Some still originally sealed, otherwise > still new, but unsealed) > The French LX has only the big manual. > > - Connectivity kit: Cable, 3 adapters ( Black 9-9 null modem (first five > only!), printer and PC 25Pins > connector) - no SW. > > - 100/240 volt Original HP Adapter (WestEuro prongs) > > - New holster type leather slipcase. > > - One CD-R with 300MB of LX related Software and info. ( my addition ;-) > > Cost: 150 Euro (net) plus shipping, ( EU/Europe about 20 Euro insured, rest > of the world about 40 Euro). > > Conditions: Prepaid/Paypal or Bank Transfer/Giro. EU residents get priority > (less hassle). Refund (without shipping costs) if not satisfied (say within > a week.). The sixth > who orders misses out on the null modem (The black Cross 9-9 pins ). > > Michel > > I will try to post pictures somewhere of one of these kits. > > As the rest of the LX's that these people have are hingebroken, also lots of > spare parts available: Screen, keyboards, 1MB and 2MB motherboards - > inquire. > Please reply to my PERSONAL address, NOT to the list. > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 13:29:12 -0700 Reply-To: "Feldman, Robert" Sender: HPLX Mailing List From: "Feldman, Robert" Subject: OT: RE: It's About Time ! Comments: To: Bob Christopher MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Are you sure the story was not dated "04-01-02"? I'll believe it when I see the results. Bob -----Original Message----- From: Bob Christopher İmailto:bob@PALMTOP.COM¨ Sent: Wednesday, February 06, 2002 1:00 PM To: HPLX-L@UCONNVM.UCONN.EDU Subject: It's About Time ! 02/01/02 Microsoft stops new work to fix bugs By William Jackson GCN Staff Microsoft Corp. today announced a month-long moratorium on new coding as part of its Trustworthy Computing Initiative, said Richard Purcell, head of the company's corporate privacy office. "We are not coding new code as of today for the next month," Purcell said at a privacy and data security summit in Washington that was sponsored by the Privacy Officers Association. Instead, the company is going to go over its old code as a first step in cleaning out bugs. Purcell likened it to a 20-year spring cleaning. "It's time to get the garage cleaned out," he said. Describing the state of computing today as unstable and unreliable, he said Microsoft chairman Bill Gates "is really annoyed by the incredible pain we put everyone through in computing." Bob Bob Christopher Littleton, Colorado USA bob@palmtop.com HP 200-LX Palmtop . Minox Cameras . All The Small Stuff ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 16:00:26 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: It's About Time ! In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > Are you sure the story was not dated "04-01-02"? > > I'll believe it when I see the results. > > Bob > One month to correct years worth of shoddy programming? What results should we expect? Not much, I think. I think what they need to do is form a wholly separate division charged with code correction and reporting directly to the board of directors of the company. Kinda like a federal prosecutor. It should be staffed by individuals picked from key development areas in the company as well as security experts from outside the company. They would have access to all source code and have the power to enforce changes in code already written. They would be also charged with publishing development standards and policies to assure secure coding practices. The security division would have to be given the power to enforce their standards within the company in order for it to work. If MS does something like this then I would believe that they have become serious about security. until then it's just a bunch of talk. snip > -----Original Message----- > From: Bob Christopher İmailto:bob@PALMTOP.COM¨ > Sent: Wednesday, February 06, 2002 1:00 PM > To: HPLX-L@UCONNVM.UCONN.EDU > Subject: It's About Time ! > > > 02/01/02 > > Microsoft stops new work to fix bugs > > By William Jackson GCN Staff > > Microsoft Corp. today announced a month-long moratorium on snip ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 22:10:01 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: It's About Time ! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Bob On Wed, 6 Feb 2002 11:59:44 -0700, Bob Christopher wrote: > Purcell, head of the company-s corporate privacy office. -We are not > coding new code as of today for the next month,- Purcell said at a They probably need about 10 years. One single month cannot be very effective to clean out bugs in MS software. But at least they don'T produce crap in that month. ;-) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 22:10:03 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Screens with missing lines MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Robert On Wed, 6 Feb 2002 12:57:36 -0600 (CST), robert c lewis wrote: > Do you mean there is a particular IC on which the failure usually in > relation to the missing lines, and if so which one? Not a specific one. But as a rule of thumb the IC is about _near_ the missing lines. So, if the lines are vanishing on the right side, the IC is probably also on the right side. And so on. > I had figured it was probably an open solder joint because I can make the > lines disappear by pressing in certain ways on the back of the screen (top > of the LX) while powered up. But upon removing the screen from the unit I Yes. That's a certain indicator for a bad solder joint. > saw no way to power it up while still connected, and was thus at a loss to > find the problem while the screen was out of the unit. I didn't want to > risk trying to solder ALL of the joints (and then maybe still not have it I have worked out a solution for that problem: Carefully remove the display cable from out of the screen case (it's only fixed there with adhesive tape), cut a piece of elastic, but firm material, such as hard foam or so, to a block of about 2cm * 2cm * 5cm, cut a gap into on long side and use it to jam the screen contacts together with the cable so the contacts are established everywhere. This should apply a quite well distributed force onto all the screen contacts. See the picture http://www.daniel-hertrich.de/screentest.jpg I'll put up a few better pictures soon.... So I am able to let the mainboard produce a picture and at the same time wiggle on the IC contacts on the back. > Another type of intermittant screen problem also sometimes occurrs in my > machine is that when I first tun the unit on, the screen is flashing (and > actually making a sort of buzzing noise although very quiet), but this can > also be usually stopped, when it occurrs, by opening and closing the cover > several times or pressing on the top of the unit, so I suppose that is > probably also an open connection somewhere, but again the question would > be how to find it. Well, if it only apprears once when turning on the LX, it may be hard to find. But maybe you will find it on the same way. > Thanks for the tip. I'll maybe give it another go and try to find the > specific pins unless you have specific advice on which IC causes the > missing line problem. Good luck It's a pity that replacement screens are so hard to find nowadays. We have to save every screen we can! GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 22:10:05 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: charging won't work MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Billy On Wed, 6 Feb 2002 22:55:34 -0800, xy mox wrote: > Yes, bingo! that thin wire broken. > i just replace pair wires and resolder it at night. > also cleaned up whole PCB/keyboard. :-) Great. I'm glad you have solved your problem! GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 07:09:52 +1100 Reply-To: Russell Hemery Sender: HPLX Mailing List From: Russell Hemery Subject: Eveready Lithiums Repackage? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Hi all There was a thread a while back about the eveready redtop lithiums and prices. I found them again yesterday here in Australia. They have a major repackaging. Now are silver and blue with the E2 logo and "photo" Price at Dick Smith electronics is AUD$12 for 2. Is this just an Australian repackage or is it worldwide? I havent seen the red tops for a while. Question for the list. There was a 3.6V Lithium AA size as well. Does anyone know what 3.6V would do in the LX? Just wondering about 2x3.6V lithiums in parallel as a power source. Regards Russell ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 23:17:48 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: It's About Time ! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Bob Christopher wrote: > Microsoft Corp. today announced a month-long moratorium on new coding > as part of its Trustworthy Computing Initiative, said Richard Only a month? > Describing the state of computing today as unstable and unreliable, > he said Microsoft chairman Bill Gates -is really annoyed by the > incredible pain we put everyone through in computing.- Why did it take them 10+ years to get message? Microsoft's code isn't the problem, *Microsoft* is the problem. Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 23:17:55 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: Eveready Lithiums Repackage? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Russell Hemery wrote: > There was a thread a while back about the eveready redtop lithiums and > prices. I found them again yesterday here in Australia. They have a major > repackaging. Now are silver and blue with the E2 logo and "photo" Price at > Dick Smith electronics is AUD$12 for 2. Is this just an Australian > repackage or is it worldwide? I havent seen the red tops for a while. The USA also changed to the blue/silver package. > Question for the list. There was a 3.6V Lithium AA size as well. Does > anyone know what 3.6V would do in the LX? Just wondering about 2x3.6V > lithiums in parallel as a power source. Parallel? Don't know. Let us know after you've tried it and whether you still have a working LX or not. :-) Of course you'd have to rewire the battery compartment and then you wouldn't be able to use normal AAs so I think that would be a bigger loss than any possibile gain from being able to use the new batteries. Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 00:25:28 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Re: Screens with missing lines Comments: To: Daniel Hertrich MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Daniel Hertrich wrote: > > I have set up a "testbed" here with a 100LX motherbaord, a screen flat > cable, a power supply and a piece of hard foam to press the screen > cable onto the screen contacts, so I can handle the hole screen freely > WHILE it is driven by the motherboard. > > Connect the power supply, observe the missing lines and use your thumb > nails to gently run over every IC pin row. > When the lines which were missing before begin to flicker, you have > found the responsible pin row. Funny, reading about your testbed.... Just 1 hour before I received your message I did snip off most off the right side of a badly broken LX top, and set up a testbed just like that... Found three screens out of five repairable.. two have broken zebra cables. The difference is, that I do't have to press anything. I screw the screen in the remaining left part, and test the screen that way. Daniel, do you want a broken top plus cable from me for that purpose? (as a token of appreciation for your work for this list )Presnipped to save mailing cost ;-) Michel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 01:36:29 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: Sandisk 220MB card & LX use In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Le Tue, 5 Feb 2002 19:44:52 -0500 Larry Tachna a =E9crit: > doubt it i believe a disk has to be at least =2E5 gig before windows will = use > fat32 Yes, I know that for Win95=2E But I also read somewhere that some newer versions can read Fat16 partitions, but can only create Fat32=2E Then I assume that whatever could be the size, it could be Fat32=2E=2E=2E But I may be wrong=2E=2E=2E Confirmation welcome=2E=2E=2E Jacques=2E ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 01:36:30 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: IBM's tiny Index card-sized computer has typical notebook power In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable Le Wed, 6 Feb 2002 18:26:51 +0100 Sidney Ho a =E9crit: > THE PORTABLE computing device, which IBM Research will unveil on Feb=2E 11= at > a technology conference in Phoenix, Ariz=2E, includes 128 megabytes of dyn= amic > random access memory, a 10-gigabit hard drive and a microprocessor that ru= ns > at 800 megahertz, or 800 million cycles per second=2E Interesting, but how long time to consume a 2xAA set of batteries ? Five minutes ? Jacques=2E ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 02:28:31 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Yahoo using Post? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Can Post or other hp mail clients collect yahoo mail or does one need to go through the advertising? Wasn't there some way to figure out a backdoor on occasion? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 18:51:26 -0800 Reply-To: Harry Mulcahey Sender: HPLX Mailing List From: Harry Mulcahey Subject: Sandisk CompactFlash 32MB MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0029_01C1AF3F.47901570" This is a multi-part message in MIME format. ------=_NextPart_000_0029_01C1AF3F.47901570 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, I just got a Sandisk 32MB card, and I tried it in my palmtop. IT = WONT WORK! um... sorry... It just gives me a "drive not ready" error = when I try to access it. Please help me. Goodbye. ------=_NextPart_000_0029_01C1AF3F.47901570 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hello, I just got a Sandisk 32MB card, = and I tried=20 it in my palmtop. IT WONT WORK! um... sorry... It just gives me a "drive = not=20 ready" error when I try to access it. Please help me.=20 Goodbye.
------=_NextPart_000_0029_01C1AF3F.47901570-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 12:44:59 +0900 Reply-To: Kazu Sender: HPLX Mailing List From: Kazu Subject: New batteries. MIME-Version: 1.0 Content-Type: Text/plain; charset=US-ASCII Hi all Frequently topics about batteries were disdussed on this list. I think there are many people in this list are interrested in batteries. T There are tree brand new batteries from Japan! Panasonic and Toshiba will launch new primary cells on March 2002. these two batteries are quite new kinds of primary cells. These cells basically uses Ni for positive electrode and Zn for negative electrode. Their output voltage are 1.5V! And these cells are 5 times bigger capasity than alkaline cell. Both makers said these cells are designed for high current use, for example digital cameras. And these cells are't good for lower current use. Prices are 220yen for Panasonic's ZR6D and 240yen for Toshiba's ZR6G. I think these are cheaper than Everready's Li Primary cell. Another battery is ordinary NiH secondary cell. Panasonc will launch new NiH secondary cell on April 2002. Capacity of this cell is 1900mAh. Price is 540yen. That's all. ------------------------------ Kyoto, JAPAN KAZU(Kazuhisa Tanabe) QWQ11433@nifty.ne.jp ------------------------------ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 06:13:53 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit >Daniel: >If you attach any drive to any port and for which you need a special >driver and >Steve: >I don't know of any stand alone serial CF readers. I am looking for a stand-alone CF reader which connects to the seral port. My PCMCIA port is occupied by the modem card, and the LX has no more room on C. I have a battery-charged Serial to Parallel converter. Would this convert the other way round? I have a parallel CF rader. Nathalie ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 07:30:54 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Eveready Lithiums Repackage? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Russel and Russel ;-) On Wed, 6 Feb 2002 23:17:55 +0000, Russel Brooks wrote: > Russell Hemery wrote: > > Question for the list. There was a 3.6V Lithium AA size as well. Does > > anyone know what 3.6V would do in the LX? Just wondering about 2x3.6V > > lithiums in parallel as a power source. > > Parallel? Don't know. Let us know after you've tried it and > whether you still have a working LX or not. :-) You could use one instead of two in parallel by mounting a conductive thing into one of the battery slots, for example a screw which has an appropriate battery-like length, and mount the battery in the other slot. But I don't know if the LX stands 3.6V main battery voltage, It would probably work, but the question is, how long... GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 07:30:56 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Sandisk CompactFlash 32MB MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hello > Hello, I just got a Sandisk 32MB card, and I tried it in my palmtop. IT WONT WORK! um... sorry... It just gives me a "drive not ready" error > when I try to access it. Please help me. Goodbye. If there is no important data on the card, insert it into the LX and use fdisk100 to prepare the card for usage in the LX. Then format it and it should work. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 07:30:57 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Ni Nathalie On Thu, 7 Feb 2002 06:13:53 +0100, Nathalie Bugeaud wrote: > I am looking for a stand-alone CF reader which connects to the seral port. > My PCMCIA port is occupied by the modem card, and the LX has no more room on > C. > I have never seen such a devide. Besides the palmtop itself. With Laplink or Interlink it could be used as a "serial compact flash drive". ;-) But a pretty expensive one! > I have a battery-charged Serial to Parallel converter. Would this convert > the other way round? I have a parallel CF rader. Probably not, because it cannot convert back parallel to serial. Only serial to parallel, and a CF reader needs bidirectional communication. You would need to build an interface using a microcontroller which is programmed for bidirectional serial <-> parallel converting. Such work has been done for example with the approach to build a 200LX interface for a parallel port ZIP drive. But this project has never been really finished. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 19:43:42 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Yahoo using Post? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Thu, 7 Feb 2002 19:34:17 +1300 (NZDT) 04h05m46s ago ... On Thu, 7 Feb 2002 02:28:31 +0000 (GMT), F. Kaufman wrote: > Can Post or other hp mail clients collect yahoo mail or > does one need to go through the advertising? Wasn't there > some way to figure out a backdoor on occasion? Fred, POST/LX goes straight thru the front door - eg with: İyahoo¨ POP=pop.mail.yahoo.com.au Login=aghutchins I get my aghutchins@yahoo.co.nz mail. POP=pop.mail.yahoo.com Login=FredKaufman Pass=seattle would get your mail ;-) I just have smtp=isp in case I want to send e-mail from yahoo.o - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 08:00:38 +0100 Reply-To: radek.svagr@LGPHILIPS-DISPLAYS.COM Sender: HPLX Mailing List From: Radek Svagr Subject: Re: Antivirus software for HP200LX. MIME-Version: 1.0 Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: quoted-printable I found somewhere DOS virus scan from Mcafee. It seems to be still supp= orted. There is a file called scan86.exe wchich works on any XT class c= omputer. Disadvantage of this program is that it can't use EMS so it is= really slow. If somebody needs a copy I can send it I have one from feb. 2001. Radek = =20 Erwann ABALEA = =20 cc: (bcc: Radek Svagr/H= RC/COMP/PHILIPS) =20 Sent by: HPLX Subject: Re: Antivirus = software for HP200LX. =20 Mailing List = =20 = =20 = =20 = =20 2002-02-06 06:01 = =20 PM = =20 Please respond = =20 to Erwann ABALEA = =20 = =20 = =20 On Wed, 6 Feb 2002, Feher Tamas wrote: > The only antivirus program I heard of, which still has a currently > maintaned 16-bit DOS version, is DialogueScience DrWeb. It is free fo= r > downloads from together with its virus-database add-on= s, Isn't there a DOS version of VirusScan from McAfee? Or maybe it's a 32b= it version... ? -- Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- Moi je trouve qu'il est debile de vouloir detruir kekel ke chose MG> Ta touche k est coinc=E9e ? -+- G in GNU : dans le kk jusqu'au cou -+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml = ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 08:08:54 +0100 Reply-To: radek.svagr@LGPHILIPS-DISPLAYS.COM Sender: HPLX Mailing List From: Radek Svagr Subject: Re: Commodore 64 & HP48 emulators MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Could be. But it is all in japanese. the link is: http://www.vector.co.jp/vpack/filearea/dos/util/machine/hp/calc/index.html Radek Svagr Barry To: HPLX-L@UConnVM.UConn.Edu Sent by: HPLX cc: (bcc: Radek Svagr/HRC/COMP/PHILIPS) Mailing List Subject: Re: Commodore 64 & HP48 emulators Classification: 2002-02-06 04:22 PM Please respond to Barry Radek Svagr wrote: > On a Vector site, there is a file HP48SX_UTL in a > directory CALCULATORS. I downloaded it but that > is all. There are some batch files which use another > program (VZ.?) Because I don't speak japanese I > don't know what is the purpose of this whole package What site is that? Do you think the 48 simulator I described might be there? Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 23:49:02 -0800 Reply-To: xy mox Sender: HPLX Mailing List From: xy mox Subject: Re: New batteries Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Genki, Kazu. how about Sony, i have saw some japan dc magazine, they already hv 2xxx mAh AA Ni-Mh for their dc/dv product. is that true? but 1900mAh is good enough for me. now, i'm still using 1600 sanyo HR3US. Thanks! Billy >Hi all > >Frequently topics about batteries were disdussed on >this list. I think there are many people in this list >are interrested in batteries. >There are tree brand new batteries from Japan! Panasonic and >Toshiba will launch new primary cells > on March 2002. >these two batteries are quite new kinds of primary >cells. These cells basically uses Ni for positive >electrode and Zn for negative electrode. >Their output voltage are 1.5V! And these cells are >5 times bigger capasity than alkaline cell. >Both makers said these cells are designed for high >current use, for example digital cameras. >And these cells are't good for lower current use. >Prices are 220yen for Panasonic's ZR6D and 240yen >for Toshiba's ZR6G. >I think these are cheaper than Everready's Li >Primary cell. Another battery is ordinary NiH secondary cell. >Panasonc will launch new NiH secondary cell on >April 2002. Capacity of this cell is 1900mAh. >Price is 540yen. That's all. ----------------------------- > >Kyoto, JAPAN >KAZU(Kazuhisa Tanabe) QWQ11433@nifty.ne.jp ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 6 Feb 2002 23:42:49 -0800 Reply-To: Harry Mulcahey Sender: HPLX Mailing List From: Harry Mulcahey Subject: I installed Win3.0 on my palmtop, but need a driver MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hello. I installed Win3.0 on my palmtop, but I need a NoMouse driver. I've seen one online, but the download site was offline. Please help. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 16:05:00 +0800 Reply-To: "R.S." Sender: HPLX Mailing List From: "R.S." Subject: pscalc95 MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 7bit I'd downloaded and tried this briefly, and it is good. But anyone knows: 1) How to adjust the screen to full screen size? 2) Is the address for registration still valid? Roger S. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 09:44:02 +0100 Reply-To: Dzon Sender: HPLX Mailing List From: Dzon Subject: Re: X-Finder .ZIP browsing In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII > Hey, I never noticed this! My setup does this too. I'm using X-Finder > R11.B14 and Pkunzip 2.04g. > > Are you also using Pkunzip? Searching the archives for this list leads me > to believe that instead using Unzip (from S.U.P.E.R.) may clear up this > problem. Unfortunately, S.U.P.E.R. is refusing connections right now, so I > can't test this. I am using InfoZip's Unzip. But after I sent the mail, I've found the notice in X-Finder's Users Guide: Archives with a directory structure is not supported. :-( Strange, I think İnot sure¨ that .lzh archives are without problems. Where can I find out info about X-Finder version? I've found it only in env file - ver. 10 İ?¨, I thought this is the last one. > BTW, are you using any of my X-Finder "themes" yet? 8-) :) ehm, well nope. I've selected icons and tuned Finder myself. -- -Dzon dzon@softhome.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 10:06:09 +0100 Reply-To: Feher Tamas Sender: HPLX Mailing List From: Feher Tamas Subject: Re: Antivirus for 200LX. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit Hello, >When you create a rescue disk, McAfee or Norton, the files >that are written to it are for DOS use, I see no reason why >this files can't be used with the 200LX Because these run with an "extender", that is they need 32-bit CPU, at least a 386SX. >I'm sure there is other DOS antivir soft availlable. Most DOS antivirus software run with extender today, due to the requirement to hold the virus signtures in memory, while scanning the hard disk. Sincerely: Tamas Feher. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 22:18:48 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: It's About Time ! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Thu, 7 Feb 2002 21:52:03 +1300 (NZDT) 12h42m02s ago ... On Wed, 6 Feb 2002 22:10:01 +0200, Daniel Hertrich wrote: > They probably need about 10 years. One single month cannot > be very effective to clean out bugs in MS software. But at > least they don'T produce crap in that month. ;-) I wouldn't bet on that. How are bugs fixed? By writing new code. Maybe their PR folk think bugs are removed by just deleting code. It must be a joke? Well, even if it isn't, it is. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 11:55:37 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: pscalc95 In-Reply-To: <003901c1afae$2a000820$e301a8c0@roger> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Thu, 7 Feb 2002, R.S. wrote: > I'd downloaded and tried this briefly, and it is good. I agree, it's a good start. > But anyone knows: > 1) How to adjust the screen to full screen size? Since is was designed with the HP95 in mind, I don't think expanding the screen could be done, except by the author himself. > 2) Is the address for registration still valid? Just do it. ;) Send us the results... -- Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- What we have here is a failure to communicate. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 12:09:42 +0100 Reply-To: =?iso-8859-1?q?I=F1aki=20Eseberri?= Sender: HPLX Mailing List From: =?iso-8859-1?q?I=F1aki=20Eseberri?= Subject: FLUFF MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Hi ... I'm a new spanish subscriber of this list, i would like to know if there are any app that can convert gdb files to msaccess or any other microsoft office product. Lot's of thanks. _______________________________________________________________ Do You Yahoo!? Yahoo! Messenger Comunicacisn instantanea gratis con tu gente. http://messenger.yahoo.es ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 12:24:18 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: FLUFF In-Reply-To: <20020207110942.32520.qmail@web14106.mail.yahoo.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable On Thu, 7 Feb 2002, I=F1aki Eseberri wrote: > I'm a new spanish subscriber of this list, i would > like to know if there are any app that can convert gdb > files to msaccess or any other microsoft office > product. Sure, you can convert GDB files to CSV format, and import these CSV files into virtually any database. Just look at "www.palmtop.net/super.html". --=20 Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- SP> Ah d=E9sol=E9, mais alors l=E0 Tristant il a bu le filtre Non, le philtre. C'est pas pareil. Je te renvoie =E0 fr.sci.filo pour que tu con=E7oives la diph=E9rence. -+- TP in Guide du neuneu sur Usenet - C'est phou, non ? -+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 13:46:14 +0100 Reply-To: radek.svagr@LGPHILIPS-DISPLAYS.COM Sender: HPLX Mailing List From: Radek Svagr Subject: Morphy one. was Re: 95lx? MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii What is this beautiful thing? Is there any info in english? Will it be available for market? Radek Daniel Hertrich cc: (bcc: Radek Svagr/HRC/COMP/PHILIPS) Sent by: HPLX Subject: Re: 95lx? Mailing List 2002-02-06 05:19 PM Please respond to Daniel Hertrich Hi Damond On Wed, 6 Feb 2002 10:57:00 -0500, Damond Walker wrote: > I'm beginning to think I shouldn't of called my 95 a toy. :) Good thought. ;-) > Has anyone here put any thought into designing a "modern" DOS based > handheld? I wouldn't thing that it would be all that hard to do -- a > prototype would be ugly I'm sure. But I think it would be a cool thing to > hack on. > > I've always loved the idea of "instant on" -- grab a low-power 386/486, give > it 16megs to 36megs, load FreeDOS and start from there. So you know MorphyOne? http://www.morphyplanning.co.jp BTW: There are (new?) pictures of a MorphyOne which boots Linux and DOS at http://www.morphyplanning.co.jp/Products/MorphyOne/index.htm#20020121 Very interesting pictures, and now that I write the link, I guess the photos are from 21st JAN 2002... ;-) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 08:39:06 -0500 Reply-To: stan.hplx@VERIZON.NET Sender: HPLX Mailing List From: Stanley Dobrowski Subject: Re: Are you happy with your DS mod? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit I installed my first Double Speed crystal at the NJ/NY area HP Palmtop User Group meeting in New York City on January 14th, 1995. I was given the crystal and the instructions (in Japanese, but with lots of pictures) from a member of the Japanese User Group that pionered the DS upgrades. In all these years since, I have never run across anything (hardware or software) that was incompatable with the DS upgrade. There is at least one thing that I know if that is incompaptable, though. It is a network card, I think, and the problem is with it's poorly written driver. The driver must use a software timing loop written for the original speed of the processor and therefore does not work at double speed. Since the processor runs faster with the DS crystal, there is an increase in power consumption and a sortening of the battery life. But I have not found this to be a problem. Other than that, the DS upgrade makes the palmtop run faster and is well worth it, IMHO. Stan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 08:39:08 -0500 Reply-To: stan.hplx@VERIZON.NET Sender: HPLX Mailing List From: Stanley Dobrowski Subject: Re: Internet with 200lx at NYC MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Bulent Bicioglu wrote: > I would like to hear from 200lx users at NYC about: > Which service provider, cellular phone, software...are > used? I use CompuServe Classic as my ISP for the palmtop. I use a Motorola 7868 StacTAC cel phone with Verison. I have the data cable for the phone that I can plug into the palmtop' serial port to go online with CompuServe from anywhere. This combination is what I have been waiting for for a long time. The "modem" is built into the phone, so I don't need any power-hungry PCMCIA or external modem. I use WWW/LX from D&A SOftware for my Intenet Email. Stan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 07:53:38 -0700 Reply-To: "Feldman, Robert" Sender: HPLX Mailing List From: "Feldman, Robert" Subject: Re: Morphy one. was Re: 95lx? Comments: To: "radek.svagr@LGPHILIPS-DISPLAYS.COM" MIME-Version: 1.0 Content-Type: text/plain There are no plans to market the Morphy One outside of Japan. Even there, it seems doubtful that it will ever come to market. You can get info in English at http://www.morphyone.org/index_e.shtml, but the info here was last updated in June of 2001. Bob -----Original Message----- From: Radek Svagr İmailto:radek.svagr@LGPHILIPS-DISPLAYS.COM¨ Sent: Thursday, February 07, 2002 6:46 AM To: HPLX-L@UCONNVM.UCONN.EDU Subject: Morphy one. was Re: 95lx? What is this beautiful thing? Is there any info in english? Will it be available for market? Radek ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 10:07:54 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: Yahoo using Post? Comments: To: fjkaufman@WORLDNET.ATT.NET In-Reply-To: <20020207022831.KUTO2661.mtiwmhc22.worldnet.att.net@worldnet.att.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Yahoo allows pop mail boxes they just require that you be spammed by them a bit but it's realy very little (hardly any) spamming on their part. I think it's the best email out there with 6MB of space avilable. I use it with POST extensively and it works well for sending and receiving mail. BTW: another nice alternative if you dial in and all you use is mail is www.palmtop.com. THey support the built-in Lotus CC: mail. > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On > Behalf Of F. > Kaufman > Sent: Wednesday, February 06, 2002 9:29 PM > To: HPLX-L@uconnvm.uconn.edu > Subject: Yahoo using Post? > > > Can Post or other hp mail clients collect yahoo mail or > does one need to go through the advertising? Wasn't there > some way to figure out a backdoor on occasion? > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 16:10:51 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: CF card reader into serial port In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable Le Thu, 7 Feb 2002 07:30:57 +0200 Daniel Hertrich a =E9crit: > You would need to build an interface using a microcontroller which is > programmed for bidirectional serial <-> parallel converting.=20 =2E..And after that, you have to write a driver to recognize the reader as a new disk drive... Jacques. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 16:10:55 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: pscalc95 In-Reply-To: <003901c1afae$2a000820$e301a8c0@roger> MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: quoted-printable Le Thu, 7 Feb 2002 16:05:00 +0800 "R=2ES=2E" a =E9crit: > I'd downloaded and tried this briefly, and it is good=2E > But anyone knows: > 1) How to adjust the screen to full screen size? İfn¨İZoom¨ is your only friend=2E=2E=2E Jacques=2E ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 10:27:32 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: CF card reader into serial port Comments: To: Nathalie Bugeaud In-Reply-To: <006401c1af98$187512a0$7fe8f8c1@oemcomputer> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Have you considered using a small external battery powered pocket modem? I have used one from Motorolla and one from Zoom and they work well. They take a 9 volt battery and give 14.4 baud speed. I get it to work with the HPLX serial cable, a 9-pin gender changer, a 9-pin null modem converter and a standard modem cable. This sounds like something that could work for you because, instead of externalising the flash card, you externalize the modem. > I am looking for a stand-alone CF reader which connects to > the seral port. > My PCMCIA port is occupied by the modem card, and the LX > has no more room on > C. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 10:34:52 -0500 Reply-To: Bob Penick Sender: HPLX Mailing List From: Bob Penick Subject: Re: CF card reader into serial port Comments: To: Daniel Hertrich MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit ----- Original Message ----- From: "Daniel Hertrich" Sent: Thursday, February 07, 2002 12:30 AM Subject: Re: CF card reader into serial port > Such work > has been done for example with the approach to build a 200LX interface > for a parallel port ZIP drive. But this project has never been really > finished. > Daniel, I have one of the Trans Digital parallel port PC cards that Thaddeus sells and it work wonderfully with a 100 Zip drive. I doubt that you could get it to read an external parallel CF reader though. That wouldn't help Nathalie even if you could of course. Maybe she should get an external modem and use the built in PCMCIA slot for her memory? How about it Nathalie? I'm sure you want to throw away what you already have and buy new stuff. Or, if you (Nathalie) want to pay just the postage, I'll give you a USRobotics 24/96 Worldport pocket modem that is brand new and comes with the European 220 volt ac adapter. Email isn't TOO bad at 2400 baud. (Probably could pick up something similar in France for less than the postage from the US though.) Later, bob ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 08:39:08 -0700 Reply-To: "Feldman, Robert" Sender: HPLX Mailing List From: "Feldman, Robert" Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" I've seen converters that are switch-selectable as either serial-to-parallel or parallel-to-serial, but I do not know of ones that are truly bi-directional. Also, there are lots of converters that will allow you to hook a serial device to a computer's USB port, but I have not seen any that allow you to hook a USB device to an RS-232 serial port. :( Bob -----Original Message----- From: Nathalie Bugeaud İmailto:tps-seti@WANADOO.FR¨ Sent: Wednesday, February 06, 2002 11:14 PM To: HPLX-L@UCONNVM.UCONN.EDU Subject: Re: CF card reader into serial port I have a battery-charged Serial to Parallel converter. Would this convert the other way round? I have a parallel CF rader. Nathalie ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 09:10:55 -0700 Reply-To: Bob Christopher Sender: HPLX Mailing List From: Bob Christopher Subject: Re: CF Reader To Serial Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit The other day I was looking at PCMDIA to USB converter cards. There are several out there, the most useful/optimistic one made by Orange Technologies. This was a PCMCIA card (type II) with 4 USB ports on the end. Said to create USB ports via the PCMCIA slot on systems with or without USB support. I also looked into reverse-port technologies. I found USB to serial but nothing the other way around. Can't be done, I was told. I'd suggest contacting Orange Tech and see what they say since they have created a rather intriguing device. Bob Bob Christopher . Littleton, Colorado USA . bob@palmtop.com HP 200-LX Palmtop . Minox Cameras . All The Small Stuff ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 13:17:06 -0300 Reply-To: "Eduardo Moreno A." Sender: HPLX Mailing List From: "Eduardo Moreno A." Subject: Modem in Mobile <-> HP problem MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Hi. I'm trying to connect my Samsung SPH-175 PCS phone with my HP, for use the modem in the cellphone. But, i can't use the modem, even in the "Datacomm", when i write "AT" the modem return me this keys but don't return the "OK" message, and then, the modem lock. Any solution? any test that i can do? In Daniel's pages, i read that the voltage of the HP is low, can be this the problem? how i can test this? thanks. -- =====__ |İ__¨|_\_==_ Eduardo Moreno Araya | 26 | 05 | emoreno@dim.uchile.cl (@)-----(@)... . -- .--. . .-. ..-. ..*\:{> PGP? : finger emoreno@dim.uchile.cl ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 09:21:17 -0700 Reply-To: Michael Kopplin Sender: HPLX Mailing List From: Michael Kopplin Subject: Re: CF Reader To Serial In-Reply-To: <200202071610.g17GA3713604@ez0.ezlink.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Thu, 7 Feb 2002, Bob Christopher wrote: > The other day I was looking at PCMDIA to USB converter cards. > There are several out there, the most useful/optimistic one > made by Orange Technologies. This was a PCMCIA card (type II) > with 4 USB ports on the end. Said to create USB ports via the > PCMCIA slot on systems with or without USB support. If you look closer, you'll probably find it's a cardbus card. Won't work on the palmtop. Mike ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 09:24:21 -0700 Reply-To: "Feldman, Robert" Sender: HPLX Mailing List From: "Feldman, Robert" Subject: Re: CF Reader To Serial MIME-Version: 1.0 Content-Type: text/plain And the software needed for USB support was not available before Windows95b. -----Original Message----- From: Michael Kopplin İmailto:kopplin@TECHNOIR.NU¨ Sent: Thursday, February 07, 2002 10:21 AM To: HPLX-L@UCONNVM.UCONN.EDU Subject: Re: CF Reader To Serial On Thu, 7 Feb 2002, Bob Christopher wrote: > The other day I was looking at PCMDIA to USB converter cards. > There are several out there, the most useful/optimistic one > made by Orange Technologies. This was a PCMCIA card (type II) > with 4 USB ports on the end. Said to create USB ports via the > PCMCIA slot on systems with or without USB support. If you look closer, you'll probably find it's a cardbus card. Won't work on the palmtop. Mike ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 10:51:11 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: It's About Time ! MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Ed Padin wrote: > I think what they need to do is form a wholly separate division > charged with code correction and reporting directly to the board of > directors of the company. Kinda like a federal prosecutor. It should If Microsoft removed all the bugs what would they have left to sell? Linux? Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 12:12:28 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: CF card reader into serial port In-Reply-To: <00c801c1afec$fe0de270$ae2d010a@penickrh40w> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > Or, if you (Nathalie) want to pay just the postage, I'll give you a > USRobotics 24/96 Worldport pocket modem that is brand new > and comes with the > European 220 volt ac adapter. Email isn't TOO bad at 2400 > baud. (Probably > could pick up something similar in France for less than the > postage from the > US though.) BTW: I have a hayes 2400 baud modem that gets its power from the serial port. no batteries or pwoer adapter needed. I bought it on ebay but never used it much except to test on the LX. It seemed to work at the time. I'm not sure where it is now... somewhere in the closet, probably. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 12:12:27 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: Modem in Mobile <-> HP problem Comments: To: "Eduardo Moreno A." In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit I have a startac cell phone that works with the LX. The weird thing is that I cannot get it to return result codes like the 'OK'. I can get it to return the 'connect' message after dialing and connecting. I have to adjust my www/lx dialing scripts to not look for the 'OK'. > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@UConnVM.UConn.Edu¨On > Behalf Of > Eduardo Moreno A. > Sent: Thursday, February 07, 2002 11:17 AM > To: HPLX-L@UConnVM.UConn.Edu > Subject: Modem in Mobile <-> HP problem > > > Hi. > > I'm trying to connect my Samsung SPH-175 PCS phone with my > HP, for use the > modem in the cellphone. > > But, i can't use the modem, even in the "Datacomm", when i > write "AT" the > modem return me this keys but don't return the "OK" > message, and then, the > modem lock. > > Any solution? any test that i can do? > > In Daniel's pages, i read that the voltage of the HP is > low, can be this > the problem? how i can test this? > > > thanks. > > > -- > =====__ > |İ__¨|_\_==_ Eduardo Moreno Araya > | 26 | 05 | emoreno@dim.uchile.cl > (@)-----(@)... . -- .--. . .-. ..-. ..*\:{> > > PGP? : finger emoreno@dim.uchile.cl > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 19:39:45 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: Palm database->Hp 200lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Barry wrote: > Ebooks are stored in pdb files. This is true for the format > most ebooks are in, the doc format. They have a pdb extension. There is at least one converter to create Palm documents from plain ASCII: ftp://ftp.fh-mannheim.de/pub/software/pilot/makedoc7.zip The nice thing about this 30KB converter is, that it runs on the HP and also converts back from Palm DOC into ASCII. I just tried it on freeware ebooks with PDB or PRC extension. It gave me plain ASCII text! And it runs fast. However the conversion from ASCII into standard Palm document format is painful slow. Daniel, I think MAKEDOC7 is a candidate for SUPER. Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 14:06:24 -0500 Reply-To: Glen Bergs Sender: HPLX Mailing List From: Glen Bergs Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit What about using using a digital camera like a Kodak DC 200. It has a serial port and CF reader. If you plug this into Win ME or XP it thinks its a hard drive and you can move files on and off it. You would need a driver for DOS and boy would it be Slooooow but I think it could work. Glen ----- Original Message ----- From: "Bob Penick" To: Sent: Thursday, February 07, 2002 10:34 AM Subject: Re: CF card reader into serial port > ----- Original Message ----- > From: "Daniel Hertrich" > Sent: Thursday, February 07, 2002 12:30 AM > Subject: Re: CF card reader into serial port > > > > Such work > > has been done for example with the approach to build a 200LX interface > > for a parallel port ZIP drive. But this project has never been really > > finished. > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 14:37:17 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Yahoo using Post? Comments: To: fjkaufman@WORLDNET.ATT.NET MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hi Fred, > Can Post or other hp mail clients collect yahoo mail or does > one need to go through the advertising? Wasn't there some way > to figure out a backdoor on occasion? Sounds like you are talking about the Yahoo screens, implying Web access, but then you mention Post. You canNOT access Yahoo mail using HV via Web, because of Javascript. But you CAN access your email via Post/LX. My account here is a Yahoo account. 1. Login to the Yahoo account and click options, then set up the account so you have POP access (ignore the other option where you set up mailboxes that YAHOO will access for you.) This means that you will receive Yahoo's junkmail. I asked for minimal juskmail (1 per week) and it shows up at an even lesser frequency. (You can minimize frequency by making yourself a less attractive marketing target by, e.g. don't say you are a judge earning $100,000 but instead a 100 year old Albanian living on $14,000. (I have nothing against Albanians, please forgive. I am just reflecting what the marketeers and advertizers will find a more palatable person to send ads to. Certainly express NO INTEREST in any of the topics they suggest!) Once this is done they will tell you that the POP- server is pop.mail.yahoo.com and SMTP server is smtp.mail.yahoo.com (for US-based accounts). 2. In POST.CFG: İhplxmail¨ Alias=3DHPLXMAIL <--- whatever you want to see on the screen APOP=3D0 Del=3D0 Dir=3Dc:\mail\ <---- whereever it actually is located Login=3Dhplxmail Pass=3D POP=3Dpop.mail.yahoo.com POPFirst=3D1 Sep=3D1 SMTP=3Dsmtp.mail.yahoo.com Template=3Dc:\mail\hplxmail.tpl Timeout=3D180 VolatilePOP=3D0 Make a template file like this: ---------- From: hplxmail@yahoo.com To: hplx-l@uconnvm.uconn.edu Subject: ---------- And you are set. CAVEAT: Lately, I notice that their POP3 is SLOW. That means it times out even at 3 minutes. If you have 60 messages and the connection times out at the 59th, the next run, it will try to download all the old 60 plus whatever is new. You will have 59 duplicate messages on the palmtop. This is because their server does not delete the messages when the command to do so arrives, i.e. right after the message is downloaded. Instead, they "collect" the delete messages, and when the session is done, they run the deletes. When the session abort for time out, you do not get the deletions. You will note that the 4th line in the CFG excerpt says: Del=3D0 Meaning, DO NOT delete the messages after downloading them! I.e. Post/LX keeps track of the messages it already downloaded, and will NOT download them again. The tracking is done by recording the message numbers in file HPLXMAIL.OLD (in my case). You can occasionally copy HPLXMAIL.OLD to HPLXMAIL.DEL and run again. All the messages that were downloaded successfully, will now be deleted on the server. Post/LX will also synch the .OLD file. Hope this is clear and helpful. Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 14:56:21 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Re: Pscalc95 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Here is the solution for screen size and color. First get HPZOOM from SUPER and then create a batch file like this: ----begin ps.bat---- @echo off mode bw80 hpzoom 3 pscalc95 hpzoom 1 mode co80 cls ----end ps.bat---- modify to add directories, etc. Dario -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Win a ski trip! http://www.nowcode.com/register.asp?affiliate=1net2phone3a ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 14:58:08 -0500 Reply-To: Ed Padin Sender: HPLX Mailing List From: Ed Padin Subject: Re: Modem in Mobile <-> HP problem Comments: To: Siegfried Witzgall In-Reply-To: <3C62BA23.51881DA2@oninet.pt> MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit My startac is the ST7868W. I got the serial cable from an Ebay auction. I hook it up to my LX using the LX serial cable--> 9-pin gender changer--> 9 pin null modem converter--> startac serial cable. If I go into datacom, I an issue AT commands but it will not send me any information (result codes), however I can issue a dial command and connect to a remote machine with no problems. I haven't used it a lot as I have cheap internet access through my LAN at work and don't need wireless access much. The few times I tried it I was able to dial into a UUnet account and get my mail. Are you using www/lx? if so, I can tell you the changes I made in the dialout script. BTW: echoed this message to the list so that others may benefit > -----Original Message----- > From: Siegfried Witzgall İmailto:ziggysan@oninet.pt¨ > Sent: Thursday, February 07, 2002 12:32 PM > To: Ed Padin > Subject: Re: Modem in Mobile <-> HP problem > > > Hi Ed, > Can you please tell me all the fine details about the > Startac ( is it the > 130?) HP200 > LX connection. > I have the followup of the Startac 130 the V3688 and it has the same > Software and the > same Connector, so i may give it a try if you provide me > with how and > what. > Thanks > Ziggy > > Ed Padin wrote: > > > I have a startac cell phone that works with the LX. The > weird thing is > > that I cannot get it to return result codes like the > 'OK'. I can get > > it to return the 'connect' message after dialing and connecting. I > > have to adjust my www/lx dialing scripts to not look for the 'OK'. > > > > > -----Original Message----- > > > From: HPLX Mailing List İmailto:HPLX-L@UConnVM.UConn.Edu¨On > > > Behalf Of > > > Eduardo Moreno A. > > > Sent: Thursday, February 07, 2002 11:17 AM > > > To: HPLX-L@UConnVM.UConn.Edu > > > Subject: Modem in Mobile <-> HP problem > > > > > > > > > Hi. > > > > > > I'm trying to connect my Samsung SPH-175 PCS phone with my > > > HP, for use the > > > modem in the cellphone. > > > > > > But, i can't use the modem, even in the "Datacomm", when i > > > write "AT" the > > > modem return me this keys but don't return the "OK" > > > message, and then, the > > > modem lock. > > > > > > Any solution? any test that i can do? > > > > > > In Daniel's pages, i read that the voltage of the HP is > > > low, can be this > > > the problem? how i can test this? > > > > > > > > > thanks. > > > > > > > > > -- > > > =====__ > > > |İ__¨|_\_==_ Eduardo Moreno Araya > > > | 26 | 05 | emoreno@dim.uchile.cl > > > (@)-----(@)... . -- .--. . .-. ..-. ..*\:{> > > > > > > PGP? : finger emoreno@dim.uchile.cl > > > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 15:24:19 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Minnesotans MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable I know of some Palmtoppers who are Minnesotans. Soon I will be one of you. Yes, I am moving to Minnesota (Eagan) soon. So who are you? Is there any group organized that meets occasionally to exchange views, notes, tips and stories? Let me know in private email or post here... All the best. Avi Meshar _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 17:30:42 -0300 Reply-To: "Eduardo Moreno A." Sender: HPLX Mailing List From: "Eduardo Moreno A." Subject: Re: Modem in Mobile <-> HP problem Comments: To: Ed Padin In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII But, in the PC, the response is "OK", and in the HP there ois not answer. Yes, i'm using WWW/LX and Going Postal.. On Thu, 7 Feb 2002, Ed Padin wrote: > My startac is the ST7868W. I got the serial cable from an Ebay > auction. I hook it up to my LX using the LX serial cable--> 9-pin > gender changer--> 9 pin null modem converter--> startac serial cable. > > If I go into datacom, I an issue AT commands but it will not send me > any information (result codes), however I can issue a dial command and > connect to a remote machine with no problems. > > I haven't used it a lot as I have cheap internet access through my LAN > at work and don't need wireless access much. The few times I tried it > I was able to dial into a UUnet account and get my mail. > > > Are you using www/lx? if so, I can tell you the changes I made in the > dialout script. > > > BTW: echoed this message to the list so that others may benefit > > > > -----Original Message----- > > From: Siegfried Witzgall İmailto:ziggysan@oninet.pt¨ > > Sent: Thursday, February 07, 2002 12:32 PM > > To: Ed Padin > > Subject: Re: Modem in Mobile <-> HP problem > > > > > > Hi Ed, > > Can you please tell me all the fine details about the > > Startac ( is it the > > 130?) HP200 > > LX connection. > > I have the followup of the Startac 130 the V3688 and it has the same > > Software and the > > same Connector, so i may give it a try if you provide me > > with how and > > what. > > Thanks > > Ziggy > > > > Ed Padin wrote: > > > > > I have a startac cell phone that works with the LX. The > > weird thing is > > > that I cannot get it to return result codes like the > > 'OK'. I can get > > > it to return the 'connect' message after dialing and connecting. I > > > have to adjust my www/lx dialing scripts to not look for the 'OK'. > > > > > > > -----Original Message----- > > > > From: HPLX Mailing List İmailto:HPLX-L@UConnVM.UConn.Edu¨On > > > > Behalf Of > > > > Eduardo Moreno A. > > > > Sent: Thursday, February 07, 2002 11:17 AM > > > > To: HPLX-L@UConnVM.UConn.Edu > > > > Subject: Modem in Mobile <-> HP problem > > > > > > > > > > > > Hi. > > > > > > > > I'm trying to connect my Samsung SPH-175 PCS phone with my > > > > HP, for use the > > > > modem in the cellphone. > > > > > > > > But, i can't use the modem, even in the "Datacomm", when i > > > > write "AT" the > > > > modem return me this keys but don't return the "OK" > > > > message, and then, the > > > > modem lock. > > > > > > > > Any solution? any test that i can do? > > > > > > > > In Daniel's pages, i read that the voltage of the HP is > > > > low, can be this > > > > the problem? how i can test this? > > > > > > > > > > > > thanks. > > > > > > > > > > > > -- > > > > =====__ > > > > |İ__¨|_\_==_ Eduardo Moreno Araya > > > > | 26 | 05 | emoreno@dim.uchile.cl > > > > (@)-----(@)... . -- .--. . .-. ..-. ..*\:{> > > > > > > > > PGP? : finger emoreno@dim.uchile.cl > > > > > > > > ** HPLX-L LIST Info at > http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > > > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > -- =====__ |İ__¨|_\_==_ Eduardo Moreno Araya | 26 | 05 | emoreno@dim.uchile.cl (@)-----(@)... . -- .--. . .-. ..-. ..*\:{> PGP? : finger emoreno@dim.uchile.cl ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 21:31:40 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Hinge break prevention MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0011_01C1B01E.D4F332A0" This is a multi-part message in MIME format. ------=_NextPart_000_0011_01C1B01E.D4F332A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Scrutinizing my leftover batch of hinge-broken LX's , I found one reason = a hinge break might occur:=20 If the lower right Torx6 screw of the screen is loose, the hinge bends = slightly more easily . Hence: one a year - lift the lower right of the glue-on strip of the = screen, and tighten the lower right screw. Of course, tigtening all four = might be even better ;-) Michel ------=_NextPart_000_0011_01C1B01E.D4F332A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Scrutinizing my leftover batch of = hinge-broken LX's=20 , I found one reason a hinge break might occur:
 
If the lower right Torx6 screw of the = screen is=20 loose, the hinge bends slightly more easily .
 
Hence: one a year - lift the = lower right of=20 the glue-on strip of the screen, and tighten the lower right screw. Of = course,=20 tigtening all four might be even better ;-)
 
 
Michel
------=_NextPart_000_0011_01C1B01E.D4F332A0-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 14:56:49 -0600 Reply-To: Theodore Heise Sender: HPLX Mailing List From: Theodore Heise Subject: Re: Modem in Mobile <-> HP problem In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Thu, 7 Feb 2002, Eduardo Moreno A. wrote: > But, in the PC, the response is "OK", and in the HP there ois not answer. > > Yes, i'm using WWW/LX and Going Postal.. You might try Datacomm, the built-in terminal emulator. When I hook up my ST7868W <--> Moto serial cable <--> HP6181-6639 <--> HP serial cable <--> HP200LX, I get responses from AT commands to the phone. The Datacomm has to be pointed at com1, and DOS power needs to be on for the port. -- Ted Heise West Lafayette, IN, USA ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 22:03:40 +0100 Reply-To: "Oliver W. Leibenguth" Sender: HPLX Mailing List From: "Oliver W. Leibenguth" Organization: www.Compuseum.de Subject: 200lx vs. 700lx MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi, after playing with my newly aquired Omnigo700lx I discovered another difference: The problems with electromagnetic interference you might encounter with a 200lx İ1¨ are eliminated on the 700lx. I've installed Ring.com İ2¨ and called the attached Nokia 2110. Ring.com didn't detect any disturbances at all. So the EMI-shielding in the 700lx must be a lot better than in the 200lx (I did not open the 700lx yet to verify this but it sounds reasonable for a palmtop with a GSM-phone attached to the top *g) regards, Oliver İ1¨ as described here: http://www.daniel-hertrich.de/emi/index.shtml İ2¨ available here: http://home.t-online.de/home/stefan.peichl/ring.zip ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 16:19:01 -0500 Reply-To: "Striegel, Alan" Sender: HPLX Mailing List From: "Striegel, Alan" Subject: Re: Morphy one. was Re: 95lx? MIME-Version: 1.0 Content-Type: text/plain Whenever I encounter a web page in some language I cannot read, I paste its URL into the WorldLingo translator to make at least some attempt. http://www.worldlingo.com/wl/Translate You may glean some information from the pages there through this machine translator. It will be very rough, but you can get enough sometimes. I gathered from my reading there that they have been taking reservations for production in order to gauge the potential sales. With enough reserved units spoken for, they can hit production. They seemed to be saying they had 850 reserved for the first run, were expecting another 600 to be enough to make a second run. Alan Striegel >From: Radek Svagr İmailto:radek.svagr@LGPHILIPS-DISPLAYS.COM¨ >Sent: Thursday, February 07, 2002 7:46 AM > >What is this beautiful thing? Is there any info in english? Will it be available for market? >... > >>http://www.morphyplanning.co.jp ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 16:44:57 -0500 Reply-To: "Striegel, Alan" Sender: HPLX Mailing List From: "Striegel, Alan" Subject: Re: Commodore 64 & HP48 emulators MIME-Version: 1.0 Content-Type: text/plain I gathered the impression that this software is not an emulator, but an aid to programming for the HP 48SX. See the machine-translated text below: "Compilation support system for Hpc48sx program portable calculator : Being something which spontaneous the work is formed with the purpose which the using selfishness at the time of program editing of the program portable calculator Hpc48sx of the Yokogawa * Hewlett * Packard corporation is improved, I, being something which presently you have used, it does this system. Therefore, completely bug it is not something which is taken, it is not something of the character which in the future is not modified. It seems that is the development kit in the one for IBMPC, but you do not know those of the PC9801. If it is, you think we would like to purchase. Function being abundant, because exchanging the personal computer and the data is possible, it purchased the 48SX,, but using, that you feel it forgets thing and the program description format where the cursor response when compiling is slow (my private problem?) It is thing. Developing suitably by the fact that the shift key is used, it is key-in being to be lightened,, but it meaning that the indicatory territory is narrow the prospect of the whole program is not good. Then, being something where it will do compilation job on the PC98, will transfer that, to the 48SX and will execute it does. Macro of the Vz editor is used to compilation. This time, the fact that it is troubled is the difference of code of the PC98 and the 48SX. Then, if it draws up the special cord/code of the 48SX with external character, in when compiling using that external character easy, to read to the cord/code for the 48SX when transferring and and comment in the source, it indicates and makes, converts there is, deleting that, it transfers to the 48SX. In addition, for key-in reduction the command several is developed when compiling on the PC98. Development, for example, when the CASE it inputs, CASE '_' THEN E END The END and, it is outputted. The _ shows the position of cursor, several small letters (E and the like) which are developed mean the fact that suitable processing system and the like is inputted into that position. " Alan Striegel >From: Radek Svagr İmailto:radek.svagr@LGPHILIPS-DISPLAYS.COM¨ >Sent: Thursday, February 07, 2002 2:09 AM > >Could be. But it is all in japanese. > >the link is: http://www.vector.co.jp/vpack/filearea/dos/util/machine/hp/calc/index.html ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 16:15:12 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: pscalc95 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit R.S. wrote: > I'd downloaded and tried this briefly, and it is good. > But anyone knows: > 1) How to adjust the screen to full screen size? > 2) Is the address for registration still valid? I tried sending an email to the CIS address shown but I wasn't able to make outlook express accept an address with a comma. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 17:07:19 -0500 Reply-To: Bruce_Martin@MANULIFE.COM Sender: HPLX Mailing List From: Bruce Martin Subject: Re: X-Finder .ZIP browsing MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii > I am using InfoZip's Unzip. But after I sent the mail, I've found the > notice in X-Finder's Users Guide: Archives with a directory structure is > not supported. :-( Strange, I think İnot sure¨ that .lzh archives are > without problems. Where can I find out info about X-Finder version? I've > found it only in env file - ver. 10 İ?¨, I thought this is the last one. > The Unzip on SUPER is the InfoZip one. Strange that X-Finder + Unzip doesn't seem to "look" more than one directory level deep into .ZIPs. (X-Finder + Lha/Lhe seems okay with .LZHs.) Does any XF guru have a fix for this? To check your version of X-Finder, look at the copyright notice near the bottom left of the screen when starting up. The latest "official" release is R.10, available on SUPER. The latest "beta" release with English documentation is R.11B13, available from Toshiki Sasabe's page here: http://www.ne.jp/asahi/alpha/beta/xf/index.htm The latest "beta" release, still with Japanese docs only, is R.11B14, available from the author, Gaku Nakagawa, here: http://www.estyle.ne.jp/gaku I used R.11B13 for several months without problems. Read the docs for this and all the previous betas, if you're considering moving up. For your trouble, you get increased stability; infrared support for XFS; support for custom desktop wallpaper, full window, active window and inactive window frames; support for custom cursors and more. I'm now using R.11B14 which, according to Babelfish, introduced some improvements to the Trash function. >> BTW, are you using any of my X-Finder "themes" yet? 8-) > > :) ehm, well nope. I've selected icons and tuned Finder myself. > Ah well. You might also want to have a look at the icons available from SUPER Icon server at: http://www.palmtop.net/cgi-bin/supericons Bruce in Toronto ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 00:36:23 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: pscalc95 In-Reply-To: <007201c1b024$e9fa70e0$7bfe36d8@oemcomputer> MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Le Thu, 7 Feb 2002 16:15:12 -0600 Barry a =E9crit: > I tried sending an email to the CIS address shown but I wasn't > able to make outlook express accept an address with a comma. Barry, remember that you must replace the CIS ID's comma by a dot, when you want to send a message to a CIS user by internet... ;-) Jacques (100337.1703 @ compuserve.com).=20 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 09:11:36 +0800 Reply-To: "R.S." Sender: HPLX Mailing List From: "R.S." Subject: Re: Pscalc95 Comments: To: Dario Draiman MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 7bit Thanks. This work very well. Roger ----- Original Message ----- From: "Dario Draiman" To: Sent: Friday, February 08, 2002 3:56 AM Subject: Re: Pscalc95 > Here is the solution for screen size and color. First get HPZOOM from SUPER and then create a batch file like this: > > ----begin ps.bat---- > @echo off > mode bw80 > hpzoom 3 > pscalc95 > hpzoom 1 > mode co80 > cls > ----end ps.bat---- > > modify to add directories, etc. > > Dario > > -- > > _______________________________________________ > Sign-up for your own FREE Personalized E-mail at Mail.com > http://www.mail.com/?sr=signup > > Win a ski trip! > http://www.nowcode.com/register.asp?affiliate=1net2phone3a > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 7 Feb 2002 21:35:52 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: SUPER question Comments: To: Daniel Hertrich MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Daniel, Anything left for us forum helpers to do for SUPER? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 05:21:32 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: Yahoo using Post? Comments: To: Tony Hutchins MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > > Can Post or other hp mail clients collect yahoo mail or > > does one need to go through the advertising? Wasn't there > > some way to figure out a backdoor on occasion? > > Fred, POST/LX goes straight thru the front door - eg with: Hmmmmmm. I will have to try again? Oh, maybe it has to be the primary log-on? Not subordinate to AT&T for instance??? Or maybe I set something wrong (G) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 19:13:55 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Yahoo using Post? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Fri, 8 Feb 2002 18:55:11 +1300 (NZDT) 33m39s ago ... On Fri, 8 Feb 2002 05:21:32 +0000 (GMT), F. Kaufman wrote: > > Fred, POST/LX goes straight thru the front door - eg with: > > Hmmmmmm. I will have to try again? Oh, maybe it has to be > the primary log-on? Not subordinate to AT&T for instance??? You can dial up through any ISP. Essentially all you need is a yahoo E-mail POST/LX box with POP=.., Login=.., & Pass=.., marked for visit, and your yahoo mail should come in. See Avi's excellent post for more details. > Or maybe I set something wrong (G) I can't tell from here. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 07:18:27 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: It's About Time ! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Barry On Thu, 7 Feb 2002 10:51:11 -0600, Barry wrote: > If Microsoft removed all the bugs what would they have left to > sell? Linux? They would probably have to sell DOS again. Dos is what remains if you strip almost all bugs from Windows. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 09:05:53 +0100 Reply-To: =?iso-8859-1?q?I=F1aki=20Eseberri?= Sender: HPLX Mailing List From: =?iso-8859-1?q?I=F1aki=20Eseberri?= MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Hi, Everybody... Where can i find the structure of the gdb files? Thanks _______________________________________________________________ Do You Yahoo!? Yahoo! Messenger Comunicacisn instantanea gratis con tu gente. http://messenger.yahoo.es ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 10:11:50 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: 95LX adapters MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit For those looking for one: I have about 7 of the 95LX/48GX to 200LX-Cable adapters lying around. Price: A nice postcard each- I 'll pay shipping. Michel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 10:58:16 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Bob On Thu, 7 Feb 2002 08:39:08 -0700, "Feldman, Robert" wrote: > Also, there are lots of converters that will allow you to hook a serial > device to a computer's USB port, but I have not seen any that allow you to > hook a USB device to an RS-232 serial port. :( That way is not possible, because the USB is much faster that RS232. Most USB devices need this fast speed and are designed to operate only at these speeds, so there wouldn't be any sense to hook them to a, RS232 port. Also, USB leads two wires of voltage supply, RS232 not. So you would have to have an external power supply only for the USB. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 10:58:17 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Ed On Thu, 7 Feb 2002 12:12:28 -0500, Ed Padin wrote: > BTW: I have a hayes 2400 baud modem that gets its power from the > serial port. no batteries or pwoer adapter needed. I bought it on ebay > but never used it much except to test on the LX. It seemed to work at > the time. I'm not sure where it is now... somewhere in the closet, > probably. This modem does really work with the LX? That's interesting, because the serial port of the LX has very low voltages at the signal lines. I have done measures for my LED light some time ago, here the results again: Pins GD, TxD Voltage Current =========================================================== (1) short circuit 0 9.2mA (2) idle 6.3V 0 (3) 2 LEDs parallel 3.4V 4.9mA (4) resistor 27 ohms 0.24V 9.0mA (5) 2 LEDs parallel + resistor serial 3.2V 3.9mA So I would estimate the maximum power thich can be sucked out of the serial port to about 10-20 mW. Not much for a modem. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 10:58:19 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: 200lx vs. 700lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Oliver On Thu, 7 Feb 2002 22:03:40 +0100, "Oliver W. Leibenguth" wrote: > The problems with electromagnetic interference you might encounter with a > 200lx İ1¨ are eliminated on the 700lx. I've installed Ring.com İ2¨ and This is interesting!! Please try also with an "external" phone on the right of the LX (so if you wanted to use IrDA for a connection). Does ring not show disturbances then as well? If so, we should really have a look into a 700LX to see what they modified to make it more EMI-proof. Can anyone borrow me a 700LX? Or sell cheaply (may be a defective one, without phone...)? Thanks Oliver - this could lead us to the solution of the EMI problem! (which is actually not relevant anymore with newer Nokia and Ericsson phones, because they have strong IrDA ports, but the SIemens phones still have these terrible low-power IRDA transmitters so you HAVE to place the Siemens phones near the LX...) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 10:58:20 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: pscalc95 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Barry On Thu, 7 Feb 2002 16:15:12 -0600, Barry wrote: > I tried sending an email to the CIS address shown but I wasn't > able to make outlook express accept an address with a comma. In CIS addresse, you can simply replace the comma with a period, as far as I know. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 10:58:21 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: SUPER question MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Eric and list > Anything left for us forum helpers to do for SUPER? Actually not. The main work is finished, although I have still some todo items from emails from you all. Thanks for your cooperation! It is really a pleasure to work with you all. I have never seen any other forum or newsgroup which is such a nice place to talk AND is able to establish such effective and commited cooperation. Thanks of course also to the whole S.U.P.E.R. team for setting this page up, hosting the files, paying the ISDN connection fees, paying the domain fee, writing so powerful perl scripts.... :-) I have many other things to do currently - five examiniations very soon, so I have not too much time to work on SUPER these days. But I will continue to do the job, if you all agree, as updates come in quite rarely, it is not so much work. It was only very time consuming to clean up the whole thing and update to new software versions where it was possible. So, software updates and hints for new software are always welcome, and I will process them as soon as I have the time. I will soon put a complete changelog onto www.palmtop.net/whatsnew.html. But this is a C-priority. GTX daniel P.S.: BTW: Did I post the most recent changelog already? 04-FEB-02 LXMAP updated to 3.0 Juergen Korthof's Voltchck v1.1 added 07-FEB-02 updated postpdu from v1.25 to v1.27 updated Pavel Zampach's CSV2GP to v1.1 added Leo Bellantoni's dweebpak.zip -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 03:55:01 -0800 Reply-To: Paulo Custodio Sender: HPLX Mailing List From: Paulo Custodio Subject: Remote execution with XFS MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Any experiences with remote execution using XFinder R.11B13 and XFS R.6 on Win NT 4? For those who don't know this: - start xfs on the Windows desktop, connected to HPLX with serial cable - start XFinder on HPLX - access any disk drive of the windows desktop by typing in XFinder: F5 (goto), *c:\ - copy/move files as if remote drive were a HPLX local drive As in the docs, one could do in XFinder F10 (run), type *anycommand, and the command would be executed on the windows desktop. Here I get "Cannot Command". Any successes? Paulo __________________________________________________ Do You Yahoo!? Send FREE Valentine eCards with Yahoo! Greetings! http://greetings.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 13:14:49 +0100 Reply-To: Ulrich Boche Sender: HPLX Mailing List From: Ulrich Boche Subject: ZIP File Transfer with Windows 2000 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="=_alternative 004323B2C1256B5A_=" This is a multipart message in MIME format. --=_alternative 004323B2C1256B5A_= Content-Type: text/plain; charset="us-ascii" Recently I've got a new ThinkPad with Windows 2000. I installed Eric Meyer's ZIP file transfer on it but I'm having some problems. Time synchronization works fine but the file transfer has problems. I've been successful with receiving files from the HP 200 LX (although not as reliably as before) but sending files to the HP 200 LX doesn't work at all. Selecting a lower speed makes no difference. Are there any configuration settings I could use on Win 2000 to improve this? Ulrich Boche --=_alternative 004323B2C1256B5A_= Content-Type: text/html; charset="us-ascii"
Recently I've got a new ThinkPad with Windows 2000.
I installed Eric Meyer's ZIP file transfer on it but I'm having
some problems. Time synchronization works fine but
the file transfer has problems. I've been successful with
receiving files from the HP 200 LX (although not as
reliably as before) but sending files to the HP 200 LX doesn't
work at all. Selecting a lower speed makes no difference.
Are there any configuration settings I could use on Win 2000
to improve this?

Ulrich Boche
 --=_alternative 004323B2C1256B5A_=-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 14:06:34 +0100 Reply-To: "Oliver W. Leibenguth" Sender: HPLX Mailing List From: "Oliver W. Leibenguth" Organization: www.Compuseum.de Subject: Re: 200lx vs. 700lx MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi, > Please try also with an "external" phone on the right of the LX (so if > you wanted to use IrDA for a connection). Does ring not show > disturbances then as well? I tried it with the Nokia 2110 attached to the 700lx (i.e. on top of the Display in its cradle) and close to the IR-port and ring.com stayed quiet (the debug mode did not show anything, too). Tonight I'll check it with my car phone (Motorola Int. 1000 - 8-12(!) watts). If that doesn't harm the 700lx, it can be considered 100% EMI-proof ;-) > If so, we should really have a look into a 700LX to see what they > modified to make it more EMI-proof. > Can anyone borrow me a 700LX? Or sell cheaply (may be a defective one, > without phone...)? Sooner or later I disassemble every computer I get. If there are people besides me that are interrested in the mods I might discover, the 700lx will be a "sooner"-candidate. (This weekend seems just right *bg) > (which is actually not relevant anymore with newer Nokia and Ericsson > phones There are people that really use Nokia and Ericsson phones? I have several GSM-phones and never liked Nokia at all. Nokia's are gameboys with built in phone capabilities ;-) I only had 1 Ericsson (GF 768) and it lacked just everything you need.... I'm happy with my Siemens S35i (soon to be supported by a S45) and a Alcatel One Touch Com (but the useless IR-port on it really sucks) regards, Oliver ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 08:32:21 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: Re: 200lx database formats - phone notetaker, database, appt Comments: To: =?iso-8859-1?Q?I=F1aki_Eseberri?= MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Iqaki, http://hp200lx-db.sourceforge.net/docs/ and also take a quick look at: http://falbala.wu-wien.ac.at:8684/pub/english.cgi/0/27813 which notates a slight difference between 100 and 200lx files. This stuff may seem real compilcated, but just printout the formats and use them to follow along with the example, which I think is located in the zip on the first link. Also take a look at the main page: http://hp200lx-db.sourceforge.net/ ----- Original Message ----- From: "Iqaki Eseberri" To: Sent: Friday, February 08, 2002 3:05 AM > Hi, Everybody... > > Where can i find the structure of the gdb files? > > Thanks > > _______________________________________________________________ > Do You Yahoo!? > Yahoo! Messenger > Comunicacisn instantanea gratis con tu gente. > http://messenger.yahoo.es > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 15:23:10 +0100 Reply-To: Helge Holm Sender: HPLX Mailing List From: Helge Holm Subject: Re: 200lx vs. 700lx Comments: To: Daniel Hertrich MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi Daniel, I woul be willing to trade my 700 incl. the 2110 phone for a 200. Helge ----- Original Message ----- From: "Daniel Hertrich" To: Sent: Friday, February 08, 2002 9:58 AM Subject: Re: 200lx vs. 700lx > Hi Oliver > > On Thu, 7 Feb 2002 22:03:40 +0100, "Oliver W. Leibenguth" wrote: > > > The problems with electromagnetic interference you might encounter with a > > 200lx İ1¨ are eliminated on the 700lx. I've installed Ring.com İ2¨ and > > This is interesting!! > Please try also with an "external" phone on the right of the LX (so if > you wanted to use IrDA for a connection). Does ring not show > disturbances then as well? > > If so, we should really have a look into a 700LX to see what they > modified to make it more EMI-proof. > Can anyone borrow me a 700LX? Or sell cheaply (may be a defective one, > without phone...)? > > Thanks Oliver - this could lead us to the solution of the EMI problem! > (which is actually not relevant anymore with newer Nokia and Ericsson > phones, because they have strong IrDA ports, but the SIemens phones > still have these terrible low-power IRDA transmitters so you HAVE to > place the Siemens phones near the LX...) > > GTX > daniel > > -- > http://www.daniel-hertrich.de/contact > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 11:03:35 -0500 Reply-To: =?iso-8859-1?Q?Eduardo_seud=F3nimo?= Sender: HPLX Mailing List From: =?iso-8859-1?Q?Eduardo_seud=F3nimo?= Subject: Re: CF card reader into serial port In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit It worked the last time I tried it a few years ago. I'm not even sure I still have it. I'll see if I can dig it up and try it again. > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On > Behalf Of > Daniel Hertrich > Sent: Friday, February 08, 2002 3:58 AM > To: HPLX-L@uconnvm.uconn.edu > Subject: Re: CF card reader into serial port > > > Hi Ed > > On Thu, 7 Feb 2002 12:12:28 -0500, Ed Padin > wrote: > > > BTW: I have a hayes 2400 baud modem that gets its power from the > > serial port. no batteries or pwoer adapter needed. I > bought it on ebay > > but never used it much except to test on the LX. It > seemed to work at > > the time. I'm not sure where it is now... somewhere in the closet, > > probably. > > This modem does really work with the LX? > That's interesting, because the serial port of the LX has very low > voltages at the signal lines. I have done measures for my LED > light some time ago, here the results again: > > Pins GD, TxD Voltage Current > =========================================================== > (1) short circuit 0 9.2mA > (2) idle 6.3V 0 > (3) 2 LEDs parallel 3.4V 4.9mA > (4) resistor 27 ohms 0.24V 9.0mA > (5) 2 LEDs parallel + resistor serial 3.2V 3.9mA > > So I would estimate the maximum power thich can be sucked out of the > serial port to about 10-20 mW. Not much for a modem. > > GTX > daniel > > > > > -- > http://www.daniel-hertrich.de/contact > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 21:40:08 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: ZIP File Transfer with Windows 2000 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Ulrich Boche wrote: > > Recently I've got a new ThinkPad with Windows 2000. > I installed Eric Meyer's ZIP file transfer on it but I'm having > some problems. Time synchronization works fine but > the file transfer has problems. I've been successful with > receiving files from the HP 200 LX (although not as > reliably as before) but sending files to the HP 200 LX doesn't > work at all. Selecting a lower speed makes no difference. > Are there any configuration settings I could use on Win 2000 > to improve this? I had similar problems with WinME and W2000. Finally I decided to make my machine multiboot WinME Win2000 DOS Linux If I have to use ZIP or CPACK today I boot into plain DOS. HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 15:17:34 -0600 Reply-To: Tim R Sender: HPLX Mailing List From: Tim R Subject: How do I use the Post/LX setup as a terminal dial-up? In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Hi all, Tinkering w/ setting up my cell phone and Post/LX etc. I'm able to use WWW/LX and Post/LX ... but how can I do things like TELNET? I have to TELNET in and use PINE to "peek" at my email w/o losing it (long story about ISP deleting email once it thinks I've "seen" it (even if I only look at the headers .... *NO* program's "leave on server" settings will work ... I've tried and they've apologized; but no way). Anyway, is there a way for me to set up a "telnet" batch file that would let me "tel.bat" in and start some program to do this? I imagine it's: --- www "! Sender: HPLX Mailing List From: Theodore Heise Subject: Re: How do I use the Post/LX setup as a terminal dial-up? In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Fri, 8 Feb 2002, Tim R wrote: > But, 1) what program and 2) does it exist for free? > > Knowing my luck it's prob. already part of my package and I just haven't > ever found it in the docs, 'cause I haven't tried to set this up before. I believe there is a telnet client that will work with WWW/LX. Sorry, but I don't know details. > PS. There's no "ssh" for DOS is there? "Secure telnet" gives me "warmer > fuzzies" ...... Actually, there is. Check out SUPER It runs with the WATTCP stack (look for LXTCP), but I don't know if it will with WWW/LX. It's a tad slow on my double speed 200LX, so I'd guess it might be quite slow on a single speed. -- Ted Heise West Lafayette, IN, USA ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 17:04:51 -0500 Reply-To: albert.kind@uconn.edu Sender: HPLX Mailing List From: Al Kind Subject: Re: How do I use the Post/LX setup as a terminal dial-up? In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit See ftp://ftp.dasoft.com/pub/WWW/telnet.zip Cheers...AJKind -----Original Message----- From: HPLX Mailing List İmailto:HPLX-L@UCONNVM.UCONN.EDU¨On Behalf Of Tim R Sent: Friday, February 08, 2002 4:18 PM To: HPLX-L@UCONNVM.UCONN.EDU Subject: How do I use the Post/LX setup as a terminal dial-up? Hi all, Tinkering w/ setting up my cell phone and Post/LX etc. I'm able to use WWW/LX and Post/LX ... but how can I do things like TELNET? I have to TELNET in and use PINE to "peek" at my email w/o losing it (long story about ISP deleting email once it thinks I've "seen" it (even if I only look at the headers .... *NO* program's "leave on server" settings will work ... I've tried and they've apologized; but no way). Anyway, is there a way for me to set up a "telnet" batch file that would let me "tel.bat" in and start some program to do this? I imagine it's: --- www "! Sender: HPLX Mailing List From: Michel Bel Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Daniel to Ed: > > > BTW: I have a hayes 2400 baud modem that gets its power from the > > > serial port. no batteries or pwoer adapter needed. I > > bought it on ebay > > > but never used it much except to test on the LX. It > > seemed to work at > > > the time. I'm not sure where it is now... somewhere in the closet, > > > probably. > > > > This modem does really work with the LX? > > That's interesting, because the serial port of the LX has very low > > voltages at the signal lines. I have done measures for my LED > > light some time ago, here the results again: > > > > Pins GD, TxD Voltage Current > > =========================================================== > > (1) short circuit 0 9.2mA > > (2) idle 6.3V 0 > > (3) 2 LEDs parallel 3.4V 4.9mA > > (4) resistor 27 ohms 0.24V 9.0mA > > (5) 2 LEDs parallel + resistor serial 3.2V 3.9mA > > > > So I would estimate the maximum power thich can be sucked out of the > > serial port to about 10-20 mW. Not much for a modem. Daniel, you forget that the _phoneline_ has sufficient power to power a microphone and the earpiece. Should be sufficient to power a low-power modem by. You wouldn't be able to test it offline, but online it would work OK. Why do you think the phonecompany prescribes a maximum load on the line? and ISDN is even better: Just touch the wires and let yourself be phoned by someone ... 60 volts or thereabouts. Michel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 08:19:19 +0900 Reply-To: KAZU Sender: HPLX Mailing List From: KAZU Subject: Re: New batteries Comments: To: xymoxhk@HOTMAIL.COM In-Reply-To: <5.1.0.14.2.20020206233605.00a648a0@pop.techtolink.com.hk> MIME-Version: 1.0 Content-Type: Text/plain; charset=US-ASCII Hi Billy and all >how about Sony, i have saw some japan dc magazine, >they already hv 2xxx mAh AA Ni-Mh for their dc/dv product. >is that true? but 1900mAh is good enough for me. now, >i'm still using 1600 sanyo HR3US. I don't know Sony's such high capasity cell. Perhaps Sony don't have Ni-Mn FAB. I have heard Sony gets OEM cell and sell. Sony's core technology is Li ion cell. News about Sanyo. Toshiba's secondary Ni-Mn bussiness were sold to Sanyo last year. Bye ------------------------------------------ Kyoto , Japan KAZU(Kazuhisa Tanabe) kazuhisa_tanabe@nifty.ne.jp ------------------------------------------ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 00:23:47 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: CF card reader into serial port In-Reply-To: <001501c1b0f2$124d13e0$80663b3e@bel> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable On Fri, 8 Feb 2002, Michel Bel wrote: > Daniel to Ed: > > > > BTW: I have a hayes 2400 baud modem that gets its power from the > > > > serial port. no batteries or pwoer adapter needed. I > > > bought it on ebay > > > > but never used it much except to test on the LX. It > > > seemed to work at > > > > the time. I'm not sure where it is now... somewhere in the closet= , > > > > probably. > > > > > > This modem does really work with the LX? > > > That's interesting, because the serial port of the LX has very low > > > voltages at the signal lines. I have done measures for my LED > > > light some time ago, here the results again: > > > > > > Pins GD, TxD Voltage Current > > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > (1) short circuit 0 9.2mA > > > (2) idle 6.3V 0 > > > (3) 2 LEDs parallel 3.4V 4.9mA > > > (4) resistor 27 ohms 0.24V 9.0mA > > > (5) 2 LEDs parallel + resistor serial 3.2V 3.9mA > > > > > > So I would estimate the maximum power thich can be sucked out of th= e > > > serial port to about 10-20 mW. Not much for a modem. > > Daniel, you forget that the _phoneline_ has sufficient power to power a > microphone and the earpiece. Should be sufficient to power a low-power = modem > by. You wouldn't be able to test it offline, but online it would work O= K. > Why do you think the phonecompany prescribes a maximum load on the line= ? Unfortunately, I think in France the operator forbids such things... But if you do it, who knows it? ;) > and ISDN is even better: Just touch the wires and let yourself be phone= d by > someone ... > 60 volts or thereabouts. 48 V for the standard phone lines. --=20 Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- Je voudrais savoir comment chercher n'importe quelle nationalit=E9s. S'il y en a qui sont faciles =E0 trouver, il y en a d'autres m=EAmes europ=E9e= nnes ou mondiales... -+- ER in : C'est un monde =E7a -+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 18:00:10 -0600 Reply-To: TomSalwasser@COMPUSERVE.COM Sender: HPLX Mailing List From: Tom Salwasser Subject: Re: Minnesotans MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Avi, Let me be the first to wish you a warm :) welcome to Minnesota. As you know by now, our license plates say "Land of 10,000 Lakes", but that's not exactly true. There are actually over 15,000. However, the plates should read "The Peoples Republic of Minnesota, Land of 10,000 Taxes". We pay higher taxes than most states and our state legislature is larger than that of California, yet we have only a tiny fraction of CA's population. Our state bird is the common loon, a large beautiful aquatic bird with a haunting call heard in the evening. The "People's Choice" for state bird is actually the mosquito, and it's haunting buzz is heard in the evening too. It's just not fair, 9 months of winter and 3 months of mosquitoes! It's been said Minnesota 2 distinct seasons, Winter and Road Repair. We like to eat oven baked delicacies known as hot dish, and we like to fish through the ice on our frozen lakes. I like Garrison Keillor's attitude: When God hand's you lemons, make some lemonade. Keillor is hosting 300 people from around the country tomorrow for a weekend of hot dish, ice fishing, shopping at the Mall of America and of course, attending "A Prairie Home Companion", his acclaimed radio show. Even grizzled old curmudgeons like me appreciate his tongue in cheek review of Minnesota via Lake Wobegone. I complain long and loud about Minnesota in the hopes of keeping this place from being over run by riff raff. I actually have lived here all my life and would never consider living anywhere else. Well, maybe every February in Florida would be nice. Best of luck to you in your new home. May your furnace never sputter, may your car battery always harness 500 cold cranking amps. There is no 200lx user group in Minnesota, but wth such an esteemed celebrity in our midst, perhaps one should be formed. If anyone heads it up, I'll join! Regards, Tom Salwasser ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 20:39:53 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Nokia 3360 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable In December 2001 Bob Penick and Martin Bergvil exchanged notes about the 3360 and specifically making it work through its IrDA. AT&T is offering me the 3360 as an upgrade from 8260. Not sure if it is a good value, but the 3360 has a built-in wap browser, modem, and so on. Basically it has what the 8260 has, but slightly bulkier and I understand the phone quality is a bit less good than 8260. So before I jump into it, is the IrDA on the 3360 really workable with WWW/LX? Anyone has that phone? Also do you need any special service to get browsing to work? They call it SMS, but is it really the same service as is known on the GSM phones? (as I understand it, GSM phones can send short messages to any other gsm phone, regardless of service provider, but with AT&T SMS I can only send messages to other AT&T customers.) Any info will be appreciated. Thanks in advance. Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 18:20:54 -0800 Reply-To: xy mox Sender: HPLX Mailing List From: xy mox Subject: messages posting Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Hi all, Actually, i'm no check this forum about one more year. Because my LX hv some power problem then i'm back to posting a message for find a help at last two day. I know we can using http://www.technoir.nu/hplx/hplx-l/ or http://www.sp.uconn.edu/~mchem1/HPLX.shtml for check a message. but any method or address can let a browsing/posting/reply more faster and easy? ex: news.hplx.net (but down?) Billy P.S. groups.yahoo.com is good, but too many advertise. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 04:26:35 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: Yahoo using Post? Comments: To: Ed Padin MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > Yahoo allows pop mail boxes they just require that you be spammed by > them a bit but it's realy very little (hardly any) spamming on their > part. I guess I did not accept the spam element and only found out after that you cannot do pop3 independent of the website. I will have to either alter my profile or give it up. Thanks for the info on the limited spam. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 05:07:19 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: Nokia 3360 Comments: To: hplxmail@YAHOO.COM MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit >Also do you need > any special service to get browsing to work? They call it SMS, > but is it really the same service as is known on the GSM > phones? (as I understand it, GSM phones can send short > messages to any other gsm phone, regardless of service > provider, but with AT&T SMS I can only send messages to other > AT&T customers.) Hmm. My verizon service allows me to receive and as of last week, also send SMS messages. But I can send to another email address, any email address. So I guess that if the AT&T cell phone has an email address, I could send. My cell phone has an email address. Actually, I think it has two addresses - the one from "my verizon" and now, I guess, VText. Both are based on the phone number but also I've attached a name (alias) to the new Vtext address. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 05:39:45 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Daniel: >I have never seen such a devide. Besides the palmtop itself. >With Laplink or Interlink it could be used as a "serial >compact flash drive". ;-) But a pretty expensive one! merci :), Daniel :) ... by now listmembers into this thread have probably noticed that my _real_ intention is to steal from Hal Golgstein ... i'm trying to find a cheap alternative to upgrading. >Only serial to parallel, and a CF reader needs >bidirectional communication. i guess it won't work :( Bob: >The other day I was looking at PCMDIA to USB converter cards. somewhat like a doubleslot PCMCIA? i am looking for something to stick into the serial port, which i have no use for any more since i have the PC CF-reader to transfer files much faster. Glen: >What about using using a digital camera like a Kodak DC 200. It has .. first i'd need a K.200 :) well, as an alternative to upgrading i plan to use some superglue ! (.. to glue the PCMCIA card plastic container with the 220mb flash to the LX top, and cover the hinge crack at the same time) Nathalie ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 01:40:11 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: How do I use the Post/LX setup as a terminal dial-up? Comments: To: Tim R MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Start it like so: c:\www\www.exe "!telnet xxxx" Adjust the directory to fit yours. The rest tells WWW.EXE to spawn another program, called telnet with the xxxxx being the parameter that telnet wants. Telnet/LX is freeware on our Website http://www.dasoft.com No SSH. Sorry. Someone did something with it but it is apparently incredibly slow and gobbles up lots of memory. The 200LX chip is not a good platform for memory-hungry applications. Avi > Hi all, > > Tinkering w/ setting up my cell phone and Post/LX etc. I'm able to use > WWW/LX and Post/LX ... but how can I do things like TELNET? > > I have to TELNET in and use PINE to "peek" at my email w/o losing it = (long > story about ISP deleting email once it thinks I've "seen" it (even if I > only look at the headers .... *NO* program's "leave on server" settings > will work ... I've tried and they've apologized; but no way). > > Anyway, is there a way for me to set up a "telnet" batch file that = would > let me "tel.bat" in and start some program to do this? > > I imagine it's: > > --- > www "! --- > > But, 1) what program and 2) does it exist for free? > > Knowing my luck it's prob. already part of my package and I just = haven't > ever found it in the docs, 'cause I haven't tried to set this up = before. > > TIA, > > --tim > > PS. There's no "ssh" for DOS is there? "Secure telnet" gives me "warmer > fuzzies" ...... > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 01:40:26 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Minnesotans Comments: To: TomSalwasser@COMPUSERVE.COM MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hi Tom: > Avi, > > Let me be the first to wish you a warm :) welcome to Minnesota. Yeah, warm!, please. Temps were low in December. > As you know > by now, our license plates say "Land of 10,000 Lakes", but that's not > exactly true. There are actually over 15,000. Heck, from the apartment where I stayed (and will live in) in Eagan, I can see 3 lakes (well, more like ponds!) > However, the plates should > read "The Peoples Republic of Minnesota, Land of 10,000 Taxes". We pay > higher taxes than most states And you have a more organized, better educated, better cared for, and healthier state than all of them! At least the moeny pays for something good. > and our state legislature is larger than that > of California, Long winded or number of representatives? > yet we have only a tiny fraction of CA's population. That's not fair: California has all the internal immigrants of the USA! > Our state bird is the common loon, I noticed most people are, in a relaxed sort of a way imitate the bird by being slightly, and mildly, and comfortably loony! I like this a LOT! > The "People's Choice" for state bird is > actually the mosquito, and it's haunting buzz is heard in the evening = too. Got bit by two of them in July! Deadly critters! Drills like my arm! > said Minnesota 2 distinct seasons, Winter and Road Repair. So far I noted 3: Yucky humid Summer, COLD Winter and a beautiful Fall. Haven't spend any time in Spring yet! > We like to eat oven baked delicacies known as hot dish, You forgot lutefisk. > and we like to fish > through the ice on our frozen lakes. I did almost all styles of fishing in my life incl. deep sea, deep sea off Alaska, on a commercial fishing boat off Alaska, lakes, boats, piers, streams, etc... But not on ice and not diving. > I complain long and loud about Minnesota in the hopes of keeping this = place > from being over run by riff raff. Too late, this riff-raff is already a state resident - at least by the amount of time I actually lived in the state - although still has a stake in California. > I actually have lived here all my life and > would never consider living anywhere else. Well, maybe every February = in > Florida would be nice. Yes, that seems to be the crucible - pass that, and you are as good as new! > Best of luck to you in your new home. May your furnace never sputter, I rely on the apartment building management to keep stoking the heaters. > may your car battery always harness 500 cold cranking amps. Speaking of this: Reminded me to call my mechanic and have him change tha battery with a truck battery! > There is no 200lx user group in Minnesota, but wth such an > esteemed celebrity in our midst, perhaps one should be formed. You all are luminaries yourselves! Let's see: Tom, I believe Tim, and I think there were other customers. I have to say that all the people I met so far in MN have left me feeling welcome, and good, and like they care about something in the world, and that none was a zombie - a big change from LALALand... I feel like I have ALREADY have circle of close and good friends. Never felt like it so fast about any place. > If anyone heads it up, I'll join! I think that should be one of the first things I'd like to do after moving to MN full-time - form the "Palmaniancs of Minnesota", and start getting together every few weeks for a few hours! Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 01:40:27 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Nokia 3360 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > >Also do you need > > any special service to get browsing to work? They call it SMS, > > but is it really the same service as is known on the GSM > > phones? (as I understand it, GSM phones can send short > > messages to any other gsm phone, regardless of service > > provider, but with AT&T SMS I can only send messages to other > > AT&T customers.) > > Hmm. My verizon service allows me to receive and as of last week, also > send SMS messages. But I can send to another email address, any email > address. So I guess that if the AT&T cell phone has an email address, = I > could send. My cell phone has an email address. Actually, I think it > has two addresses - the one from "my verizon" and now, I guess, VText. Yeah, I can also send to an email address like xxx@yyy.com. I am not talking about it. I am talking about SMS, where the address is another phone number. AT&T allows me to send only to phones that are AT&T customers - to the best of my knowledge! I could not - allegedly - send a message to your phone because you are a Verizon customer. I believe true SMS has that ingredient, that it sends to customers of other providers. > Both are based on the phone number but also I've attached a name = (alias) > to the new Vtext address. I can even send an email from my phone to fjkaufman@worldnet.att.net - just like the one I just sent! the From: is the number of the phone. Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 01:40:28 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: hplxmail@YAHOO.COM MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > Bonjour Avi :) Bonjour! > Jo Buford asked me why you were moving. Too warm in California. Strange why Joe did not ask me directly. Is he afraid of me? > I know of a nice doctor who is list > member: > > James P. Grenert, Mayo clinic, grenert.james@mayo.edu Oh, yes, I know of him. He lives in or near Rochester in the southern part of the state. I am about 2-3 hours driving north just south of St Paul. > >Let me know in private email or post here... > > i also have addresses for astronomy clubs (if you are intersted) Not much of a chance to see things in the sky! Too much humidity. But thank you just the same. Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 23:53:46 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Serial Port question MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit As I would like to use the LX as a midi-driver, I am wondering if there is a method short of adding a crystal to set the serial port to 31250BPS, the midi-speed. If I would use an additional crystal, ( switched if necessary with a normal single or double speed) would it interfere too much with the screen? e.g. speed =standard*38400/31250, (if I could find such a crystal), say 19.5Mhz Michel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 12:44:04 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: 200lx vs. 700lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Daniel Hertrich wrote: > Please try also with an "external" phone on the right of the LX (so if > you wanted to use IrDA for a connection). Does ring not show > disturbances then as well? And please make sure, *NOT* to run RING from within SysMgr! Close SysMgr and run RING from plain DOS. (You may also run RING from within SysMgr, but only if all SysMgr settings concerning the serial port are configured ok) > Thanks Oliver - this could lead us to the solution of the EMI problem! > (which is actually not relevant anymore with newer Nokia and Ericsson > phones, because they have strong IrDA ports I think, it's still relevant. I wouldn't call the Nokia 8210 - HP200LX connection reliable. It works only in ~50% of all tries and still reports errors. Transfer rate is estimated to be 3000 baud. It reminds me often to my first 2400 modem. But I cannot blame IrDA for everything. It could also be my provider, GSM, the distance to the base station, which slows down the transfer rate. Getting a 50KB digest from this list through IrDA is a real pain and I avoid it if possible. Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 13:20:16 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hello Michel and Erwann On Sat, 9 Feb 2002 00:23:47 +0100, Erwann ABALEA wrote: > Unfortunately, I think in France the operator forbids such things... But > if you do it, who knows it? ;) Well, they cannot forbid you to attach a normal telephone, and most normal telephones still get their power from the phone line, as Michel pointed out. So if that modem doesn't need significantly more power than a standard phone, then at least won't notice it by doing line mesurements from the exchange nodes to your home. But probably they wouldn't even forbid it. What they probably forbid is to connect two devices (also two normal headsets) in parallel to the phone line, because thie lets drastically increase the power needed for ringing the phones, and the power for ringing comes also from the phone company. :-) (although you have wireless phones or so which have an external power supply). And: At least here in Germany the "Deutsche Telekom" defines exactly how any telephone should look like from the exchange center point of view (i.e. a certain resistance for DC and capacitor (=resistor for AC), so they have the ability to measure the quality of the phone line from the exchange into your house. If you have a device connected to the phone line which doesn't meet these standards, they measure wrong things. This would also happen if you connect two or more devices in parallel to the phone line. (I have two telephones and two modems all in parallel at the phone line, and I never had a problem with that, though ;-) -- in addition I run DSL over the phone line. No problem at all.) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 13:25:25 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: 200lx vs. 700lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Stefan On Sat, 9 Feb 2002 12:44:04 +0000, Stefan Peichl wrote: > I think, it's still relevant. I wouldn't call the Nokia > 8210 - HP200LX connection reliable. It works only in ~50% > of all tries and still reports errors. Transfer rate is > estimated to be 3000 baud. It reminds me often to my first > 2400 modem. With my new Ericsson T39m, the connection is relatively fast. Although it only connects with 9600, I get - observing the bytes count of Post/LX when up-/downloading messages - almost 1 kByte per second. Sometimes the transfer stalls, and in very few cases it terminates for some reason. Then I reconnect and everything is fine. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 09:07:46 -0500 Reply-To: Ed Sender: HPLX Mailing List From: Ed Subject: Re: Screen acting up MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Daniel: As you suggested, I pressed down the left edge of the screen. So far, the partly- faded-screen problem has not occurred again in about a week. So that seems to have fixed things (for now?). Thanks for your help! Regards, Ed Hi Ed On Sun, 3 Feb 2002 14:30:31 -0500, Ed wrote: > My screen had recently started to act up. Sometimes when I turn it on, the > screen is sort of faded with some parts lighter and some parts darker than > other parts. Turning it off and on again seems to cure the > problem--temporarily. This only has happened occasionally in the last few > days. Does pressing on the edge left of the screen make the problem disappear or get worse? Take a look as http://www.danniel-hertrich.de/repair and scroll down to the screen section. There you will find a description with pictures about where to press etc. This is only a test to get closer to the source of the problem. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 15:22:49 +0100 Reply-To: "Oliver W. Leibenguth" Sender: HPLX Mailing List From: "Oliver W. Leibenguth" Organization: www.Compuseum.de Subject: Re: 200lx vs. 700lx MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > And please make sure, *NOT* to run RING from within SysMgr! Starting Ring from plain Dos didn't change the EMI-error rating: 0 for the Nokia 2110, 1-9 for my Alcatel One Touch Com and 29-60 for my Motorola Int. 1000 (but it uses 8-12 watts compared to 2 watts "ordinary" mobile phones) I'm looking forward to disassemble the 700lx tomorow. I already got several pictures of the internals of a 200lx, so any significant changes should be obvious. regards, Oliver ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 09:32:22 -0500 Reply-To: Larry Tachna Sender: HPLX Mailing List From: Larry Tachna Subject: Re: Nokia 3360 Comments: To: fjkaufman@WORLDNET.ATT.NET In-Reply-To: <20020209050715.MMQT4216.mtiwmhc26.worldnet.att.net@worldnet.att.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi Fred >>So I guess that if the AT&T cell phone has an email address, I I believe att cell phones all have an email address it is the 10 digit number @att.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 09:32:25 -0500 Reply-To: Larry Tachna Sender: HPLX Mailing List From: Larry Tachna Subject: Re: hplxmail@YAHOO.COM Comments: To: hplxmail@YAHOO.COM In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit >>> Jo Buford asked me why you were moving. that's an easy one must be for a woman ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 09:06:02 -0600 Reply-To: Tim Sender: HPLX Mailing List From: Tim Subject: Re: How do I use the Post/LX setup as a terminal dial-up? In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Wahoo!!! Thanks, it works! I should have remembered that the software was at the D&A site.... For those interested on the list, this setup (prob. only works in the U.S. and isn't as good as the wireless connectivity many here enjoy and) includes; -the Samsung phone that the "Sprint Guy" is pushing in all the U.S. commercials (Model SCH-8500) -a serial cable from Sprint (about $69 bucks and comes w/ Windows software) -gender changer (I believe it's also a null modem ... it's not marked) -HP null modem cable (stamped F1015-80002) I believe the red, unmarked gender changer I have is a null modem, because the Sprint cable works w/ a Windows laptop going straight from the 9-pin port to the phone like a standard serial cable to an external modem (using two null modems, in this case seems to make it work fine w/ the LX). Anyway, Sprint's central office "pretends" to be a modem for you and your phone makes a data call at 14.4 Kbps (not fast, but I can use it in a pinch). The "cool" thing for me, is that there's no modem on your side of the equation. The cell's not big enough to have a modem in it (or they wanted to save the $$); yet you can still use your phone as an external modem. The only "warning" I can think of is that I believe Sprint only includes 30 min. of monthly digital access w/ most plans (and this counts as digital access .... so does "web browsing" with the phone, I think ... a VERY frustrating experience on the phone's screen..... Much easier to read news w/ HV!). I'll download and read the docs w/ all the "get" stuff people were using to get and store webpages offline for newsreading (using my landline and external modem!), before asking for help w/ the rest of this.... (anyone who wants to send tips in advance is welcome! ). Thanks, Al for the help (and to all who wrote the components of the WWW/LX package), --tim -----Original Message----- From: HPLX Mailing List İmailto:HPLX-L@UCONNVM.UCONN.EDU¨On Behalf Of Al Kind Sent: Friday, February 08, 2002 4:05 PM To: HPLX-L@UCONNVM.UCONN.EDU Subject: Re: How do I use the Post/LX setup as a terminal dial-up? See ftp://ftp.dasoft.com/pub/WWW/telnet.zip Cheers...AJKind ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 16:51:50 +0100 Reply-To: Tomas Moberg Sender: HPLX Mailing List From: Tomas Moberg Subject: Re: How do I use the Post/LX setup as a terminal dial-up? Comments: To: Tim R MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Yes! I have an INTERACT box in post/lx that does this. When I mark the box for visit it automaticaly telnets to my Unix account = and starts pine for me. (From there I also can start an mICQ session) ------------ Parts of post.cfg: İSYSTEM¨ ExtProg=3Dc:\io\www\robot.exe c:\io\www\robot\abc.scr ... İFOLDERS¨ INTERACT=3DX ... ------------- abc.scr (basicly written by Andreas Garzotto: You have to change some stuff to suit Your needs(ie Yourhost.abc.se 5.7, word:, atle) The"send setenv TERM dumb\r" is to skip the vt100 code so that I dont have to se the controlcodes in the captured session.(I think Pine dont work without vt100) n ABC PostCfg none if (found none) noCfg ~ error $it :noCfg open Yourhost.abc.se echo waiting for answer... wait 20 5.7 echo sending login\n n ABC Login send $it\r echo waiting for password prompt... wait 10 word: echo sending password\n n ABC Password send $p\r echo waiting for main prompt...\n wait 40 atle ;! telnet local send setenv TERM dumb\r :loop1 n next SCRIPTS if (!next) sdone call $k $v jump loop1 :sdone echo na no na no...\n send exit\r @ 1 -------------- Parts of Robot.cfg: ; Configuration file for ROBOT/LX ... İABC¨ Login=3DYourlogin Password=3DYour Password ... ------------- Nobody said it was simple ;) An easier way is to manualy star a command.com (a dos prompt) with www.lx. c:\www -d "!command.com" from there just type telnet yourplace.abc.se (if You have placed telnet/lx in Your path that is. Tim R wrote: > > Anyway, is there a way for me to set up a "telnet" batch file that = would > let me "tel.bat" in and start some program to do this? /tomas moberg Uppsala ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 18:31:55 +0100 Reply-To: Yves Leurquin Sender: HPLX Mailing List From: Yves Leurquin Subject: Re: CF Capability MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Martin, > Have you tried to have a Jamdrive in one area only of SC? I tried that > but the Hplx hangs. No, I didn't but yes, I would expect the 200LX to hang if switch from one session to another. On the other hand I have often one secdev drive opened in one session and = it is accessible from each SC session (7 for the moment). \/ /ves _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 12:36:29 EST Reply-To: TCU549@AOL.COM Sender: HPLX Mailing List From: Kat Doyle Subject: cc:mail and Yahoo? Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit How is this done? Using WWW/LX? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 17:30:52 -0200 Reply-To: ecesana@ax.apc.org Sender: HPLX Mailing List From: Eduardo Cesana Organization: ECOLOGICA Subject: Re: Around The World Info In-Reply-To: MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Eduardo Cesana Salvador BA Brasil HP200LX 6 MB Since 1997 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 21:46:23 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: CF card reader into serial port In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable On Sat, 9 Feb 2002, Daniel Hertrich wrote: > Hello Michel and Erwann > > On Sat, 9 Feb 2002 00:23:47 +0100, Erwann ABALEA wr= ote: > > > Unfortunately, I think in France the operator forbids such things... = But > > if you do it, who knows it? ;) > > Well, they cannot forbid you to attach a normal telephone, and most > normal telephones still get their power from the phone line, as Michel > pointed out. > So if that modem doesn't need significantly more power than a standard > phone, then at least won't notice it by doing line mesurements from the > exchange nodes to your home. But probably they wouldn't even forbid it. In France, everything you would like to plug on the phone line must be validated by the government (DGPT, Direction G=E9n=E9rale des Postes et Telecommunications). It's even forbidden to sell in France material that hasn't been validated (the mentions such as "for export only" doesn't allow you to sell such things). I guess such a modem wouldn't be validated... :( --=20 Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- C'est chiant cette r=E8gle de blague obligatoire. En ce moment j'ai plut=F4= t envie de voir des os pil=E9s. Mais =E7a va passer : hop un mon gros noeud sur /dev/null et =E7a va mieux. -+- GNA in : Guide du Neuneu d'Usenet - L'a p=E9t=E9 un neunuerone -+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 22:31:57 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: Nokia 3360 Comments: To: Larry Tachna MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > Hi Fred > > >>So I guess that if the AT&T cell phone has an email address, I > > I believe att cell phones all have an email address it is the 10 digit > number @att.net Actually, the message I got from Avi, shows: 99999....@mobile.att.net I replied from the desktop where it arrived and we shall see if he gets the reply. I also then added his "address" to my phone and sent a message to that address. While it was "sent" (from verizon to ATT), I have not received the confirmation beep. So maybe these carriers purposely lock each other out??? Then again, the verizon sms (or its site) has been up/down on the occasions I have played. The typing of messages on the phone-keypad is tedious, altho, the absence of easy upper/lower case should make _YOU_ feel totally at home (gd&r) Fred ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 02:07:34 +0200 Reply-To: Alchemija Sender: HPLX Mailing List From: Alchemija Subject: Re: Around the world In-Reply-To: <20020204181639.22701.qmail@web13805.mail.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sorry - late, modem problems :(( Algirdas Chomentauskas Vilnius, Lithuania Lithuanian/Polish HP100LX -- Cheers Alchemija mailto:alchoma@is.lt ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 9 Feb 2002 20:16:58 -0500 Reply-To: Paulo Custodio Sender: HPLX Mailing List From: Paulo Custodio Subject: Re: PIM/PE with palrun on a Desktop machine MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > Paulo Custodio wrote: > > > > Any success of running PIM/PE with palrun on a Windows > > NT machine? Found the solution to the keyboard mapping error! If I run palrun under cmd.exe (Win NT 4), the keyboard is not mapped correctly. But if I run palrun under command.com, all is OK with the keyboard mapping. Paulo ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 09:55:43 +0100 Reply-To: Michael Lennartz Sender: HPLX Mailing List From: Michael Lennartz Subject: HP 200/700lx and EMI Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable Hi EMI-guys, I did a little test with 200LX and 700LX. The 700LX is less sensitive against EMI. The 200LX responds on signals from a cordless phone as well as from the mobile phone (both Siemens). The 700LX only recognizes the mobile phone (another sensor?). The detector seems to be al the right side of the gadget, here the sensitive is a little bit better. Mit freundlichem Gru=DF / Regards / Saluton Michael Lennartz lennartz-mi@gmx.net Fax: +49 89 244 34 52 57 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 14:17:49 +0200 Reply-To: maartens@IAFRICA.COM Sender: HPLX Mailing List From: Rian Maartens Subject: POSTPDU: PART 1 REPEAT? Comments: To: Tony Hutchins MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Dear Tony I just tried the feature where postpdu splits long SMS messages. Unfortunately part 1 simply repeated over and over and it never went on to part 2. Eventually I pressed ESC / CTRL to abort before 14 messages (only with part 1) was sent. Any ideas what I may done wrong? All the best Rian Maartens Tel: +27 21 4233737 Fax: +27 21 4232978 Mob: +27 832752488 maartens@iafrica.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 15:59:19 +0100 Reply-To: Tamas Feher Sender: HPLX Mailing List From: Tamas Feher Subject: (Fwd) CF card and the HP95LX: experiences. MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Hello All! I read this report on the mailing list for Sharp PC3100 palmtop. >From: FELIQUE CHRISTIAN > >This is what my experience is with a Sandisk CF 32Mb card: >1) In the HP95LX the CF still draws current even when it is turned off. >2) When reading/writing to card, annoying black lines appear on screen. > >1)I solved this by cutting the Vcc line inside the PCMCIA to CF >adapter, on the PCMCIA side of the adapter. Note that there are >three voltage lines on a PCMCIA connector: Vpp1,Vpp2,Vcc. Vpp1 >and Vpp2 are (at least I think so) connected to the Vcc of the >CF slot. The CF slot only has Vcc, and no Vpp1 and Vpp2. I think >that Vcc on the PCMCIA connector is always powered, and Vpp1 and >Vpp1 is only powered when reading, writing to the card. Anyway, >the CF card still works, and the card doesn't draw current >anymore when my 95LX is turned off. > >If you experience the same problem on your Sharp, then this >might be a solution for you too. > >2) Reason for this problem is the fact that the CF drains a lot of current >when reading/writing. The LCD screen is connected to same 5V >power supply as the PCMCIA slot. That explains the black lines. > >Do you know how much current a CF drains when reading/writing ? > > Best Regards, Christian Felique. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 10:30:35 -0500 Reply-To: Larry Tachna Sender: HPLX Mailing List From: Larry Tachna Subject: Re: Nokia 3360 Comments: To: fjkaufman@worldnet.att.net In-Reply-To: <20020209223154.YYUY21579.mtiwmhc22.worldnet.att.net@worldnet.att.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi Fred, You are correct it is phonenumber@mobile.att.net sorry about that!! hey my att phone has a shift key not that i use it ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 07:39:47 -0800 Reply-To: Victor Roberts Sender: HPLX Mailing List From: Victor Roberts Subject: Re: Around The World Info Comments: To: fjkaufman@WORLDNET.ATT.NET MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Victor Roberts Burnt Hills, NY. Between Albany, NY and Saratoga Springs, NY, about 150 miles north of New York City. Born in the Bronx, like Fred. Have also lived in Boston, Baltimore, Washington, DC, and Cleveland, Ohio. In addition to being born in the same borough of New York as Fred, all four of my grandparents are from the Minsk area of Russia. Perhaps Fred and I are related in some distant way Scary thought. 32MB 200LX, 1MB 100LX, 1MB 95LX > > Fred Kaufman > > Seattle, WA via brief 3 year stay in Chicago and da birthplace, > DA BRONX, NY > > Grandparents, all four, from Minsk/Pinsk from what I heard - no > geneology here. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 12:06:54 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable I am missing a way to do some homebanking with the hplx. Since access to btx 01910 was stopped here in Germany, I don't know any way even to get the state of my bankacount. Are there any ideas to how to get some bankacount figures with the hplx? Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 08:06:05 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: POSTPDU: PART 1 REPEAT? Comments: To: maartens@iafrica.com MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Mon, 11 Feb 2002 07:45:42 +1300 (NZDT) 06h27m53s ago ... On Sun, 10 Feb 2002 14:17:49 +0200, maartens@iafrica.com wrote: > I just tried the feature where postpdu splits long SMS > messages. Unfortunately part 1 simply repeated over and over > and it never went on to part 2. Eventually I pressed ESC / > CTRL to abort before 14 messages (only with part 1) was sent. > > Any ideas what I may done wrong? This was possibly a bug in an earlier version. Make sure you have version 1.27 published on 27 January, available on www.palmtop.net and at www.geocities.com/aghutchins/. If in fact you do have that version, then you have found a very interesting and unfortunately expensive (sorry!) bug - please send me your SMS.O so I can find out exactly what might trigger this. Thanks! - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 09:28:58 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: POSTPDU: PART 1 REPEAT? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Mon, 11 Feb 2002 09:19:57 +1300 (NZDT) 01h13m52s ago ... On Mon, 11 Feb 2002 08:06:05 +1300 (NZDT), Tony Hutchins wrote: > This was possibly a bug in an earlier version. Make sure you > have version 1.27 published on 27 January, available on > www.palmtop.net and at www.geocities.com/aghutchins/. I just checked and indeed this was a bug that existed for a very short space of time (a few hours) in version 1.11 uploaded on 20 January. I did upload different versions too frequently, but they did need testing in different countries. So, if you see a problem with postpdu, please make sure you have the latest version, which is already 2 weeks old, and seems quite stable now. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 23:16:21 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: Nokia 3360 Comments: To: Larry Tachna MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > You are correct it is phonenumber@mobile.att.net sorry about that!! hey my > att phone has a shift key not that i use it Well, it appears that the different carriers block cross-mail from one another. At least, the message I sent Avi from my phone never did seem to arrive. I don't know if he tried sending to me. Oh, probably not since if he did not get my message, he would not have had my cellphone number (G) Seems as if, as usual, the USA is behind Europe in cellphone stuff. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 23:16:27 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: Around The World Info Comments: To: Victor Roberts MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > In addition to being born in the same borough of New York as > Fred, all four of my grandparents are from the Minsk area of > Russia. Perhaps Fred and I are related in some distant way > Scary thought. Very scary, cousin! (G) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 19:56:42 -0500 Reply-To: Eduardo seudsnimo Sender: HPLX Mailing List From: Eduardo seudsnimo Subject: Re: (Fwd) CF card and the HP95LX: experiences. In-Reply-To: <3C6698D7.12150.411836@localhost> MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable This is an important piece of info for 95lx users. You have to use a = special driver for flash cards but the current-draw-while-off problem = has been there since the beginning. I had a 95lx for a brief period of = time. It was cute but I could find no useful purpose because I already = had a 200lx. I understand that the 95lx has a stronger IR port and can = be used as a universal remote but this did not interest me. >=20 > Hello All! >=20 > I read this report on the mailing list for Sharp PC3100 palmtop. >=20 > >From: FELIQUE CHRISTIAN > > snip > >Vpp1 is only powered when reading, writing to the card. Anyway, > >the CF card still works, and the card doesn't draw current > >anymore when my 95LX is turned off. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 17:52:14 -0800 Reply-To: tghess@COMPUSERVE.COM Sender: HPLX Mailing List From: "Thomas G. Hess" Subject: HPLX200 not responding to keyboard MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Help, My LX200 quit responding to the keyboard. I had turned it off & used compressed air to on the keyboard (some keys had been sticking). I was using it with a Jornada keyboard from Thadeus. I turned it back on and started to work in VDE in a software carasel session. After a bit a minute or so, a line typed as "Comparing actual performance with standards" became "C60*ar5ng the act4a3 *erf6r0ance" My typing isn't that bad. The machine does not respond to any keys from either keyboard. It does not respond to a reboot or a hard reset. It will not turn off. Any ideas, suggestions, or help would be greatly appreciated. TIA Thomas G. Hess Olympia, Washington ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 21:11:07 -0500 Reply-To: wally@theblackmoor.net Sender: HPLX Mailing List From: Walter Francis Organization: Linux is organization enough.. Subject: Re: HPLX200 not responding to keyboard Comments: To: tghess@COMPUSERVE.COM MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Thomas G. Hess wrote: > My LX200 quit responding to the keyboard. I had turned it off & > used compressed air to on the keyboard (some keys had been > sticking). I was using it with a Jornada keyboard from Thadeus. > I turned it back on and started to work in VDE in a software > carasel session. > After a bit a minute or so, a line typed as "Comparing actual > performance with standards" became "C60*ar5ng the act4a3 > *erf6r0ance" My typing isn't that bad. I would have to guess that you have dislodged the ribbon strip connecting the keyboard to the palmtop. I'll have to look at the disassemling instructions on hplx.net to check something.. Well, actually it looks like some sort of press fitting, anyway, the keyboard is connected to the motherboard in such a way that compressed air possibly could move or disrupt the connection. Perhaps someone else who has taken their palmtop apart a few times can give more info :) http://www.hplx.net/hardware.apa.big.html shows some pictures of a 200LX being taken apart, near the bottom shows where the keyboard connects to the motherboard. The way to get into the keyboard is by carefully removing the stuck-on label on the keyboard (which has all the print and such on it) and from there you remove various layers to get to the bottom. Be very, very careful with the space bar especially, as they're easily broken in normal use, let alone when taken apart. Good luck :( Next time, don't be so rough on 'er.. I have an F2 that has something in it I need to take care of eventually myself, but I think I'll try a q tip with some alcohol on it and such. -- Walter Francis http://theblackmoor.net Powered by Red Hat Linux 7.2 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 10 Feb 2002 19:51:58 -0800 Reply-To: tghess@COMPUSERVE.COM Sender: HPLX Mailing List From: "Thomas G. Hess" Subject: Re: HPLX200 not responding to keyboard Comments: To: wally@theblackmoor.net MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Thanks for your quick response. Less than 20 minutes. The people on this mailing list are really great ----- Original Message ----- From: "Walter Francis" To: Cc: Sent: Sunday, February 10, 2002 6:11 PM Subject: Re: HPLX200 not responding to keyboard > > Thomas G. Hess wrote: > > > My LX200 quit responding to the keyboard. I had turned it off & > > used compressed air to on the keyboard (some keys had been > > sticking). I was using it with a Jornada keyboard from Thadeus. > > I turned it back on and started to work in VDE in a software > > carasel session. > > After a bit a minute or so, a line typed as "Comparing actual > > performance with standards" became "C60*ar5ng the act4a3 > > *erf6r0ance" My typing isn't that bad. > > I would have to guess that you have dislodged the ribbon strip connecting > the keyboard to the palmtop. I'll have to look at the disassemling > instructions on hplx.net to check something.. > > Well, actually it looks like some sort of press fitting, anyway, the > keyboard is connected to the motherboard in such a way that compressed air > possibly could move or disrupt the connection. Perhaps someone else who has > taken their palmtop apart a few times can give more info :) > > http://www.hplx.net/hardware.apa.big.html shows some pictures of a 200LX > being taken apart, near the bottom shows where the keyboard connects to the > motherboard. The way to get into the keyboard is by carefully removing the > stuck-on label on the keyboard (which has all the print and such on it) and > from there you remove various layers to get to the bottom. Be very, very > careful with the space bar especially, as they're easily broken in normal > use, let alone when taken apart. > > Good luck :( Next time, don't be so rough on 'er.. I have an F2 that has > something in it I need to take care of eventually myself, but I think I'll > try a q tip with some alcohol on it and such. > > -- > Walter Francis > http://theblackmoor.net Powered by Red Hat Linux 7.2 > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 05:41:34 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: HPLX200 not responding to keyboard Comments: To: tghess@COMPUSERVE.COM MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > Help, > > My LX200 quit responding to the keyboard. I had turned it off & > used compressed air to on the keyboard (some keys had been Are you sure it was only compressed air? Sounds as if there is a short between keys or contacts. Actually, the keyboard connection press fitting is accessed from below. Just a summary and not a how to as I've only watched! You would (after viewing the site and crossing fingers) BACKUP ALL DATA. Remove all batteries. Remove the four rubber feet. Find the proper torq size screw driver. Carefully using finger nail or credit card pry the lower case halves apart. There is some clip/connector to the battery compartment. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 05:41:38 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: HPLX200 not responding to keyboard Comments: To: tghess@COMPUSERVE.COM MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > Thomas G. Hess > Olympia, Washington Oh, do you work for the state? Or just an innocent down there? (G) Seattle, here. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 09:30:31 +0200 Reply-To: Rian Maartens Sender: HPLX Mailing List From: Rian Maartens Subject: PostPdu and mass SMS Comments: To: Tony Hutchins MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit A friend finds SMS messages the most effective way to advise clients of upcoming events. Whereas she normally takes 45 minutes to send about 200 messages, one by one from her phone, I can help her send them from the HP using PostPdu and a file containing all the numbers in a few minutes. It works really well. The one small improvement to be considered is the best way to avoid the "checking" of the previous 200 messages before sending the next message. We can delete all the previous messages (it seems this can only be done one by one!) but then we don't have a record. Is there no way the program can simply "jump' to the next message to be sent without the "checking" procedure? All the best Rian Maartens Cape Town, RSA ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 09:30:06 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: PostPdu and mass SMS MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Rian On Mon, 11 Feb 2002 09:30:31 +0200, Rian Maartens wrote: > The one small improvement to be considered is the best way to avoid the "checking" of the previous 200 > messages before sending the next message. We can delete all the previous messages (it seems this can only be > done one by one!) but then we don't have a record. Is there no way the program can simply "jump' to the next > message to be sent without the "checking" procedure? I cannot speak for postPDU, but I can do so for Post/LX: You can delete the previous messages in a faster way than one by one: Go into the outbox and move the cursor to the first message you want to KEEP (or to the last message if you want to delete them all). Then press Backspace and choose "all previous". Or if you want to delete all sent messages from the outbox, simply go into the outbox, press backspace and choose "read/sent". GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 21:42:15 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: PostPdu and mass SMS MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Mon, 11 Feb 2002 21:13:38 +1300 (NZDT) 43m07s ago ... On Mon, 11 Feb 2002 09:30:31 +0200, Rian Maartens wrote: > A friend finds SMS messages the most effective way to advise > clients of upcoming events. Whereas she normally takes 45 > minutes to send about 200 messages, one by one from her > phone, I can help her send them from the HP using PostPdu > and a file containing all the numbers in a few minutes. It > works really well. Great! You friend could also probably send to a "group" of numbers from the phone. > The one small improvement to be considered is the best way > to avoid the "checking" of the previous 200 messages before > sending the next message. Where did the 200 separate messages come from? > We can delete all the previous > messages (it seems this can only be done one by one!) but > then we don't have a record. Oh, on re-reading I now understand!! I am a bit slow. Note that with post/lx you can use the backspace key and delete all marked, unmarked etc. But what you want is not to have all the facsimiles in the outbox. I should have made the default the inbox. Just put SMSX=SMS in your İSMS¨ section. Then all the "receipts" go in the inbox. > Is there no way the program > can simply "jump' to the next message to be sent without the > "checking" procedure? Ah, I think I see what you mean. Do you have 200 separate messages in the outbox? When you see "checking" postpdu is looking for the next message to be sent. There is no way around this. But if everybody gets the *same* message you only need to have one message in the outbox. Just put all the 200 mobile numbers in a text file and use the "To: File" feature of POST/LX. Then the one message will be sent 200 times - or, is that what you do? -- yes, I see now - that is what you did. Or, is the outbox filling up with other messages - the facsimilies? If so either put Facsimile=0 or use SMSX=.. as described in the docs. I have SMSX=SMSX and SMSX=X in folders. This way, all receipts are in SMSX.I and SMS.O is kept small. SMS.I only has received messages. See the docs. I am sure postpdu, as it is, can be set up to do mass SMS efficiently, although it wasn't designed with this in mind. I *knew* I should have changed the default behaviour! Too late now . The brief answer to your question is add SMSX=SMS in your İSMS¨ section. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 22:30:30 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: PostPdu and mass SMS MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Mon, 11 Feb 2002 21:45:20 +1300 (NZDT) 01h14m49s ago ... On Mon, 11 Feb 2002 09:30:31 +0200, Rian Maartens wrote: re sending 200 SMS at once. 1. Here is what I think happened: -------------------------------- POSTPDU was installed without any special options. One message was written in SMS.O with a "To: file" where "file" contained the 200 mobile numbers/e-mail addresses. This message was sent, 200 times, and a "receipt" message for each transmission was placed in the outbox. A new message was then written in the outbox and sent. When this message was sent POSTPDU had to start at the beginning of the outbox and keep searching until it found the message to send. I agree this long search is undesirable. 2. Here is how to fix the situation. ------------------------------------ If you are really into mass SMS you need a second X-box called SMSX, just for holding receipts. At the moment they clog the outbox. You don't want them clogging the SMS inbox either. So, quit POST/LX, just add SMSX=X to the POST.CFG İFOLDERS¨ section, and re-start POST/LX. Go to the SMS.O where you now have maybe 202 messages. Press Shift+spacebar. This will mark all the messages. I assume you want to leave the actual messages you wrote in SMS.O - so press spacebar on the first and last to take off the marks. Now press F9 to move the messages - choose SMSX as the destination - they can go to the SMSX inbox. There we go, the situation is all tidy again. 3. How to avoid clogging the outbox in future: --------------------------------------------- In your İSMS¨ section add SMSX=SMSX - this will direct all receipts directly to SMSX in future, and there will be no need for the proceedure above. I am pretty sure the SMSX feature is described in the POSTPDU.DOC (somewhere) - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 07:09:11 -0600 Reply-To: TomSalwasser@COMPUSERVE.COM Sender: HPLX Mailing List From: Tom Salwasser Subject: OT: German Translation MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hello friends from Deutschland, others may ignore. Can you help me with German syntax for a phrase? If a winery was named Little Thunder Winery in English, would the correct translation be Kleine Donner Weinkellerei? I think I've translated the words correctly but perhaps the order of the words in German should change. If it would help, "Little Thunder" is the name of a lake. The winery is located near the lake. Vielen Dank, Tom Salwasser ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 09:37:30 -0500 Reply-To: Damond Walker Sender: HPLX Mailing List From: Damond Walker Subject: Memory Cards: 95lx and Poqet MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hello, I'm looking around for information regarding memory cards and needless to say I'm a bit confused. I have a 95lx and a Poqet. While the Poqet can use the larger capacity SanDisk cards I don't think the 95 can. So I'm looking to buy a SanDisk for the Poqet but also an older one meg card to transfer data between the 95 and Poqet. Would someone be so kind as to enlighten me on the differences between the cards -- and vendors who still have both types of cards in stock? --- Damond Walker Syncretic Software, Inc. (302) 793-0300 x28 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 10:28:31 -0500 Reply-To: Eduardo seudsnimo Sender: HPLX Mailing List From: Eduardo seudsnimo Subject: Re: Memory Cards: 95lx and Poqet Comments: To: Damond Walker In-Reply-To: <00b201c1b309$a2eaf7f0$3402d341@syncreticsoft.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Here's some information from what I've read about the 95LX. I had one = for a short time but do not have any real experince with it: - you can use large sized 32MB?) sandisk cards with it as long as you = have a special driver.=20 - The card will draw current from the 95LX while it is off so you have = to remove the card when you turn it off - There was a recent post about how to get around the current draw issue = if you're using a compact flash card with a full size adapter > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On=20 > Behalf Of > Damond Walker > Sent: Monday, February 11, 2002 9:37 AM > To: HPLX-L@uconnvm.uconn.edu > Subject: Memory Cards: 95lx and Poqet >=20 >=20 > Hello, >=20 > I'm looking around for information regarding memory=20 > cards and needless > to say I'm a bit confused. I have a 95lx and a Poqet. =20 > While the Poqet can > use the larger capacity SanDisk cards I don't think the 95 can. >=20 > So I'm looking to buy a SanDisk for the Poqet but also=20 > an older one meg > card to transfer data between the 95 and Poqet. >=20 > Would someone be so kind as to enlighten me on the=20 > differences between > the cards -- and vendors who still have both types of cards=20 > in stock? >=20 >=20 > --- > Damond Walker > Syncretic Software, Inc. > (302) 793-0300 x28 >=20 > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml >=20 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 17:56:22 +0100 Reply-To: Sidney Ho Sender: HPLX Mailing List From: Sidney Ho Subject: Re: AA Batteries Shoot-Out Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit For us battery fanatics, I came across this interesting (and ongoing) shoot out for most durable batteries on a digital imaging site. HPLX users will find it a very useful reference. Note that batteries are up to 1700-1800 mAh and type of chargers make a lot of difference. http://www.imaging-resource.com/ACCS/BATTS/BATTS.HTM Sidney Ho ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 12:16:24 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Obviously homebanking is not of much interest to the list - or is there no solution? If one could combine www/lx with one of the old btx programms, it should work. If I start: www "!btx.com" a connection to t-online is established but the btx programm will not work. A simple vt100 terminal evoked after connection could do the trick, I think. Why is there no https for the hplx :-(. Uli > I am missing a way to do some homebanking with > the hplx. Since access to btx 01910 was stopped > here in Germany, I don't know any way even to get > the state of my bankacount. > Are there any ideas to how to get some bankacount > figures with the hplx? > Uli > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 12:40:07 -0500 Reply-To: Bruce_Martin@MANULIFE.COM Sender: HPLX Mailing List From: Bruce Martin Subject: Re: Remote execution with XFS MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii > As in the docs, one could do in XFinder F10 (run), > type *anycommand, and the command would be executed on > the windows desktop. > > Here I get "Cannot Command". Any successes? > It may be that X-Finder cannot find "anycommand". Is it in your path? You may need to supply the path to the commmand, such as: *c:\whatever\anycommand Bruce Martin ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 12:07:30 -0600 Reply-To: jmusielewicz@earthlink.net Sender: HPLX Mailing List From: John Musielewicz Subject: Re: homebanking with hplx In-Reply-To: MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Nowadays it seems like all the home banking is web based and needs a secure browser. Citibank used to have dialup banking using a dos program which I still have but discontinued it in favor of the web. The 200LX does not have a https browser and nobody seems to want to write one so it looks like it is out for home banking. I have read of some people using datacomm to access their account but have never found a bank with that kind of access. I would love to do home banking with billpay with the LX- it is one reason I own a laptop (so I can pay my bills while traveling), but since Citibank I just haven't found a bank that supports it and dos. John On 11 Feb 2002 at 12:16, Ulrich Allen wrote: > Obviously homebanking is not of much interest to the > list - or is there no solution? > If one could combine www/lx with one of the old btx programms, > it should work. If I start: www "!btx.com" a connection > to t-online is established but the btx programm will not > work. A simple vt100 terminal evoked after connection > could do the trick, I think. > Why is there no https for the hplx :-(. > Uli > > > I am missing a way to do some homebanking with > > the hplx. Since access to btx 01910 was stopped > > here in Germany, I don't know any way even to get > > the state of my bankacount. > > Are there any ideas to how to get some bankacount > > figures with the hplx? > > Uli > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 16:09:56 -0700 Reply-To: Bob Christopher Sender: HPLX Mailing List From: Bob Christopher Subject: CPACK font Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit It is possible to get another font to work in CPACK? The embedded font is a real drag to look at for any length of time. Is there any way to get Helv200.com work as the default font? Bob Bob Christopher . Littleton, Colorado USA . bob@palmtop.com HP 200-LX Palmtop . Minox Cameras . All The Small Stuff ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 12:41:49 -0600 Reply-To: rob@rclewis.com Sender: HPLX Mailing List From: robert c lewis Subject: GARLIC & Appointment Database? Comments: cc: Rob Lewis In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Just noticed (while trying to shorten my appt database) that there is a 'record missing' and the operaition did not complete. As the database is getting too large to be fast, I really need to shorten it. Is GARLIC the best way to do this or is there another way? Will GARLIC work with the APPT database or only with other user-defined files? Thanks. Rob ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 14:15:51 -0500 Reply-To: wally@theblackmoor.net Sender: HPLX Mailing List From: Walter Francis Organization: Linux is organization enough.. Subject: Re: OT: German Translation Comments: To: TomSalwasser@COMPUSERVE.COM MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Tom Salwasser wrote: > Hello friends from Deutschland, others may ignore. > Can you help me with German syntax for a phrase? If a winery was named > Little Thunder Winery in English, would the correct translation be > Kleine Donner Weinkellerei? I think I've translated the words correctly > but perhaps the order of the words in German should change. According to a friend of mine, your syntax is correct. He says wein-kellerei, but I think it's the same. > If it would help, "Little Thunder" is the name of a lake. The winery is > located near the lake. > Vielen Dank, Sie sind willkommen. -- Walter Francis http://theblackmoor.net Powered by Red Hat Linux 7.2 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 13:33:27 -0600 Reply-To: TomSalwasser@COMPUSERVE.COM Sender: HPLX Mailing List From: Tom Salwasser Subject: Re: OT: German Translation MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Kleine Donner Weinkellerei Wally wrote. > > According to a friend of mine, your syntax is correct. He says > wein-kellerei, but I think it's the same. > Thanks Wally. Jurgen mentioned that Kleine should be Kleiner. Do you agree? Ciao, Tom Salwasse ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 20:43:04 +0100 Reply-To: "Oliver W. Leibenguth" Sender: HPLX Mailing List From: "Oliver W. Leibenguth" Organization: www.Compuseum.de Subject: Re: OT: German Translation MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > Thanks Wally. Jurgen mentioned that Kleine should be Kleiner. Do you agree? Depends on what's little ;-) If it's a "little thunder" it translates as "kleiner Donner Weinkellerei". If it's a "little winery" it translates "kleine Donner Weinkellerei". regards, Oliver ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 20:50:19 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: OT: German Translation MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Tom On Mon, 11 Feb 2002 07:09:11 -0600, Tom Salwasser wrote: > Can you help me with German syntax for a phrase? If a winery was named > Little Thunder Winery in English, would the correct translation be Kleine > Donner Weinkellerei? I think I've translated the words correctly but perhaps > the order of the words in German should change. In German one would say Weinkellerei "Kleiner Donner" (i.e. first the "descriptive" part and then the name in quotes or without quotes. But with quotes it is clearer that this is a name). GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 20:50:21 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: OT: German Translation MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Walter On Mon, 11 Feb 2002 14:15:51 -0500, Walter Francis wrote: > According to a friend of mine, your syntax is correct. He says > wein-kellerei, but I think it's the same. In my opinion, and according to the German dictionary "Der Duden" Weinkellerei can only be written in one word. > Sie sind willkommen. And this one is a direct translation of "you are welcome", right? The German would say "gern geschehen" or "bitte". :-¨ "Sie sind willkommen" one would only say if one invites anotherone to come to him. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 20:59:36 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: OT: German Translation MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hallo Oliver! On Mon, 11 Feb 2002 20:43:04 +0100, "Oliver W. Leibenguth" wrote: > Depends on what's little ;-) > If it's a "little thunder" it translates as "kleiner Donner Weinkellerei". > If it's a "little winery" it translates "kleine Donner Weinkellerei". Tom said, the winery is named after a lake which is called "little thunder", so it must be "kleiner Donner", not a little winery. But, would you really say that in that order? "Kleiner Donner Weinkellerei"? Sounds somewhat strange, IMO. Let's meet in the Bella Donna Ristorante.... no. It's the Ristorante "Bella Donna". Interesting problem! :-) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 14:59:38 -0500 Reply-To: wally@theblackmoor.net Sender: HPLX Mailing List From: Walter Francis Organization: Linux is organization enough.. Subject: Re: OT: German Translation Comments: To: TomSalwasser@COMPUSERVE.COM MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Tom Salwasser wrote: > Thanks Wally. Jurgen mentioned that Kleine should be Kleiner. Do you agree? Ack, yes! Sorry about that. Got distracted because of a networking issue in the middle of my reply and left that out. -- Walter Francis http://theblackmoor.net Powered by Red Hat Linux 7.2 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 15:46:51 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Thanks for your reply, John. It's a pity. Is it possible to do homebanking with Windows CE? What about Psion? You are right: a easy way could be a direct line and datacomm. But I too don't know a bank here in Germany which offers this service. Here in Germany Paybox offers a way which combines computer and cellular phone. Data is tranfered online and the PIN is inserted with the phone. That is certainly a save way, but even Paybox uses https - so again no solution for the hplx. There seems to be no way around a laptop. Thanks anyway. Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 22:15:30 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: SUPER MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, I have placed my complete changelog of SUPER on the whatsnew page http://www.palmtop.net/whatsnew.html If you have further suggestions or questions, let me know. I will keep maintaining SUPER. Also, here are a few links I came across while looking for new palmtop software: Project Management etc.: http://www.projectkickstart.com/html/palmtop.htm and a few games: http://people.delphi.com/rrutt/palmtop.htm Have fun! GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 16:32:20 -0600 Reply-To: Theodore Heise Sender: HPLX Mailing List From: Theodore Heise Subject: Re: homebanking with hplx In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Mon, 11 Feb 2002, Ulrich Allen wrote: > Thanks for your reply, John. > It's a pity. Is it possible to do homebanking with > Windows CE? What about Psion? > the PIN is inserted with the phone. That is certainly a > save way, but even Paybox uses https - so again no solution > for the hplx. > There seems to be no way around a laptop. Here's a thought. Recent versions of Lynx do https, so if you have access to a shell account you could use LXTCP and SSHDOS to log in to it. It's a little klunky, but ought to work. -- Ted Heise West Lafayette, IN, USA ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 22:42:44 -0000 Reply-To: "Richard E. McEvoy" Sender: HPLX Mailing List From: "Richard E. McEvoy" Subject: Re: OT: German Translation MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit No problem, Daniel, I don't have to tell you that you are 100% correct. . As you know, no native German speaker would say it any other way than Weinkellerei "kleiner Donner". But most native English speakers would say "let's meet in the "Bella Donna" restaurant. They might change the order if they know the Italian order would be Ristorante Bella Donna. Apropos of the masculine form of the adjective (which agrees with the masculine Donner), I am reminded of Mark Twain who is alleged to have said he would rather decline ten drinks than one German adjective. Richard. ----- Original Message ----- From: "Daniel Hertrich" To: Sent: Monday, February 11, 2002 6:59 PM Subject: Re: OT: German Translation > Hallo Oliver! > > On Mon, 11 Feb 2002 20:43:04 +0100, "Oliver W. Leibenguth" wrote: > > > Depends on what's little ;-) > > If it's a "little thunder" it translates as "kleiner Donner Weinkellerei". > > If it's a "little winery" it translates "kleine Donner Weinkellerei". > > Tom said, the winery is named after a lake which is called "little > thunder", so it must be "kleiner Donner", not a little winery. > > But, would you really say that in that order? "Kleiner Donner > Weinkellerei"? Sounds somewhat strange, IMO. > > Let's meet in the Bella Donna Ristorante.... no. It's the Ristorante "Bella > Donna". > > Interesting problem! :-) > > GTX > daniel > > -- > http://www.daniel-hertrich.de/contact > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 15:46:08 -0700 Reply-To: Richard and Patti Smith Sender: HPLX Mailing List From: Richard and Patti Smith Organization: Orion On-Site Computer Services Subject: FS: Computer books for sale MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello all; I have three books for sale as follows: -- "Learning Lotus 1-2-3" by Annette J. Thomason. Introductory tutorial for Lotus 1-2-3, Releases 2.0, 2.01, and version 1.A. Covers basic spreadsheet, word processing and database functions, as well as macro commands. Written with the beginning business/computer student in mind. Spiral bound. Size: approx. 7" x 9.5", 352 pages. Published by Houghton-Mifflin, copyright 1989. Asking price: $3.00, plus shipping, see below *. -- "1-2-3 from A to Z" by Marshall B. Romney, Ph.D, CPA and J. Morgan White, CPA. Introductory tutorial for Lotus 1-2-3, version 1.A. Covers basic spreadsheet, word processing and database functions, as well as macro commands. Written with the accounting or advanced business student in mind. Second Edition. Spiral bound. Published by SofTrain, copyright 1988. Size: approx. 8.5" x 11", approx. 400 pages. Asking price: $3.00, plus shipping, see below *. -- "BASIC Microcomputer Games" by David H. Ahl. The best microcomputer games from Creative Computing magazine. Includes 101 imaginative and challenging games for one, two, or more players -- basketball, craps, gomoko, blackjack, digits, bombs away, horserace, etc. Simulate lunar landings. Play the stock market. Write poetry. Draw pictures. All games come with complete step-by-step programs and sample runs. All programs, run on Microsoft 8K BASIC, Rev. 4.0 BASIC conversion table included. (May require some knowledge of current BASIC systems to work properly; but that could be an excellent learning exercise!) Published by Workman Publishing, copyright 1978. Size: approx. 8.5" x 11", 183 pages. Asking price: $1.00, plus shipping, see below *. * All monetary amounts are in U.S. dollars. All asking prices are negotiable! Please add $5.00 for shipping and handling costs (shipping via USPS Priority Mail, including insurance and tracking). CONTINENTAL UNITED STATES ONLY, PLEASE! What doesn't sell here will go to eBay, then to my Virtual Garage Sale page at the above prices. Take advantage of the opportunity now. I still have Lotus Magellan, Novell Netware and several others items for sale on my Virtual Garage Sale page at: http://seronac.freeservers.com/virtualgaragesale.html . Feel free to take a look. -- Richard & Patti Smith -- "Now is the time for all good people to come to the aid of their country" ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 19:44:31 -0500 Reply-To: "Don E. Weatherly" Sender: HPLX Mailing List From: "Don E. Weatherly" Subject: FS - HP200LX, 32MB, Single Speed. Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed For sale as a package only: - HP200LX, 32MB, Single Speed. (It's one of my backups, so it's in like new condition.) - AC adapter. - Serial cable. - Soft Case. - Otterbox hard case - Light. If you send cashiers check or postal money order, I'll sell the entire package for $460.00 including shipping/insurance (only in the US). If you prefer COD, I'll sell the entire package for $470.00 to be shipped via FedEx, insured, COD, Secured Payment (money order or cashier's check), second day delivery (only in the US). Only other accessories available at this time are cases and lights. If you are interested, please contact me OFF the HPLX mail list at weather@exis.net. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 11 Feb 2002 13:26:15 -0500 Reply-To: ccohen5 Sender: HPLX Mailing List From: ccohen5 Subject: Battery life with upgraded 200LX Comments: To: dale.n.batson@LMCO.COM MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_00B7_01C1B2FF.AE50F3B0" This is a multi-part message in MIME format. ------=_NextPart_000_00B7_01C1B2FF.AE50F3B0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I have had the same experience with the 64mb: very limited battery use, = mostly connected to a power pack at the office and home results in about = 4 weeks battery life equivalent to about 5 hours using an old equivalent = of batt log. I have much better use with my 32mb backup. BTW - I never operate with a PCMCIA card without the power pack. Colin ------=_NextPart_000_00B7_01C1B2FF.AE50F3B0 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable
I have had the same experience with the 64mb: very = limited=20 battery use, mostly connected to a power pack at the office and home = results in=20 about 4 weeks battery life equivalent to about 5 hours using an old = equivalent=20 of batt log.
 
I have much better use with my 32mb = backup.
 
BTW - I never operate with a PCMCIA card without the = power=20 pack.
 
Colin
------=_NextPart_000_00B7_01C1B2FF.AE50F3B0-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 02:25:05 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: GARLIC & Appointment Database? Comments: To: rob@rclewis.com MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > Just noticed (while trying to shorten my appt database) that there is a > 'record missing' and the operaition did not complete. As the database is > getting too large to be fast, I really need to shorten it. Is GARLIC the > best way to do this or is there another way? Will GARLIC work with the > APPT database or only with other user-defined files? Thanks. Whatever you do, use GARLIC on a copy of the file and see how that goes. If it fixes it, check it out and only when assured the file is okay, erase the original. Sometimes going manually through the file will find the offending record. Good luck ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 16:50:07 +1100 Reply-To: Russell Hemery Sender: HPLX Mailing List From: Russell Hemery Subject: Current draw info? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Hi all Does anyone know what current the LX draws? Off mode On Writing to/from a flash card Modem use Just wondering how applicable the battery shootout info might be to the LX. TIA Russell ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 16:47:11 +1100 Reply-To: Russell Hemery Sender: HPLX Mailing List From: Russell Hemery Subject: Re: homebanking with hplx In-Reply-To: <3C67B402.3848.1013300@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" At 12:07 PM 11/02/02 -0600, you wrote: >Nowadays it seems like all the home banking is web based and needs a secure >browser. Citibank used to have dialup banking using a dos program which I still >have but discontinued it in favor of the web. The 200LX does not have a https >browser and nobody seems to want to write one so it looks like it is out for home >banking. I have read of some people using datacomm to access their account but >have never found a bank with that kind of access. I would love to do home banking >with billpay with the LX- it is one reason I own a laptop (so I can pay my bills while >traveling), but since Citibank I just haven't found a bank that supports it and dos. > >John > >On 11 Feb 2002 at 12:16, Ulrich Allen wrote: > >> Obviously homebanking is not of much interest to the >> list - or is there no solution? There is always a solution :) In the good old BBS days we were able to "instruct" the BBS to do all sorts of things for us. What is the possibility of setting up a web site that will then "translate" data to/from the LX? The only issue here I see would be security between the web site and the LX. I'm sure there are security fixes possible, like zipping the data to be sent to the web site with a password and having the web site unzip, send via https to the bank and reverse in reply. Am I farting into a hurricane here or is something like this customisable for each bank? The idea in a nutshell is to place a "translation website" that does not need https between the bank and the LX. In this way I believe transactions might even be able to be done via emails. Regards Russell ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 10:37:04 +0100 Reply-To: Ulrich Boche Sender: HPLX Mailing List From: Ulrich Boche Subject: Re: homebanking with hplx Comments: To: Ulrich Allen MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="=_alternative 0034B1F7C1256B5E_=" This is a multipart message in MIME format. --=_alternative 0034B1F7C1256B5E_= Content-Type: text/plain; charset="us-ascii" On Monday, 11.02.2002 at 12:16 EST, Ulrich Allen wrote: > I am missing a way to do some homebanking with > the hplx. Since access to btx 01910 was stopped > here in Germany, I don't know any way even to get > the state of my bankacount. > Are there any ideas to how to get some bankacount > figures with the hplx? > To my knowledge, access to "T-Online Classic" via the 0191011 access number is still possible for home banking programs. I stopped using this type of access late last year and switched to HBCI when I got a T-DSL connection with a router. Whether you can find a program that runs on the HP 200 LX to access T-Online Classic in the way needed for home banking applications is yet another question. I can't really be of help because I've always used PC-based home banking programs such as "PC Cash" or "Profi Cash". Some browsing on the HP and Microsoft web pages revealed the following for handheld PCs: the HP Jornada 720 (and possible other models, I haven't checked) runs the "Microsoft Windows for Handheld PC 2000" operating system, the successor to Windows CE. This comes with "Microsoft Internet Explorer for Handheld PC (version 4.01)" as its web browser. On the MS web pages, I found the specifications for version 4.02 which specify support for: Secure Sockets Layer (SSL) 2, SSL3, SGC (Server Gated Cryptography) So the answer is: yes, a pocket PC would allow you to do home banking if a browser with SSL support is all you need. Ulrich Boche --=_alternative 0034B1F7C1256B5E_= Content-Type: text/html; charset="us-ascii"
On Monday, 11.02.2002 at 12:16 EST, Ulrich Allen <Ulrich.Allen@GMX.DE> wrote:
> I am missing a way to do some homebanking with
> the hplx. Since access to btx 01910 was stopped
> here in Germany, I don't know any way even to get
> the state of my bankacount.
> Are there any ideas to how to get some bankacount
> figures with the hplx?
>
To my knowledge, access to "T-Online Classic" via the 0191011 access
number is still possible for home banking programs. I stopped using this
type of access late last year and switched to HBCI when I got a T-DSL
connection with a router.

Whether you can find a program that runs on the HP 200 LX to access
T-Online Classic in the way needed for home banking applications is
yet another question. I can't really be of help because I've always used
PC-based home banking programs such as "PC Cash" or "Profi Cash".

Some browsing on the HP and Microsoft web pages revealed the
following for handheld PCs: the HP Jornada 720 (and possible other
models, I haven't checked) runs the "Microsoft Windows for Handheld PC 2000"
operating system, the successor to Windows CE. This comes with
"Microsoft Internet Explorer for Handheld PC (version 4.01)" as its
web browser. On the MS web pages, I found the specifications for
version 4.02 which specify support for:

Secure Sockets Layer (SSL) 2, SSL3, SGC (Server Gated Cryptography)

So the answer is: yes, a pocket PC would allow you to do home banking
if a browser with SSL support is all you need.

Ulrich Boche
 --=_alternative 0034B1F7C1256B5E_=-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 10:40:09 +0100 Reply-To: Ulrich Boche Sender: HPLX Mailing List From: Ulrich Boche Subject: Re: GARLIC & Appointment Database? Comments: To: rob@rclewis.com MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="=_alternative 0034FA39C1256B5E_=" This is a multipart message in MIME format. --=_alternative 0034FA39C1256B5E_= Content-Type: text/plain; charset="us-ascii" On Monday, 11.02.2002 at 12:41 CST, robert c lewis wrote: > Just noticed (while trying to shorten my appt database) that > there is a > 'record missing' and the operaition did not complete. As > the database is > getting too large to be fast, I really need to shorten it. > Is GARLIC the > best way to do this or is there another way? Will GARLIC > work with the > APPT database or only with other user-defined files? > Thanks. > You could try to create a new, empty appointment database and merge the entries you want to keep into it. If it works, it is the easiest way to clean up a database. Ulrich Boche --=_alternative 0034FA39C1256B5E_= Content-Type: text/html; charset="us-ascii"
On Monday, 11.02.2002 at 12:41 CST, robert c lewis <rc-lewis@STUDENTS.UIUC.EDU> wrote:
> Just noticed (while trying to shorten my appt database) that
> there is a
> 'record missing' and the operaition did not complete.   As
> the database is
> getting too large to be fast, I really need to shorten it.  
> Is GARLIC the
> best way to do this or is there another way?  Will GARLIC
> work with the
> APPT database or only with other user-defined  files?  
> Thanks.
>
You could try to create a new, empty appointment database
and merge the entries you want to keep into it. If it works,
it is the easiest way to clean up a database.

Ulrich Boche
 --=_alternative 0034FA39C1256B5E_=-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 14:15:10 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Ulrich Allen wrote: > It's a pity. Is it possible to do homebanking with > Windows CE? What about Psion? I know it can be done with Palms, because PalmOS 4.0 has https built in as one web clipping feature. I also use BTX, and it still works for me, but my appointment book has an entry at the 5-Mar-2002, saying: last day of BTX. I also checked for alternatives, and found Opera on the laptop as the best replacement. No banking module needed, In my case (Postbank), I just go to https://www2.postbank-banking.de From there I have to log in and can do everything just like under BTX, indeed not on the Palmtop, but cheaper, because I only pay the online time and not the extra BTX fee. Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 09:02:22 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: AA Batteries Shoot-Out MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Sidney Ho wrote: > For us battery fanatics, I came across this interesting > (and ongoing) shoot out for most durable batteries on > a digital imaging site. HPLX users will find it a very > useful reference. Note that batteries are up to > 1700-1800 mAh and type of chargers make a lot of > difference. I wonder how helpful these tests are for the 200lx use of batteries. He points out that the tests don't reflect the usage of cameras which use power in a few big gulps. The 200lx use is probably a lot steadier than that of a camera but it has it's own big gulps when writing to flash memory. That's the same thing that causes big gulps in cameras, I think. He also shows alkalines as having about half the potential as nimh. I do know alkalines aren't much good for cameras. They can't handle the big gulps. But I thought that they would outlast the nimh batteries. My Kodak DC280 came with both alkaline and nimh batteries. Presumably the alkalines are for use while you're charging the nimh. But they don't work well at all. After 4 or 5 pictures taken within a few minutes of each other I get a dead battery indication. They aren't dead but they got low enough temporarily that the camera thinks they are. Turning the camera off and back on fixes this just fine until the next time. I now use 1600 mah nimh batteries in my 200lx after years of using Walgreen's alkalines and, without testing, my impression is that the alkalines last about 50% longer than a charge of the nimh batteries. The test seems to show them lasting half as long. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 09:11:27 -0600 Reply-To: jmusielewicz@earthlink.net Sender: HPLX Mailing List From: John Musielewicz Subject: Re: Current draw info? In-Reply-To: <3.0.6.32.20020212165007.00b03cd0@pop.powerup.com.au> MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT On 12 Feb 2002 at 16:50, Russell Hemery wrote: > Hi all > > Does anyone know what current the LX draws? > > Off mode 2 mA > On 25 mA > Writing to/from a flash card Depends on the flash card I think but the measurements I took with a 448 MB SiliconTech were about 150 mA peak reading and writing. > Modem use > > Just wondering how applicable the battery shootout info might be to the LX. > > TIA > > Russell > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 09:54:15 -0600 Reply-To: TomSalwasser@COMPUSERVE.COM Sender: HPLX Mailing List From: Tom Salwasser Subject: wanted: damaged lx MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hello! I'm looking for a bargain on an lx, model and memory amount open. Broken hinge is ok. Minor screen problems ok. Minor keyboard problems ok. Everything else must be functional, especially the serial port. This unit will be used in an embedded application and will be accessed infrequently but running continuously. Does anyone have one of these? Regards, Tom Salwasser ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 17:28:48 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Current draw info? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi John On Tue, 12 Feb 2002 09:11:27 -0600, John Musielewicz wrote: > > Off mode > > 2 mA > > > On > > 25 mA Where did you measure that? At the batteries or at the AC? GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 11:28:25 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Around The World Info Comments: To: Victor Roberts MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Victor Roberts wrote: > Perhaps Fred and I are related in some distant way > Scary thought. Certainly is! I feel the chill already (and I am in SoCal where temps today are waaaay summery!) Question is who should be scared - you, Fred, or us? Noticed you enumerated other places you lived in and I realie that my next address will be the 50th address in my life. Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 11:28:27 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Nokia 3360 Comments: To: fjkaufman@WORLDNET.ATT.NET MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hi Fred, > > Hi Fred > > > > >>So I guess that if the AT&T cell phone has an email address, I > > > > I believe att cell phones all have an email address it is the 10 = digit > > number @att.net > > Actually, the message I got from Avi, shows: > > 99999....@mobile.att.net Good! It does not send my cellphone number, or maybe Compuserve obscures it. > I replied from the desktop where it arrived and we shall see if he gets > the reply. He did! It arrived with FROM containing your Compuserve id. > I also then added his "address" to my phone and sent a message to that > address. The message alone did NOT arrive. > While it was "sent" (from verizon to ATT), I have not received the > confirmation beep. So maybe these carriers purposely lock each other > out??? As others wrote, it seems common that no inter-carrier "SMS" is possible. > The typing of messages on the phone-keypad > is tedious, altho, the absence of easy upper/lower case should make My Nokia 8260 has this "predictive typing" thingie (I think it is called T9?). You just hit the number of the letter you intend, and in 90% or more of times, it will figure out which letter of the 3 or 4 assigned to the key you actually want. It will even use the remainder of the word to refine its guess and change previous letters, even if they were modified already by this progressive guessing scheme.. So typing is not slowed down by having to press several times each key to reach the proper lettr. Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 11:28:28 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: cc:mail and Yahoo? Comments: To: TCU549@AOL.COM MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Kat, your Subject says: Subject: cc:mail and Yahoo? > How is this done? Using WWW/LX? I think there is a mixhere of too many things. cc:Mail is a self standing email package, much as WWW/LX is. It connects to a specific type of an email server. This server is not a typical Internet email server which WWW/LX works with. AFAIK, there is one such service surviving - check on www.palmtop.net (I think the URL is correct.). The cc:Mail code is buried inside the 200LX chip, making it goo in that it takes no memory space for the program itself, but much more difficult to update and fix, if necessary (need to replace the 200LX programmed chip.) Yahoo mail boxes are of the Internet type, i.e. the message are received by POP3 server and sent out by a SMTP server. These interactions use a protocol called TCP/IP (and a host of others for some of the more detailed work.) AFAIK, cc:Mail has no TCP/IP capabilities. So cc:Mail does not know how to use Yahoo. WWW/LX is a TCP/IP "engine" - it "speaks" this protocol fluently. It can be made to tal with Yahoo mailbox, but you must adjust the Yahoo mailbox to accept Yahoo's junk mail. I posted in the last 2-3 days a detailed description of what to do to Yahoo, and to WWW/LX to make the two talk. (this address, hplxmail@yahoo.com, is a Yahoo mailbox adjusted thusly, and I use it via WWW/LX.) Lastly, the cc:Mail message management is part of the program which is embedded on the 3MB 200LX program chip (separate from the CPU chip!) It would have been very nice if we knew where and how to hook into that hard-embedded program to use some of its processes to save memory in our own WWW/LX program. Unfortunately, we do not have access to those embedded programs. Hope I could clarify some of the fog, without raising many more puzzles for you! Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 11:28:30 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Nokia 3360 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hi Fran=E7ois: > > any special service to get browsing to work? They call it SMS, > > but is it really the same service as is known on the GSM > > phones? (as I understand it, GSM phones can send short > > messages to any other gsm phone, regardless of service > > provider, but with AT&T SMS I can only send messages to other > > AT&T customers.) > > this is a feature of your service provider and not the handset. > some providers, Indeed that is what I surmise. The service providers do not cooperate to let me send "SMS" to another providers customers. > in some areas, restrict sms messages destined to > gateways not in their own system. i know voicestream in nyc does > not allow off-network sms at this time, but on other networks, my > 8290 and 3390 have worked fine. i'm just a user of these things > so don't take my word as canon :) 3390 is a GSM phone, I am talking about 3360, a TDMA phone. > Somehow or another, i never got to owning a copy of www/lx, so i > cannot say whether the 33x0 works well with the hplx. And that's a shame! get one, soon! :-) > i haven't found many features of the 33x0 i prefer over the 82x0, > and it seems to be drop-in compitable with my laptop's 8290 ir setup. > i'm almost not very familiar with the differences between the 3390 > and 3360 (i know the 8290 and 8260 have different placement of the > handsfree socket, but featurewise they're the same afaict). i do > think the 33x0 feels sturdier, but i won't be giving up my 8290 > anytime soon, unless of course, i can pick up an 8890 without going > broke. Except: 3360 has an internal modem, and 8260 does not. 3360 has an IR and 8260 does not. My very basic question is if anyone used 3360 with WWW/LX over the IR. Thanks for feedback. Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 10:38:42 -0600 Reply-To: jmusielewicz@earthlink.net Sender: HPLX Mailing List From: John Musielewicz Subject: Re: Current draw info? In-Reply-To: MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT On 12 Feb 2002 at 17:28, Daniel Hertrich wrote: > Hi John > > On Tue, 12 Feb 2002 09:11:27 -0600, John Musielewicz wrote: > > > > Off mode > > > > 2 mA > > > > > On > > > > 25 mA > > Where did you measure that? At the batteries or at the AC? All measurements were from the batteries. > > GTX > daniel > > -- > http://www.daniel-hertrich.de/contact > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 12:20:26 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable What is Lynx and where can I find it? I'd like to give that a try. Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 18:33:18 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: homebanking with hplx In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable On Tue, 12 Feb 2002, Ulrich Allen wrote: > What is Lynx and where can I find it? > I'd like to give that a try. Lynx is a text-mode web browser. I know of others that have a better looking (links and w3m for example). They were primarily written for Unix systems, but I know there has been a port of Lynx for 32-bit DOS. Latest versions of Lynx, links and w3m have some support of HTTPS (HTTP over SSL), but I don't think they're able to present a client certificate (I might be wrong, though). The support of SSL is performed by the OpenSSL toolkit, and I doubt it will compile under plain 16-bit DOS with very specific TCP and IP stacks such as those we get on the HP200. I managed to compile it without the socket support for 32-bit DOS (with DJGPP) to do crypto stuff, but it was an old version (SSLeay, in fact). You can find Lynx on http://lynx.isc.org --=20 Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- ha bon donc d=E9s qu'on ose faire la promotion de l'annonymit=E9e on deviens un criminel et un filtre de plus -+- Y63 in: GNU - Faf, con, trouillard et fier de l'=EAtre -+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 12:36:28 -0500 Reply-To: "Striegel, Alan" Sender: HPLX Mailing List From: "Striegel, Alan" Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C1B3EB.CD5B8C60" This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C1B3EB.CD5B8C60 Content-Type: text/plain; charset="iso-8859-1" >From: Ulrich Allen İmailto:Ulrich.Allen@GMX.DE¨ >Sent: Tuesday, February 12, 2002 12:20 PM > >What is Lynx and where can I find it? >I'd like to give that a try. http://lynx.browser.org/ "Lynx is a text browser for the World Wide Web. Lynx 2.8.3 runs on Un*x, VMS, Windows 95/98/NT but not 3.1 or 3.11, on DOS (386 or higher) and OS/2 EMX. The current developmental version is also available for testing. Ports to Mac are in beta test. How to get Lynx, and much more information, is available at Lynx links. Many user questions are answered in the online help provided with Lynx. Press the '?' key to find this help. If you are encountering difficulty with Lynx you may write to lynx-dev@sig.net. Be as detailed as you can about the URL where you were on the Web when you had trouble, what you did, what Lynx version you have (try '=' key), and what OS you have. If you are using an older version, you may well need to upgrade." I use a version under OpenVMS on a system run by Encompass. You can probably still sign up for free by telnetting to eisner.decus.org and logging in as Registration. Alan Striegel ------_=_NextPart_001_01C1B3EB.CD5B8C60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable RE: homebanking with hplx

>From: Ulrich Allen İmailto:Ulrich.Allen@GMX.DE¨
>Sent: Tuesday, February 12, 2002 12:20 PM
>
>What is Lynx and where can I find it?
>I'd like to give that a try.

http://lynx.browser.org/

"Lynx is a text browser for the World Wide = Web.     Lynx 2.8.3 runs on Un*x, VMS, Windows = 95/98/NT but not 3.1 or 3.11, on DOS (386 or higher) and OS/2 = EMX.  The  current developmental version is also available = for testing.  Ports to Mac are in beta test.


How to get Lynx, and much more information, is = available at  Lynx links.
Many user questions are answered in the  online = help provided with Lynx. Press the '?' key to find this help.
If you are encountering difficulty with Lynx you may = write to lynx-dev@sig.net.  Be as detailed as you can about the = URL where you were on the Web when you had trouble, what you did, what = Lynx version you have (try '=3D' key), and what OS you have.  If = you are using an older version, you may well need to = upgrade."

     I use a version under = OpenVMS on a system run by Encompass.  You can probably still sign = up for free by telnetting to eisner.decus.org and logging in as = Registration.

Alan Striegel

------_=_NextPart_001_01C1B3EB.CD5B8C60-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 12:01:08 -0600 Reply-To: Theodore Heise Sender: HPLX Mailing List From: Theodore Heise Subject: Re: homebanking with hplx In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Tue, 12 Feb 2002, Erwann ABALEA wrote: > Latest versions of Lynx, links and w3m have some support of HTTPS (HTTP > over SSL), but I don't think they're able to present a client certificate > (I might be wrong, though). I don't know if a certificate is involved (I suppose not), but I *was* able to log into my Paypal account with Lynx. Ted -- Ted Heise West Lafayette, IN, USA ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 13:03:39 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Stephan wrote: > > I also use BTX, and it still works for me, but my appointment > book has an entry at the 5-Mar-2002, saying: last day of BTX. > But that would mean that I can't use Quicken via btx anymore. I was told that homebanking with t-online classic will go on. Even in the new t-online version 4.0 it is implemented. I hope you are not right here Stephan. Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 19:17:24 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends On Tue, 12 Feb 2002 18:33:18 +0100, Erwann ABALEA wrote: > Lynx is a text-mode web browser. I know of others that have a better > looking (links and w3m for example). They were primarily written for Unix > systems, but I know there has been a port of Lynx for 32-bit DOS. I just tried to do a little homebanking with Lynx. It's a pity. https does indeed work here on my Linux box, and I even could connect to my accout after entering account number and so on, but since the web interface of my bank (Deutsch Bank 24) uses frames, lynx has big problems displaying it and all the Javascript and Java-driven stuff doesn't work anyway. If you want to try Lynx: I have set up a new user account on my Linux box, which you all can use for a short period of time. I will delete this user account soon, and I have a dynamic IP anyway, so connecting to my Linux box is not that easy. ;-) I will keep it online this evening (MET) for about 3 hours from now on. How to try Lynx: telnet 217.231.200.117 (that's my Linux box at the moment) login: lynx password: lynx then type the command "lynx". Lynx will start and display its welcome screen. Then type g (for "goto") and enter the URL of your bank or whatever https site you want to try. If the page contains frames, lynx shows a list of the frame titles. Mostly something like "navigation", "contents" or so. Jump from link to link with the cursor keys and press enter to follow a link or to display the contents of a frame. DON'T download huge files, because I have a volume-limited flat rate! I will watch the traffic going over my computer! (But of course I won't spy out any private things of you like bank basswords or so ;-) ) And remember I will shut down this "service" in about three hours - at 10pm MET. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 05:33:14 +1100 Reply-To: Russell Hemery Sender: HPLX Mailing List From: Russell Hemery Subject: Goalset.gdb Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Hi I was wondering if someone might be kind enough to send me a copy of Goalset.gdb. It is apparently available on HPHand or PTP On Disk Jan/Feb 1995 issue 19. I dont have access to either of these resources. For those interested Goalset is associated with a time management article at http://www.palmtoppaper.com/ptphtml/19/pt190025.htm Regards Russell ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 20:25:57 +0100 Reply-To: Etienne Lemaire Sender: HPLX Mailing List From: Etienne Lemaire Subject: Re: Goalset.gdb Comments: To: Russell Hemery MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_002B_01C1B403.7A2F3420" This is a multi-part message in MIME format. ------=_NextPart_000_002B_01C1B403.7A2F3420 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Here it is Enjoy Etienne (replying to the list alson so you don't get too many ----- Original Message ----- From: "Russell Hemery" To: Sent: Tuesday, February 12, 2002 07:33 PM Subject: Goalset.gdb | Hi | | I was wondering if someone might be kind enough to send me a copy of | Goalset.gdb. It is apparently available on HPHand or PTP On Disk Jan/Feb | 1995 issue 19. | | I dont have access to either of these resources. | | For those interested Goalset is associated with a time management article | at http://www.palmtoppaper.com/ptphtml/19/pt190025.htm | | Regards | | Russell | | ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml | | ------=_NextPart_000_002B_01C1B403.7A2F3420 Content-Type: application/octet-stream; name="GOALSET.GDB" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="GOALSET.GDB" aGNEAAAAGQAAAAIBRAAAAB4ApQgAAF4KFl4EyHsEAqoBAAAGAAAAAgANAKoACwAAAAAAAAT//wYA AACoAA0AqgALAAAAAAAABP//BgAAAFYBDQB4AAsAAAAAAAAE//8GAAAA3gENAKAACwAAAAAAAAT/ /wEAAAACABoAegIPAFgAAQAAAP//AQAAAAIALABKAA8ACwABAAAA//8BAAAAUAAsAOAADwAQAAEA AAD//wEAAAAyASwAhgAPAAsAAQAAAP//BQAAALwBLQDCAAwAAQAAAAAA//8HAAAAAgA+AHkCHgAB AAAAAAD//wIAAAAGAEwAaAAMAAEAAAAAAAkAAgAAAHQATABKAAwAAgAAAAAACQACAAAAwgBMAF4A DAADAAAAAAAJAAIAAAAkAUwASgAMAAQAAAAAAAkAAgAAAHIBTABoAAwABQAAAAAACQACAAAA4gFM AEAADAAGAAAAAAAJAAIAAAAqAkwASgAMAAcAAAAAAAkAAQAAAAIAXwB6Ag8AUgABAAAA//8GAAAA WgBwADIACwAAAAAAAAT//wYAAAA0AnAAKAALAAAAAAAABP//EX0uYwIAfAB2AjsAUwAAAAAA//8G Ah8AAAAMAAAAgAAAR09BTFNFVDogUHJvamVjdCAABgIfAAEADAAAAIAAAFBsYW5uaW5nIERhdGFi YXNlAAYCGgACAAwAAACAAABieSBUYWQgSmFtZXMABgIeAAMADAAAAIAAAFBoOig4MDApODAwLU1J TkQABgISAAQAAgAAACAAAEdvYWwABgISAAUAAgACACAAACZBZ2UABgIbAAYAAgAEACAAACZEYXRl IEFjY29tcC4ABgIXAAcAAgAGACAAAFAmcmlvcml0eQAGAiAACAABAAgAAAEAJkVudCdkIGluIENh bGVuZGFyAAYCHQAJAAsAAACAAABMZW5ndGggb2YgJlRpbWUABgIWAAoACQAKAAABADEwIFllYXJz AAYCEwALAAkACgAAAgBTaXhZcgAGAhUADAAJAAoAAAMAVGhyZWVZcgAGAhMADQAJAAoAAAQAT25l WXIABgIWAA4ACQAKAAAFADYgTW9udGhzAAYCEgAPAAkACgAABgAzIE1vAAYCEwAQAAkACgAABwBP bmVNbwAGAhcAEQACAAwAIAAAJkxhc3RTdGVwAAYCEwASAAwAAACAAABFdmVudAAGAhIAEwAMAAAA gAAARGF0ZQAGAhYAFAAKAA4AAAAAJlByb2plY3QABwJiAAAAAAAAAAIAAEFsbCBEYXRhYmFzZSBJ dGVtcwAAAAAAAAAAAAAAAAAABwD/////AQAAAAAABwoEKQYJCAT/AAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAD/AAAMAhwBAADyAAIAQWxsIEZpZWxkcwAAAAAAAAAAAAAAAAAAAAAAAAAAAABH b2FsOiD/CkBvAAYEAAEJ/w0KQWdlOiD/CkBvAAUFAAEJ/w0KRGF0ZSBBY2NvbXAuOiD/CkBvAA4G AAEJ/w0KUHJpb3JpdHk6IP8KQG8ACgcAAQn/DQr/CkBvABMIAAEJ/w0KTGVuZ3RoIG9mIFRpbWU6 IP8KQG8ACgoAAQn//wpAbwAHCwABCf//CkBvAAkMAAEJ//8KQG8ABw0AAQn//wpAbwAKDgABCf8N Cv8KQG8ABg8AAQn//wpAbwAHEAABCf8NCkxhc3RTdGVwOiD/CkBvAAoRAAEJ/w0KUHJvamVjdDog /wpAbwAJFAABCf8NCgkCoQEAAE1lbW9zIHRvIE1hbmFnZXJzIEFib3V0IHRoZSBQbGFuICAgICAg ICAgICAgIDExLzMwLzk0DQpNZWV0IHdpdGggdGhlIE1hbmFnZXJzICYgRGlzY3VzcyBJZGVhcyAg ICAgICAxMi8xNS85NA0KV3JpdGUgdGhlIE91dGxpbmUgICAgICAgICAgICAgICAgICAgICAgICAg ICAgMTIvMzAvOTQNCkZpcnN0IERyYWZ0IE91dCBmb3IgQ29tbWVudHMgICAgICAgICAgICAgICAg IDAxLzMxLzk0DQogICAgICAgICAgICAgICAgICAobW9yZSkNCkNvbW1lbnRzIER1ZSAgICAgICAg ICAgICAgICAgICAgICAgICAgICAgICAgIDAyLzE1Lzk0DQpGaW5hbCBSZXZpc2lvbnMgRG9uZSAg ICAgICAgICAgICAgICAgICAgICAgICAwMi8yOC85NA0KUHJpbnQgRmluYWwgVmVyc2lvbiBvZiB0 aGUgUGxhbiAgICAgICAgICAgICAgMDMvMDEvOTQNCgsCZQAAABEAKwAuADUAAAAGADgAAAAAQ3Jl YXRlIE5ldyBNYXJrZXRpbmcgUGxhbgA0MQAzLzEvOTUAQTIAUHJpbnRpbmcgdGhlIEZpbmFsIFZl cnNpb24gb2YgdGhlIFBsYW4ACQIcAQEAR2V0IGEgUmVhbHRvciAgICAgICAgICAgICAgICAgICAg ICAgICAgICAgICAgIDEyLzE1Lzk1DQpMb29rIGF0IEF2YWlsYWJsZSBTcGFjZSAgICAgICAgICAg ICAgICAgICAgICAgMDEvMTIvOTUNCkRlY2lkZSBvbiB0aGUgU3BhY2UgICAgICAgICAgICAgICAg ICAgICAgICAgICAwMy8yMi85NQ0KU2lnbiB0aGUgTGVhc2UgICAgICAgICAgICAgICAgICAgICAg ICAgICAgICAgIDA0LzIyLzk1DQpNb3ZlIEluICAgICAgICAgICAgICAgICAgICAgICAgICAgICAg ICAgICAgICAgMDUvMjIvOTULAk0AAQARACcAKgAyAAEABQA1AAEAAEZpbmQgTmV3IE9mZmljZSBT cGFjZQA0MQA1LzIyLzk1AEExAFdlIFNpZ24gdGhlIExlYXNlAAoCCgAAAAEAAAAfAPYAAAAZAP// AAQAAKoB/v8AHQAAHwD+/wDHAQAfAP7/AOYBABoA/v8ABQIAHgD+/wAfAgASAP7/AD0CABIA/v8A TwIAGwD+/wBhAgAXAP7/AHwCACAA/v8AkwIAHQD+/wCzAgAWAP7/ANACABMA/v8A5gIAFQD+/wD5 AgATAP7/AA4DABYA/v8AIQMAEgD+/wA3AwATAP7/AEkDABcA/v8AXAMAEwD+/wBzAwASAP7/AIYD ABYA/v8AmAMAYgD+/wCuAwChAf7/ACwFABwB/v8AMgcACgD+/wCbCABlAP7/AM0GAE0A/v8ATggA HAH+/wAQBAAAAAEAAQABAAEAAgACABcAGAAYABoAGwAdAB4AHgAeAB4AHgAeAB4AHgAeAB4AHgAe AB4AHgAeAB4AHgAeAB4A ------=_NextPart_000_002B_01C1B403.7A2F3420-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 14:59:18 -0500 Reply-To: Eduardo Seudsnimo Sender: HPLX Mailing List From: Eduardo Seudsnimo Subject: Re: cc:mail and Yahoo? In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Actually, I think some dude wrote a piece that bridges the gap between = CC:mail and POP mailboxes. I forget how it works... is it part of = post/lx? I think it takes the pop mail messages and sticks them into = your CC:mail inbox. It also takes outgoing mail and sends through it = SMTP. I remember there was hesitation on the part of a lot of LX = developers because they thought Lotus would sue if you wrote code to = read/write CC:mail files but some dude went and did it anyway. Kat, your Subject says: Subject: cc:mail and Yahoo? > How is this done? Using WWW/LX? Avi said: >>I think there is a mixhere of too many things. cc:Mail is a ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 21:13:27 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Fwd: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, Ted wrote to me in private --- begin of forwarded message --- Very generous offer. I recently set up a Linux box (Red Hat 7.2) and just wanted to make sure you knew about the insecure nature of telnet. Passwords (even the root password if you su) are sent over the net in cleartext using telnet. Ssh is the suggested method, if I understand things right. --- end of forwarded message --- ..and is of course totally rgiht about that! DON'T connect via telnet to my Linux box if you want to try out homebanking! telnet would indeed transmit passwords in clear text over the Internet. So, instead of using telnet, use ssh! ssh 217.231.200.117 or ssh lynx@217.231.200.117 Thanks, Ted! GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 21:18:25 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: cc:mail and Yahoo? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Eduardo On Tue, 12 Feb 2002 14:59:18 -0500, Eduardo Seudsnimo wrote: > Actually, I think some dude wrote a piece that bridges the gap between CC:mail and POP mailboxes. I forget how it works... is it part of > post/lx? I think it takes the pop mail messages and sticks them into your CC:mail inbox. It also takes outgoing mail and sends through it > SMTP. I remember there was hesitation on the part of a lot of LX developers because they thought Lotus would sue if you wrote code to > read/write CC:mail files but some dude went and did it anyway. Yes, I think you mean ccLXPOP. It lets you use ccMail with Rod Whitby's LXTCP. Available on SUPER. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 22:08:47 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Internet links MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, here are a few Internet links which you should check out. I occasionally do google searches on various palmtop-related keywords or keyword combinations to find valuable info which is not very well known (yet) by all of us. This is what I have found today. Many of you may know some of these pages already. But some don't certainly: http://members.aol.com/FreeWhL44/lxdemo.html http://www.wrotniak.net/hplx/ http://informatics.caregroup.harvard.edu/people/Daniel/favorites.htm http://tlienhard.com/hp/ http://home.no.net/~resoerli/salg/hp700lx.html ftp://ftp.cc.monash.edu.au/pub/palmtop/ (check out inetdos for example!) http://www.hantz.de/ASP/NewProducts/Produkte_3.asp?ProduktID=85&CID=0 (the same as the Accurite Doubleslot?) And for Germans: Have fun with the automatic google translation of Stephan Luettjohann's Homepage (Sorry Stephan, it was so funny that I couldn't resist! ;-) ). The following URL is very long and if it is wrapped by my or your mail reader, simply put it in one line again. http://translate.google.com/translate?hl=de&sl=en&u=http://eddy.uni-duisburg.de/stephan/palmtop.htm&prev=/search%3Fq%3Dpalmtop%2Blx%26start%3D70%26hl%3Dde%26sa%3DN GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 00:49:34 +0100 Reply-To: Axel Berger Sender: HPLX Mailing List From: Axel Berger Subject: Charging again MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, I'm new here but I have read a lot of FAQs and three months back logs of this forum. Charging is always a topic but this question seems not to have come up: In the ROM and the default AUTOEXEC.BAT of the 700 LX there is a SMARTCHG.COM, which unlike a .COM and like a .BAT is evoked by CALL. There is no documentation whatever to be found anywhere. The reason I'm asking is, I am very much afraid I'm continually overcharging my batteries. The oldish Nokia 2110 needs to be recharged at least daily and I do that every night in the HP's cradle. Also charging is started every time the adaptor is plugged in during use. This will always pump 600 mAh at 100 mA into cells that often are nearly full. Even a constant 45 mA is way more than is good or even acceptable for them. From its description ABC too falls way short of what is considered a safe shutoff criterion for charging - keeping on 20 minutes after there is no more rise is far longer than shutting off immediately when, due to heating, voltage has dropped half a percent from the top. It seems I have already cooked the first pair of batteries - in an external charger they showed high internal resistance. BTW I agree that frequently changing batteries is a bad idea - bound to break the cover very soon if I am doing it and inconvenient too. So: 1) Is there any info about SMARTCHG? 2) Which is the best charge monitoring programm around? Danke Axel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 17:23:01 -0800 Reply-To: patrick@west.net Sender: HPLX Mailing List From: Patrick West Subject: Re: cc:mail and Yahoo? In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I used ccLXpop for regularly with Yahoo till last May when I= moved to cable modem and no longer had a dialup account. "ccLXPOP is a program to utilize the LXPOP utilities written by= Rod Whitby with ccMail." Worked very nicely. >cc:Mail has no >TCP/IP capabilities. So cc:Mail does not know how to use Yahoo. -- Patrick West, francis_patrick_west@yahoo.com on 02/12/2002 _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 15:54:13 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: email->sms MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit From Vodafone NZ I cannot send an SMS directly to France Telecom (Itineris). An email->sms gateway might be a way around this. Any recommendations? - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 06:24:53 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: FLUFF: Al Chin in America MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit couldn't resist :) ... Al Chin, the new student It was the first day of school in the US and a new student named Al Chin, the son of a Chinese businessman, entered the fourth grade. He whacked out his trusted palmtop and opened a GDB of his favorite quotes. The teacher said, "Let's begin by reviewing some American history. Who said 'Give me Liberty, or give me Death?' She saw a sea of blank faces, except for Al Chin, who had his hand up."Patrick Henry, 1775", he said. "Very good! Who said 'Government of the people, by the people, for the people, shall not perish from the earth'? Again, no response except from Al Chin: "Abraham Lincoln, 1863", said Al Chin. The teacher snapped at the class, "Class, you should be ashamed. Al Chin, who is new to our country, knows more about its history than you do." She heard a loud whisper: "Fuck the Chinks." "Who said that?" she demanded. Al Chin put his hand up. "Lee Iacocca, 1982." At that point, a student in the back said, "I'm gonna puke." The teacher glares and asks "All right! Now, who said that?" Again, Al Chin says, "George Bush to the Japanese Prime Minister, 1991." Now furious, another student yells, "Oh yeah? Suck this!" Al Chin jumps out of his chair waving his hand and shouts to the teacher, "Bill Clinton to Monica Lewinsky, 1997!" Now with almost a mob hysteria someone said, "You little shit. If you say anything else, I'll kill you." Al Chin frantically yells at the top of his voice, "Gary Condit to Chandra Levy, 2001." The teacher fainted while Al Chin closed his HPLX, and as the class gathered around the teacher on the floor someone said, "Oh shit, we're fucked", and Al Chin whispered: "The Taliban, 2001." ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 08:13:17 +0100 Reply-To: radek.svagr@LGPHILIPS-DISPLAYS.COM Sender: HPLX Mailing List From: Radek Svagr Subject: OT Re: email->sms MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Not an email-sms, but may help: WWW.MTNSMS.COM it can send nearly all networks around the world. Needs registration. Radek Tony Hutchins cc: (bcc: Radek Svagr/HRC/COMP/PHILIPS) Sent by: HPLX Subject: email->sms Mailing List 2002-02-13 04:54 PM Please respond to Tony Hutchins From Vodafone NZ I cannot send an SMS directly to France Telecom (Itineris). An email->sms gateway might be a way around this. Any recommendations? - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 08:36:33 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: homebanking with hplx In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Tue, 12 Feb 2002, Daniel Hertrich wrote: > On Tue, 12 Feb 2002 18:33:18 +0100, Erwann ABALEA wrote: > > > Lynx is a text-mode web browser. I know of others that have a better > > looking (links and w3m for example). They were primarily written for Unix > > systems, but I know there has been a port of Lynx for 32-bit DOS. > > I just tried to do a little homebanking with Lynx. > It's a pity. > > https does indeed work here on my Linux box, and I even could connect > to my accout after entering account number and so on, but since the web > interface of my bank (Deutsch Bank 24) uses frames, lynx has big > problems displaying it and all the Javascript and Java-driven stuff > doesn't work anyway. Well. links and w3m support frames, tables, and all the HTML 4.0 goodies. But if you need support for Javascript or Java, you clearly don't need text-mode browser (at least for Java, it could be possible to have Javascript support in a text-mode browser). I found a Javascript library in OpenSource somewhere on the Web... Maybe in a near future those text-mode browser will be able to support this language... -- Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- Keyboard not connected, press to continue. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 08:37:57 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: homebanking with hplx In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Tue, 12 Feb 2002, Theodore Heise wrote: > On Tue, 12 Feb 2002, Erwann ABALEA wrote: > > > Latest versions of Lynx, links and w3m have some support of HTTPS (HTTP > > over SSL), but I don't think they're able to present a client certificate > > (I might be wrong, though). > > I don't know if a certificate is involved (I suppose not), > but I *was* able to log into my Paypal account with Lynx. No client certificate is required to access your Paypal account. I work in the PKI business, and there's only few customers that use client certificate for web authentication. -- Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- QU'EST CE QU'ILS VIENNENT NOUS FAIRENT CHIER AVEC LEURS CONCURENCE il n'y a pas de concurence pour les communications loal. Pour wandoo quelle concurence peu gene FT. Aucune, ou alors qu'on m'explique. -+-CY in : Guide du Neuneu d'Usenet - Faut pas me la faire -+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 20:52:34 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: OT Re: email->sms MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Wed, 13 Feb 2002 20:49:02 +1300 (NZDT) 35m45s ago ... On Wed, 13 Feb 2002 08:13:17 +0100, Radek Svagr wrote: > Not an email-sms, but may help: WWW.MTNSMS.COM it can send > nearly all networks around the world. Needs registration. Thanks Radek! I did see them when I searched the web - and started to register but the site stopped responding. Will try again. They did have good coverage. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 11:21:11 +0100 Reply-To: Juan Belmonte Sender: HPLX Mailing List From: Juan Belmonte Subject: Re: Dead Palmtop!? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit ctrl + leftshift + ON does nothing after this, I push space and also does nothing. No beep at all. jmusiele@mninter.net wrote: >İ...¨You might try measuring the power supply voltages on the >motherboard- they should be 3.3, 5, and 12. Voltages measured at HPLX mainboard 2.55 V İbattery voltage¨ 3.25 V İmaybe the 3.3 V capacitor¨ 4.99 V İstandard TTL voltage¨ 12.05 V İsomewhere else used voltage¨ But still dead... Anyone have idea?? Thanks Juan Belmonte ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 11:52:23 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Ulrich Allen wrote: > But that would mean that I can't use Quicken via btx anymore. > I was told that homebanking with t-online classic will go > on. Even in the new t-online version 4.0 it is implemented. On 5-MAR-2002 only the BTX dial in number for the CEPT protocol is closed, which means, you can no longer use a BTX decoder on the palmtop. Through this decoder, I was able to do homebanking on the palmtop. I use(d) BTXCOM with its powerful script capabilities. It is something like D&A's ROBOT for BTX. And it is around for 8 years already. I'd really like to show Ron Sommer what he does by cutting the lines. It is a step back in technology from the productivity point of view (but who cares). Indeed homebanking is still supported with T-online 4.0 on desktops or by other means through https on browsers which support SSL, but how clumsy is that compared to the single keystroke needed for the 60kb BTXCOM running on a 80186 from your pocket all over the world! Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 22:35:16 -0700 Reply-To: ccohen5 Sender: HPLX Mailing List From: ccohen5 Subject: Post/LX and MSN Comments: To: steve@CARDERFAMILY.NET MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_00FF_01C1B415.8B312050" This is a multi-part message in MIME format. ------=_NextPart_000_00FF_01C1B415.8B312050 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Steve: have you or anyone heard of or been able to access email at MDN = using post/LX? If so, what was the setup config.? Colin ------=_NextPart_000_00FF_01C1B415.8B312050 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable
Steve:  have you or anyone heard of or been = able to=20 access email at MDN using post/LX?  If so, what was the setup=20 config.?
 
Colin
------=_NextPart_000_00FF_01C1B415.8B312050-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 12 Feb 2002 21:18:32 -0700 Reply-To: ccohen5 Sender: HPLX Mailing List From: ccohen5 Subject: CF to PCMCIA Comments: To: michel.bel@ZONNET.NL MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_00DA_01C1B40A.D2ABED80" This is a multi-part message in MIME format. ------=_NextPart_000_00DA_01C1B40A.D2ABED80 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable ..also looking for SM cards to PCMCIA. But the prices you quote are the = best I have seen. Colin ------=_NextPart_000_00DA_01C1B40A.D2ABED80 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable
..also looking for SM cards to PCMCIA.  But the = prices=20 you quote are the best I have seen.
 
Colin
------=_NextPart_000_00DA_01C1B40A.D2ABED80-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 10:57:30 -0500 Reply-To: Eduardo Seudsnimo Sender: HPLX Mailing List From: Eduardo Seudsnimo Subject: Re: FLUFF: Al Chin in America In-Reply-To: <004301c1b44f$f7ae5ce0$96180950@oemcomputer> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Lee Iacocca said "F%$k the Ch&$ks."? :-/=20 I did not know that... I do remember Jesse Jackson saying that New York was 'Hieme Town'.=20 BTW: You're gonna start another 'please don't use curse words' flame = war. "I think it would be a good idea." - Mahatma Ghandi (1869-1948), when asked what he thought of Western = civilization Is there a quotes database for the LX? -----Original Message----- From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On Behalf Of Nathalie Bugeaud Sent: Wednesday, February 13, 2002 12:25 AM To: HPLX-L@uconnvm.uconn.edu Subject: FLUFF: Al Chin in America couldn't resist :) ... Al Chin, the new student ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 17:32:26 +0100 Reply-To: Axel Berger Sender: HPLX Mailing List From: Axel Berger Subject: Fluff: was: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Stefan Peichl wrote: > I use(d) BTXCOM with its powerful script capabilities. > It is a step back in technology Oh no, it isn't! Years ago software had to do all the everyday routine tasks all by itself. Only Bill Gates (TM) has managed the great leap forward and enabled software to delegate all that low level routine stuff to the user and free itself for higher tasks like drawing icon in millions of colours. My old BTX software had to trudge along and do a routine look at nearly twenty accounts with four different banks (I hold several cashier posts) and apend all that as nicely formatted data to an existing ASCII textfile. New higher grade software delegates all that routine low level stuff to the used making him do the exactly same keystrokes and mouseclicks at least twice weekly and will only write at least six huge cluttered files. Trimming those and appending them to another file is what editors are for, no self respecting internet tool will sink so low as to bother with that. Roll on brave new world, the morons are cheering! Axel P.S: If I have overstepped what is considerd appropriate here, please give me a nod. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 20:03:54 +0100 Reply-To: Helge Holm Sender: HPLX Mailing List From: Helge Holm Subject: POST/LX 2.2f - Error writing file MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0054_01C1B4C9.902A4500" This is a multi-part message in MIME format. ------=_NextPart_000_0054_01C1B4C9.902A4500 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Hello listmembers, I have Post set up to collect mail from 4 accounts from 3 different = ISPs. It has been working perfect for more than a year until last week. = Now 2 of the accounts which are set up to 1 ISP (sensewave) results in = the following: "Error Error writing file (returned:-2 instead of 2) ok" Needless to say I don't findt this "ok", can anybody help me out here? Regards Helge ------=_NextPart_000_0054_01C1B4C9.902A4500 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable
Hello listmembers,
 
I have Post set up to collect mail from = 4 accounts=20 from 3 different ISPs. It has been working perfect for more than a year = until=20 last week. Now 2 of the accounts which are set up to 1 ISP = (sensewave)=20 results in the following:
 
"Error
 Error writing file
(returned:-2 instead of 2)
       =20 ok"
 
Needless to say I don't findt this = "ok", can=20 anybody help me  out here?
 
Regards
Helge
------=_NextPart_000_0054_01C1B4C9.902A4500-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 20:34:56 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, we Germans talked about BTX as a possibility to do homebanking. Maybe people from other countries don't know what it is. I'm currently reading a book about ISDN to prepare myself for a test, and I will give you an excerpt from the book about BTX (freely translated from German): "BTX (Bildschirmtext, trademark of the DTAG, Deutsche Telekom AG) is a public information service, which is developed with the data transmitting capabilities of the telephone network and with the display capabilities of TVs in mind. This service is internationally called "Videotex" and is an improvement of the PRESTEL service, which has been developed in 1979 in the UK. The display area is divided into 20 lines and up to 40 columns, each of these squares can display one of a big set of various characters (letters, numbers, special characters, graphical elements)..... Also geometry elements are supported (lines, circles, rectangles etc.), but such a graphics decoder is optional." "The DTAG renamed the service in 1993 to "Datex-J" and 1995 to "T-Online". Approximately 492.2 Million calls to the T-Online network are registered per year, and most of the 1.919 million T-Online customers use the "Telebanking" service. About 3.5 million bank accounts are currently maintained "online".". This book is printed in 1999. BTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 20:44:55 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: POST/LX 2.2f - Error writing file MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Helge On Wed, 13 Feb 2002 20:03:54 +0100, Helge Holm wrote: > I have Post set up to collect mail from 4 accounts from 3 different ISPs. It has been working perfect for more than a year until last week. > Now 2 of the accounts which are set up to 1 ISP (sensewave) results in the following: > > "Error > Error writing file > (returned:-2 instead of 2) > ok" I have never seen such an error message, but it sollks NOT like an error reported by any mal server or so, but it looks like an error message directly comingg from Post/LX. So there are a few possibilities: - Did you change something in your directory structure, so Post cannot write some files? - Did you change your post.cfg path entries in any way? Make sure they are correct! - are the files named axactly as the box name in the post.cfg? Did you change the box names but not the file names? - is your disk full? ;-) - do a chkdsk /f on the disk to find possible errors GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 13:57:06 -0600 Reply-To: Theodore Heise Sender: HPLX Mailing List From: Theodore Heise Subject: Re: Fluff: was: homebanking with hplx In-Reply-To: <3C6A951A.DB9C9421@NexGo.De> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Wed, 13 Feb 2002, Axel Berger wrote: > Oh no, it isn't! > Years ago software had to do all the everyday routine tasks all by itself. > Only Bill Gates (TM) has managed the great leap forward and enabled > software to delegate all that low level routine stuff to the user and free > itself for higher tasks like drawing icon in millions of colours. My old > BTX software had to trudge along and do a routine look at nearly twenty > accounts with four different banks (I hold several cashier posts) and apend > all that as nicely formatted data to an existing ASCII textfile. > New higher grade software delegates all that routine low level stuff to the > used making him do the exactly same keystrokes and mouseclicks at least > twice weekly and will only write at least six huge cluttered files. > Trimming those and appending them to another file is what editors are for, > no self respecting internet tool will sink so low as to bother with that. > > Roll on brave new world, the morons are cheering! > > Axel > P.S: If I have overstepped what is considerd appropriate here, please give > me a nod. More like a round of applause--well said! -- Ted Heise West Lafayette, IN, USA ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 15:20:48 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Stephan Peichel wrote: when did you last try btx, Stephan? I get a busy on 01910. Or did you find a way to use 0191011? If I try that I get a no carrier with my btx program. But that is possible with PPP only, isn't it? Or could you get BTXCOM to run after www/lx? Even it doesn't work after the 5th of March I'd like to know. Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 15:57:13 EST Reply-To: TCU549@AOL.COM Sender: HPLX Mailing List From: Kat Doyle Subject: Re: POST/LX 2.2f - Error writing file Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I had a similar problem awhile back. I copied the *.i files to my backup directory, re-installed post/lx, and moved the *.i files back to my newly re-created c:\www\mail directory. Everything has been working fine since then. Of course, you may want to make a proper backup of all the files in case my solution doesn't work for you. Kat ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 13:12:42 -0800 Reply-To: Joseph.Buford@HSC.COM Sender: HPLX Mailing List From: Joseph Buford Subject: 256MB CF card MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Just got a 256MB CF card labeled as " A-1 FLASH" P/N FC256. It works fine in my DS 200lx 6M as well as my SS 200lx 6M and my NEX II player. Cost right at $100 No driver installed on either 200lx Here are his other auctions if anyone is interested. http://cgi6.ebay.com/aw-cgi/eBayISAPI.dll?ViewListedItems&userid=getmysystem&sort=2&page=3&rows=25&since=-1 BTW-does anyone have a list of KNOWN good makes/models of CF cards useable on the 200lx? Is anyone compiling such a list? Joe ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 16:15:08 -0500 Reply-To: Martin Bergvill Sender: HPLX Mailing List From: Martin Bergvill Subject: Fwd: Re: IMDB in PocketPC-format? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Just something I came across in a norwegian pda group. I have not checked out the link myself yet..and do not know if it can be usefull for the Hplx.. But it would have been nice to have imdb on the Hplx. Regards -- Martin Bergvill ,Narvik Norway --- begin of forwarded message --- Disse er fra ca 13 meg til 600k med svfrt mye tatt med. Du fer ta en titt og se om du finner ut av noe pe grunnlag av disse: http://www.memoware.com/Category=Entertainment_ResultSet=0.htm --- end of forwarded message --- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 15:07:48 -0700 Reply-To: jaevans@codenet.net Sender: HPLX Mailing List From: John_Evans Subject: 200lx and cold weather Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Greetings, Has anyone come up with a way to use the 200LX outside in cold weather (0 to 15 degrees, say)? I recently took my 200LX backpacking on a winter outing and, of course, I should've known better, 'cause the screen was pretty black at power on. I suspect the biggest culprit is the contrast control circuit that most know is affected by the charging circuit. tnx, john ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 13 Feb 2002 18:28:00 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Goin' Postal and POST/LX Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Which is the best? -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Win a ski trip! http://www.nowcode.com/register.asp?affiliate=1net2phone3a ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 00:47:26 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: 200lx and cold weather MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit John_Evans wrote: > Has anyone come up with a way to use the 200LX outside in > cold weather (0 to 15 degrees, say)? I recently took my 200LX > backpacking on a winter outing and, of course, I should've > known better, 'cause the screen was pretty black at power on. Keep your LX inside your jacket for body warmth? Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 00:47:30 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: Goin' Postal and POST/LX Comments: To: Dario Draiman MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Dario Draiman wrote: > Which is the best? Post/LX (WWW/LX) does more but costs money. GP was developed to provide email in an LX with limited resources. I believe it was cheaper too and now it's free but not-supported. If you can afford it and have enough disk space WWW/LX is worth the cost. Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 04:42:18 +0000 Reply-To: castorlw@YAHOO.COM Sender: HPLX Mailing List From: Larry Castor Subject: Re: 200lx and cold weather MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable John, >> I recently took my 200LX backpacking on a winter outing and, of = course, I should've known better, 'cause the screen was pretty black at = power on.<< What kind of batterys were you using? Lithiums do well in cold weather = where as alkaline or nicd don't. I've heard nimh are good too, but = haven't confirmed that yet. Larry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 16:50:50 +0800 Reply-To: SM Ling Sender: HPLX Mailing List From: SM Ling Subject: eddie.mit.edu site archive site MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit From the FAQ, I tried to access the eddit.mit.edu site and it redirect to the site below: http://clove.garlic.com/lxarchive But this site is password protected, does anyone know how to get to the lx archive? Is it available to public now? Thanks in advance. Cheers, Ling SM ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 12:21:09 +0200 Reply-To: airvia Sender: HPLX Mailing List From: airvia Subject: free sms all over the world MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit >Not an email-sms, but may help: WWW.MTNSMS.COM it can send nearly all networks around the world. Needs registration. > >Radek Pls check http://sms.gt.com.ua/, no registration needed, very fast and reliable Stoyan Loutchev Sofia , Bulgaria 200lx, 700lx, cf 80mb ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 11:55:55 +0100 Reply-To: furlan@gmx.net Sender: HPLX Mailing List From: "Dr. Werner Furlan" Organization: OE9FWV Subject: fluff:Re: homebanking with hplx Comments: To: Daniel Hertrich MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT hi Daniel, On 13 Feb 2002 at 20:34, Daniel Hertrich wrote: > This book is printed in 1999. > > BTX > daniel > a new signature from you? scnr ;-) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 12:46:25 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: homebanking with hplx Comments: To: Ulrich Allen MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Ulrich Allen wrote: > when did you last try btx, Stephan? yesterday > I get a busy on 01910. Or did you find a way to use 0191011? No, you have to use 01943131. I've been informed by T-online, to use this number, because 01910 was closed down end of the year 2001. But 01943131 is only valid until 5-Mar-2002. Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 13:04:45 -0500 Reply-To: =?iso-8859-1?Q?Jos=E9?= Angel de Castro Barco Sender: HPLX Mailing List From: =?iso-8859-1?Q?Jos=E9?= Angel de Castro Barco Subject: FS: fax/modem PCMCIA&buitlin memory Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: base64 UENNQ0lBIGZheC9tb2RlbSAoaW50ZXJuYWwpIHdpdGggNiBNYiBpbnRlcm5hbCBtZW1vcnkgKEY6 IGRyaXZlKSBmb3IKY29tbXVuaWNhdGlvbiBwcm9ncmFtLCBkYXRhLCBkb3NjcywgLi4uLgoyLjQw MCBiZHMgZGF0YQo5LjQwMC8xNC40MDAwIGZheAo0MCQgKHNoaXBwaW5nIGNoYXJnZSBpbmNsdWRl ZCkKCkVtYWlsIG1lIHByaXZhdGVseSAoY2FzdHJvYmFyY29AeWFob28uY29tKQoKCioqKioqKioq KioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioq KgpKb3PpIEFuZ2VsIGRlIENhc3RybyAgICAgICAgICAgICAgICAgICAgICBUbm86IDM0IDk4MyAz NiAzMCA0MgpDL1MuTG9yZW56bywxLTO6Qgo0NzAwMSBWQUxMQURPTElEIChTUEFJTikgICAgICAg ICAgICAgICAgICBjYXN0cm9iYXJjb0B3b2wuZXMKKioqKioqKioqKioqKioqKioqKioqKioqKioq KioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqCgo= ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 08:08:05 -0500 Reply-To: Jon Barrett Sender: HPLX Mailing List From: Jon Barrett Subject: Re: 200lx and cold weather In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit ------------------------------ > > Date: Thu, 14 Feb 2002 04:42:18 +0000 > From: Larry Castor > Subject: Re: 200lx and cold weather > > John, > > >> I recently took my 200LX backpacking on a winter outing and, of = > course, I should've known better, 'cause the screen was pretty black at = > power on.<< > > What kind of batterys were you using? Lithiums do well in cold weather = > where as alkaline or nicd don't. I've heard nimh are good too, but = > haven't confirmed that yet. > > Larry No - LCD displays are noted for going black in the cold. Keeping the screen warm is the only cure (which will also help the unrelated problem of alkalines dying faster - Lithium or NiCd/NiMH do better in cold than ordinary throw-aways) Jon Jon Barrett jonzann@altavista.net Isopoint/Glidepad, Bring Back the Paw! (And give the Omnibooks back to Corvallis!) OB900b/W2KP, OB4150/W2K, OB800/W98, OB800/W95-Mandrake8 - - - and the OB800s are *NOT* for sale! - - - ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 14:23:30 +0100 Reply-To: Helge Holm Sender: HPLX Mailing List From: Helge Holm Subject: Re: POST/LX 2.2f - Error writing file Comments: To: daniel.hertrich@GMX.DE MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0041_01C1B563.2D319B20" This is a multi-part message in MIME format. ------=_NextPart_000_0041_01C1B563.2D319B20 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, Thanks for good suggestions, to Daniel in particular who helped solve = the=20 problem with the point below. By accident I had deleted my C:\TMP = directory.=20 Now everything works fine. Regards=20 Helge ----- Original Message -----=20 From: "Daniel Hertrich" To: Sent: Wednesday, February 13, 2002 7:44 PM Subject: Re: POST/LX 2.2f - Error writing file ------------------------- snip ---------------------------------------- >=20 > - Did you change something in your directory structure, so Post cannot > write some files? ------=_NextPart_000_0041_01C1B563.2D319B20 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hello,
Thanks for good = suggestions, to=20 Daniel in particular who helped solve the
problem with the point = below. By accident I had deleted my C:\TMP directory. =
Now everything works = fine.

Regards=20
Helge
----- Original Message -----
From: "Daniel Hertrich" = <daniel.hertrich@GMX.DE>
= To:=20 <HPLX-L@UConnVM.UConn.Edu>=
Sent:=20 Wednesday, February 13, 2002 7:44 PM
Subject: Re: POST/LX 2.2f - = Error=20 writing file
------------------------- snip=20 ----------------------------------------
>
> - Did you = change=20 something in your directory structure, so Post cannot
> write some = files?

------=_NextPart_000_0041_01C1B563.2D319B20-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 14:38:11 +0100 Reply-To: Helge Holm Sender: HPLX Mailing List From: Helge Holm Subject: Ooops HTML - Re: POST/LX 2.2f - Error writing file MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Ooops, I apologise for using html in my last reply. Here is the txt version. Regards Helge Hello, Thanks for good suggestions, to Daniel in particular who helped solve the problem with the point below. By accident I had deleted my C:\TMP directory. Now everything works fine. Regards Helge ----- Original Message ----- From: "Daniel Hertrich" To: Sent: Wednesday, February 13, 2002 7:44 PM Subject: Re: POST/LX 2.2f - Error writing file ------------------------- snip ---------------------------------------- > > - Did you change something in your directory structure, so Post cannot > write some files? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 08:52:51 -0500 Reply-To: Eduardo Seudonimo Sender: HPLX Mailing List From: Eduardo Seudonimo Subject: Re: 200lx and cold weather Comments: To: jaevans@codenet.net In-Reply-To: <200202131507.AA3542286784@mail.codenet.net> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable I sometimes see this when leaving it outside in the car but it usually = is treatable by using the İon¨=3D+/- contrast control button = combinations. Do you mean that it was so black you could not even adjust = it to normal? -----Original Message----- From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On Behalf Of John_Evans Sent: Wednesday, February 13, 2002 5:08 PM To: HPLX-L@uconnvm.uconn.edu Subject: 200lx and cold weather Greetings, Has anyone come up with a way to use the 200LX outside in cold weather = (0 to 15 degrees, say)? I recently took my 200LX backpacking on a = winter outing and, of course, I should've known better, 'cause the = screen was pretty black at power on. I suspect the biggest culprit is = the contrast control circuit that most know is affected by the charging = circuit. tnx, john ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 09:15:45 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Dead Palmtop!? MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Juan Belmonte wrote: > ctrl + leftshift + ON does nothing > after this, I push space and also does nothing. > No beep at all. Sometimes when nothing else works it's worthwhile to take out all the batteries including the backup battery and just let the unit sit for a week. I had one stop working when it got wet a few years ago and after trying to get it working for a couple of days I went to Service Merchandise and got a replacement. I did take the batteries out as a precaution and put it away for a future time when I might want to look into getting it repaired. About a week later I was still having a hard time believing it didn't work so I got it out and tried it and sure enough it worked fine. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 10:23:06 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Palm Modem 2400/PalmFax Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Hi everyone! I have a HP100LX PalmModem 2400/PalmFax (made by New Media Corporation). The thing is it never works. It comes with 256KB of flash memory and a custom terminal program (palmterm.exe). It seems that wouldn't work with Datacomm, only with its terminal program, but neither ways works. Does anyone has one of these modems and know the trick? Dario HP200LX 2MB SS 48MB flash. -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Win a ski trip! http://www.nowcode.com/register.asp?affiliate=1net2phone3a ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 08:56:56 -0700 Reply-To: jaevans@codenet.net Sender: HPLX Mailing List From: John_Evans Subject: Re: 200lx and cold weather Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Greetings All, Got lots of good recommendations. Yes, it happened to be 10 degrees when I popped out of my tent that morning. I will do some tests soon, but I will have to see if I can get it functioning before I carry it backpacking again. Most of the recommendations focused on batteries (use lithium) and keeping the entire 200LX warm in a pocket until use. I will certainly do both. I forgot the night before to stick it in the foot of my bag but I already had company with my gel cell batteries, water bottles, and clothing. thanks all, john ---------- Original Message ---------------------------------- From: Eduardo Seudonimo >I sometimes see this when leaving it outside in the car but it usually is treatable by using the İon¨=+/- contrast control button combinations. Do you mean that it was so black you could not even adjust it to normal? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 09:38:48 -0700 Reply-To: ccohen5 Sender: HPLX Mailing List From: ccohen5 Subject: Screen solution for 200LX? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Folks, is this the answer? Chip fuels tiny monitor resolution Wed Feb 13,11:43 AM ET By Rupert Goodwins, ZDNet News Handheld devices with notebook quality graphics and video are on their way, according to Microvision. It has demonstrated an 800 x 600 pixel full-color display that has just four active components and can be integrated into a personal digital assistant (PDA) or a cellphone. .Special FREE Software .Beginner's Guide to MP3 .Hardware Quick Start Guides for Beginners .Latest PDA price drops .Find a tech job .Check out Pentium 4 PCs .Build your own Web site .Get e-business info Sign up for the free ZDNet News Dispatch: (CNET Networks Privacy Policy) The device works by having three light-emitting diodes shining red, green and blue onto a micro-electrical-mechanical-systems (MEMS) chip with a vibrating mirror. As the mirror vibrates, it scans out a full picture, which is projected through a lens to the viewer. The display is designed to be held up to the eye, either as a screen in a handheld device or as part of a wearable headset. Potentially, it can be made not much larger than existing silicon chips. The image quality of the Microvision prototype is exceptional, said Russell Hannigan, Microvision's director of business development for advanced products. "We achieve full Super VGA (SVGA or 800 x 600 lines) resolution and have measured contrast ratios up to 150:1. Color gamut and saturation are already comparable with a very high quality CRT and we expect to see further improvements in performance over the weeks ahead." The company says it will spend the next 18 to 24 months improving the display by reducing size, weight, power consumption and cost. The MEMS chip is being developed in conjunction with Taipei company Walsin Lihwa, and the LEDs with American opto-electronics specialist Cree. Although the concept of scanning LEDs through a moving mirror isn't new--the first commercial device was the Private Eye head-mounted display, launched in 1990--the development of MEMS and full-spectrum LEDs makes very high quality, mass-produced and affordable devices much more plausible. Microdisplays--displays less than 1.5" diagonally that require projecting--are being actively developed around the world with many different approaches. Other technologies close to commercialization include liquid-crystal on silicon (LCOS), organic light-emitting diodes (OLEDs), field-emissive displays (FEDs), vacuum-fluorescent-on-silicon (VFOS) and variations on the cathode-ray tube. All these technologies have different trade-offs between power, size, resolution and refresh rate, and can manage color more or less well. Although it is commonly held that microdisplays will be a huge market, especially when 3G mobile communications becomes good enough to carry live video, it is not yet clear which of the many options will prove themselves in the market. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 17:49:21 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Lotus 1-2-3 and WYSIWYG Add-in MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, I have tried to install the version 2.4 of Lotus 1-2-3 on my palmtop and have a problem with it: If I start it with 123.exe, it tries to load the WYSIWYG addin and only displays a text cursor and doesn't react to keystrokes anymore. If I start with 123.exe -ctextmode, it doesn't try to load WYSIWYG, but says "invalid configuration file". I HAVE used install.exe to specify my hardware (I have choosen CGA monochrome and a Canon BJ-10 printer as text and graphics printer). Two questions: 1. Does WYSIWYG work at all on the palmtop? If yes, what do I have to do to make it work? 2. I want to use 123.exe in pns200.ini to be able to point-and-shoot on an 123 file for example in MM/LX. How do I give 123 a file name of a spreadsheet to load? If I use the common syntax 123.exe filename I get an error message that "one of the driver files has an invalid reision number", so I assume 123 thinks I wanted to let it use the file as a driver... Thanks a lot daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 13:11:53 -0500 Reply-To: "Striegel, Alan" Sender: HPLX Mailing List From: "Striegel, Alan" Subject: French - English/English - French dictionary software (free?) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Does anyone know of some program or database for the HPLX to help with translating English to French and the reverse? My family is taking a trip to Paris in April and I want some help reviving or replacing long-dormant French-speaking brain cells. Alan Striegel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 20:18:24 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: 200lx and cold weather MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Jon On Thu, 14 Feb 2002 08:08:05 -0500, Jon Barrett wrote: > No - LCD displays are noted for going black in the cold. Keeping the screen > warm is the only cure (which will also help the unrelated problem of Mine goes black if it gets warm. If I put the LX into sunlight in a way that one part is in the shadow and another part is in the sun, and if I but it back into normal light a few minutes later, one part of the screen is much darker than the pther part. The darker part is ths one which has been hit by the sunlight. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 15:18:22 -0500 Reply-To: "Striegel, Alan" Sender: HPLX Mailing List From: "Striegel, Alan" Subject: Re: Palm Modem 2400/PalmFax MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" You're quite sure it's intended for the 100LX? I once had a NewMedia palmModem 2400 that was made specifically for the HP 95LX. It would not work in the 100LX nor a 200LX. There is an image of it at http://www.striegels.com/alan/HPLX/95LX/NewMediaPalmModemforHP95LX.JPG. See if it looks identical. Alan Striegel >From: Dario Draiman İmailto:dario200@MAIL.COM¨ >Sent: Thursday, February 14, 2002 10:23 AM >... >I have a HP100LX PalmModem 2400/PalmFax (made by New Media Corporation). The thing is it never works. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 15:22:42 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Re: 200lx and cold weather Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 I think this is more a radiation problem than a temperature one. Remember that LCD works by (polarizing is the term?) the dipoles of the crystal. The same happen with LCD watches, it gets darker after exposing to the sun. Dario -----Original Message----- From: Daniel Hertrich Date: Thu, 14 Feb 2002 20:18:24 +0200 To: HPLX-L@UConnVM.UConn.Edu Subject: Re: 200lx and cold weather > Hi Jon > > On Thu, 14 Feb 2002 08:08:05 -0500, Jon Barrett wrote: > > > No - LCD displays are noted for going black in the cold. Keeping the screen > > warm is the only cure (which will also help the unrelated problem of > > Mine goes black if it gets warm. > If I put the LX into sunlight in a way that one part is in the shadow > and another part is in the sun, and if I but it back into normal light > a few minutes later, one part of the screen is much darker than the > pther part. The darker part is ths one which has been hit by the > sunlight. > > GTX > daniel > > -- > http://www.daniel-hertrich.de/contact > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Win a ski trip! http://www.nowcode.com/register.asp?affiliate=1net2phone3a ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 15:26:51 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Re: Palm Modem 2400/PalmFax Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Yes I'm sure. It's a white painted PCMCIA card that says NEW MEDIA CORPORATION HP100LX Palm Modem 2400/PALMFAX Identical to the one on the picture but says HP100LX instead of HP95LX. Dario -----Original Message----- From: "Striegel, Alan" Date: Thu, 14 Feb 2002 15:18:22 -0500 To: HPLX-L@UConnVM.UConn.Edu Subject: Re: Palm Modem 2400/PalmFax > You're quite sure it's intended for the 100LX? I once had a NewMedia > palmModem 2400 that was made specifically for the HP 95LX. It would not > work in the 100LX nor a 200LX. > > There is an image of it at > http://www.striegels.com/alan/HPLX/95LX/NewMediaPalmModemforHP95LX.JPG. See > if it looks identical. > > Alan Striegel > > >From: Dario Draiman İmailto:dario200@MAIL.COM¨ > >Sent: Thursday, February 14, 2002 10:23 AM > >... > >I have a HP100LX PalmModem 2400/PalmFax (made by New Media Corporation). > The thing is it never works. > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Win a ski trip! http://www.nowcode.com/register.asp?affiliate=1net2phone3a ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 07:42:59 +1100 Reply-To: Russell Hemery Sender: HPLX Mailing List From: Russell Hemery Subject: The battery board (Korean readers wanted) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Hi all Are there any Korean members on the list that could look at http://lily.keri.re.kr/battery/wwwboard/wwwboard97.html and associated and report if the discussions have bearing for the LX? There is some english but mostly korean. Advanced battery discussion forum. Regards Russell ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 14 Feb 2002 22:55:06 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Fluff: FreeCell 1888 very hard MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit I (finally!) completed FC game 1888. I found this game very difficult although as it often happens, once I tried a new way of attacking the game it was won fairly quickly. Give it a try, maybe it won't take you a week to complete like it did me. I wonder if Curtis gets some satisfaction knowing how much frustration some of his games will cause? :-) Must have LX software: SC WWW/LX A Curtis Cameron game of your choice (or all of them) ... Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 12:53:30 +0800 Reply-To: David Sender: HPLX Mailing List From: David Subject: Re: The battery board (Korean readers wanted) Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Not much discussion pertaining to our LX that is currently applicable. Mostly about future generation batteries in development, with applications ranging from cell phones to automobiles. (Too technical for my understanding, though) David > Hi all > > Are there any Korean members on the list that could look at > http://lily.keri.re.kr/battery/wwwboard/wwwboard97.html and associated and > report if the discussions have bearing for the LX? > > There is some english but mostly korean. Advanced battery discussion forum. > > Regards > > Russell -- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 14:34:26 +0800 Reply-To: SM Ling Sender: HPLX Mailing List From: SM Ling Subject: Remcom & rc with 200lx MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Does anyone has success with the IR remote controller software with 200LX? I tried both remcom and RC already, but both NG here. I have been playing with for a while, but could not confirm is the problem lies in my operation, or the software, or the remote controller themselves (yes, I tried a few controllers here - Thomson TV, cable boxes, toshiba TV) . I tried learning different key, but each time the recorded file show the same information and also havng the same size when I tried doing long sequences of key. Unfortunately, the manuals of both software is too encrypt for me. Any hints? Thanks. Cheers, Ling SM ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 07:28:59 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: for XT-GOLD users MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit a tip for those i have sent the XT-GOLD v.3 LX reduced edition, which came without help files, the following are tree and directory outlining commands which affect the way xtree displays logged drives + logs one directory * logs all directories and files - removes all from memory they affect how much directory information is logged and kept in memory; very handy on the LX nath ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 08:35:59 +0100 Reply-To: radek.svagr@LGPHILIPS-DISPLAYS.COM Sender: HPLX Mailing List From: Radek Svagr Subject: Re: Remcom & rc with 200lx MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii I was using RC on a single speed 200lx. It was working only with my video, all other devices didn't listen. Now on double speed 200lx doesn't work anymore. BTW: where to get remcom? Radek SM Ling cc: (bcc: Radek Svagr/HRC/COMP/PHILIPS) Sent by: HPLX Subject: Remcom & rc with 200lx Mailing List 2002-02-15 07:34 AM Please respond to SM Ling Does anyone has success with the IR remote controller software with 200LX? I tried both remcom and RC already, but both NG here. I have been playing with for a while, but could not confirm is the problem lies in my operation, or the software, or the remote controller themselves (yes, I tried a few controllers here - Thomson TV, cable boxes, toshiba TV) . I tried learning different key, but each time the recorded file show the same information and also havng the same size when I tried doing long sequences of key. Unfortunately, the manuals of both software is too encrypt for me. Any hints? Thanks. Cheers, Ling SM ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 08:51:40 +0100 Reply-To: Dzon Sender: HPLX Mailing List From: Dzon Subject: Re: Remcom & rc with 200lx Comments: To: SM Ling In-Reply-To: <021f01c1b5ea$e92e87c0$729015a5@amd> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII > Does anyone has success with the IR remote controller software with 200LX? > I tried both remcom and RC already, but both NG here. Remcom works fine for me, so I didn't try another utility. Yes it rarely hangs my machine, but works. I'd like to know if another software can find out the end of the sequence sent? Cause when the sequence is too long, or one button-press does more commands, or command repeating is slow. I am using software named Girder to control my PC TV tuner via IR, and it does the thing -- the command sequence is always just about 6 bytes long. -- -Dzon dzon@softhome.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 08:50:53 +0100 Reply-To: xmarc@free.fr Sender: HPLX Mailing List From: Marc BERLIOUX Subject: Re: French - English/English - French dictionary software (free?) In-Reply-To: <454226824160D3118F9D00508B08F15A0785F8AE@piouspkldmail.pios.com> Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Le Jeudi 14 Fivrier 2002 19:11, Striegel, Alan a icrit : > Does anyone know of some program or database for the HPLX to help > with translating English to French and the reverse? My family is > taking a trip to Paris in April and I want some help reviving or > replacing long-dormant French-speaking brain cells. the program is : drink wine eat cheese stop worriing about money -- Marc BERLIOUX "Les statistiques sont formelles : Il y a de plus en plus d'itrangers dans le monde" ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 09:05:54 +0100 Reply-To: Dzon Sender: HPLX Mailing List From: Dzon Subject: Any way to download font into LX videocard? MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Hello there, since here in Czech Republic we use more than one coding scheme for our national characters İGates on his own uses two schemes at once in his Windoze -- pc latin2 and cp1250, and there are two more I am or was using regularly¨, I would be glad if I could run some old national applications İlike dictionary¨ which uses other scheme than LX does, with readable national letters. Any way to download font into LX videocard İideally temporarily, or not residentally to 'switch' codings¨? Thanks -- -Dzon dzon@softhome.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 16:30:43 +0800 Reply-To: SM Ling Sender: HPLX Mailing List From: SM Ling Subject: Re: Remcom & rc with 200lx MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > > Does anyone has success with the IR remote controller software with 200LX? > > I tried both remcom and RC already, but both NG here. > > Remcom works fine for me, so I didn't try another utility. Yes it rarely > hangs my machine, but works. > > I'd like to know if another software can find out the end of the sequence > sent? Cause when the sequence is too long, or one button-press does more > commands, or command repeating is slow. > I am using software named Girder to control my PC TV tuner via IR, and it > does the thing -- the command sequence is always just about 6 bytes long. I can't tell as I could not get either to work :-). You could get rc from the super site. BTW where is Girder located? How could I test remcom is working for me? say if I record keypad1 on one .rmt file and keypad2 on another .rmt file, I should get different content for these files right/ (Just checking is my way of doing is OK) Ling SM ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 16:36:29 +0800 Reply-To: SM Ling Sender: HPLX Mailing List From: SM Ling Subject: Re: Remcom & rc with 200lx MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit From the faq, it can be downloaded from eddie site, but this site is closed and the new site it referred to has a password protection. I am attaching the remcom to radek. I got it from http://members.aol.com/cochi2/hpindex.html . > I was using RC on a single speed 200lx. It was working only with my video, all other devices didn't listen. Now on double speed 200lx doesn't work anymore. > BTW: where to get remcom? May I know how to tell is the 200lx is X1 or X2 speed? It might be the problem here. The manual did mention something to change a byte using debug. Ling SM > I was using RC on a single speed 200lx. It was working only with my video, all other devices didn't listen. Now on double speed 200lx doesn't work anymore. > BTW: where to get remcom? > > Radek ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 12:38:30 +0100 Reply-To: Dzon Sender: HPLX Mailing List From: Dzon Subject: Re: Remcom & rc with 200lx Comments: To: SM Ling In-Reply-To: <00ac01c1b5fb$ddbc2bc0$cbce15a5@amd> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII > > I was using RC on a single speed 200lx. It was working only with my video, > all other devices didn't listen. Now on double speed 200lx doesn't work > anymore. > > BTW: where to get remcom? > May I know how to tell is the 200lx is X1 or X2 speed? It might be the > problem here. The manual did mention something to change a byte using > debug. Do you know how I got that my LX is doublespeed? I rebooted with no autoexec and config and screen moved one character right and there was flickering on the very first column. Then: I was able to connect LX with another device via serial port only when I halved the speed on LX, ie 9600 on PC and 4800 on LX, and it worked. And finally, when I opened it, there was 'something' else on the crystal's place :) İblack case, four legs, only two of them connected to the crystal's place, two left on the air -- what's thats name?¨. -- -Dzon dzon@softhome.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 16:23:01 +0100 Reply-To: Axel Berger Sender: HPLX Mailing List From: Axel Berger Subject: Re: Any way to download font into LX videocard? MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit If you start KEYBEZ without parameters it will put a HP?.KIT file into your root of C:. That file contains a IMHO comprehensive and understandable explanation ofhow to add character maps to the HP. It mentions a Windows 2.0 file format, the documentation of which you'll have to find elsewhere. (As this group is populated by grown-ups using real computers, I do not fillquote, do not use HTML junk but have a valid RID in my header.) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 00:24:58 +0800 Reply-To: SM Ling Sender: HPLX Mailing List From: SM Ling Subject: Re: Remcom & rc with 200lx Comments: To: Dzon MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > > > Are you sure your IR is okay? > > Can't tell. After you mentioned, I tried a second 200lx but still no luck. > > If you have two LXs, just try connect them via IR in Filer. Works cool :) I got three 200LXs to be exact. All through bargain last year. But probably with skill level of only 0.3 . IR with Filer is really Cool, this shall buy the Flash card some wear-n-tear time. At least it proves the LX IR here are innocent :-) So possible faults are either the remote controllers or me. > > And also more remote control also. It might be the remote here are all not > > of the same frequency as 200lx IR. Also tested with the clkup32, but still > > no luck. > > Hm? I'm not expert thru remotes, but I thought the low-level communication > is more-less standardized, so there is enough room for existence of such > devices as 'Universal remote' or digital watch with universal remote... Somemore IR to play around, I guess. The wife and kids are beginning to complain why daddy is hogging all the remote now. :-( Thanks for your tips on the x2, so all here are simple x1, at least for now ..... The digital watch remote, you reminded me of my battery-dead Casio-watch story. Over here the train stations and public bus interchanges provide TV sets for viewing, they are hung quite high up. You should come and see the faces of those waiting passengers when out-of-sudden the TV flips channel here and then there, and then volume level changes, then back again. It well worth the money for the watch. For now, they are safe...until I got the 200LX IR up and running (I heard the range is not that good though) Ling SM ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 00:19:14 +0800 Reply-To: SM Ling Sender: HPLX Mailing List From: SM Ling Subject: Re: Remcom & rc with 200lx Comments: To: "Donald (Panstrat)" MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > I've been using RemCom (RemCom.exm 2 March 1997 - 3:45 pm) > with moderate success. I think it works better on my 700LX than my > 200LX, but that might just be a subjective impression.I actually once > thought that I have fried my IR port by putting in a rogue modem card, > but after a couple of reboots and removing (and adding?) some IR > port drivers, I was once again able to have IR comms with my > notebook PC and my HP 5P printer's IR port. That's always a problem, if the authors are listening, perhaps in future the software could blink something when there is a IR byte being received. > I used remcom with moderate success to control the following: > > Philips TV > Panasonic VCR > Pioneer DVD player > Digital Sat TV decoder (don't know the brand) > Technics portable CD players I don't have one that is the same :-( > The Wife - well this is still in beta - there are some functions which > don't seem to work that well ;-) That would be a world-beater. Let me be your first beta-tester :-) > So as you can see, remcom is useful if you get it working, but I have had my > share of problems. > For instance, the same button on my TV's remote control (the missing one, > yes), does different > things depending on which mode / state the TV is in. Eg. if the screen is in > OSD mode, > and I press the button again, it moves to another mode then another then > back to OSD mode. > I sometimes have to point the HP to the TV and send the appropriate signal, > then halfway > through I cut of the signal manually to make it work. Yeah, manually! I > stick my hand in front > of the IR leds! As I say, the RC and REMCOM manual need improvement. Or maybe simply state "step forward, extend your arm to the TV set, find the right button onnthe TV set and just press it" :-) > Well there you go. > > Note you might try to remove all IR related software from your config.sys > and autoexec.bat > to make all of this work..... Thanks for sharing, now I know the software does work. Ling SM ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 23:09:00 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: Remcom & rc with 200lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit SM Ling wrote: > Does anyone has success with the IR remote controller software with 200LX? > I tried both remcom and RC already, but both NG here. I tried REMCON a couple of years ago and it worked Ok on my Sony TV. The big problem is that the IR transmitter on the 200LX is pretty weak so I had to be within a couple feet of the TV to get it to work. Having to be that close killed the possible usefulness of REMCON. I've heard the 100LX's IR is stronger than the 200's. Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 17:18:22 -0600 Reply-To: rob@rclewis.com Sender: HPLX Mailing List From: robert c lewis Subject: Re: GARLIC & Appointment Database? In-Reply-To: <20020212022502.JPOD21579.mtiwmhc22.worldnet.att.net@worldnet.att.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII It looks like I am going to have to hand transfer every record out of it into a new database, since both use of GARLIC and the other suggestion, merging it with an empty database have not worked. If there are any other suggestions I'm open to trying them. Thanks. Rob On Tue, 12 Feb 2002 fjkaufman@worldnet.att.net wrote: > > Whatever you do, use GARLIC on a copy of the file and see how that goes. > If it fixes it, check it out and only when assured the file is okay, > erase the original. > > Sometimes going manually through the file will find the offending > record. > > Good luck > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 00:58:14 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: GARLIC & Appointment Database? MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > It looks like I am going to have to hand transfer every record I have missed the beginning of this. The two things I would try first, would be converting to a comma separated file via the connectivity kit software and printing it to file using the all fields option. Even if working only partially, both could save you a lot of typing. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 13:48:17 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: OT Re: email->sms MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sat, 16 Feb 2002 13:43:41 +1300 (NZDT) 2 days 17h30m24s ago ... On Wed, 13 Feb 2002 08:13:17 +0100, Radek Svagr wrote: > Not an email-sms, but may help: WWW.MTNSMS.COM it can send > nearly all networks around the world. Needs registration. www.sms.ac seems to have taken over from www.mtnsms.com - I registered at www.sms.ac and the message I got came from a +27..number and had ">mtnsms.com" at the end. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 19:49:06 -0500 Reply-To: Jim Westley Sender: HPLX Mailing List From: Jim Westley Subject: Re: GARLIC & Appointment Database? In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Here are a couple of suggesstions: Try removing half of them at a time. If the first half you try doesn't work, try the other half. If that transfers ok, you have narrowed the problem by one half. Keep on doing this until you have removed all the records. Not the most elegant, but this may speed up manual transfer. The other method I have had success with when nothing else worked was using a synching program to see if it can pull the records out. Last time I have had problems was several years ago, and I think the program was intellisync. I was able to rescue an appt file that had resisted all efforts to fix. By the way, I have not had any problems since I have gone on a regular program of archiving the older tasks and appointments, thus keeping the file size down. My experience, and I seem to remember that HP might have said this too, is that if you get over 200 kb in size on your appt data, you have a much higher chance of data corruption. Jim >It looks like I am going to have to hand transfer every record out of it >into a new database, since both use of GARLIC and the other suggestion, >merging it with an empty database have not worked. If there are any >other suggestions I'm open to trying them. Thanks. > >Rob > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 14:00:02 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Lotus 1-2-3 and WYSIWYG Add-in MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sat, 16 Feb 2002 13:54:57 +1300 (NZDT) 1 day 09h05m36s ago ... On Thu, 14 Feb 2002 17:49:21 +0200, Daniel Hertrich wrote: > 2. I want to use 123.exe in pns200.ini to be able to point-and-shoot on > an 123 file for example in MM/LX. > How do I give 123 a file name of a spreadsheet to load? If I use the > common syntax 123.exe filename I get an error message that "one of the > driver files has an invalid reision number", so I assume 123 thinks I > wanted to let it use the file as a driver... Daniel, I found this in a 123 book 123 -wDaniel will load DANIEL.WK1 I am not sure if the file needs to be in the default directory, or whether you can give it a path as well. Hope this helps. Unfortunately my expertise in 123 is limited. I forget how I stopped wysiwyg loading for example :( - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 15:39:37 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Lotus 1-2-3 and WYSIWYG Add-in MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sat, 16 Feb 2002 14:36:54 +1300 (NZDT) 1 day 09h47m33s ago ... On Thu, 14 Feb 2002 17:49:21 +0200, Daniel Hertrich wrote: > Hi friends, > > I have tried to install the version 2.4 of Lotus 1-2-3 on > my palmtop and have a problem with it: >> If I start it with 123.exe, it tries to load the WYSIWYG > addin and only displays a text cursor and doesn't react to > keystrokes anymore. I see what I did now - I deleted all the wysiwyg stuff in my palmtop install. Saves a whale of space. I never print anyway so never want to get what I see. If you have it, I think it wants to make special fonts for your printer, which take up even more room. > If I start with 123.exe -ctextmode, it doesn't try to load WYSIWYG, but > says "invalid configuration file". I can't find the "-c" option in my book (Mary Campbell's 123 release 2.4). It says choose Display Mode Text. > I HAVE used install.exe to specify my hardware (I have > choosen CGA monochrome and a Canon BJ-10 printer as text > and graphics printer). Seems OK. Did you make special fonts too? Maybe with wysiwyg you can't have monochrome? I'm not sure. Possibly you would need to ativate EMS as well. > Two questions: > 1. Does WYSIWYG work at all on the palmtop? If yes, what do I have to > do to make it work? I don't know the answer to this. Technically I think it could work, according to my book. I didn't expriment with it because I didn't like it even in VGA mode. Later ... I found the full set of files ... got same blank screen as you when I tried to have wysiwyg on palmtop. So, here, wysiwyg won't seem to work on the palmtop. I don't know why. The book says 8088 and cga should be fine. My blank screen just needs ctrl+alt+del to remove. > 2. I want to use 123.exe in pns200.ini to be able to point-and-shoot on > an 123 file for example in MM/LX. Ahha I answered this before and you the "-w" oprtion does indeed work with a pathname and all so will be fine for pns!! - Tony Hopefully someone else answers re the wysiwyg - maybe someone got it working. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 16:09:50 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: FLUFF: Al Chin in America MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sat, 16 Feb 2002 16:03:52 +1300 (NZDT) 2 days 21h38m59s ago ... On Wed, 13 Feb 2002 06:24:53 +0100, Nathalie Bugeaud said: > couldn't resist :) ... Add it to the quote gdb!! LOL! - Tony, who just found this in his "fluff" folder. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 11:47:03 +0800 Reply-To: SM Ling Sender: HPLX Mailing List From: SM Ling Subject: Re: Remcom & rc with 200lx MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Thanks everyone that responded. At last, I found my problem - it's the manual or maybe is ME. I wasn't typing the key on HP but the keypad for RC, and finally located the Learn function key for REMCOM. Now I can start doing the channels auto-scan stuff for the cable box, and my favorite TV stations. Looks like Remcom is doing better than RC. RC is detecting IR without remote key being pressed here. If successful, then maybe look into hacking the 200LX to extend its IR range, one day :-) Sorry for the bandwidth wastage. Thanks again. Cheers, Ling SM P.S. please mail me offlist if you are interested to have a copy of the final RC code (provided RC works here finally) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 15 Feb 2002 21:34:26 -0800 Reply-To: tghess@COMPUSERVE.COM Sender: HPLX Mailing List From: "Thomas G. Hess" Subject: Good News Bad News Re: HPLX200 not responding to keyboard MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit The news is mostly good! Last Sunday, 10 February 2002, I emailed the list that my keyboard had quit working. Within 20 minutes I received insightful, helpful, responses from the members of the list. Thanks to Walter, Fred and Al. Fortunately they were wrong. I didn't provide very accurate information. We all thought something had gone wrong with the hardware. But HP reliability prevailed. Tonight, I finally unplugged the machine and removed the main batteries. Before I pulled the backup battery I tried the on key. It worked, the machine was trying to reboot! The machine works. It responds to the keyboard. The problem was in the software not the hardware. Now the bad news, not really terribly bad. I am looking at a smaller different challenge. The machine crashed on the 10th. My most recent backup of the c: drive was from the 4th. Since the 10th, I have been using my backup machine. I have a backup of the c: drive on the backup as of earlier this evening. Do people have ideas, experience, or insights that they can share as how to best combine the files? A very happy Thomas G. Hess Olympia, WA USA ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 00:45:53 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: Re: Good News Bad News Re: HPLX200 not responding to keyboard Comments: To: tghess@COMPUSERVE.COM MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Greater minds than mine will have additional solutions. But I think you should specify which files you are refering to. For basic GDB, ADB, PDB files...Try the Files->Merge option in the menu of each application. (Never used them myself, but your manual should tell you the specifics.) Good Luck ! ----- Original Message ----- From: "Thomas G. Hess" To: Sent: Saturday, February 16, 2002 12:34 AM Subject: Good News Bad News Re: HPLX200 not responding to keyboard > The news is mostly good! > > Last Sunday, 10 February 2002, I emailed the list that my > keyboard had quit working. Within 20 minutes I received > insightful, helpful, responses from the members of the list. > Thanks to Walter, Fred and Al. Fortunately they were wrong. I > didn't provide very accurate information. We all thought > something had gone wrong with the hardware. But HP reliability > prevailed. > > Tonight, I finally unplugged the machine and removed the main > batteries. Before I pulled the backup battery I tried the on > key. It worked, the machine was trying to reboot! The machine > works. It responds to the keyboard. The problem was in the > software not the hardware. > > Now the bad news, not really terribly bad. > > I am looking at a smaller different challenge. The machine > crashed on the 10th. My most recent backup of the c: drive was > from the 4th. Since the 10th, I have been using my backup > machine. I have a backup of the c: drive on the backup as of > earlier this evening. Do people have ideas, experience, or > insights that they can share as how to best combine the files? > > A very happy > Thomas G. Hess > Olympia, WA USA > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 00:56:40 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: Re: Good News Bad News Re: HPLX200 not responding to keyboard Comments: To: tghess@COMPUSERVE.COM MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Thomas, One other thing I should mention. I avoid the entire backup issue mostly by storing all my files on my removable A: drive. While it is slower, it is generally more reliable and stable than the C: drive. ( I realize this is not exactly the problem you have, but I thought I would throw this out there anyway) I am probably alone in this, as I do not have additional RAM upgrades and speed has never been a problem for me on my single speed unit. (A load time of a few extra seconds never concerns me). I try to place as few files on my C Drive as possible and therefore only need to backup system boot files on those rare instances that they change. Plus with a CF card reader or Notebook computer I can backup the A drive in a snap (which I rarely do...yeah,yeah, I know I should backup more often.8-). A good A drive directory structure, combined with some VERY simple macros, allows me relatively quick access to a myriad of database files and gives me excellent stability even when I have to reboot unexpectedly. That is one of the MAJOR advantages of the database engine....it saves pretty much everything it possibly can to disk by saving records everytime they change. In my opinion the weakest link is the volitile C Drive...which is no longer a problem for me. Just my additional 2 cents. ----- Original Message ----- From: "Thomas G. Hess" To: Sent: Saturday, February 16, 2002 12:34 AM Subject: Good News Bad News Re: HPLX200 not responding to keyboard > The news is mostly good! > > Last Sunday, 10 February 2002, I emailed the list that my > keyboard had quit working. Within 20 minutes I received > insightful, helpful, responses from the members of the list. > Thanks to Walter, Fred and Al. Fortunately they were wrong. I > didn't provide very accurate information. We all thought > something had gone wrong with the hardware. But HP reliability > prevailed. > > Tonight, I finally unplugged the machine and removed the main > batteries. Before I pulled the backup battery I tried the on > key. It worked, the machine was trying to reboot! The machine > works. It responds to the keyboard. The problem was in the > software not the hardware. > > Now the bad news, not really terribly bad. > > I am looking at a smaller different challenge. The machine > crashed on the 10th. My most recent backup of the c: drive was > from the 4th. Since the 10th, I have been using my backup > machine. I have a backup of the c: drive on the backup as of > earlier this evening. Do people have ideas, experience, or > insights that they can share as how to best combine the files? > > A very happy > Thomas G. Hess > Olympia, WA USA > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 22:24:37 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: FLUFF: Al Chin in America MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sat, 16 Feb 2002 21:42:28 +1300 (NZDT) 2 days 16h44m58s ago ... On Wed, 13 Feb 2002 10:57:30 -0500, Eduardo Seudsnimo wrote: > BTW: You're gonna start another 'please don't use curse > words' flame war. Last time the flames were over a fairly innocuous definition of fubar, the etymology of which is to be found online in the renowned "Hacker's Dictionary". This time Nathalie is merely quoting well known people, and the humour is so well calculated . And it is so funny Nat "couldn't resist" - no one will flame her ;-) - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 12:24:23 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Lotus 1-2-3 and WYSIWYG Add-in MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Tony On Sat, 16 Feb 2002 14:00:02 +1300, Tony Hutchins wrote: > 123 -wDaniel > > will load DANIEL.WK1 THANKS! That's it. Now I can use 1-2-3 with PNS200! Needed a little bit memory tweaking (maxdos etc.), but now it works fine. I can now add wk1 links to my MindMaps, for example. :-) > I am not sure if the file needs to be in the default > directory, or whether you can give it a path as well. Hope I can give it a path, it seems. > I forget how I stopped wysiwyg loading for example :( I stopped it this way: I called 123 -csomthing (i.e. with a non-existent or invalid config file), which caused 1-2-3 to show me a message about an invalid config file _in_text_mode_. Then I went to worksheet/global/defaults and created a new config file. Now it doesn't try to start WYSIWYG anymore. But one question remains: How can I make WYSIWYG work on the palmtop? Thanks a lot, Tony, you are the best! :-) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 13:31:17 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: OT Re: email->sms In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable Le Wed, 13 Feb 2002 08:13:17 +0100 Radek Svagr a =E9crit: > Not an email-sms, but may help: WWW.MTNSMS.COM it can send nearly all > networks around the world. Needs registration. =2E.."nearly all > networks around the world", but not in France... :-( You must know that all French GSM operators are trying to block SMS coming this kind of sites... The only reliable way I found is to ask to your correspondent to create an e-mail account to his GSM provider (SFR, Orange or Bouygues). which permits to receive e-mail arrival notification by SMS. Then you can send them an e-mail, with the real message as the subject...=20 Beware about the fact that Bouygues put a lot of text around the mail subject in the SMS, then you must write a very short message (about 50 characters IIRC... :-( ) Jacques. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 17:18:38 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: Good News Bad News Re: HPLX200 not responding to keyboard MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > I try to place as few files on my C Drive as possible On top of that, the huge (and I mean that, no winbloat to clutter things up) 32 MB A drive easily has space for a Folder named "c" to take the complete folders structure of C. For me C is for three things only: - an AUTOEXEC not calling 700 (or 200) for large DOS programs - the mandatory _DAT folder - Nettamer and datafiles for the inbuilt comms program, as using a modem card means nor having the A drive. (And using GSM where a phone line is to be had costs real money.) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 08:33:45 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Lotus 1-2-3 and WYSIWYG Add-in MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sun, 17 Feb 2002 07:42:02 +1300 (NZDT) 08h17m39s ago ... On Sat, 16 Feb 2002 12:24:23 +0200, Daniel Hertrich wrote: > THANKS! That's it. Now I can use 1-2-3 with PNS200! Great! > But one question remains: > How can I make WYSIWYG work on the palmtop? It suddenly dawned on me - Avi will know the answer to this. If it can be done, Avi will have done it. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 21:19:43 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Re: Any way to download font into LX videocard? Comments: To: Dzon MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Well, I dug up the freeware Czech dictionary from freedict etc. (going on a tgree weeks holiday to the Czech Republic this summer) Then I translated the character set a bit before I understood the Freedict character mapping ( I should RTFM...) Using 'KEYBEZ CZ' on the LX now gives me a Czech-English and vice-versa dictionary online. Does this somehow answer your question? Do you want me to send you the C-E dictionary? Michel ----- Original Message ----- From: "Dzon" To: Sent: Friday, February 15, 2002 9:05 AM Subject: Any way to download font into LX videocard? > Hello there, > since here in Czech Republic we use more than one coding scheme for our > national characters İGates on his own uses two schemes at once in his > Windoze -- pc latin2 and cp1250, and there are two more I am or was using > regularly¨, I would be glad if I could run some old national applications > İlike dictionary¨ which uses other scheme than LX does, with readable > national letters. > > Any way to download font into LX videocard İideally temporarily, or not > residentally to 'switch' codings¨? > > Thanks > > -- > -Dzon > dzon@softhome.net > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 09:25:29 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Lotus 1-2-3 and WYSIWYG Add-in MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sun, 17 Feb 2002 09:14:32 +1300 (NZDT) 09h50m09s ago ... On Sat, 16 Feb 2002 12:24:23 +0200, Daniel Hertrich wrote: > How can I make WYSIWYG work on the palmtop? Daniel, I knew this had been raised before - sure enough 3 years ago, on this hplz-l!! No answer then though. Now that we have more storage available, someone may be able to get it working. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 09:25:34 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: OT Re: email->sms MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sun, 17 Feb 2002 09:18:12 +1300 (NZDT) 07h46m55s ago ... On Sat, 16 Feb 2002 13:31:17 +0100, Jacques Belin wrote: > The only reliable way I found is to ask to your correspondent > to create an e-mail account to his GSM provider (SFR, > Orange or Bouygues). which permits to receive e-mail arrival > notification by SMS. Then you can send them an e-mail, with > the real message as the subject... Thanks Jacques - that indeed seems to be the only way. And, then the receiver pays per SMS notification :( - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 22:06:53 +0100 Reply-To: furlan@gmx.net Sender: HPLX Mailing List From: "Dr. Werner Furlan" Organization: OE9FWV Subject: Re: Remcom & rc with 200lx Comments: To: SM Ling MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT hi Ling, On 15 Feb 2002 at 14:34, SM Ling wrote: > Does anyone has success with the IR remote controller software with > 200LX? I tried both remcom and RC already, but both NG here. > > I have been playing with for a while, but could not confirm is the > problem lies in my operation, or the software, or the remote > controller themselves (yes, I tried a few controllers here - Thomson > TV, cable boxes, toshiba TV) . > > I tried learning different key, but each time the recorded file show > the same information and also havng the same size when I tried doing > long sequences of key. > > Unfortunately, the manuals of both software is too encrypt for me. > > Any hints? > for me it worked from the beginning, I started with a Philips TV, Sat RX, several other TV's, a toy fire brigade remote control and even the car key from a friend of me (Citroen older type) worked ;-) The operation of the program is not so tricky IMHO, maybe you can check if there is any output from your palmtops IR light using a video camera. How do you learn new keys? The palmtop I used is a 8MB DS 200 LX. Werner -- Powered by Pegasus Mail - free at http://www.pmail.com Homepage: http://www.qsl.net/oe9fwv SMS: +436646340014@text.mobilkom.at ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 00:55:30 +0100 Reply-To: Jacques Belin Sender: HPLX Mailing List From: Jacques Belin Subject: Re: OT Re: email->sms In-Reply-To: <20020216202138.70C78D1A26@deborah.paradise.net.nz> MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable Le Sun, 17 Feb 2002 09:25:34 +1300 Tony Hutchins a =E9crit: > Thanks Jacques - that indeed seems to be the only way=2E And, > then the receiver pays per SMS notification :( As far I know, we never pay anything when we _receive_ SMS=2E=20 Even when we are outside France=2E :-)=20 (at least for the Bouygues subscribers=2E For Orange and SFR, I don't know= =2E=2E=2E) Of course, if you want to see the full text of the message corresponding to the notification, you will be assured to pay much more=2E=2E=2E ;-) Jacques=2E ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 16:04:06 -0800 Reply-To: Bulent Bicioglu Sender: HPLX Mailing List From: Bulent Bicioglu Subject: Around the world... In-Reply-To: <20020217003126.0E6D.JBELIN@altern.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Is there a database available somewhere including replies of palmtoppers? __________________________________________________ Do You Yahoo!? Yahoo! Sports - Coverage of the 2002 Olympic Games http://sports.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 00:57:42 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: OT Re: email->sms MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > As far I know, we never pay anything when we _receive_ SMS. That depends. Of my two email providers, one sends notification as straight SM (not SMS - they don't send the complete service to me), which is free now, but they have already said they will be charging once they have found a way to do it. The other sends an email to my phone providers email-SMS gateway. These I will have to pay my SMS provider for and they are only forwarded after I have applied for that service. Nothing is free - and if it is made to look like it was, the one paying will have reason to hide his motive (mostly spam and advertising). ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 21:28:29 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: ICQ and MSN Messenger clients for the LX Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Is there anyone? Does anybody knows a program that can act like these two (only for chat and messages, I don't expect video conferencing :) Dario -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup 1 cent a minute calls anywhere in the U.S.! http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 21:43:13 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Re: ICQ and MSN Messenger clients for the LX Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 I found one for ICQ at: http://members.tripod.com/~ladsoft/lsicq/index.htm I don't know if it will work on the LX. -----Original Message----- From: Dario Draiman Date: Sat, 16 Feb 2002 21:28:29 -0500 To: HPLX-L@UConnVM.UConn.Edu Subject: ICQ and MSN Messenger clients for the LX > Is there anyone? Does anybody knows a program that can act like these two (only for chat and messages, I don't expect video conferencing :) > > Dario > > > -- > > _______________________________________________ > Sign-up for your own FREE Personalized E-mail at Mail.com > http://www.mail.com/?sr=signup > > > 1 cent a minute calls anywhere in the U.S.! > > http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup 1 cent a minute calls anywhere in the U.S.! http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 16 Feb 2002 20:44:08 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: Re: French - English/English - French dictionary software (free?) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Alan Striegel: >Does anyone know of some program or database for the HPLX to >help with translating English to French and the reverse? there are the Collins 5-language and MINI-DICT programs >My family is taking a trip to Paris in April and I want some >help reviving or replacing long-dormant French-speaking brain cells. just Paris? Nathalie ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 08:14:18 +0100 Reply-To: furlan@gmx.net Sender: HPLX Mailing List From: "Dr. Werner Furlan" Organization: OE9FWV Subject: Re: OT Re: email->sms MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT hi all, On 17 Feb 2002 at 9:25, Tony Hutchins wrote: > > The only reliable way I found is to ask to your correspondent > > to create an e-mail account to his GSM provider (SFR, > > Orange or Bouygues). which permits to receive e-mail arrival > > notification by SMS. Then you can send them an e-mail, with > > the real message as the subject... > > Thanks Jacques - that indeed seems to be the only way. And, > then the receiver pays per SMS notification :( > this has to be determined. It is not the case in my account with A1 Net in Austria. I have to enable the Email - SMS Gateway (can be done by sending an SMS to a special number) After this the reception of email-SMS is possible and free for the receiver. The email address is +43664XXXXXXX@text.mobilkom.at. This is the case also for other phone providers in Austria, but the procedure to register is different with them. With Max Mobil the message has to contain a registration number as subject, so it is not so easy to send SMS via email. You have to remember this number and the subject must only be this number. With One and Telering I do not know. If you are abroad you have routing costs though, but inside Austria the service is free for the recipient. regards, Werner The best way will be to -- Powered by Pegasus Mail - free at http://www.pmail.com Homepage: http://www.qsl.net/oe9fwv SMS: +436646340014@text.mobilkom.at ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 02:56:10 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: Re: ICQ and MSN Messenger clients for the LX Comments: To: Dario Draiman MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Good question.... If the answer is "no", does anyone know if these protocols are open-spec and where they could be found? ----- Original Message ----- From: "Dario Draiman" To: Sent: Saturday, February 16, 2002 9:28 PM Subject: ICQ and MSN Messenger clients for the LX > Is there anyone? Does anybody knows a program that can act like these two (only for chat and messages, I don't expect video conferencing :) > > Dario > > > -- > > _______________________________________________ > Sign-up for your own FREE Personalized E-mail at Mail.com > http://www.mail.com/?sr=signup > > > 1 cent a minute calls anywhere in the U.S.! > > http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http:// www.getpennytalk.com > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 09:03:34 +0100 Reply-To: Michael Berrier Sender: HPLX Mailing List From: Michael Berrier Subject: PIM & PE A. Garzatto MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi, first of all thanks to Daniel Hertrich for helping me to install PE & PIM on the LX. Daniel, I'm still struggling with getting both running together. Each of them runs fine, but not together. I receive the message that another DOS is opened and I have to close it. Is anybody there who can help me out ? regards, Michael Berrier ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 23:14:33 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: PIM & PE A. Garzatto MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sun, 17 Feb 2002 22:52:30 +1300 (NZDT) 01h48m56s ago ... On Sun, 17 Feb 2002 09:03:34 +0100, Michael Berrier wrote: > Each of them runs fine, but not together. Michael, I reply to your message using PE. Right now I can launch PIM by pressing CTRL+ENTER (i.e. press CTRL and hold it and press ENTER while still holding CTRL) This is the way to launch PIM. That is, run PE and press CTRL+ENTER to launch PIM. ESC takes you back to PE. CTRL+ENTER takes you to PIM. You don't even have to be looking at a "PIM" file in PE, to launch PIM itself. From PE: To see a menu of PIM files press F6. Another handy thing is to press CTRL-X P to put PE into PIM mode. For example I can now press CTRL-X P and then Fn+Date - and up pops the nice little PIM calendar for the month. Maybe you are running PE from Sysmanager and when you try to launch PIM there is not enough memory?? Try terminating sysmanager and running PE, and PIM, just to see if everything is set up right. Hope this helps, - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 14:15:12 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: PIM & PE A. Garzatto MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Michael Berrier wrote: > > first of all thanks to Daniel Hertrich for helping me to install > PE & PIM on the LX. > > Daniel, I'm still struggling with getting both running together. > Each of them runs fine, but not together. I receive the message > that another DOS is opened and I have to close it. Is anybody > there who can help me out ? Get the latest PIM/PE version from www.dasoft.com - I remember that older PE versions complained about open instances of PE sessions. Then empty your /temp directory and check if you have PIM files with a "$" in their extension sitting in your palmtop - delete them as well. Reindex your PIM files from plain DOS with c:\path\pim -r and then try to run PIM from within PE. HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 09:05:21 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: FLUFF: Al Chin in America MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Tony Hutchins wrote: > Last time the flames were over a fairly innocuous definition > of fubar, the etymology of which is to be found online in the > renowned "Hacker's Dictionary". This time Nathalie is merely > quoting well known people, and the humour is so well > calculated . And it is so funny Nat "couldn't resist" - > no one will flame her ;-) I agree with everything you say. I also think Nathalie's joke was wonderfully funny. I even sent copies to my Dad and my Sister, with a little trepidation in her case because I know she dislikes that kind of language and that word in particular. She didn't reply yet so I'm not sure ..... :) But I think the issue is what we want this list to be like. Some people might think that kind of talk is ok now. Probably not, right after the previous discussion. But who knows! There are other funny jokes. I think it was ok the way it was used. But I wish it had been softened a little for the sake of this list. Not that I softened it when I sent it to my Dad or my former Sister. :) Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 18:29:56 +0200 Reply-To: daniel.hertrich@GMX.DE Sender: HPLX Mailing List From: Daniel Hertrich Subject: Off Topic: OB 800 partitioning problem Linux/Windows MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sorry folks, forgive me this off topic posting, but I know here are some Omnibook users, too, and maybe just YOU know the answer... My problem: I have upgraded my OB 800CT with a 10GB hard drive and installed Linux on it, with the plan in mind to install Windows, too. I created the following partitions: hda1: 1.5GB FAT32 for Windows hda4: extended partition containing the following: hda5: Linux 20 MB ext2 /boot hda6: Linux swap 80 MB hda7: Linux 5 GB ext3 / hda8: lInux 3 GB ext3 /hda8 Installing Linux on hda5 and hda7 was no problem at all, also hda8 is accessable without any problem (although it is beyond the 8 GB limit of the BIOS - Linux works around this). The machine boots nicely with Lilo in the MBR. Well, I now wanted to install Windows. :-( First, I tried to boot from a DOS 7 boot disk. No luck. I got "booting from diskette", the head moved a bit on the diskette around, then stopped, diskette still spinning, but no DOS came up. After much trial-and-arror I found out that when I deleted hda1, I could boot again from a DOS disk. So DOS seems to look at the partition table even when booting from diskette and see if it is OK. So I deleted hda1 and booted to DOS 7. Then I created with DOS fdisk a new primary DOS partition, made it bootable, restarted to boot from diskette. Same as above. Booting wasn't possible. Then I mounted the hard disk in my desktop Linux/Windows box and fdisked and formatted hda1 there, moved system files onto hda1 and made it bootable. Mounted it in my Omnibook and booted - again: didn't continue to boot after a certain time. So, what can I do? I don't want to remove Linux again to FIRST install Windows and THEN lInux. I would like to install Windows withot having to recreate all partitions. BTW: I have BIOS version 2.01.00 01/16/98 Does anyone have an idea how to solve my problem? Thanks in advance daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 21:23:05 +0200 Reply-To: daniel.hertrich@GMX.DE Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, I have done a little more research on this problem now. I have deleted all partitions on the hard drive and wanted to install everything from scratch. So, I put in my DOS 7 boot disk which I usually use to prepare any hard disk for Windows 95 or 98 and booted. Fine. Then I used fdisk to create a primary 1.5GB FAT32 partition (also tried FAT16). Then I rebooted, and THE PROBLEM REAPPEARED!!! That means, as soon as a primary partition is on the drive, DOS won't boot from diskette anymore. But with linux partitions and with the extended DOS partition, there was never any problem! Reminder: The BIOS of the 800CT doesn't support larger drives than 8 GB, but if all DOS / Windows stuff is inside this limit, everything should work, I have been told. Linux can handle all the space, even beyond the 8 GB limit, fine. I have seen that. So, maybe there are some DOS experts out there who know what DOS is checking for on the drive if it boots from diskette? What could cause DOS to hang before the message "MS-DOS is booting" or, in DOS7, "Windows 95 is booting" appears? As I see it now, I will not be able at all to install Windows on my Omnibook, only Linux. That's not such a big problem for me, but it wold be better to have a Windows system available if I need one. Thanks a lot daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 21:26:24 +0100 Reply-To: Juan Belmonte Sender: HPLX Mailing List From: Juan Belmonte Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Don't say SORRY for this off topic, it's why the friends are for... And this list's subscribers have high knowledge about DOS... First: Make sure of: The FAT32 partition it's below the 8gb barrier. As you know, hda1 means first logical partition but not physicaly at begin. Second: Make sure DOS does not see no more than 8gb. Try this: Setting up in BIOS as 8Gb only. Probably no problem with Windowz and I think no problem with Linux. Again, sorry for my bad english Juan Belmonte ----- Original Message ----- From: "Daniel Hertrich" To: Sent: Sunday, February 17, 2002 5:29 PM Subject: Off Topic: OB 800 partitioning problem Linux/Windows > Sorry folks, forgive me this off topic posting, but I know here are > some Omnibook users, too, and maybe just YOU know the answer... > > My problem: > > I have upgraded my OB 800CT with a 10GB hard drive and installed Linux > on it, with the plan in mind to install Windows, too. > > I created the following partitions: > > hda1: 1.5GB FAT32 for Windows > hda4: extended partition containing the following: > hda5: Linux 20 MB ext2 /boot > hda6: Linux swap 80 MB > hda7: Linux 5 GB ext3 / > hda8: lInux 3 GB ext3 /hda8 > > Installing Linux on hda5 and hda7 was no problem at all, also hda8 is > accessable without any problem (although it is beyond the 8 GB limit of > the BIOS - Linux works around this). The machine boots nicely > with Lilo in the MBR. > > Well, I now wanted to install Windows. :-( > First, I tried to boot from a DOS 7 boot disk. No luck. I got "booting > from diskette", the head moved a bit on the diskette around, then > stopped, diskette still spinning, but no DOS came up. > After much trial-and-arror I found out that when I deleted hda1, I > could boot again from a DOS disk. So DOS seems to look at the partition > table even when booting from diskette and see if it is OK. > > So I deleted hda1 and booted to DOS 7. Then I created with DOS fdisk a > new primary DOS partition, made it bootable, restarted to boot from > diskette. > > Same as above. Booting wasn't possible. > > Then I mounted the hard disk in my desktop Linux/Windows box and > fdisked and formatted hda1 there, moved system files onto hda1 and > made it bootable. > > Mounted it in my Omnibook and booted - again: didn't continue to boot > after a certain time. > > So, what can I do? > I don't want to remove Linux again to FIRST install Windows and THEN > lInux. I would like to install Windows withot having to recreate all > partitions. > > BTW: I have BIOS version 2.01.00 01/16/98 > > Does anyone have an idea how to solve my problem? > > Thanks in advance > daniel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 21:41:14 +0100 Reply-To: hpstaber@COMPUSERVE.COM Sender: HPLX Mailing List From: HP Staber Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Ulrich Allen wrote: > > Thanks for your reply, John. > It's a pity. Is it possible to do homebanking with > Windows CE? What about Psion? I tried today with PocketIE on my J720 running WinCE 3.0 and failed. PocketIE was unable to resolve htts://... And I had to soft-reboot to recover. My bank requires IE or Netscape. HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 21:48:56 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit On Sun, 17 Feb 2002 21:26:24 +0100, Juan Belmonte wrote: > Don't say SORRY for this off topic, it's why the friends are for... Thanks, Juan! > First: Make sure of: The FAT32 partition it's below the 8gb barrier. > As you know, hda1 means first logical partition but not physicaly at begin. It's also physically the first one. I made sure with linux fdisk, which lets me explicitly set the used cylinders. I tried cylinder 1 .. 3048 (1.5 GB). > Second: Make sure DOS does not see no more than 8gb. It doesn't. I see it when I start fdisk in DOS and it reports the disk space to be 8.08 GB or something like that. > Try this: Setting up in BIOS as 8Gb only. Probably no problem with Windowz > and I think no problem with Linux. The BIOS of the Omnibook does this automatically. I cannot set anything regarding the hard drive in the BIOS, except the boot order. :-( DOS seems to see the hard drive as 16 heads 63 sectors 16384 cylinders (or similar, 16xxx) and linux fdisk reports 16 heads 63 sectors 19485 cylinders. The abt. 3000 cylinders more seem to be the 2 extra GB which Linux can use. > Again, sorry for my bad english Don't say sorry! :-) Your contribution is always welcome,important is only that everyone interested in the subject knows what you mean. And that is not a problem at all here. As far as I can tell, your English is actually quite good. ;-) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 15:05:02 -0600 Reply-To: Theodore Heise Sender: HPLX Mailing List From: Theodore Heise Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Sun, 17 Feb 2002, Daniel Hertrich wrote: > The BIOS of the Omnibook does this automatically. > I cannot set anything regarding the hard drive in the BIOS, except the > boot order. :-( Some BIOS also have an option for whether or not to seek the floppy at boot, in addition to selecting boot order. -- Ted Heise West Lafayette, IN, USA ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 20:16:28 -0500 Reply-To: Zaaap Sender: HPLX Mailing List From: Zaaap Subject: Re: ICQ and MSN Messenger clients for the LX In-Reply-To: <20020217024313.7021.qmail@mail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit LSICQ does work with the 200lx!, albeit clunky compared to what you are used to w/ICQ. Its been a good while since I've actually used it though. I remember the biggest challenge was getting the dial-up part working. Mostly I played with it for the simple "look what else I can do with my LX" ego trip. Just goes to show... another facet of an already multifaceted machine. Dario Draiman wrote: (02/16/2002 21:43) =>I found one for ICQ at: http://members.tripod.com/~ladsoft/lsicq/index.htm => =>I don't know if it will work on the LX. => =>-----Original Message----- =>From: Dario Draiman =>Date: Sat, 16 Feb 2002 21:28:29 -0500 =>To: HPLX-L@UConnVM.UConn.Edu =>Subject: ICQ and MSN Messenger clients for the LX => => =>> Is there anyone? Does anybody knows a program that can act like these two (only for chat and messages, I don't expect video conferencing :) =>> =>> Dario =>> =>> =>> -- =>> =>> _______________________________________________ =>> Sign-up for your own FREE Personalized E-mail at Mail.com =>> http://www.mail.com/?sr=signup =>> =>> =>> 1 cent a minute calls anywhere in the U.S.! =>> =>> http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com =>> =>> =>> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml =>> =>> => =>-- => =>_______________________________________________ =>Sign-up for your own FREE Personalized E-mail at Mail.com =>http://www.mail.com/?sr=signup => => =>1 cent a minute calls anywhere in the U.S.! => =>http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com => => =>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 17 Feb 2002 21:40:42 -0500 Reply-To: Eduardo Seudsnimo Sender: HPLX Mailing List From: Eduardo Seudsnimo Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows Comments: To: daniel.hertrich@GMX.DE Comments: cc: omnibook@elektro.cmhnet.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Try the omnibook mailing list: omnibook@elektro.cmhnet.org > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On Behalf Of > Daniel Hertrich > Sent: Sunday, February 17, 2002 11:30 AM > To: HPLX-L@uconnvm.uconn.edu > Subject: Off Topic: OB 800 partitioning problem Linux/Windows >=20 >=20 > Sorry folks, forgive me this off topic posting, but I know here are > some Omnibook users, too, and maybe just YOU know the answer... >=20 > My problem: >=20 > I have upgraded my OB 800CT with a 10GB hard drive and installed Linux > on it, with the plan in mind to install Windows, too. >=20 > I created the following partitions: >=20 > hda1: 1.5GB FAT32 for Windows > hda4: extended partition containing the following: > hda5: Linux 20 MB ext2 /boot > hda6: Linux swap 80 MB > hda7: Linux 5 GB ext3 / > hda8: lInux 3 GB ext3 /hda8 >=20 > Installing Linux on hda5 and hda7 was no problem at all, also hda8 is > accessable without any problem (although it is beyond the 8 GB limit = of > the BIOS - Linux works around this). The machine boots nicely > with Lilo in the MBR. >=20 > Well, I now wanted to install Windows. :-( > First, I tried to boot from a DOS 7 boot disk. No luck. I got "booting > from diskette", the head moved a bit on the diskette around, then > stopped, diskette still spinning, but no DOS came up. > After much trial-and-arror I found out that when I deleted hda1, I > could boot again from a DOS disk. So DOS seems to look at the = partition > table even when booting from diskette and see if it is OK. >=20 > So I deleted hda1 and booted to DOS 7. Then I created with DOS fdisk a > new primary DOS partition, made it bootable, restarted to boot from > diskette. >=20 > Same as above. Booting wasn't possible. >=20 > Then I mounted the hard disk in my desktop Linux/Windows box and > fdisked and formatted hda1 there, moved system files onto hda1 and > made it bootable. >=20 > Mounted it in my Omnibook and booted - again: didn't continue to boot > after a certain time. >=20 > So, what can I do? > I don't want to remove Linux again to FIRST install Windows and THEN > lInux. I would like to install Windows withot having to recreate all > partitions. >=20 > BTW: I have BIOS version 2.01.00 01/16/98 >=20 > Does anyone have an idea how to solve my problem? >=20 > Thanks in advance > daniel >=20 > -- > http://www.daniel-hertrich.de/contact >=20 > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml >=20 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 04:18:44 +0000 Reply-To: fjkaufman@WORLDNET.ATT.NET Sender: HPLX Mailing List From: "F. Kaufman" Subject: Re: ICQ and MSN Messenger clients for the LX Comments: To: Dario Draiman MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit > I found one for ICQ at: http://members.tripod.com/~ladsoft/lsicq/index.htm > > I don't know if it will work on the LX. I may be offbase (not unusual) but is IRC (Internet Relay Chat) similar? If so www/lx has a separate module that does allow that: IRC/LX We are pleased to offer this client to D&A Software customers. IRC stands for Internet Relay Chat. This program lets you have "chats" with other people who are logged in to the Internet at the same time. This product requires a license for WWW/LX Plus. IRC/LX also requires a separate registration, available upon payment of the license fee, USD 24.95. You can order this product by downloading the Order Form, filling out your order, and sending it to D&A Software. You may email the form to the address on the form, or print it out and fax it to us at the numbers on the form. The download of the program is available here. ftp://ftp.dasoft.com/pub/WWW/irclx.zip ........................................... And I apologize if I'm all wet (expected in Seattle in any event) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 05:56:16 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: Re: FLUFF: Al Chin in America MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit >Nat "couldn't resist" - no one will flame her ;-) i guess my "resistance-level" is quite low and i need a top-up IV :) any doctors on the list? as for flames, the main person i quoted warmheartedly thanked me for misquoting him :) ... Hobchi found it too funny to cry foul i am expecting flames from another front though - the Bob's LXUSERS.GDB has been doubled with my additions :) ... i had no time to write to everyone for permission (btw. where does Ed Keefe live?) getting warmer ... __o Regards from _(\<._ Nathalie in (_)/ (_) France ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 05:56:56 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: Re: Around the world... MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Bulent Bicioglu: >Is there a database available somewhere including replies of palmtoppers? it is in progress, if you can't wait for the merger with Daniel's creation, ask bob@palmtop.com nat ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 01:51:53 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Re: homebanking with hplx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable HP Staber/Salzburg wrote: That's very interesting. A friend of mine has had no luck with his Psion 5m(?) so far. He was told to use Opera. But even that didn't work. It's a pity that there is no way for our loved hplx - just to show it to them. Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 08:16:30 +0100 Reply-To: Juergen Korthof Sender: HPLX Mailing List From: Juergen Korthof Subject: AW: French - English/English - French dictionary software (free?) In-Reply-To: <001001c1b77c$c639f7c0$e4eaf8c1@oemcomputer> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > Alan Striegel: > >Does anyone know of some program or database for > the HPLX to > >help with translating English to French and the reverse? > > there are the Collins 5-language and MINI-DICT programs I just put together three Language-Files from my REX. English-French, English-Spanish and English-German. Its a collection of phrases and sentences in plain text the way you find it in Travellerguides. This may be one of the best... Paris is very expensive! > I cannot afford the prices here. = Je n'ai pas les moyens d'acheter les choses ici. please feel free to download from http://www.eu-vorteile.de/hplx/dict.zip Happy LXing Juergen. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 08:49:44 +0100 Reply-To: furlan@gmx.net Sender: HPLX Mailing List From: "Dr. Werner Furlan" Organization: OE9FWV Subject: Ericson T68 and IR MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT hello all, a friend of me has a new Ericsson T68 GPRS Handy. I tried to go online with my HP200 via Infrared but so far failed. The IR connection worked, but in the LCP dialog I got only many arrows up and down. Can anyone tell me if there is a special Initstring, Baudrate or so necessary? Could the problem be due to EMI? My settings were: www/lx V. 2 Baud 38.400 - 115.200 AT&F Chap script. thanks, Werner -- PGP-Key: http://www.qsl.net/oe9fwv/furlan.asc SMS: +436646340014@text.mobilkom.at Powered by Pegasus Mail - free at www.pmail.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 08:52:30 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Re: French - English/English - French dictionary software (free?) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Juergen Korthof wrote: > I just put together three Language-Files from my REX. > > English-French, English-Spanish and English-German. > Its a collection of phrases and sentences in plain text > the way you find it in Travellerguides. Are they probably copyrighted? Do we run any legal risks using them? Is this why they all start with: "I want a lawyer" ????? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 08:57:15 +0100 Reply-To: Dzon Sender: HPLX Mailing List From: Dzon Subject: Re: Any way to download font into LX videocard? In-Reply-To: <010a01c1b727$45816500$24683b3e@bel> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII I don't use KEYBEZ on my LX and I don't want to use it. I imagine things this way: I'll run my dictionary thru some BAT file like this: -- setfnt kam.fnt İKamenicti coding scheme¨ dict setfnt pc2.fnt İLatin 2 coding scheme¨ -- where setfnt just loads font into videocard. No resident part needed. I could write it myself, but I need some info like Interrupt XXh does this or Write this on those ports İwith info how to use it¨ or Load font to this address İwhich is read-only on desktop¨. If I couldn't find this info, I'll debug keybez or programs like that :) -- -Dzon dzon@softhome.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 09:46:32 +0100 Reply-To: Juergen Korthof Sender: HPLX Mailing List From: Juergen Korthof Subject: AW: French - English/English - French dictionary software (free?) In-Reply-To: <001b01c1b851$377d39e0$c7b43b3e@bel> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > > English-French, English-Spanish and English-German. > > Its a collection of phrases and sentences in plain text > > the way you find it in Travellerguides. > Michel Bel wrote: > Are they probably copyrighted? Do we run any legal > risks using them? > Is this why they all start with: "I want a lawyer" > ????? perhaps... but look: they all end with "Where do I transfer?" I think they mean to transfer it to the HPLX, what else? :-) Please find it out for yourself and please give me a note, if it is illegal to write the REX-Note to a Text-File. I cannot find any copyright-claim. Here are the Original-Sources: http://www.xircom.com/dl/detail/0,1306,0-0-1_41Z0-0-1_1-338Z,0 0.html http://downloadfinder.intel.com/scripts-df/Product_Filter.asp? ProductID=650 Happy LXing Juergen. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 04:37:01 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: 200LX Database Format Question. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Does anyone know what the Record Header Status of "03" means? I know that: 00= Normal 01= Garbage 02= Modified but I cannot find any documentation on what 03 is supposed to be and I seem to find it only in some of my VIEWPTTABLE records. (I have several that are status 03 and one that is status 02 (modified). Any info on what 03 means (and also what exactly GARBAGE means for that matter !) would be greatly appreciated. Thanks ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 23:40:58 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: ANN:ROBOWEB/LX version 1.3 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Mon, 18 Feb 2002 23:16:04 +1300 (NZDT) Download latest ROBOWEB/LX from: http://www.geocities.com/aghutchins/ PRESSE.O and RWEB.O have all the latest digs, including 2 different ones for Die Welt, several for Die Presse, The Onion, hv.hot, moreover.com. The one for "The Onion" requires rwonion.txt for human readable labels. The dig for hv.hot requires adjustment for your hv.hot path. See RWHIST.DOC for changes. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 11:37:04 +0100 Reply-To: Juan Belmonte Sender: HPLX Mailing List From: Juan Belmonte Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit "Daniel Hertrich" wrote: > It's also physically the first one. I made sure with linux fdisk, which > lets me explicitly set the used cylinders. I tried cylinder 1 .. 3048 > (1.5 GB). OK > It doesn't. I see it when I start fdisk in DOS and it reports the disk > space to be 8.08 GB or something like that. It do İsee¨, but not show. > The BIOS of the Omnibook does this automatically. > I cannot set anything regarding the hard drive in the BIOS, except the > boot order. :-( Maybe you need to write a small program in ASM and load in MBR to change BIOS parameters. A long long time ago I was see a similar prog... but no idea where is... sorry. > DOS seems to see the hard drive as > 16 heads > 63 sectors > 16384 cylinders (or similar, 16xxx) change SEEMS to NEEDS > and linux fdisk reports > 16 heads > 63 sectors > 19485 cylinders. This also see DOS but not capable to interpret correctly Also you can use Ontrack DiskDriveOverlayİtm¨ so Windows and DOS see İand use¨ full hard drive İbreak the 8Gb barrier¨. With this you can upgrade an old Pentium with a brand new 20Gb hdd İI did this a month ago¨. I remember: It's free and supported if you purchase a Seagate hdd. But you can use with other hdd brands but not supported at all. I want to read your comments... Juan Belmonte . ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 14:04:59 +0100 Reply-To: HP Staber Sender: HPLX Mailing List From: HP Staber Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Juan Belmonte wrote: > > First: Make sure of: The FAT32 partition it's below the 8gb barrier. > As you know, hda1 means first logical partition but not physicaly at begin. Daniel, try FAT16 for your primary partition. You might also browse to hp.com and ask their online tech support. HP Staber/Salzburg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 07:08:35 -0600 Reply-To: Theodore Heise Sender: HPLX Mailing List From: Theodore Heise Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows In-Reply-To: <200202181304.g1ID4Gf07114@statler.a1plus.at> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII One other thought came to me on this, don't know if it's relevant. See the post below. Ted From: S. Widlake (s.widlake@rl.ac.uk) Subject: Re: partitioning hard drive with DOS fdisk Newsgroups: comp.os.msdos.misc, comp.os.linux.setup Date: 1998/04/30 In article <3547F02D.DD58A788@kingwall.se> Urban Domeij writes: >Urban Domeij wrote: >> There is one more possibility to use FDISK, which is >> not covered by the documentation, and that is replacing >> the master boot record of the first hard drive. This is >> done with FDISK /MBR and doesn't give any output. This command is DELIBERATELY undocumented. You can all draw your own conclusions on that ! What this command actually does is rewrite the mbr CODE without affecting the Partition Table ENTRIES... Unless the mbr Boot Signature is missing... IF this signature IS missing, it rewrites the mbr code and WIPES OUT the Partition Table entries ! This is rather useful if you want to quickly refresh a used HHD for reuse but "a bit of a bugger" when used on any system where this was not the intention and the Boot Signature had been modified. İ This is unlikely as most modern PC CMOS's will check for this Boot Signature and won't boot from the hard drive if it isn't intact. However, some PC's do not perform this check AND there are always 'smartarses' around with boot diskettes and their 'smart' ideas. ¨ >> The MBR option effectively removes any boot sector >> virus, but it can be disastrous if you have an unusual >> boot sector as from some boot manager programs. You are right to a certain extent... see again above. >> (then it may effectively wipe out all your data) I think that needs to be EMPHASISED: ALL YOUR DATA ! >Before S Widlake stomps on my fingers Hey there, what's with the 'preemptive strike' ? ;-) >I'll also say, that if a boot sector virus has stored >your allocation tables at some offset that is unreachable >from a clean boot, You mean: if an HDD-MBR/FDD-DBR infecting virus has relocated and/or encrypted and/or modified the MBR's Partition Table entries in ANY way such that the hard drive's Partition Volumes are not ALL accessable from a clean boot, >then your data goes to the bit-bucket if you use >FDISK /MBR You can expect some - sometimes TOTAL - data loss ! Apart from the details/terms used, We agree on this. >... maybe it is a better idea to use a good anti-virus >program for removing viruses ... Up to about a year ago I would have strongly agreed with this... BUT then I had little problem... Using even the 'BEST' anti-virus software to remove some viruses resulted in DATA LOSS !!! Using FDISK /MBR removed these viruses resulting in NO data loss :-) The AV-SW companies - Dr Solomon's Software, Frisk International, MakeAfee, etc, etc - KNOW that ALL of their software is this fundamentally flawed though they have NOT, and are NOT likely to remedy this ! So which would 'you' use to disinfect MBR viruses ? FDISK /MBR or 'good' anti-virus software ? 'In one hand you have a gun with four blank and two live bullets in it and in your other hand you have a gun with two blank and four live bullets in it !' So... ... LEFT or RIGHT ?!? Choose one ! Actually, it depends almost entirely on the virus ! Anyone want to make such a deffinative virus list ? I'll start it off with: RIPPER - You have already been shot and it hurts... >Urban Neat ending to a terrible thread. S.;-) -- - .sig II Found and Restored... ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 14:16:36 +0100 Reply-To: konstantin.witzleben@GMX.DE Sender: HPLX Mailing List From: "Konstantin v. Witzleben" Subject: Deleting entries in Quicken MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi all! I have the following problem using Quicken on may 200LX. If I wanna adelete an entry in one of my accounts, my LX always suffers a complete breakdown. The only way to restart is to press Shift, Control, On. Did anybody already make such experiences in Quicken? Any idea? Grateful for any help. Konstantin, Berlin ------- Konstantin v.Witzleben Phone +49 172 7924787 mailto: konstantin.witzleben@gmx.de -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 12:33:43 -0500 Reply-To: "Striegel, Alan" Sender: HPLX Mailing List From: "Striegel, Alan" Subject: Re: French - English/English - French dictionary software (free?) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" >From: Nathalie Bugeaud İmailto:tps-seti@WANADOO.FR¨ >Sent: Saturday, February 16, 2002 2:44 PM >... > >My family is taking a trip to Paris in April and I want some > >help reviving or replacing long-dormant French-speaking brain cells. > >just Paris? Well, we have six days in April to enjoy this. Isn't there enough in Paris to fill that time? I'm open to suggestions as well, but our itinerary isn't entirely up to me. My whole family (parents, 5 siblings and their spouses) is making this trip. By the way, I downloaded the 'Fentent' package from SUPER and found it does a passable job for on-the-street translations. The loading time on a single-speed 200LX is two minutes (!) but after that it performs reasonably. Alan Striegel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 11:50:00 -0800 Reply-To: Joseph.Buford@HSC.COM Sender: HPLX Mailing List From: Joseph Buford Subject: Geneology Question Comments: cc: TCU549@AOL.COM MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii I belive that Kat Doyle had a question some time back about using a geneoplogy program on the 200lx. I use Family Scrap Book. It works well on the 200lx in spite of the lack of support from the author, Chris Long. What other geneology programs are used on the 200lx? Joe ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 13:15:18 -0700 Reply-To: jaevans@codenet.net Sender: HPLX Mailing List From: John_Evans Subject: Re: Geneology Question Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii I have installed the DOS version of Personal Ancestral File (PAF for DOS) and though it will not import a gedcom file on the 200LX (it bombs out, most likely due to a 286 specific instruction) it works just fine for reviewing data in a portable format. It complains during installation, but seems to work fine. I don't use it for data entry, but end up using the DOS version on my PC when importing gedcoms, then I merely copy the PAF data file(s) over to the 200LX. john ---------- Original Message ---------------------------------- From: Joseph Buford >What other geneology programs are used on the 200lx? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 13:51:39 -0800 Reply-To: Victor Roberts Sender: HPLX Mailing List From: Victor Roberts Subject: Re: Around The World Info Comments: To: hplxmail@yahoo.com MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit On Tue, 12 Feb 2002 08:28:52 -0800 (PST), hplxmail@yahoo.com wrote: > Victor Roberts wrote: > > > Perhaps Fred and I are related in some distant way > > Scary thought. > > Certainly is! I feel the chill already (and I am in SoCal > where temps today are waaaay summery!) Question is who should > be scared - you, Fred, or us? > > Noticed you enumerated other places you lived in and I realie > that my next address will be the 50th address in my life. > > Avi I assume you are about 50 years old or so. If so, you have moved, on average, about once per year. You must not play well with the other children . Or else you have a strong desire to experience life in lots of different places. Vic Roberts ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 12:33:42 +1300 Reply-To: Roger Whitmarsh Sender: HPLX Mailing List From: Roger Whitmarsh Subject: Re: GeneAlogy Question MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Joseph asked: >What other geneology programs are used on the 200lx? I use PAF 2.31 on my 200LX as my primary geneAlogy database for reference and data entry. It runs very well on the LX. You can also use PAF 3.0, which has some nice features, but it runs incredibly slow, even on a DS, so I don't use it. The 200LX is perfect for genealogy, BTW, as it can be smuggled into repositories that don't allow computers, runs for days without the battery dying, and is easy to carry. You can even put it back in your pocket while you go to get another reference item, if you're worried about theft. Try and do that with a laptop. With my tiny Pentax PocketJet printer (from my other pocket), I can even print PAF reports right there in the repository if I want to. I also use the built-in database to record my research activities and to-do's,and the books and microfiche in my Family History collection, and I use 1-2-3 to keep track of my photos and documents, Not to mention the addresses of repositories and FH contacts in the Phone Book, and details of meetings and lectures in the Appointment Book. There are complete Family History/Genealogical packages that do all of these things in an integrated way, such as The Master Genealogist, but these of course only run on the Dark Side. If you do want to use any of these packages, the GEDCOM file (a standard-format dump of the genealogical data) from PAF on the LX, will be accepted into most other packages without problems. Sorry for the over-enthusiastic ramble, but although I originally bought my LX solely for genealogy and Family History research, like most of us on this list, I now use it for almost everything in my life and couldn't live without one. Cheers...Roger ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 23:58:31 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Minnesota-bound MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > >>> Jo Buford asked me why you were moving. > > that's an easy one must be for a woman Moving for a job, and a better lifestyle. I am sure there are many women in Minnesota _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 07:58:00 +0200 Reply-To: davidb@netmedia.net.il Sender: HPLX Mailing List From: David Becher Subject: Re: ICQ and MSN Messenger clients for the LX Content-transfer-encoding: 7BIT Zaaap writes: > LSICQ does work with the 200lx!, albeit clunky compared to what you > are used to w/ICQ. > > Its been a good while since I've actually used it though. I remember > the biggest challenge was getting the dial-up part working. Mostly I > played with it for the simple "look what else I can do with my LX" > ego trip. > > Just goes to show... another facet of an already multifaceted machine. > I had MICQ for dos once running on my palmtop. It uses the Wattcp stack (LXTCP) and I could see if peoplew were on line and could send them messages Chatting wasnt supported. It worked ok. -- ** David Becher ** davidb@netmedia.net.il davidb@cimatron.co.il ** www.cimatron.co.il ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 00:25:40 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: Datbase format question - repost MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0011_01C1B8DB.F5B84F50" This is a multi-part message in MIME format. ------=_NextPart_000_0011_01C1B8DB.F5B84F50 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I am reposting this message becuase the system seems to have lost my = previous post: Does anyone know what the Record Header Status of "03" means? I know that: 00=3D Normal 01=3D Garbage 02=3D Modified but I cannot find any documentation on what 03 is supposed to be and I = seem to find it only in some of my VIEWPTTABLE records. (I have several that = are status 03 and one that is status 02 (modified). Any info on what 03 means (and also what exactly GARBAGE means for that matter !) would be greatly appreciated. Thanks ------=_NextPart_000_0011_01C1B8DB.F5B84F50 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
 
I am reposting this message becuase = the system=20 seems to have lost my previous post:
 
 
Does anyone know what the Record Header Status of "03"=20 means?

I know that:

00=3D Normal
01=3D Garbage
02=3D = Modified

but I cannot find any documentation on what 03 is = supposed to be=20 and I seem
to find it only in some of my VIEWPTTABLE records.  = (I have=20 several that are
status 03 and one that is status 02 = (modified).

Any=20 info on what 03 means (and also what exactly GARBAGE means for = that
matter !)=20 would be greatly appreciated.

Thanks
------=_NextPart_000_0011_01C1B8DB.F5B84F50-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 18 Feb 2002 21:18:27 -0800 Reply-To: Marta Pierce Sender: HPLX Mailing List From: Marta Pierce Organization: Family Subject: dos bible software .... hisword MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit hello fellow palmtoppers :) Does anyone have the dos bible software (online bible for dos v 6.0) loaded onto their hp200lx? AND, are you using it with hisword or with the dos bible software it comes with. If you have already done the tedious work of getting the lexicons, and topical notes, and all the other stuff uncompressed and set up, would you mind sending me privately the files? I can't seem to set it up, and find it extremely frusterating. I understand that all this software is free, so I don't think I am asking for something illegal. I am just trying to get the bible on my hp200lx. I have hisword w/ AV, but want all the other files that go with it now. Thanks in Advance! -- Best regards, Marta mailto:Marta1@attbi.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 08:02:08 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: Minnesota-bound MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Avi, > > >>> Jo Buford asked me why you were moving. > > > > that's an easy one must be for a woman > > Moving for a job, and a better lifestyle. I am sure there are > many women in Minnesota There are indeed! But I thought you are looking for a better lifestyle . Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 11:24:17 +0100 Reply-To: Josef Meyer Sender: HPLX Mailing List From: Josef Meyer Subject: Re: Ericson T68 and IR Comments: To: "Dr. Werner Furlan" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Werner, I am quite sure that the T68m is to be handled the same way as the T39m/R520m. I brought a T68m to work uder the following conditions: You need a patched version of WWW/LX V.3, obtainable from D&A Software. Obviously the Ericsson GPRS mobile phone family has a interpretation of the PPP protocol different from the recommendations. The WWW/LX patch is a workaround for this. Dr. Werner Furlan wrote: > The IR connection worked, but in the LCP dialog I got only many > arrows up and down. This is the behaviour of the not patched version. > Can anyone tell me if there is a special Initstring, Baudrate or so > necessary? Baudrate, init, etc. are o.k. You have to add some additional items (see my settings below): Magic=0 ; for the patched www.exe Port=-1 OmniGo=0 PPP=1 Modem=1 Baud=38400 My_IP= ; depends from operator DNS_IP= ; depends from operator DNS2_IP= ; depends from operator Script=CHAP_Script Login=gprs ; depends from operator ModemInit=ATZ Dial=ATD*99***1# ; depends from phone settings Password=xxxx ; depends from operator In your mobile you have to define a GPRS account (->Settings->Data Comm.) according to your network operator. If you have defined this and check your phone's GPRS settings, you will see a line with 'CID=1'. This is the context identifier and the '1' in the WWW/LX Dial=ATD*99***1# refers to this CID. So if your CID=2, your www.cfg has to be Dial=ATD*99***2#, etc. > Could the problem be due to EMI? No, EMI is not makes only small disturbances. BR / Josef Meyer ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 11:48:11 -0600 Reply-To: Leo Bellantoni Sender: HPLX Mailing List From: Leo Bellantoni Subject: FLUFF - Around The World In-Reply-To: <0GRR00ECJKMTL3@smtp.fnal.gov> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Uh, folks, We are ALL related to each other, if ya go far enough back. Leo ------------------------------------------------------------------------------- Leo Bellantoni MS 231, FermiLab Batavia, IL 60510 Pager:(630)266-3803 "The more I use computers, the more I like pencils." ------------------------------------------------------------------------------- Avi wrote: > Victor Roberts wrote: > > > Perhaps Fred and I are related in some distant way > > Scary thought. > > Certainly is! I feel the chill already (and I am in SoCal > where temps today are waaaay summery!) Question is who should > be scared - you, Fred, or us? > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 14:14:56 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: POST/LX 2.2f - Error writing file Comments: To: Helge Holm MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hi Helge, > I have Post set up to collect mail from 4 accounts from 3 different = ISPs. It has been working perfect for more than a year until last week. > Now 2 of the accounts which are set up to 1 ISP (sensewave) results in = the following: > > "Error > Error writing file > (returned:-2 instead of 2) > ok" Seems maybe you messed up the setup and moved files, especially the .i or .o files. Don't! > Needless to say I don't findt this "ok", can anybody help me out here? Needless to say! , but then if the program told you what it really felt about what you did to it, it would be worse ... Seriously, the message notifies you there is a SERIOUS error, and that it has NO IDEA how to fix it, and that it basically brings it to your attention to start looking for a solution - which is exactly what you did. At least you and the program cooperate still The .i, .o, .i1, and .o1 etc contain information that is important to the program in terms of what is on the file, where etc. It is not a good idea to move files around in the middle of operation - check in the Post/LX Help for what these files do. You can delete them and let Post/LX recreate them, but Post/LX chokes when it finds bad info in them. Good luck. Avi M. İD&A¨ http://www.dasoft.com _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 14:14:58 -0500 Reply-To: hplxmail@YAHOO.COM Sender: HPLX Mailing List From: A Meshar Subject: Re: Goin' Postal and POST/LX Comments: To: Dario Draiman MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable There were several excellent posts in the past comparing Postal and Post/LX and NetTamer... > Which is the best? I cannot provide an unbiased opinion, I sell Post/LX ... Avi _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 21:21:45 +0100 Reply-To: Yves Leurquin Sender: HPLX Mailing List From: Yves Leurquin Subject: Re: Lotus 1-2-3 and WYSIWYG Add-in MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > > > How can I make WYSIWYG work on the palmtop? > I am not sure about WYSIWYG but IMPRESS ver 2.0 which was shipped with = 123 or available as a separate add-in DOES work on the HP200LX with Lotus 123 = ver 2.2. The whole setup takes about 2 MB. \/ /ves _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 21:29:15 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Lotus 1-2-3 and WYSIWYG Add-in MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Yves On Tue, 19 Feb 2002 21:21:45 +0100, Yves Leurquin wrote: > I am not sure about WYSIWYG but IMPRESS ver 2.0 which was shipped with 123 or > available as a separate add-in DOES work on the HP200LX with Lotus 123 ver > 2.2. What is IMPRESS? GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 12:29:41 -0800 Reply-To: Mark Ackerman Sender: HPLX Mailing List From: Mark Ackerman Subject: wanted to buy - Grandview (prefer with documentation) Anyone want to part with their copy of Grandview? Mark ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 21:28:49 +0100 Reply-To: Thomas Rundel Sender: HPLX Mailing List From: Thomas Rundel Subject: Re: How do I reassemble the right hinge? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Daniel, first I'm sorry for the late reply, but I currently have a backlog of about 700 messages which piled up due to lots of work in December and January. Second, here is my entry for the users database - I hope it's not too late: Thomas Rundel Goeppingen, Germany Started with HP 48SX, then switched to 95LX, 100LX, and 200LX, and also used a 700LX for a while. Now using a 200LX 96MB DS. :-) Third, the actual question - yes the methof you described does work, Gottfried and I actually did it a couple of times. We used a strong string to compress the spring, assembled the hinge and then cut it, but one has to be very careful to remove all of the spring after that. I had one hinge break after a few weeks because some residue of the string made it too tight. Thomas > Hi Russell > > On Mon, 28 Jan 2002 15:01:20 -0800, Russell Richter = wrote: > > > I bought a replacement screen cover from Thaddeus in anticipation of = the > > day when I would need it. Well, that dreaded day has arrived. The = big > > question for me is how do I reassemble the right hinge when I = replace the > > cover? > > > Is there some special method to make it easier? Are there special = tools > > required? > > You need special tools. > Have you ever disassembled a right hinge? I have and I know now that I > should not have done this! It is _extremely_ tricky to reasseble. You > need at least very small but strong fingers, some inches of thin = string > (to compress the spring - compress it, asseblbe the hinge and then > somehow cut the string from outside, so the spring can work again). > > This is how I tried - and failed. :-( > > I even doubt that people at Thaddeus or Tom Tundel are able to assemble > a right hinge. > > BUT: Some people said that they can work with their palmtops even > without the spring. I cannot really imagine how the screen case is = held > in its position then, but it SEEMS to be possible. Maybe with some > rubber or other material in the gap between the right hinge cap and = the > lower (keyboard) part of the case? > > GTX > daniel > > -- > http://www.daniel-hertrich.de/contact > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml -- Dipl.-Inform. Thomas Rundel Rundel Datentechnik, Rappenstr. 20, 73033 Goeppingen, Germany Phone +49-7161-156870, Fax +49-7161-1568711, www.rundel.net This message is transmitted on 100% recycled electrons. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 12:20:29 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: 123+wysiwyg? yes!! Fwd from Gottfried! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Daniel, I just tried this on the train here. Works like magic! Many thanks to Gottfried. --- begin of forwarded message --- Here they come, the instructions to make it working: 1. Install a full blown copy of Lotus 123v24. You may skip installing PrintGraph or tutorials and other stuff (you won't need them). I've installed a copy to my notebook and then copied all the files to my flash card. 2. Run INSTALL.EXE and change the screen settings to CGA. 3. Change Graphics screen to IBM/COMPAC HI-RES. 4. Run 123.EXE and the screen will crash with that little _ in the top left corner. Don"t worry, that's expected . 5. Wait a couple of seconds (4-10) before entering (which is the : (the wysiwyg command). 6. Now enter <7> (which translates to Diaplay Options Adapter CGA-Adapter) and your screen will reappear! 7. Don't stop here! you have to save your settings by entering (this time no translation, you see what you do ). 8. Now you're finished and you can enjoy a brand new feeling. Please feel free to forward these instructions to The List and to all these stockist people who want to stare at charts on their HP. I hope you'll do me that favor, because the lazy Swabian must hit the bed right now . Oh, just to mention: The full blown version of 123 works with EMS (Mack's driver TREMM will work flawlessly), but don't ask me if it works without (I don't want to change my running system ). Keep The List and me informed about your findings. Bye for now Gottfried --- end of forwarded message --- - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 17:39:03 -0700 Reply-To: "Robert K. Meyer" Sender: HPLX Mailing List From: "Robert K. Meyer" Subject: Re: dos bible software .... hisword Comments: To: Marta Pierce MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Online Bible must be 6.22. My setup includes a bunch of stuff including AV Lexicons Matthew Henry's notes Scofield's notes Wesley's notes Treasury of Scripture Knowledge HisWord is nice to take advantage of the larger screen fonts without having to pan. Starting point is v6.22. Make sure you have that first. You can do a simple install on a desktop to check or check -- BIBLE.EXE 62,562 05-29-96 8:54a. After that, I can give you any details you want to know. Bob Marta Pierce wrote: > > hello fellow palmtoppers :) > > Does anyone have the dos bible software (online bible for dos v 6.0) > loaded onto their hp200lx? AND, are you using it with hisword or with > the dos bible software it comes with. If you have already done the > tedious work of getting the lexicons, and topical notes, and all the > other stuff uncompressed and set up, would you mind sending me > privately the files? I can't seem to set it up, and find it extremely > frusterating. I understand that all this software is free, so I don't > think I am asking for something illegal. I am just trying to get the > bible on my hp200lx. I have hisword w/ AV, but want all the other files > that go with it now. > > Thanks in Advance! > > -- > Best regards, > Marta mailto:Marta1@attbi.com > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml -- R.K. Meyer MSEE K7PPC bmeyer@union-tel.com Elk Mountain WY http://w3.union-tel.com/~bmeyer/ His name... Isaiah 9:6 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 14:57:04 +1300 Reply-To: Tony Kan Sender: HPLX Mailing List From: Tony Kan Subject: Re: dos bible software .... hisword Comments: To: "Robert K. Meyer" MIME-version: 1.0 Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7bit I looked at HisWord a while back but the installation bamboozled me. i looked at the website for HisWord and online bible but got a bit lost. Can you give me some step by steps? eg. Download this from here. Type that to install. Download the next resource from there. Do this to install it... Thanks in advance Tony. PS. Anyone know where one can pick up resources for Wordsearch 2.2 for DOS eg. strong's concordance? Cheers Tony. > Date: Wed 20-Feb-2002 13:39 > To: HPLX-L@UCONNVM.UCONN.EDU (Tony Kan) > From: bmeyer@UNION-TEL.COM (Robert K. Meyer) > Subject: RE: dos bible software .... hisword > > Online Bible must be 6.22. My setup includes a bunch of stuff > including > > AV Lexicons Matthew Henry's notes Scofield's notes > Wesley's notes Treasury of Scripture Knowledge > > HisWord is nice to take advantage of the larger screen fonts without > having to pan. > > Starting point is v6.22. Make sure you have that first. You can do a > simple install on a desktop to check or check -- BIBLE.EXE 62,562 > 05-29-96 8:54a. After that, I can give you any details you want to > know. > > Bob > > Marta Pierce wrote: > > > > hello fellow palmtoppers :) > > > > Does anyone have the dos bible software (online bible for dos v 6.0) > > loaded onto their hp200lx? AND, are you using it with hisword or > with > > the dos bible software it comes with. If you have already > done the > > tedious work of getting the lexicons, and topical notes, and all the > > other stuff uncompressed and set up, would you mind sending me > > privately the files? I can't seem to set it up, and find it > extremely > > frusterating. I understand that all this software is > free, so I don't > > think I am asking for something illegal. I am just trying to get > the > > bible on my hp200lx. I have hisword w/ AV, but want all the > other files > > that go with it now. > > > > Thanks in Advance! > > > > -- > > Best regards, > > Marta mailto:Marta1@attbi.com > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > -- R.K. Meyer MSEE K7PPC bmeyer@union-tel.com Elk Mountain WY > http://w3.union-tel.com/~bmeyer/ His name... Isaiah 9:6 > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 01:20:01 -0300 Reply-To: "Eduardo Moreno A." Sender: HPLX Mailing List From: "Eduardo Moreno A." Subject: Re: GeneAlogy Question Comments: To: Roger Whitmarsh In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Ok, but.. Where i can found this version? On Tue, 19 Feb 2002, Roger Whitmarsh wrote: > Joseph asked: > >What other geneology programs are used on the 200lx? > > I use PAF 2.31 on my 200LX as my primary geneAlogy > database for reference and data entry. > It runs very well on the LX. > You can also use PAF 3.0, which has some nice > features, but it runs incredibly slow, even on a > DS, so I don't use it. > > The 200LX is perfect for genealogy, BTW, as it can > be smuggled into repositories that don't allow > computers, runs for days without the battery dying, > and is easy to carry. You can even put it back in > your pocket while you go to get another reference > item, if you're worried about theft. Try and do > that with a laptop. > With my tiny Pentax PocketJet printer (from my > other pocket), I can even print PAF reports right > there in the repository if I want to. > I also use the built-in database to record my > research activities and to-do's,and the books > and microfiche in my Family History collection, > and I use 1-2-3 to keep track of my photos and > documents, > Not to mention the addresses of repositories and > FH contacts in the Phone Book, and details of > meetings and lectures in the Appointment Book. > > There are complete Family History/Genealogical > packages that do all of these things in an > integrated way, such as The Master Genealogist, > but these of course only run on the Dark Side. > If you do want to use any of these packages, > the GEDCOM file (a standard-format dump of the > genealogical data) from PAF on the LX, will be > accepted into most other packages without > problems. > > Sorry for the over-enthusiastic ramble, but > although I originally bought my LX solely for > genealogy and Family History research, like > most of us on this list, I now use it for almost > everything in my life and couldn't live without > one. > > Cheers...Roger > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > =====__ |İ__¨|_\_==_ Eduardo Moreno Araya | 26 | 05 | emoreno@dim.uchile.cl (@)-----(@)... . -- .--. . .-. ..-. ..*\:{> PGP? : finger emoreno@dim.uchile.cl ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 23:01:57 -0600 Reply-To: Curtis Cameron Sender: HPLX Mailing List From: Curtis Cameron Organization: None Subject: Re: HP File Formats Comments: To: Tralornik In-Reply-To: <004f01c1b9b5$e02a6b20$146c580c@me> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi Tralornik, On Tue, 19 Feb 2002 21:25:33 -0500 you wrote: >Does anyone know what the Record Header Status of "03" means? > >I know that: >00= Normal >01= Garbage >02= Modified 03 is a binary combination of 01 and 02, so it's one that was modified and it's garbage. In fact, I don't recall seeing any that had both bits set, but as long as 01 is set, the record will be treated as garbage. >Any info on what 03 means (and also what exactly GARBAGE and MODIFIED means for that >matter !) it would be greatly appreciated. The garbage flag means that the record is set to be deleted. The LX files consist of many records, placed one immediately after the other. To delete one, it could just delete it, then move all the successive records back to take out the extra space. But doing this would take more time. So the LX software designers created a garbage flag, so the record could be kept in place until a convenient time to move all the rest of the data. In fact, when you modify a record, it marks the old copy, in the middle of the data file, as garbage, and appends a new copy of the record at the end of the file. Normally, I think the LX goes ahead and deletes it then, but if you have the FASTDB TSR installed, it waits until it exits the application and moves all of them at the same time, but then only if there are at least three (?) garbage records. The modified flag was intended to be used by a program that synchronizes or reconciles the data, but I don't think any software actually uses that bit, so I think all non-garbage records will have their modified bit set. I am planning to add that feature to my LX to Outlook converter, to make synchronizing more straightforward. Any time the LX creates or modifies a record, it will set the modified bit. The synch software would then clear that bit on all the records when it does its job, so that the next time you synch, it would be able to easily tell which records had been modified since the last synch. There's also a place in the database header record to hold the last reconcile (or synch) date. -- Curtis Cameron ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 06:01:18 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: REX and French dictionary software (free?) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Juergen: >This may be one of the best... Paris is very expensive! >I cannot afford the prices here = Je n'ai pas les moyens d'acheter les choses ici. maybe 'best' for you, but completely useless - no person with the 'right' mind in France will say that, unless they live under a bridge would you say: "Entschuldigen Sie Bitte, aber ich bin zu arm um was von Ihnen zu kaufen"? the best dictionary program for the LX, in my opinion, is still the 5-language Collins İi do run it under maxdos¨ Nathalie İi greatly appreciate Juergen sending me a REX3; so far the _only_ advantages to the LX i can see are 1.=size, and 2.=no dust under keyboard¨ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 06:02:12 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: GeneAlogy Question MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit >Roger Whitmarsh: >..and I use 1-2-3 to keep track of my photos and documents,.. i find Lotus to be more suitable for calculations and mathematical records keeper; all other d-base tasks can be done with the less memory-hungry GDB. why do you need 1-2-3 for photos? nat ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 08:22:44 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Deleting entries in Quicken MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Konstantin I'm not (yet) a Quicken user, so I don't know if this is a common problem. Anyway - here is a shot in the dark: On Mon, 18 Feb 2002 14:16:36 +0100, "Konstantin v. Witzleben" wrote: > I have the following problem using Quicken on may 200LX. > If I wanna adelete an entry in one of my accounts, my LX always suffers a > complete breakdown. The only way to restart is to press Shift, Control, On. Maybe the quicken data file is corrupt? 1. run chkdsk /f on the drive where the quicken file is stored if it doesn't complain about lost allocation units or crosslinked files, try 2. (don't know if this is possbible): Create a new file and merge the old one into the new one. This can eliminate corruptions in the file structure, since all records are read into a new file again. This is a common procedure with corrupt database files, so it may work for quicken files, too. ;-) Good luck! GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 10:39:02 +0100 Reply-To: radek.svagr@LGPHILIPS-DISPLAYS.COM Sender: HPLX Mailing List From: Radek Svagr Subject: OT: new poqet computers MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Can be interesting for somebody: http://www.datadog.com/p_surpl.html Radek ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 10:58:44 +0100 Reply-To: xmarc@free.fr Sender: HPLX Mailing List From: Marc BERLIOUX Subject: Re: dos bible software .... hisword In-Reply-To: <3C72F027.AA34C4C3@union-tel.com> Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Santa Klaus on a HP LX ? -- Marc BERLIOUX -- M.C.S.E - Minesweeper Consultant & Solitaire Expert - ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 13:43:27 +0100 Reply-To: Dzon Sender: HPLX Mailing List From: Dzon Subject: Ann: Czech İnot slovak¨ hfn and vfn fonts MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Hello czech hplx users! Since I couldn't find any usable hfn and vfn fonts with czech characters, I've made them myself. It is just original VirtualReader İmost of them¨ and hv İall of them¨ fonts included in installation, a bit :) modified. You can got them here: http://www.pikebo.cz/~dzon/hp_hfnczfonts.zip http://www.pikebo.cz/~dzon/hp_vfnczfonts.zip However I don't know how long it will stay there. Sorry slovak folks, but I was too lazy to play with your national character in every font file. If wanted, I can share my 'tool' to play with vfn -- it just converts between vfn and ascii İthe fastest way for me is to edit font in vi :)¨ I hope I am not doing anything illegal or anything vr/hv author doesn't want me to do. -- -Dzon dzon@softhome.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 14:03:32 +0100 Reply-To: Juergen Korthof Sender: HPLX Mailing List From: Juergen Korthof Subject: AW: REX and French dictionary software (free?) In-Reply-To: <005f01c1b9cf$e7bd5b80$9e21fac1@oemcomputer> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Natalie, thank you for your hint: > maybe 'best' for you, but completely useless - no > person with the 'right' > mind in France will say that, unless they live > under a bridge At all, i am not responsible for any translation-outcome. (For example, if they burn a dog when you order something at the Stand at the "Esplanade des Trocaderos" :-( > > would you say: "Entschuldigen Sie Bitte, aber ich > bin zu arm um was von > Ihnen zu kaufen"? Could be, i do! And i even would say things, i never write... (afterwards: "Children, don=B4t do that at home!") ...by the way, that would be a good start-sentence to do some haggle with the seller:-) For the Dictionary-User: Don=B4t trust strange translations! You never know what devilish the author had in mind! I do recommend, to say everything with a smile on your face;-) > the best dictionary program for the LX, in my > opinion, is still the > 5-language Collins İi do run it under maxdos¨ is it free? and if, where can we download? > Nathalie > > İi greatly appreciate Juergen sending me a REX3; so > far the _only_ advantages to the LX ... > i can see are 1.=3Dsize, and > 2.=3Dno dust under keyboard¨ ...are you angry? hmm..reducing the recognition of its talents to _size_ and _no_dust_ ... "sounds like a real "relation-crisis"! Did you ever be mistreated by a Rex in your childhood? Siegmund F." :-) Keep in mind: The Rex is not meant as a superior. It is a companion if you use for what it is build for. Happy LXing Juergen. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 07:13:24 -0600 Reply-To: Chris Lott Sender: HPLX Mailing List From: Chris Lott Subject: Re: dos bible software .... hisword In-Reply-To: <3C72F027.AA34C4C3@union-tel.com> from "Robert K. Meyer" at Feb 19, 2002 05:39:03 PM MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > > I understand that all this software is free, so I don't > > think I am asking for something illegal. I am just trying to get the > > bible on my hp200lx. I have hisword w/ AV, but want all the other files > > that go with it now. I don't remember about the program itself, but the various modern translations are not free. One has to purchase them at a nominal cost. -Chris Lott -- ************************************************************************ R. Christopher Lott, P.E. rclott@ro.com Alpha Beta Technologies, Inc. 3112 12th Ave S.W. PHONE: 256-534-9067 Huntsville, Alabama 35805 FAX: 256-534-9069 ************************************************************************ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 07:37:31 -0700 Reply-To: "Feldman, Robert" Sender: HPLX Mailing List From: "Feldman, Robert" Subject: Re: HP File Formats MIME-Version: 1.0 Content-Type: text/plain Pretty much the same way dBaseII handled deleted records, IIRC. They would be retained, but ignored, until you did a "Pack" command on the db. Bob -----Original Message----- From: Curtis Cameron İmailto:curtc@AIRMAIL.NET¨ Sent: Tuesday, February 19, 2002 11:02 PM To: HPLX-L@UCONNVM.UCONN.EDU Subject: Re: HP File Formats The garbage flag means that the record is set to be deleted. The LX files consist of many records, placed one immediately after the other. To delete one, it could just delete it, then move all the successive records back to take out the extra space. But doing this would take more time. So the LX software designers created a garbage flag, so the record could be kept in place until a convenient time to move all the rest of the data. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 09:52:26 -0500 Reply-To: Damond Walker Sender: HPLX Mailing List From: Damond Walker Subject: Re: OT: new poqet computers MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Seems to be a bit pricy....trolling ebay is a better bet... Damo ----- Original Message ----- From: "Radek Svagr" > Can be interesting for somebody: > > http://www.datadog.com/p_surpl.html > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 16:02:22 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: Charging again MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit So far, noone seems to have come around to answering my query. I'll just repeat the most important part: Does anyone know, what SMARTCHG.COM from the 700 LX ROM does exactly? Does it avoid overcharging when charging the phone in the HP cradle every evening? Danke Axel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 10:31:47 -0800 Reply-To: Nikolai Teleguine Sender: HPLX Mailing List From: Nikolai Teleguine Subject: Should I try to repair fading screen ? MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit My old 200LX developed a screen problem : right after power-up, screen looks fine, but almost immediately characters start to fade. In 10-15 seconds it becomes almost unreadable. Sometimes rocking the screen back and forth helps for a few seconds, but then it fades again. Pressing the spot to the left of the screen doesn't help. Has anyone seen similar problem ? What could be the reason ? Is it worth trying to repair it ? -- Best regards, Nikolai ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 11:21:51 -0500 Reply-To: Eduardo Seudsnimo Sender: HPLX Mailing List From: Eduardo Seudsnimo Subject: Does anyone have a copy? (RE: 123+wysiwyg? yes!! Fwd from Gottfried! In-Reply-To: <20020219231619.C36E4D21A8@deborah.paradise.net.nz> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable This is good news. I used to use Lotus 123 w/ wizzy wig and it was a = pretty good package at the time.=20 Does anyone have a copy they can upload to me? I can provide access to = an FTP server to receive uploads. I can prove I'm a legal owner of the = software as I have an entire package but with 5.25 disks. I never got a = 5.25 disk drive to install it. I can send digital pictures to prove I = really have the software.=20 Matter of fact: I think I bought it from a list member... I forget who = it was. regards > Subject: 123+wysiwyg? yes!! Fwd from Gottfried! >=20 >=20 > Daniel, >=20 > I just tried this on the train here. Works like magic! >=20 > Many thanks to Gottfried. >=20 > --- begin of forwarded message --- > Here they come, the instructions to make it working: snippo (5th marx brother) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 12:31:22 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: 256 meg Sandisk at Amazon for $99 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Amazon dropped their prices on 256 meg Sandisk cards to $99 since the last time I looked. I think they were $159 two weeks ago and even that was a really low price. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 19:50:27 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Should I try to repair fading screen ? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Nikolai On Wed, 20 Feb 2002 10:31:47 -0800, Nikolai Teleguine wrote: > My old 200LX developed a screen problem : > right after power-up, screen looks fine, > but almost immediately characters start to fade. > > In 10-15 seconds it becomes almost unreadable. > Sometimes rocking the screen back and forth helps > for a few seconds, but then it fades again. > Pressing the spot to the left of the screen > doesn't help. Thatsounds strange to me. I have nevr seen such a behaviour, and I cannot imagine what this can be caused by. Have you tried adjusting the contrast with On-+ and On-- (on-plus / on-minus)? It sounds a little bit like a cold soldering joint. Somewhere near the tempreture sensor which adjust the screen contrast to the outside temperature. Do you have soldering and hardware skills? Have you ever opened your palmtop? Can you somhow find out if the problem seems to be in the screen half of the palmtop or in the body half? Does pressing on the left side of the screen help? Does pressing _somwhere_ help? If yes, where? Have also a look on http://www.daniel-hertrich.de/repair and see if some tips there help. And please report. > Is it worth trying to repair it ? If it is POSSIBLE to repair it, it is definitely worth it. Replacement screens are very rare. But I suspect (it's just a feeling) that the problem is not really the screen itself, but that the problem is on the motherboard. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 13:09:37 -0600 Reply-To: Tim Sender: HPLX Mailing List From: Tim Subject: Re: 123+wysiwyg? yes!! Fwd from Gottfried! In-Reply-To: <20020219231619.C36E4D21A8@deborah.paradise.net.nz> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Is the "full" ver. of 123 that much different from what's on the palmtop? I bought ver 2.4 for DOS at a sale years ago, but never used it, thinking it would only be for a time when I wanted 123 on my desktop...... TIA, --tim ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 14:27:21 -0600 Reply-To: Theodore Heise Sender: HPLX Mailing List From: Theodore Heise Subject: Re: HP File Formats In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII This was my guess, but I held my tongue 'cause I knew Curtis would have the authoritative answer. Ted > From: Curtis Cameron İmailto:curtc@AIRMAIL.NET¨ > Sent: Tuesday, February 19, 2002 11:02 PM > The garbage flag means that the record is set to be deleted. The LX > files consist of many records, placed one immediately after the other. > To delete one, it could just delete it, then move all the successive > records back to take out the extra space. But doing this would take > more time. So the LX software designers created a garbage flag, so the > record could be kept in place until a convenient time to move all the > rest of the data. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 22:00:15 +0100 Reply-To: Tamas Feher Sender: HPLX Mailing List From: Tamas Feher Subject: LxPic under Windows NT - stability and VESA issues seem to be solved. MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Hello all, For those who also use LxPic on Windows NT/2000/XP desktop/laptop: You should disable loading of DOSX.EXE under Windows NT4 / 2000 when running LxPic 7.0 in order to prevent occasional system hangups and VESA access problems. A solution is to make a custom startup file for LxPic. Copy \windows_nt_directory\system32\autoexec.nt to lxpic's directory, rename it to lxpicenv.nt, edit it to comment out the dosx.exe line, then save file. Right-click lxpic.com, properties, program tab, press "Windows NT" button, specify .\lxpicenv.nt instead of autoexec.nt, OK to close, OK again. It may also be beneficial to hand-tune low memory to 160kbyte, disable all other kinds of memory, disable all fancy features (e.g. fast rom emulation, intelligent cut&paste, etc.) This process modified lxpic.pif and hopefully you can run LxPic now for hours without lockup. Added bonus: Since dosx.exe is not loaded, lxpic can access VESA screen modes unconditionally, just press . You can start it from Windows's Explorer or other file manager like WinCommander, etc. No need to manually open and maximize a DOS box for LxPic use with VESA. By the way, dosx.exe file adds DPMI (DOS Protected Mode Interface) support for the NTVDM (Windows NT's dos box). It would still be nice to find and eliminate the root cause of LxPic<-->NT-DPMI antagonism, because the above cumbersome procedure is in sharp contrast with lxpic's smooth operation under Win9x / real DOS - out of the box. Sincerely Yours: Tamas Feher. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 16:08:30 -0500 Reply-To: Nicholas Argyros Sender: HPLX Mailing List From: Nicholas Argyros Subject: FLUFF: 2002 Comments: To: tps-seti@WANADOO.FR Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable On February 20 this year at 8:02 pm an historic event in time will take=20 place. It will not be marked by the chiming of any clocks or the ringing of = bells, =20 but at that precise time, on that specific date, something will happen = which=20 has not occurred for 1,001 years and will never happen again. As the clock ticks over from 8.01pm on Wednesday, February 20, time = will,=20 for sixty seconds only, read in perfect symmetry 2002, 2002, 2002, or to = be=20 more precise - 20:02, 20/02, 2002. This historic event will never have the same poignancy as the 11th hour = of=20 the 11th day of the 11th month which marks Armistice Day, but it is an = event=20 which has only ever happened once before, and is something which will = never=20 be repeated. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 19 Feb 2002 21:44:05 -0700 Reply-To: ccohen5 Sender: HPLX Mailing List From: ccohen5 Subject: Banking on 200LX Comments: To: jmusielewicz@EARTHLINK.NET MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_004A_01C1B98E.8D5BC1E0" This is a multi-part message in MIME format. ------=_NextPart_000_004A_01C1B98E.8D5BC1E0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Your assessment is the same as mine. I had used the Citibank DOS = program since 1991 through last year when they (not I) discontinued the = facility. And no https for our machine as yet. Colin ------=_NextPart_000_004A_01C1B98E.8D5BC1E0 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable
Your assessment is the same as mine.  I had = used the=20 Citibank DOS program since 1991 through last year when they (not I) = discontinued=20 the facility.  And no https for our machine as yet.
 
Colin
------=_NextPart_000_004A_01C1B98E.8D5BC1E0-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 16:54:32 -0500 Reply-To: Eduardo Seudsnimo Sender: HPLX Mailing List From: Eduardo Seudsnimo Subject: Re: 123+wysiwyg? yes!! Fwd from Gottfried! In-Reply-To: <005701c1ba42$24972e60$6401a8c0@gadgetbase> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable The full version will use extended memory so that it load larger = spreadhseets. the wizzy wig stuff let's you do graphics that are nicer. = I think the help files are also better. I also got a version of quattro = and it looks more powerful but I don't have time to learn it. I can do = 123 in my sleep. > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On Behalf Of > Tim > Sent: Wednesday, February 20, 2002 2:10 PM > To: HPLX-L@uconnvm.uconn.edu > Subject: Re: 123+wysiwyg? yes!! Fwd from Gottfried! >=20 >=20 > Is the "full" ver. of 123 that much different from what's on the = palmtop? >=20 > I bought ver 2.4 for DOS at a sale years ago, but never used it,=20 > thinking it > would only be for a time when I wanted 123 on my desktop...... >=20 > TIA, >=20 > --tim >=20 > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml >=20 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 23:05:51 +0100 Reply-To: Malcolm Shewan Sender: HPLX Mailing List From: Malcolm Shewan Subject: Re: FLUFF: 2002 In-Reply-To: Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit on 02/20/02 10:08 PM, Nicholas Argyros at NARGYROS@MAIL.NYSED.GOV wrote: > On February 20 this year at 8:02 pm an historic event in time will take > place. > > It will not be marked by the chiming of any clocks or the ringing of bells, > but at that precise time, on that specific date, something will happen which > has not occurred for 1,001 years and will never happen again. > > As the clock ticks over from 8.01pm on Wednesday, February 20, time will, > for sixty seconds only, read in perfect symmetry 2002, 2002, 2002, or to be > more precise - 20:02, 20/02, 2002. > > This historic event will never have the same poignancy as the 11th hour of > the 11th day of the 11th month which marks Armistice Day, but it is an event > which has only ever happened once before, and is something which will never > be repeated. > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > This is a palindrome. Reads the same backwards and forwards. Apart from this, whoever wrote it is wrong about it's never going to be repeated. It WILL be repeated, exactly 20 seconds later: 20:02:20. Thus the palindrome will be: 20:02:20 20/02, 2002 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 18:30:38 -0500 Reply-To: Larry Tachna Sender: HPLX Mailing List From: Larry Tachna Subject: Re: FLUFF: 2002 Comments: To: Malcolm Shewan In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit >>> which has only ever happened once before, and is something >>which will never >>> be repeated. >>WILL be repeated, exactly 20 seconds later: 20:02:20. >>Thus the palindrome will be: 20:02:20 20/02, 2002 actually according to the news it will be repeated twice more once in 2012 and I don't remember the second time ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 15:39:51 -0800 Reply-To: Ian Butler Sender: HPLX Mailing List From: Ian Butler Subject: Re: FLUFF: 2002 In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Wed, 20 Feb 2002, Malcolm Shewan wrote: > This is a palindrome. Reads the same backwards and forwards. Apart > from this, whoever wrote it is wrong about it's never going to be > repeated. It WILL be repeated, exactly 20 seconds later: 20:02:20. > Thus the palindrome will be: 20:02:20 20/02, 2002 How is 20:02:20 20/02, 2002 a palindrome? Forward: 20022020022002 Reverse: 20022002022002 Almost a palindrome, but not quite, thanks to the addition of the seconds... ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 15:43:21 -0800 Reply-To: Ian Butler Sender: HPLX Mailing List From: Ian Butler Subject: Re: Any way to download font into LX videocard? In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Mon, 18 Feb 2002, Dzon wrote: > setfnt kam.fnt İKamenicti coding scheme¨ > dict > setfnt pc2.fnt İLatin 2 coding scheme¨ > > where setfnt just loads font into videocard. No resident part needed. There are a variety of resident fonts for the LX that do something similar to this, but the resident part is needed because otherwise (from what I understand) any time the screen mode changes (like when you start or exit a program) the LX overwrites the new font with its default font. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 20:26:50 -0500 Reply-To: David Heath Sender: HPLX Mailing List From: David Heath Subject: ONLINE BIBLE FOR DOS V6.0 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0128_01C1BA4C.ED7A9880" This is a multi-part message in MIME format. ------=_NextPart_000_0128_01C1BA4C.ED7A9880 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I am interested in the online bible software for DOS. Is this software = available free now? If so, does anyone know where it can be downloaded? Also, does it come with the lexicons, topical notes, etc.? Dave ------=_NextPart_000_0128_01C1BA4C.ED7A9880 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I am interested in the online bible = software for=20 DOS.  Is this software available free now?  If so, does anyone = know=20 where it can be downloaded?
 
Also, does it come with the lexicons, = topical=20 notes, etc.?
 
Dave
------=_NextPart_000_0128_01C1BA4C.ED7A9880-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 20:46:29 -0600 Reply-To: John LaMaide Sender: HPLX Mailing List From: John LaMaide Subject: Re: OT: new poqet computers Comments: To: radek.svagr@LGPHILIPS-DISPLAYS.COM MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit If someone would like a Poqet PC I have one with a 1 meg pc card and manual. I also made a serial cable for it. All for less then what the ad wants. Anyone interested e-mail me at lamaide@juno.com. John On Wed, 20 Feb 2002 10:39:02 +0100 Radek Svagr writes: > Can be interesting for somebody: > > http://www.datadog.com/p_surpl.html > > > Radek > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 21 Feb 2002 07:27:32 +0100 Reply-To: furlan@gmx.net Sender: HPLX Mailing List From: "Dr. Werner Furlan" Organization: OE9FWV Subject: OT: FTP question MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT hello Dos specialists, thanks for your attention. To process the directory of a ftp server, I wrote the following batch file: ftp -s:dir.txt > out.txt dir txt contains: open FTP.F-PROT.COM anonymous user@avp.ru cd pub dir bye The command works, but _IF_ the network connection is invoked by this command (Dial up network) the output file stays locked by the OS and cannot be processed later. (cannot be viewed by norton viewer for example) Happens in Win98SE, do not know if elswhere too. The program's purpose is the automatic update of f-prot virus scanner. cheers, Werner -- Powered by Pegasus Mail - free at http://www.pmail.com Homepage: http://www.qsl.net/oe9fwv SMS: +436646340014@text.mobilkom.at ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 21 Feb 2002 08:50:56 +0100 Reply-To: Dzon Sender: HPLX Mailing List From: Dzon Subject: two Database app question MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Hello there, I dare to look here for help with my builtin Database application problems. 1/ I've made new database which contains radio button group also. I fill up some data, THEN I decide to add one more radio button to the group. I did it, but when I use the one radio button, selected option doesn't appear on the right 'paper' İquick view or what¨ while the other radio buttons do. There is just empty space instead, but option really IS selected when I look at the record or use column view. Everything other behaves as the added option is added correctly. Where is the problem? 2/ Cool, the second problem I've just solved :) but the first is more important for me. Thanks for help -- -Dzon dzon@softhome.net ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 21 Feb 2002 22:38:39 +1300 Reply-To: Tony Kan Sender: HPLX Mailing List From: Tony Kan Subject: Re: ONLINE BIBLE FOR DOS V6.0 Comments: To: downeast@SURFBEST.NET MIME-version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit The software is available on Tom Hoover's website. Do a google search on HisWord and you'll find it there. Cheers Tony. > Date: Thu 21-Feb-2002 14:26 > To: HPLX-L@UCONNVM.UCONN.EDU (Tony Kan) > From: downeast@SURFBEST.NET (David Heath) > Subject: ONLINE BIBLE FOR DOS V6.0 > > I am interested in the online bible software for DOS. Is this > software available free now? If so, does anyone know where it can be > downloaded? > > Also, does it come with the lexicons, topical notes, > etc.? > > Dave ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 21 Feb 2002 09:03:13 -0500 Reply-To: Steve Sender: HPLX Mailing List From: Steve Subject: Re: Lotus 1-2-3 and WYSIWYG Add-in Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Daniel Hertrich wrote: > Hi Yves > > On Tue, 19 Feb 2002 21:21:45 +0100, Yves Leurquin > wrote: > > > I am not sure about WYSIWYG but IMPRESS ver 2.0 which was shipped with > > 123 or > > available as a separate add-in DOES work on the HP200LX with Lotus 123 ver > > 2.2. > > What is IMPRESS? > > GTX > daniel A product very similar to WYSIWYG that was used by Lotus in 1-2-3 version 2.2 until they replaced it with WYSIWYG in version 2.4. Steve ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 21 Feb 2002 11:50:21 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: HP200LX + NOKIA 6310 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable It might be of general interest: I am doing my first steps with the hp200lx and the cell phone Nokia 6310. So far I could run www/lx with a DLR-3 cable and the IR-Port. Distance about 10cm. Shorter distance causes interference to the data transfer. As yet I couldn't get a contact to the phonebook of the 6310 with the cable. That is certainly because I don't know the right commands. Are there others with experience to the same topic? Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 21 Feb 2002 18:06:37 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: HP200LX + NOKIA 6310 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Ulrich, > It might be of general interest: > I am doing my first steps with the hp200lx and the > cell phone Nokia 6310. > So far I could run www/lx with a DLR-3 cable and the > IR-Port. Distance about 10cm. Shorter distance causes > interference to the data transfer. > As yet I couldn't get a contact to the phonebook > of the 6310 with the cable. That is certainly > because I don't know the right commands. > Are there others with experience to the same topic? > Uli I am using the hp200lx with a 6210 and up to version 5.11 (Nokia) I can upload and download the phone entries. version 5.16 to 5.27 causes problems due to a know bug. Recently I used a 6310 for testing. I could upload and download the phone entries of the 6310 flawless (all IrDA). I used HSCSD 3 download, one upload channel (as well as 2 down and 2 up). It did work just flawless. It did behave like my 6210; no sw changes were required. Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 21 Feb 2002 18:07:42 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: HP200LX + NOKIA 6310 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > doing my first steps with the hp200lx and the > cell phone Nokia 6310. As for me, I find my combo of 700 LX plus 2110i hard to beat. But there too the software while supporting SMS very nicely does not allow access to the phone's memory. The AT commands are well documented - anyone in the mood to write a small DOS application? (All my programming so far is GFA and the 1stBASE report language on my Atari.) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 21 Feb 2002 18:36:50 +0100 Reply-To: "Oliver W. Leibenguth" Sender: HPLX Mailing List From: "Oliver W. Leibenguth" Organization: www.Compuseum.de Subject: Re: HP200LX + NOKIA 6310 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > As for me, I find my combo of 700 LX plus 2110i hard to beat. That's just right. The only drawback is the size of that combo. OTOH you don't have to worry about cables ;-) (And sometimes, a 700lx creates funny stories: This monday I received a call at work. Since I was in a hurry, I didn't detach the phone from the lx: So I pressed the whole gizmo to my ear when a guy asked me if "that thing" is one of these expensive Iridium-phones *bg) regards, Oliver BTW: I promised to take my lx apart to check for anything that might cause the low EMI-readings. Up to now, I wasn't able to take the shell apart. Maybe next weekend :-\ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 08:16:33 +1300 Reply-To: Roger Whitmarsh Sender: HPLX Mailing List From: Roger Whitmarsh Subject: Re: GeneAlogy Question MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Nathalie wrote: >i find Lotus to be more suitable for calculations >and mathematical records keeper; all other d-base >tasks can be done with the less memory-hungry GDB. >why do you need 1-2-3 for photos? Firstly because I already had my documents and photo catalogues in 1-2-3 on other platforms before I got my first LX, and secondly because I prefer the 1-2-3 column presentation and sorting functions. I know I could convert from 1-2-3 to .GDB but I can't be bothered for no great gain in usability. I'm happy to be persuaded if anyone feels strongly that .GDB is better. Cheers, Roger ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 11:13:19 -0700 Reply-To: "Robert K. Meyer" Sender: HPLX Mailing List From: "Robert K. Meyer" Subject: Re: dos bible software .... hisword Comments: To: Marta Pierce Comments: cc: Tony Kan MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Online Bible/HisWord Setup Part 1 Hope this helps. Here is a brief cryptic description of my setup. Below is a roughly a minimum install, not a full install. Directory of a:\bib AV BAD 183 01-01-97 12:00a AV BAT 191 10-21-01 4:15p AVI BAT 48 01-01-97 12:00a BIBLE EXE 62562 05-29-96 8:54a BIBLE INI 113 01-01-98 12:00a DIET DOC 2624 02-15-94 10:51a DIET EXE 23410 01-22-92 1:44a GILL MAP 3890 02-25-96 8:44p HISWORD EXE 49539 12-06-97 12:10p MAN DOC 191415 01-01-97 12:00a MESSAGES TXT 36189 01-01-98 12:00a MHCC MAP 3890 01-01-96 12:00a NOTES MAP 3888 01-01-96 12:00a PARAGRAP MAP 3888 09-18-90 12:00a SCOFIELD MAP 3890 12-21-95 8:27a SCREEN OPT 65 01-01-97 12:00a TSK MAP 3890 08-20-94 1:33p UED BAT 18 01-01-97 12:00a VERSION DOC 27138 05-29-96 9:11a WESLEY MAP 3890 01-01-96 12:00a _AV BAT 496 01-01-97 12:00a _BIBLE EXE 10438 03-27-95 10:35a __FILES LST 2860 07-20-94 12:06p -- R.K. Meyer MSEE K7PPC bmeyer@union-tel.com Elk Mountain WY http://w3.union-tel.com/~bmeyer/ His name... Isaiah 9:6 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 20 Feb 2002 11:13:24 -0700 Reply-To: "Robert K. Meyer" Sender: HPLX Mailing List From: "Robert K. Meyer" Subject: Re: dos bible software .... hisword Comments: To: Marta Pierce Comments: cc: Tony Kan MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Online Bible/HisWord Setup Part 2 With a 128MB flash, I am not using diet. Searches and notes run faster without diet. I originally set up the program on a desktop, then copied to the LX and changed the batch file drive references. On the path in my C drive to execute the programs... --- b.bat --- a: cd\bib call av c: --- hw.bat --- @echo off echo off cls rem A:\BIB\diet -z > nul A:\BIB\hisword A:\BIB\AV rem A:\BIB\diet -zr >nul On the A drive not on the path... --- hw.bat --- @echo off echo off cls rem A:\BIB\diet -z > nul A:\BIB\hisword A:\BIB\AV rem A:\BIB\diet -zr > nul --- av.bat --- @echo off echo off cls rem A:\BIB\diet -z > nul A:\BIB\BIBLE D=A:\BIB\AV BW %olb% %1 %2 %3 %4 %5 %6 %7 %8 %9 if errorlevel 1 set olb= if errorlevel 1 pause rem A:\BIB\diet -zr > nul --- avi.bat --- :Hot key Alt-B for OLB TSR CALL A:\BIB\_av 2096 --- ued.bat --- c:\uty\nce.com +%1@echo off --- _av.bat --- echo off cls rem rem $ 1 - Hot Key Number - Delay Value rem rem Specify a delay value only if your Word Processor rem needs it e.g. Q&A, Professional Write rem rem example _SCHOLAR 2092-5 rem Hot Key = 2092 (ALT-Z on my keyboard) rem Delay = 5 (5 delay times seems to work well) rem if %1x == x A:\BIB\_BIBLE A:\BIB\AV "Enter Hotkey:" "Enter Passage:" if not %1x == x A:\BIB\_BIBLE A:\BIB\AV %1 "Enter Passage:" -- R.K. Meyer MSEE K7PPC bmeyer@union-tel.com Elk Mountain WY http://w3.union-tel.com/~bmeyer/ His name... Isaiah 9:6 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 8 Feb 2002 01:35:02 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: Fluff: Around The World In 80 Minutes? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit i have no objection to my details being accessed by other list members .. i suggest that all members who have objections send in an email .. otherwise let's presume that there are no objections .. ..pk -----Original Message----- From: Daniel Hertrich To: HPLX-L@UConnVM.UConn.Edu Date: Friday, January 25, 2002 5:40 PM Subject: Re: Fluff: Around The World In 80 Minutes? >Hi PK > >On Fri, 25 Jan 2002 17:03:36 +0530, pksharma wrote: > >> >Is anyone keeping track of the responses to post a summary to the list? >> >> Exactly my thought too .. this thread reads >> like a who's who .. MUST be archived and >> put on super (?) as a zip file ... > >Extracting this thread from the list archive should be no big problem, >as long as we keep the subject. > >SUPER might be a problem. Actually all people who have posted and will >post their name and location (and whatever else) agree that these info >is publicly available on the web, since it is stored automatically and >is accessable from everywhere and everyone. But their could be law >issues anyway. Maybe someone should rather try how to extract and >process the data easily directly from Mike Kopplin's or Al's archives >and publish _that_info_. Would be also interesting to create an LXMap >from the data. So one can search for a specific person in LXMap and >LXMap takes you to the place where that person lives. :-) > >GTX >daniel > > >-- >http://www.daniel-hertrich.de/contact > >** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 01:25:36 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Re: HP200LX + NOKIA 6310 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Helmuth wrote: Recently I used a 6310 for testing... That sounds very interesting. I am very keen to activate the net monitor in the Nokia 6310. The only way I know to do that is with a dau-9p cable. But that doesn't work with the hplx anymore. It did work with a 6210 still. You didn't use that cable on the 6310? In Irda I only know the modem commands. What command do I need to reach the phone entries via Irda? Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 09:20:07 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: HP200LX + NOKIA 6310 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Uli > In Irda I only know the modem commands. What command > do I need to reach the phone entries via Irda? > Uli I use robot/lx with phone.scr, see www.dasoft.com. Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 09:44:10 +0100 Reply-To: Feher Tamas Sender: HPLX Mailing List From: Feher Tamas Subject: New Nokia mobile PCMCIA card D211. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit Hello all Nokia mobilephone card with GPRS, HSCSD, Wi-Fi and Wireless LAN in PCMCIA format. http://press.nokia.com/PR/200202/849290_5.html Linux will be supported, which means one could presumably write a 200LX/DOS driver; provided the Linux driver comes with open source as usual? For a picture click: http://www.terminal.hu/images/articles/4669393923.jpg Sincerely Yours: Tamas Feher. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 21 Feb 2002 06:10:52 -0800 Reply-To: bobv Sender: HPLX Mailing List From: bobv Subject: Re: dos bible software .... hisword MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Bob, Will he online bible files work on the HPLX with Hisword? Or do you have to run the OLB? I want to run the Geneva notes with Hisword. Is it possible? Thanks, Bob ---------------------- Online Bible must be 6.22. My setup includes a bunch of stuff including AV Lexicons Matthew Henry's notes Scofield's notes Wesley's notes Treasury of Scripture Knowledge HisWord is nice to take advantage of the larger screen fonts without having to pan. Starting point is v6.22. Make sure you have that first. You can do a simple install on a desktop to check or check -- BIBLE.EXE 62,562 05-29-96 8:54a. After that, I can give you any details you want to know. Bob ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 08:41:37 -0500 Reply-To: Steve Sender: HPLX Mailing List From: Steve Subject: Re: OT: FTP question Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Dr. Werner Furlan wrote: > thanks for your attention. > To process the directory of a ftp server, I wrote the following batch > file: > ftp -s:dir.txt > out.txt > The command works, but _IF_ the network connection is invoked by this > command (Dial up network) the output file stays locked by the OS and > cannot be processed later. (cannot be viewed by norton viewer for > example) > Happens in Win98SE, do not know if elswhere too. Sounds like a bug in 98SE. Anyway you can try two things. Try putting "EXIT" as the last command in the batch file. Try invoking the bath file as follows; COMMAND /CFTP.BAT The other trick you might use is that the "TYPE" command can sometimes access files that are open from other programs. TYPE out.txt > out2.txt If it works, you can use the out2.txt until Win lets loose of out.txt. HTH Steve ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 18:07:07 +0100 Reply-To: Klaus Reinhardt Sender: HPLX Mailing List From: Klaus Reinhardt Subject: 123-table-question MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" ----------------- mailto:K.Rdt@TU-Berlin.DE start ------------------- Hi I have a table of notes: 1 4 4 3 2 1 and want to generate a 'class-mirror' like that: 1 2 3 4 5 6 2 1 1 2 0 0 TiA K@Rdt ----------------- mailto:K.Rdt@TU-Berlin.DE !end! ------------------- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 18:39:00 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: 123-table-question MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I have solved somwhat similar problems like that: You make six new columns and fill them with: @wenn(a1=4,1,0) İsome idiots have not only germanized menu entries for spreadsheets but also all BASIC-like function names. This idiocy is part of all spreadsheets. Thus for what is INT in just about every programming language ever has to be typed as GANZZAHL. The LX's spreadsheet being in ROM there is nothing one can do about it, except use an English one without Umlauts¨ Then all you need is a @SUMME(h1..h25) for those six columns. Not very elegant and slows things down a lot (manual recompute will become a must) but the best I have been able to come up with. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 19:12:03 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: OT: Fwd: İOmniBook¨ File Request MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, sorry for another off topic - Maybe someone here knows. Can anyone help this guy? Thanks daniel --- begin of forwarded message --- From: "MOY, WILLIAM" To: "'OmniBook@zurich.ai.mit.edu'" Date: Thu, 21 Feb 2002 17:10:48 -0500 Subject: İOmniBook¨ File Request Hello All, I am stumped trying to find a program that is now abandonware, it is OBMax and it is a program to override the first Omnibook, the 300, limitations. Originally it was included with PCMCIA cards offered by the now defunct ACE Technologies. Very little information is available from my web searches. Where, O, where? in God's Green Earth can I get a copy o'this program!! I know this subject may be a little off-topic, but I'm reaching.... Anybody out there in Omnibookland that can help, please? -Bill _______________________________________________ OmniBook mailing list OmniBook@zurich.ai.mit.edu http://zurich.ai.mit.edu/mailman/listinfo/omnibook --- end of forwarded message --- -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 19:12:05 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Mindmaps MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, finally after this hard week full of tests I have a little bit of time again to reply to some messages. ;-) See following postings. During my preparation work for the tests I have used MM/LX mindmaps to learn the things I had to know. So, if anyone is intersted: I have two mindmaps. One regarding ISDN, one regarding "Rechnerssteme" (=computer systems). All in German, not complete, many things only described with keywords, not whole sentences. But maybe it is interesting to some people. I gladly send copies of them to anyone who's interested. The ISDN map gives an overiew of the possible services available in the ISDN network and some other interesting things. The Rechnersysteme map contains short descriptions of von-Neumann-architecture, RISC, CISC, pipelines, memory, cache mechanisms, virtual memory, multiprocessor systems, peripheral devices, hamming error protection, IRQ, DMA.... GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 19:12:08 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: HP200LX + NOKIA 6310 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Uli On Thu, 21 Feb 2002 11:50:21 -0500, Ulrich Allen wrote: > I am doing my first steps with the hp200lx and the > cell phone Nokia 6310. May I publish your experiences on my homepage? http://www.daniel-hertrich.de/mob_hplx Please report further success!! > As yet I couldn't get a contact to the phonebook > of the 6310 with the cable. That is certainly > because I don't know the right commands. Well, have a look into phone.scr and see what commands are used (or download AT command references to see what AT commands are used to access the phone book). Then try it manually. You can this way find out, if the script needs adaption or if maybe the phone firmware really has a bug. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 19:12:16 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: 123+wysiwyg? yes!! Fwd from Gottfried! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Tony On Wed, 20 Feb 2002 12:20:29 +1300, Tony Hutchins wrote: > I just tried this on the train here. Works like magic! > > Many thanks to Gottfried. Thanks!!! Also to Gottfried of course (are you listening?). I will try this procedure this weekend. I'll connect a mouse and load a mouse driver, to make this all complete. ;-) GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 19:12:17 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Nomouse driver on German palmtops? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, has anyone managed to make the nomouse driver work on a German palmtop? I have tried it several times in the past, but it simply doesn't respond to any keystroke. I assume it's because of the regional keyboard driver... GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 19:12:25 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Screen Repairing MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Stephen your message is a bit old, sorry, but in case you haven't got a reply yet... On Thu, 24 Jan 2002 23:50:25 +0800, Stephen Soper wrote: > I have a few HP-LX's, but only one is really usable. The screen on my 96MB > is really bad - lots of vertical lines, and only works if I bend it - and > there's a crack forming near the hinge. The 32MB never has worked very > well - right now I can't get it to recognize the large RAM disk. The 5MB > works OK, but it is small. I really got used to the 96MB, and would like to > fix the screen. Also, I would like to have the 32MB working properly. Does > anyone have any suggestions on how to change bodies or screens, or how to > get the 32Mb to work properly? I live in Taiwan, so sending it to the > States is not a very good option. Where's a good place to look for > information on taking a Palmtop apart? I can provide http://www.daniel-hertrich.de/repair and http://www.daniel-hertrich.de/repair/dismantle.shtml For the RAM disk you know that you need the Times2Tech driver? Can't oyu recognize it although you have the driver loaded? GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 19:12:26 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Databases for the Database Repository MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Scott, also here - sorry for the late response. On Thu, 28 Feb 2002 21:04:14 -0600, Scott Barrett wrote: > I have a few databases that I was going to upload, however, with the > work going on with super, I don't want to cause extra confusion. If it > is not a problem, I will upload them, but to who? The database repository is stored at www.thaddeus.com and I think Hal is the right person to contact here. But of course I can put the (also) on SUPER, if you wish. For that purpose, please post the databases to super@palmtop.net. I will get a copy (besides the other SUPER team members) and will put them online with the next SUPER update, which is planned for this weekend, maybe next week. Well - Hal, there are lots of databases already on SUPER, AND you have a lot on www.thaddeus.com. I would suggest that we put all the databases in one place, avoiding confusion and double entries. What do you think? GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 19:12:28 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Short battery life in an upgraded 200lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Russell On Fri, 1 Feb 2002 22:23:06 +0000, Russel Brooks wrote: > I thought when a factory 4M gets upgraded to 32M it loses its > extra 2M and ends up 32M+2M, the same a 2M unit would. I > thought I read that in one of Thadeus' catalogs but I can't find > that statement in their web catalog. > It's correct. On the motherboard there is never more than 2 MB. Everything else has to be placed on an extra socket and that socket can only hold ONE upgrade board. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 19:12:29 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: HP LX Program Requests : Possible SUPER Enhancement. MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Eric On Sat, 2 Feb 2002 01:06:43 -0500, Tralornik wrote: > I thought that it might be good to open this question to the forum: > ===> What program do you feel the HP200LX is missing that has not already > been written or is not available in a DOS format? > > I think it would be good to see if there is enough interest in certain > applications, then perhaps aspiring 200LX programmers may eventually write > them. Well, I would LOVE to have a program which allows me to track down all my diabetes data with a few keystrokes and analyze them in many ways (daily averages etc.). Similar to the Windows software "Camit", in case someone knows it ;-) I have been working on such a program, but unfortunately I didn't find the time to make it as I wanted to. As for now, only a converter program exists which lets me enter my data on the palmtop and later export it to Camit. http://www.daniel-hertrich.de/dmsim But of course it would be better to do all the data processing on the palmtop. And the best would be a glucose sensor which I can connect to the serial port of the palmtop (similar to Stephan Luettjohann's Palmtop Thermometer) which lets me measure directly with the LX. :-) But I think there is just too little interest in such things that it would be wirth the effort of programming and hardware research... GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 22 Feb 2002 20:43:39 +0100 Reply-To: Klaus Reinhardt Sender: HPLX Mailing List From: Klaus Reinhardt Subject: Re: 123-table-question In-Reply-To: <3C768234.A365EF41@NexGo.De> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" ----------------- mailto:K.Rdt@TU-Berlin.DE start ------------------- Hi Thank you for your quick answer; it is working.. >some idiots have not only germanized menu entries for spreadsheets but >also all BASIC-like function names. I felt so, too. (There seems not be a function like the INC in Pascal.) K@Rdt ----------------- mailto:K.Rdt@TU-Berlin.DE !end! ------------------- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 02:11:24 -0500 Reply-To: Tralornik Sender: HPLX Mailing List From: Tralornik Subject: Re: HP LX Program Requests : Possible SUPER Enhancement. Comments: To: Daniel Hertrich MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Daniel, Isn't that something that could be done (and perhaps found already created on the web) using Lotus 1-2-3 and some calculations? I think it is a great idea and a very good use of the palmtop to have a dedicated program, but I think you might be right about the small number of possible users for such a program...not too mention that most people probably wouldn't know the calculations unless they were going to be using it themselves. What did you think about the idea of having a forum for programming ideas on super? Judging by the very small number of responses I got from my post it looks like there aren't too many people looking for new programs (or people looking to create them). oh well.. Regards. ----- Original Message ----- From: "Daniel Hertrich" To: Sent: Friday, February 22, 2002 12:12 PM Subject: Re: HP LX Program Requests : Possible SUPER Enhancement. > Well, I would LOVE to have a program which allows me to track down all > my diabetes data with a few keystrokes and analyze them in many ways > (daily averages etc.). Similar to the Windows software "Camit", in case > someone knows it ;-) > > I have been working on such a program, but unfortunately I didn't find > the time to make it as I wanted to. > > As for now, only a converter program exists which lets me enter my data > on the palmtop and later export it to Camit. > http://www.daniel-hertrich.de/dmsim > > But of course it would be better to do all the data processing on the > palmtop. > And the best would be a glucose sensor which I can connect to the > serial port of the palmtop (similar to Stephan Luettjohann's Palmtop > Thermometer) which lets me measure directly with the LX. :-) > But I think there is just too little interest in such things that it > would be wirth the effort of programming and hardware research... > > GTX > daniel > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 12:41:40 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: 200 LX vs. Omnigo 700 LX MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit i would say that the 700 is a complete machine .. it has inbuilt fax program .. 200 doesn't it has inbuilt sms progrm .. 200 doesn't we need both these nowadays .. badly .. because emails are only downloaded when we do connect to the ISP .. a fax is received immediately .. you have to do nothing except keep it connected .. my dedicated fax machine (not the 700) has saved many a day for me .. i might have lost lots of business otherwise .. ..pk -----Original Message----- From: Oliver W. Leibenguth To: HPLX-L@UConnVM.UConn.Edu Date: Wednesday, January 30, 2002 12:43 AM Subject: 200 LX vs. Omnigo 700 LX >Hello, > >I just bought a 700 LX for my handheld-collection and now I'm asking myself >what the differences between a 200LX and a 700LX are(I don't mean the >obvious things like case, phone-cradle etc.)? >Does anybody know? > >regards, >Oliver > >** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 13:54:00 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: SUPER question Comments: To: Daniel Hertrich MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit A BIG BIG THANK YOU DANIEL .. FROM ALL OF US .. I AM STANDING UP AND GIVING YOU AN OVATION .. GUYS .. WANT TO JOIN UP AND MAKE THIS A STANDING OVATION .. GOD MAKES VERY FEW DANIELS (not shouting .. its important enough to be said in caps!) ..pk (sorry for getting you in the mess.. you deserve a treat .. will do that .. when you come to india .. note that its not IF you come to india but WHEN .. ) :-))) -----Original Message----- From: Daniel Hertrich To: HPLX-L@UConnVM.UConn.Edu Date: Friday, February 08, 2002 3:31 PM Subject: Re: SUPER question >Hi Eric and list > >> Anything left for us forum helpers to do for SUPER? > >Actually not. > >The main work is finished, although I have still some todo items from >emails from you all. > >Thanks for your cooperation! It is really a pleasure to >work with you all. I have never seen any other forum or newsgroup which >is such a nice place to talk AND is able to establish such effective >and commited cooperation. > >Thanks of course also to the whole S.U.P.E.R. team for setting this >page up, hosting the files, paying the ISDN connection fees, paying >the domain fee, writing so powerful perl scripts.... :-) > >I have many other things to do currently - five examiniations very >soon, so I have not too much time to work on SUPER these days. > >But I will continue to do the job, if you all agree, as updates come in >quite rarely, it is not so much work. It was only very time consuming >to clean up the whole thing and update to new software versions where >it was possible. > >So, software updates and hints for new software are always welcome, and >I will process them as soon as I have the time. > >I will soon put a complete changelog onto >www.palmtop.net/whatsnew.html. But this is a C-priority. > >GTX >daniel > >P.S.: BTW: Did I post the most recent changelog already? > > >04-FEB-02 >LXMAP updated to 3.0 >Juergen Korthof's Voltchck v1.1 added > > >07-FEB-02 >updated postpdu from v1.25 to v1.27 >updated Pavel Zampach's CSV2GP to v1.1 >added Leo Bellantoni's dweebpak.zip > >-- >http://www.daniel-hertrich.de/contact > >** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 07:30:41 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Re: HP200LX + NOKIA 6310 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Sure, Daniel, and I still try to get some more information on the NOKIA 6310. Sofar I haven't managed to activate the hidden net monitor of the 6310. Which is a drawback to me. With the hints of the list (and your great homepage) I got the robot phone exchange to work. SMS from the palm doesn't work yet. But that is certainly a matter of time only. I haven't tried GPRS and Bluetooth yet. I'll keep you informed. Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 16:20:03 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: 200 LX vs. Omnigo 700 LX MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > it has inbuilt fax program .. 200 doesn't > it has inbuilt sms progrm .. 200 doesn't But the 200 does have a PCMCIA slot able to take the same Nokia card the 700 has mounted internally. So has anyone ever found a way to make these programs availabe - can they be read from ROM? The SMS software would be nice for my notebook too. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 19:09:26 +0000 Reply-To: Gottfried Burckhardt Sender: HPLX Mailing List From: Gottfried Burckhardt Subject: Re: 123+wysiwyg? yes!! Fwd from Gottfried! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Daniel, >>Also to Gottfried of course (are you listening?).<< yes, of course. Good luck with the mouse, it worked for me with a touch pad. BTW the background colors and so on can be changed in WYSIWYG (<5>) and to start a file automaticaly when launching 123 you just have to name that spread sheet "auto123.wk1" (at least that worked for me) Bye for now Gottfried (the German Indian from Wild South-West ) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 14:03:58 -0500 Reply-To: David Heath Sender: HPLX Mailing List From: David Heath Subject: Re: ONLINE BIBLE FOR DOS V6.0 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit ----- Original Message ----- From: To: Sent: Saturday, February 23, 2002 11:46 AM Subject: Re: ONLINE BIBLE FOR DOS V6.0 > Dear Downeast; > Did you find a copy of HisWord yet? > LXJim@aol.com > Yes, I was able to download HisWord from http://www.hisword.net/tom/hisword.html. I am still in the process of setting it up. I would like to have the OLB-NIV version but I don't know where to get it. Does anybody know the location to download? Also, what is the cost to get the authorization code for the NIV version? Where do you go to make payment? Dave ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 20:24:51 +0100 Reply-To: Klaus Reinhardt Sender: HPLX Mailing List From: Klaus Reinhardt Subject: Re: 123-table-question Comments: To: Axel.Berger@NexGo.De In-Reply-To: <3C768234.A365EF41@NexGo.De> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" ----------------- mailto:K.Rdt@TU-Berlin.DE start ------------------- Hi Playing around with the data (Daten) options I found another (better?) way to generate a 'class-mirror'. data / distribution (Verteilung) You have to mark the pupils-notes-range and in the second step the notes-range in a separate column; then the distribution is displayed beneath(!) in the right column. 1.) 5 2.) 4 3.) 1 4.) 1 1 2 2 0 3 0 4 1 5 1 6 0 You can hide the left column; the only disadvantage is; F9 doesn't do the job, you have to select / .. (s.o.) K@Rdt ----------------- mailto:K.Rdt@TU-Berlin.DE !end! ------------------- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 15:34:52 -0500 Reply-To: Martin Bergvill Sender: HPLX Mailing List From: Martin Bergvill Subject: Re: HP LX Program Requests : Possible SUPER Enhancement. MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit On Fri, 22 Feb 2002 19:12:29 +0200, Daniel Hertrich wrote: > Hi Eric > > On Sat, 2 Feb 2002 01:06:43 -0500, Tralornik wrote: > > > I thought that it might be good to open this question to the forum: > > ===> What program do you feel the HP200LX is missing that has not already > > been written or is not available in a DOS format? > > > > I think it would be good to see if there is enough interest in certain > > applications, then perhaps aspiring 200LX programmers may eventually write > > them. I use MPG to track how much fuel I use on my bike and car. I would like to be able to see when I last filled the tank. I would like to do this by choosing that in the menu. Now I have to edit the cfg to see this. I will try to send a email to Owen Samuelson and ask if he can add a menu option to do this. If the source is free maybe I could get somebody here to look into. TIA -- Martin Bergvill ,Narvik Norway ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 21:24:32 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: 123-table-question MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > you have to select / .. (s.o.) Well, that's what scripts/makros/batches are for. Does the LX ROM Version support them? Haven't tried yet. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 20:02:43 -0500 Reply-To: Eduardo Seudsnimo Sender: HPLX Mailing List From: Eduardo Seudsnimo Subject: Re: Fwd: İOmniBook¨ File Request In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I'm looking for this application also. Unlike the 200lx the OB300 loads = some device drivers in order to support instant on/off. There are other = things loaded resulting in only 400KB free under DOS. There is no way to = get rid of the drivers without OBMAX. Another possibility is a program = that can terminate TSRs. Does one exist? > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On Behalf Of > Daniel Hertrich > Sent: Friday, February 22, 2002 12:12 PM > To: HPLX-L@uconnvm.uconn.edu > Subject: OT: Fwd: İOmniBook¨ File Request >=20 >=20 > Hi friends, >=20 > sorry for another off topic - Maybe someone here knows. > Can anyone help this guy? >=20 > Thanks > daniel >=20 > --- begin of forwarded message --- >=20 > From: "MOY, WILLIAM" > To: "'OmniBook@zurich.ai.mit.edu'" > Date: Thu, 21 Feb 2002 17:10:48 -0500 > Subject: İOmniBook¨ File Request >=20 > Hello All, >=20 > I am stumped trying to find a program that is now abandonware, it is = OBMax > and it is a program to override the first Omnibook, the 300, = limitations. > Originally it was included with PCMCIA cards offered by the now=20 > defunct ACE > Technologies. Very little information is available from my web = searches. > Where, O, where? in God's Green Earth can I get a copy o'this = program!! I > know this subject may be a little off-topic, but I'm reaching....=20 > Anybody > out there in Omnibookland that can help, please? -Bill >=20 > _______________________________________________ > OmniBook mailing list > OmniBook@zurich.ai.mit.edu > http://zurich.ai.mit.edu/mailman/listinfo/omnibook >=20 > --- end of forwarded message --- >=20 > -- > http://www.daniel-hertrich.de/contact >=20 > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml >=20 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 19:45:22 -0600 Reply-To: Chris Lott Sender: HPLX Mailing List From: Chris Lott Subject: Re: ONLINE BIBLE FOR DOS V6.0 Comments: To: downeast@VOL.COM In-Reply-To: <002b01c1bc9c$ea2ca900$b0af0ad8@dheath> from "David Heath" at Feb 23, 2002 02:03:58 PM MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > Yes, I was able to download HisWord from > http://www.hisword.net/tom/hisword.html. I am still in the process of > setting it up. I would like to have the OLB-NIV version but I don't know > where to get it. Does anybody know the location to download? Also, what is > the cost to get the authorization code for the NIV version? Where do you go > to make payment? Dave: I just dug through my old e-mails, and I purchased mine from a fellow named Phil Linder at Online Publishing (also corresponded with Sharon there as well). I bought the NIV, NAS, and NRS versions. Their mail address is: Online Publishing PO Box 21 Bronson MI 49028 I just also found their webpage: http://www.biblecd.com/ These folks were helpful. They exchanged a damaged disk for me, and also swapped me when I first accidentally ordered the Windows versions. Mr. Linder also helped me with the installation process, which, as noted, is amazingly cumbersome... -Chris Lott -- ************************************************************************ R. Christopher Lott, P.E. rclott@ro.com Alpha Beta Technologies, Inc. 3112 12th Ave S.W. PHONE: 256-534-9067 Huntsville, Alabama 35805 FAX: 256-534-9069 ************************************************************************ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 14:53:34 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: 123+wysiwyg? yes!! Fwd from Gottfried! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sun, 24 Feb 2002 14:24:24 +1300 (NZDT) 1 day 08h12m08s ago ... On Fri, 22 Feb 2002 19:12:16 +0200, Daniel Hertrich wrote: > I will try this procedure this weekend. > I'll connect a mouse and load a mouse driver, to make this all > complete. ;-) Hi Daniel - all the best for top marks in your exams! I just found that alt-F7 activates the smarticon bar that appears down the right hand side of the wysiwyg 123 screen. So, even if the mouse doesn't work, the keyboard is still an option for activating those icons. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 04:01:28 +0100 Reply-To: gonter+usenet@wu-wien.ac.at Sender: HPLX Mailing List From: Gerhard Gonter Subject: Re: 200LX Database Format Question. MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Tralornik wrote: > > Does anyone know what the Record Header Status of "03" means? > > I know that: > > 00= Normal > 01= Garbage > 02= Modified > > but I cannot find any documentation on what 03 is supposed to be and I seem > to find it only in some of my VIEWPTTABLE records. (I have several that are > status 03 and one that is status 02 (modified). Maybe this field is really a bit field, then it would be "Modified Garbage". > Any info on what 03 means (and also what exactly GARBAGE means for that > matter !) would be greatly appreciated. I guess this could be a deleted record. +gg ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 14:36:21 -0800 Reply-To: LLoo@WORLDNET.ATT.NET Sender: HPLX Mailing List From: Longden Loo Subject: Re: Fwd: İOmniBook¨ File Request In-Reply-To: MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT There used to be a PC Magazine freeware program(s) called Mark and Release which allowed you to peel away TSRs (at your own risk). You might dig around the shareware/freeware sites, or PC Mag's download area. - Longden On 23 Feb 2002, at 20:02, Eduardo Seudsnimo wrote: > I'm looking for this application also. Unlike the 200lx the OB300 > loads some device drivers in order to support instant on/off. There > are other things loaded resulting in only 400KB free under DOS. There > is no way to get rid of the drivers without OBMAX. Another possibility > is a program that can terminate TSRs. Does one exist? > > > I am stumped trying to find a program that is now abandonware, it is > > OBMax and it is a program to override the first Omnibook, the 300, > > limitations. Originally it was included with PCMCIA cards offered by > > the now defunct ACE Technologies. Very little information is > > available from my web searches. Where, O, where? in God's Green > > Earth can I get a copy o'this program!! I know this subject may be ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sat, 23 Feb 2002 22:50:01 -0600 Reply-To: tpkelley@HOUSTON.RR.COM Sender: HPLX Mailing List From: Tim Kelley Subject: Re: Orinoco wireless lan? Comments: To: Daniel Hertrich , Daniel Hertrich MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > Another issue is this: > > The ZoomAir, and at least the early Orinoco cards are 5V cards, which > generaly work in the LX. > But I think most newer wLAN cards (at least my new Compaq WL100 card) > are 3.3V cards, which are not only electrically, but also mechanically > different from 5V and 12V cards. This is to prevent the user from > putting a 3.3V card into a slot which only provides 5V and 12C (as our > HPLX does). It is something like a little hardware "key". > > GTX > daniel I was wondering if anyone has found out anything more on whether we can run wireless lan card in our LX's safely. I have Cisci and Dell cards as well as a linksys access point at home. Thanks. Tim ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 06:32:29 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: updates of my masterpieces :) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit I have corrected the date stamp bug in MYMONEY.WK1 (which is an alternative to QUICKEN), and i have added more numbers to AREACODE.GDB It will be on SUPER as soon as Daniel does his updates Nathalie ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 01:20:52 -0800 Reply-To: j_vanderstel@JUNO.COM Sender: HPLX Mailing List From: John J Vander Stel Subject: Re: SUPER question MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit >A BIG BIG THANK YOU DANIEL .. FROM ALL OF US .. >I AM STANDING UP AND GIVING YOU AN OVATION .. >GUYS .. WANT TO JOIN UP AND MAKE THIS A >STANDING OVATION .. GOD MAKES VERY FEW >DANIELS I will second the above! Thank you, Daniel. I was unavailable to help in checking the links, so I'm also very greatful to those who stepped in and helped Daniel so much. SO... A BIG THANK YOU TO DANIEL AND EVERYONE ELSE WHO MADE IT POSSIBLE FOR DANIEL TO ACCOMPLISH SUCH A FEAT! Cheers! John Vander Stel Grand Rapids, Michigan ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 06:33:20 -0500 Reply-To: Martin Bergvill Sender: HPLX Mailing List From: Martin Bergvill Subject: Re: HP200LX + NOKIA 6310 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit On Fri, 22 Feb 2002 01:25:36 -0500, Ulrich Allen wrote: > Helmuth wrote: > Recently I used a 6310 for testing... > > That sounds very interesting. > I am very keen to activate the net monitor in the > Nokia 6310. The only way I know to do that is with > a dau-9p cable. I am quite sure you can do the same with the DLR3P cable. > But that doesn't work with the > hplx anymore. It did work with a 6210 still. So you used the Hplx to activate Netmonitor? Well if you download from http://www.logomanager.co.uk you can use thet program to enable Netmonitor. But it will only run on a Win machine. Regards -- Martin Bergvill ,Narvik Norway ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 06:51:12 -0500 Reply-To: ronburnett@COMPUSERVE.COM Sender: HPLX Mailing List From: Ron Burnett Subject: 200LX - largest CF without driver? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable What's the largest CF that can be used in an HP-200LX without a driver? Ron ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 09:39:10 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Fwd: İOmniBook¨ File Request MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Longden Loo wrote: > There used to be a PC Magazine freeware program(s) called Mark > and Release which allowed you to peel away TSRs (at your own > risk). You might dig around the shareware/freeware sites, or PC > Mag's download area. Release can only terminate TSRs and Drivers that load after Mark loads. Also I think it was Dos 5 where they quit working. Maybe it was Dos 6 but I don't think so. Anyway, whichever Dos it was, they only work with Dos's before that. There is another freeware program called Flush that does work in Dos 5 and works ok on the 200lx IIRC. I haven't used it for years so it might have just been on the 95lx but I don't think so. It's a single program that works like both Mark and Release. But it still has to run before the things you want to remove have been loaded. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 11:29:14 -0600 Reply-To: Curtis Cameron Sender: HPLX Mailing List From: Curtis Cameron Organization: None Subject: Re: GARLIC & Appointment Database? Comments: To: rob@rclewis.com In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit On Fri, 15 Feb 2002 17:18:22 -0600 robert c lewiswrote: >It looks like I am going to have to hand transfer every record out of it >into a new database, since both use of GARLIC and the other suggestion, >merging it with an empty database have not worked. If there are any >other suggestions I'm open to trying them. Thanks. I have been able to repair most of the corrupted files that people have sent me. If you'd like me to take a stab at it, send it to me. -- Curtis Cameron ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 10:31:29 -0800 Reply-To: Alfred1520 Sender: HPLX Mailing List From: Alfred1520 Subject: Re: SUPER question MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sorry to quote full message but I totally agree. Thanks. Best Regards, Alfred -----Original Message----- From: John J Vander Stel To: HPLX-L@UConnVM.UConn.Edu Date: Saturday, February 23, 2002 10:23 PM Subject: Re: SUPER question >>A BIG BIG THANK YOU DANIEL .. FROM ALL OF US .. >>I AM STANDING UP AND GIVING YOU AN OVATION .. >>GUYS .. WANT TO JOIN UP AND MAKE THIS A >>STANDING OVATION .. GOD MAKES VERY FEW >>DANIELS > >I will second the above! Thank you, Daniel. I was unavailable to help >in checking the links, so I'm also very greatful to those who stepped in >and helped Daniel so much. > >SO... A BIG THANK YOU TO DANIEL AND EVERYONE ELSE WHO MADE IT POSSIBLE >FOR DANIEL TO ACCOMPLISH SUCH A FEAT! > >Cheers! > >John Vander Stel >Grand Rapids, Michigan >________________________________________________________________ >GET INTERNET ACCESS FROM JUNO! >Juno offers FREE or PREMIUM Internet access for less! >Join Juno today! For your FREE software, visit: >http://dl.www.juno.com/get/web/. > >** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 18:08:04 +0100 Reply-To: Norbert_Giese@T-Online.de Sender: HPLX Mailing List From: Norbert Giese Subject: Question regarding clipboard and Fn-Copy in 1-2-3 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, I like to ask for the group's support with a little problem. I am working on a little project where an LX-Batch program acts as a broker that picks up a task, prepares customized keystrokes, quits then, and lets the keystrokes go off to invoke a target application. After completion of a task, the last keystrokes reinvoke the broker to do the next task. I am using the clipboard to Fn-Paste the variable data in a target application, and to Fn-Copy return information from it for use by the broker. Here my problem starts. I started with 1-2-3 as target appl. and got the concept working. When a 1-2-3 macro did a job, it places a return code in a specified cell. But I cannot get the Fn-Copy keystroke to copy the cell content to the clipboard. With a single cell selected, I get a message similar to "Copy not possible. Marked range too large.", even it is only a single cell. It fails even if the buffered keystrokes stop before and I do the Fn-Copy manually. The problem seems related to what happens before 1-2-3 is invoked, because Fn-Copy generally works OK in 1-2-3. I see that the LX-Batch program has properly finished and the DOS box is closed. The only difference is that the keystrokes in the keyboard buffer are not manually typed but prepared by the LX-Batch program. Interesting, if I am in the 1-2-3 sheet where Fn-Copy does not work, I can switch to another LX application, for example Memo, do a Fn-Copy, go back to 1-2-3, and then Fn-Copy works OK. Any idea what causes this behaviour? All hints and tips are very welcome. Thanks for taking the time. Norbert -- Norbert Giese, A.Stifter-Weg 10, 71116 Gaertringen ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 21:28:25 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: some 95 LX adapters still there MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit For those having a 100/200LX cable, and a 95LX or a 48GX/SX or so with NO cable and no adapter, I still have some 5 of those short plug on (10 pins male to 4pin female) adapters available, free shipping worldwide . Cost: 1 picture postcard. Michel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 21:45:32 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: 95 LX English German Translator MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I have got those two PCMCIA ROMs, each 2 MB, one English to German the other reverse, together with a used 200 LX. According to the handbook they were sold for the 95 LX. To start they ask for a "Menu" keypress which seems to be encoded differently between the machines and the thing does not work. (Neither do they on my notebook, which can't read the cards anyway, but copying Card -> 200 LX -> notebook was possible.) As they are no good for me I offer them here. No idea what to ask for them, make me an offer, the more irresistable the better. I'll pack an adaptor 95 LX notepad to 200 LX serial cable with it, as I do not have any use for it and it would only get lost sooner rather than later. Axel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 16:46:23 -0500 Reply-To: harris.upstate@verizon.net Sender: HPLX Mailing List From: Harris Paltrowitz Subject: Connect to WinME? In-Reply-To: <3C7950EC.3C5C6388@NexGo.De> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi all, I'm an old 200LX user from years ago, but I went astray over the past few years, trying out the Newtons, Palms, WinCE version 2 and 3 (Pocket PC) but now that I'm in the need of a good portable keyboard solution, I'm thinking of coming back... boy, did I love my 200LX years ago, and even though I'm a big fan of the Palm OS (it'll do a lot more than a lot of people realize) there's no substitute for having a ubiquitous keyboard around. One question: I tried to sync to Transfile Win200 LX today for the first time under Windows ME, and it just would not work. Are there known issues here? I did see something in the January post archive, but searching for these terms on palmtop.net yielded nothing specific. I even tried using a serial plug adapter that Palm had sent me which helped me connect an old Palm serial device to ME, but this didn't help. I used to use and love Transfile, so I'd love to be able to use it again. Would appreciate any and all assistance!! Thanks. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 19:07:06 -0500 Reply-To: Eduardo Seudonimo Sender: HPLX Mailing List From: Eduardo Seudonimo Subject: DANIEL ROCKS (WAS: RE: SUPER question In-Reply-To: <20020224.012105.-187135.0.j_vanderstel@juno.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable WE FILL A STADIUM AND HOIST OUR LIGHTERS LIT AND ALOFT AS WE CHEER = "DANIEL! DANIAL! DANIEL!" YOU DA MAN! > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On Behalf Of > John J Vander Stel > Sent: Sunday, February 24, 2002 4:21 AM > To: HPLX-L@uconnvm.uconn.edu > Subject: Re: SUPER question >=20 >=20 > >A BIG BIG THANK YOU DANIEL .. FROM ALL OF US .. > >I AM STANDING UP AND GIVING YOU AN OVATION .. > >GUYS .. WANT TO JOIN UP AND MAKE THIS A > >STANDING OVATION .. GOD MAKES VERY FEW > >DANIELS >=20 > I will second the above! Thank you, Daniel. I was unavailable to = help > in checking the links, so I'm also very greatful to those who stepped = in > and helped Daniel so much. >=20 > SO... A BIG THANK YOU TO DANIEL AND EVERYONE ELSE WHO MADE IT POSSIBLE > FOR DANIEL TO ACCOMPLISH SUCH A FEAT! >=20 > Cheers! >=20 > John Vander Stel > Grand Rapids, Michigan > ________________________________________________________________ > GET INTERNET ACCESS FROM JUNO! > Juno offers FREE or PREMIUM Internet access for less! > Join Juno today! For your FREE software, visit: > http://dl.www.juno.com/get/web/. >=20 > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml >=20 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 19:07:05 -0500 Reply-To: Eduardo Seudonimo Sender: HPLX Mailing List From: Eduardo Seudonimo Subject: Re: Fwd: İOmniBook¨ File Request In-Reply-To: <3C77A8E5.4195.F3F7A68@localhost> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Yep, I remember those. The work a lot like maxdos in that they have to = run BEFORE you load any TSRs. You run mark as the first TSR and then = realease can close all TSRs after that. I think you could even run = multple instances and peel away the TSRs in layers.=20 I don't think it'll help with the OB300 tho cause you gotta get that = mark program in there first to close subsequent TSRs. You need something = that'll wedge itself in there above the default OB TSRs. > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On Behalf Of > Longden Loo > Sent: Saturday, February 23, 2002 5:36 PM > To: HPLX-L@uconnvm.uconn.edu > Subject: Re: Fwd: İOmniBook¨ File Request >=20 >=20 > There used to be a PC Magazine freeware program(s) called Mark > and Release which allowed you to peel away TSRs (at your own > risk). You might dig around the shareware/freeware sites, or PC > Mag's download area. >=20 > - Longden >=20 > On 23 Feb 2002, at 20:02, Eduardo Seudsnimo wrote: >=20 > > I'm looking for this application also. Unlike the 200lx the OB300 > > loads some device drivers in order to support instant on/off. There > > are other things loaded resulting in only 400KB free under DOS. = There > > is no way to get rid of the drivers without OBMAX. Another = possibility > > is a program that can terminate TSRs. Does one exist? > > >=20 > > > I am stumped trying to find a program that is now abandonware, it = is > > > OBMax and it is a program to override the first Omnibook, the 300, > > > limitations. Originally it was included with PCMCIA cards offered = by > > > the now defunct ACE Technologies. Very little information is > > > available from my web searches. Where, O, where? in God's Green > > > Earth can I get a copy o'this program!! I know this subject may = be >=20 > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml >=20 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 19:47:52 -0500 Reply-To: Martin Bergvill Sender: HPLX Mailing List From: Martin Bergvill Subject: OT:Bed & Breakfast in =?ISO-8859-1?Q?L=FCbeck?= MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi I will in the beginning of august drive from Gislaved in Sweden to Adenau in Germany. A couple of friends and me will drive down to Adenau and drive on N|rnberg Ring with our bikes. We will drive from Gislaved in Sweden in the afternoon and down to L|beck. We will probably be in L|beck at approx 2330 at night. My question to the list is if somebody knows a cheap Bed & Breakfast there we could stay at? We will be in L|beck on friday 02.august. TIA -- Martin Bergvill ,Narvik Norway ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 05:48:28 +0100 Reply-To: Nathalie Bugeaud Sender: HPLX Mailing List From: Nathalie Bugeaud Subject: Windoze XP MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit While at Poitiers Hospital i met my Ophtamologist friend trying to show off his new $3000 Compaq Presario with CD writer. Windoze XP got completely stuck 3 times giving him no choice but having to remove the battery pack! When we tried my PCMCIA Sundisk Flash it wouldn't even recognise it -... makes me appreciate my trusted LX even more! :) ... Nathalie ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 23:01:15 -0700 Reply-To: Richard and Patti Smith Sender: HPLX Mailing List From: Richard and Patti Smith Organization: Orion On-Site Computer Services Subject: Re: Fwd: İOmniBook¨ File Request MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I still have Mark and Release (although no documentation for them), and would be willing to send them to any who so desire. I haven't tested them with the Palmtop, or with any recent version of DOS, but, I think they do work with DOS 5, IIRC. Richard A. Smith -- "Now is the time for all good people to come to the aid of their country" ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 23:04:18 -0700 Reply-To: Richard and Patti Smith Sender: HPLX Mailing List From: Richard and Patti Smith Organization: Orion On-Site Computer Services Subject: DANIEL ROCKS (WAS: RE: SUPER question MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Agreed! Thanks, Daniel! Richard A. Smith ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Sun, 24 Feb 2002 22:37:09 -0800 Reply-To: xy mox Sender: HPLX Mailing List From: xy mox Subject: Re: 200LX - largest CF without driver? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Hi Ron, I'm using Kingston 256MB CF, it no need any driver and formatted. http://www.kingston.com/flash/compfl.asp#spec it around US$ 100 Power Consumption: Sleep/Standby Current 100 uA (typical) Read/Write Current 45 mA (typical) 75 mA (max.) A:\>chkdsk Volume TOSHIBA256M created 06-07-1999 10:34a Volume Serial Number is 2001-0116 255827968 bytes total disk space 749568 bytes in 181 directories 67842048 bytes in 2317 user files 187236352 bytes available on disk 4096 bytes in each allocation unit 62458 total allocation units on disk 45712 available allocation units on disk 651264 total bytes memory 596960 bytes free say bye bye Jam disk! :-) Billy >What's the largest CF that can be used in an HP-200LX without a driver? > >Ron ------------------------------ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 07:57:12 +0100 Reply-To: Yves Leurquin Sender: HPLX Mailing List From: Yves Leurquin Subject: Re: 123-table-question MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable > ever has to be typed as GANZZAHL. The LX's spreadsheet being in ROM = there > is nothing one can do about it, except use an English one without = Umlauts¨ You can also install a full 123 ver 2.4 from disks and no longer use the = ROM version. \/ /ves (who also has to struggle with a German MS Excel at work) _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 13:52:38 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit >I have one of the Trans Digital parallel port PC cards that Thaddeus sells >and it work wonderfully with a 100 Zip drive. Is this correct ? then the parallel port is bi-directional ! Its a thing i've been looking for a long long time .. i have a device which connects thru the parallel port .. and has to be externally powered .. it allows any laptop to read from & write to another harddisk .. it has a dos driver .. and works thru a parallel port .. i think that every printer sends back an ack signal so that the computer doesn't keep dumping data which the printer cannot handle .. but that's not pure bi-directional .. yet a zip drive must have the bi-directional feature .. otherwise it would be able to send the data back to the palmtop .. if the zip drive works .. this TransDigital Parallel port is the right thing .. >Or, if you (Nathalie) want to pay just the postage, I'll give you a >USRobotics 24/96 Worldport pocket modem that is brand new and comes with the >European 220 volt ac adapter. Email isn't TOO bad at 2400 baud. (Probably >could pick up something similar in France for less than the postage from the >US though.) nathalie ? yours is the 1st option, mine is the second , i'm looking for a pocket modem (low speed is ok) for a long time .. the pocket modem type .. if you are not picking it up .. i may pick it up .. is it ok with you bob ? ..pk ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 09:41:26 +0100 Reply-To: radek.svagr@LGPHILIPS-DISPLAYS.COM Sender: HPLX Mailing List From: Radek Svagr Subject: Re: Windoze XP MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Some older burning programs wil not work under these windoze... I installed them also, after solwing problems with older software which refused to work (fortunately TFWIN2000 works fine). I can say it is more stable (on my desktop) than W95 OSR2. However Linux is Linux:-) With a sundisk flash - I' ve red somewhere that "newer" windoze may need drivers to be installed. One my colegue has pcmcia drivers on his computer with W2000, I haven't.... Radek Nathalie Bugeaud cc: (bcc: Radek Svagr/HRC/COMP/PHILIPS) Sent by: HPLX Subject: Windoze XP Mailing List 2002-02-25 05:48 AM Please respond to Nathalie Bugeaud While at Poitiers Hospital i met my Ophtamologist friend trying to show off his new $3000 Compaq Presario with CD writer. Windoze XP got completely stuck 3 times giving him no choice but having to remove the battery pack! When we tried my PCMCIA Sundisk Flash it wouldn't even recognise it -... makes me appreciate my trusted LX even more! :) ... Nathalie ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 10:44:50 +0100 Reply-To: Ulrich Boche Sender: HPLX Mailing List From: Ulrich Boche Subject: Re: Connect to WinME? Comments: To: harris.upstate@verizon.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="=_alternative 0035669BC1256B6B_=" This is a multipart message in MIME format. --=_alternative 0035669BC1256B6B_= Content-Type: text/plain; charset="us-ascii" On Sunday, 24.02.2002 at 16:46 EST, Harris Paltrowitz wrote: > Hi all, > > I'm an old 200LX user from years ago, but I went astray over > the past few > years, trying out the Newtons, Palms, WinCE version 2 and 3 > (Pocket PC) but > now that I'm in the need of a good portable keyboard > solution, I'm thinking > of coming back... boy, did I love my 200LX years ago, and > even though I'm a > big fan of the Palm OS (it'll do a lot more than a lot of > people realize) > there's no substitute for having a ubiquitous keyboard around. > > One question: I tried to sync to Transfile Win200 LX today > for the first > time under Windows ME, and it just would not work. Are there > known issues > here? I did see something in the January post archive, but > searching for > these terms on palmtop.net yielded nothing specific. > > I even tried using a serial plug adapter that Palm had sent > me which helped > me connect an old Palm serial device to ME, but this didn't > help. > > I used to use and love Transfile, so I'd love to be able to > use it again. > > Would appreciate any and all assistance!! > I've never user Transfile (too slow) but Eric Meyer's zip.com is working quite nicely under Windows Me. Ulrich Boche --=_alternative 0035669BC1256B6B_= Content-Type: text/html; charset="us-ascii"
On Sunday, 24.02.2002 at 16:46 EST, Harris Paltrowitz <harris.upstate@verizon.net> wrote:
> Hi all,
>
> I'm an old 200LX user from years ago, but I went astray over
> the past few
> years, trying out the Newtons, Palms, WinCE version 2 and 3
> (Pocket PC) but
> now that I'm in the need of a good portable keyboard
> solution, I'm thinking
> of coming back...  boy, did I love my 200LX years ago, and
> even though I'm a
> big fan of the Palm OS (it'll do a lot more than a lot of
> people realize)
> there's no substitute for having a ubiquitous keyboard around.
>
> One question:  I tried to sync to Transfile Win200 LX today
> for the first
> time under Windows ME, and it just would not work.  Are there
> known issues
> here?  I did see something in the January post archive, but
> searching for
> these terms on palmtop.net yielded nothing specific.
>
> I even tried using a serial plug adapter that Palm had sent
> me which helped
> me connect an old Palm serial device to ME, but this didn't
> help.
>
> I used to use and love Transfile, so I'd love to be able to
> use it again.
>
> Would appreciate any and all assistance!!
>
I've never user Transfile (too slow) but Eric Meyer's zip.com is working
quite nicely under Windows Me.

Ulrich Boche
 --=_alternative 0035669BC1256B6B_=-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 07:12:05 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Re: HP200LX + NOKIA 6310 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Martin wrote: > I am quite sure you can do the same with the DLR3P cable You are right, Martin. It works fine with the DLR-3P and the HPLX. Sure you can activate the netmonitor with the logomanager and a another netmonitor on Www.nobbi.com. But we like to do it with the hplx, don't we? Unfortunately all the programms do not work to activate the netmonitor in the 6310 or even work with 6310. I am in contact with one of the authors to get an external netmonitor working again with the 6310. As yet the new code to activate the internal 6310 net- monitor isn't known. Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 06:31:28 -0600 Reply-To: Orin Keplinger Sender: HPLX Mailing List From: Orin Keplinger Subject: =?iso-8859-1?Q?Re:______OT:Bed_&_Breakfast_in_L=FCbeck?= Comments: To: Martin Bergvill MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Martin: Have you considered the International Hostelling Federation locations? There are some good websites and one of them, if I understand you to mean Lubeck, Germany, that might be of interest to you is: http://www.djh.de/international/02_jh/JHData_e.asp?ID_JH=536 The hostels tend to take reservations and cater to younger travelers first, but many have very inexpensive rates and often offer some type of breakfast as well as a cooking area for those who wish to cook their own food. Many are also computer friendly. The price difference between a hostel and other accommodations tends to even out such that when there are several travelers together, a B&B may not be that much more expensive and will usually be more private/quiet, etc. As Ever, Orin Keplinger near Chicago E)orink@ix.netcom.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 15:08:02 -0000 Reply-To: "Richard E. McEvoy" Sender: HPLX Mailing List From: "Richard E. McEvoy" Subject: Re: Windoze XP Comments: cc: Nathalie Bugeaud MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I got a Dell Domension 8200 2ghz (with everything) last December. The HP psc950 CD will not transfer photos to it. Also the software and helpfiles on the HP CD cannot be used. HP say they are working on it. The USB flash reader cannot be used (" iKernel.exe could not be copied to C:\program files....") In January, PowerQuest's Partition Magic crashed the system so that it seemed NOTHING but the A drive was usable. I downloaded their diagnostic tool, Partinfo, on another computer. Using it in the A drive, I got a "no run file for this extension" Changing the extension to .exe ran it and the problem was diagnosed by Powerquest as the Blue Screen error associated with the Turtle Beach Sound Card. I downloaded a new 24.9mb Turtle Beach driver on another computer but it could not be used because the Dell could not be booted until I found out that the installation CD worked in the DVD drive once it was prioritised in the BIOS. It then was possible to reinstall XP as a parallel installation. The new driver uninstalled the card, but the reinstallation halted when 40% completed and froze the computer which had to be switched off at the mains. The sound is there, but I dare not try partitioning the drive again. PowerQuest have not advised me on a course of action. I have had no reply to my e-mails of February 10 and 15. Maybe they don't know what to do, or maybe they are thinking about it! Even if these problems are resolved, I don't like the parallel installation with the old one inaccessible but showing ghost files hogging 7gb of the hard drive. I'm tempted to format the drive and start again. Most of my data was copied from my old Gateway which has only 2x2gb drives, both almost full. Is the CD/RW my best route for backing up? TIA Richard ----- Original Message ----- From: "Nathalie Bugeaud" to show off > his new $3000 Compaq Presario with CD writer. Windoze XP got completely > stuck 3 times giving him no choice but having to remove the battery pack! > > When we tried my PCMCIA Sundisk Flash it wouldn't even recognise it -... > makes me appreciate my trusted LX even more! :) ... Nathalie ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 08:33:26 -0700 Reply-To: "Feldman, Robert" Sender: HPLX Mailing List From: "Feldman, Robert" Subject: OT: RE: Windoze XP MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Holding down the "on" button for 4-5 seconds usually will turn off newer laptops where Windoz has crashed so badly that the computer has locked up. I need to do this about once a week with my wife's Compaq 1247 laptop. Bob -----Original Message----- From: Nathalie Bugeaud İmailto:tps-seti@WANADOO.FR¨ Sent: Sunday, February 24, 2002 10:48 PM To: HPLX-L@UCONNVM.UCONN.EDU Subject: Windoze XP While at Poitiers Hospital i met my Ophtamologist friend trying to show off his new $3000 Compaq Presario with CD writer. Windoze XP got completely stuck 3 times giving him no choice but having to remove the battery pack! ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 10:47:03 -0800 Reply-To: Christopher Blackmon Sender: HPLX Mailing List From: Christopher Blackmon Subject: Portable monopoly... In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Could something like this be attempted for the HP LX? http://www.portablemonopoly.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 17:42:04 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: Portable monopoly... MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Christopher Blackmon wrote: > Could something like this be attempted for the HP LX? A website making you search long and hard as if for eggs on Easter Sunday before you have any idea what it is supposed to be about? Certainly, but why should we? As to lighting, that has already been covered (no reason for you not to take a new look though) on: http://www.hplx.net/articles.light.html Axel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 18:04:28 +0100 Reply-To: Juan Belmonte Sender: HPLX Mailing List From: Juan Belmonte Subject: IT'S A L I V E (was: Dead Palmtop) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi friends; IT'S ALIVE Sorry, but no time to send us more info. I only want to share my joy with you. Also i'm looking WHY!? Thanks ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 23:57:05 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Fw: Re: LxPic 7.0 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit guess this msg didn't go thru earlier .. ..pk -----Original Message----- From: Ed Padin Date: Sunday, February 03, 2002 5:53 AM >You are one the biggest contributors to this community. And a well deserved respected one .. to do much with so little code .. an astonishing instance of great things being done with absurdly frugal resources .. be it bytes in hard disk or in ram .. You deserve to be put on a pedestal Stefan ! :-)) ..pk ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 00:08:00 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: Ann. LxPic 7.0 Comments: To: Stefan.Peichl@T-ONLINE.DE MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit >-----Original Message----- >From: Stefan Peichl >Date: Monday, February 04, 2002 5:48 AM > >Feher Tamas wrote: > >> Finally finished? Stefan is optimistic... New versions bring new >> features, which make people ask for even newer features... > > I hope you are wrong ;-) he wasn't .. here's what I want .. its possible to flip the pic upside down i need to flip it left to right .. and .. to turn it 90 degrees too .. i have a bundle of pictures which are taken in the landscape mode .. and another bundle taken in the portrait mode .. i guess this will be a universal habit .. to turn the camera 90 degrees to cover more height and less width .. like when clicking your family members full length .. i'm sure it can be done .. will you do it stefan .. please .. Please .. PLEASE .. PLEEEEEZ ? ..pksharma ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 20:43:05 +0100 Reply-To: Thomas Rundel Sender: HPLX Mailing List From: Thomas Rundel Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Daniel, the OB 800 has a BIOS limit of 8GB for hard drives. To overcome this, you need to install software like the Ontrack Disk Manager which can be purchased online, or a similar program from IBM which I believe is free for users of IBM drives; just have a look at www.ibm.com and www.ontrack.com. If you don't install the Ontrack software, the OmniBook won't boot DOS. Actually, I thought it wouldn't boot at all and am quite surprised that you got Linux to boot without problems. Tom Daniel wrote: > Sorry folks, forgive me this off topic posting, but I know here are > some Omnibook users, too, and maybe just YOU know the answer... > > My problem: > > I have upgraded my OB 800CT with a 10GB hard drive and installed Linux > on it, with the plan in mind to install Windows, too. > > I created the following partitions: > > hda1: 1.5GB FAT32 for Windows > hda4: extended partition containing the following: > hda5: Linux 20 MB ext2 /boot > hda6: Linux swap 80 MB > hda7: Linux 5 GB ext3 / > hda8: lInux 3 GB ext3 /hda8 > > Installing Linux on hda5 and hda7 was no problem at all, also hda8 is > accessable without any problem (although it is beyond the 8 GB limit = of > the BIOS - Linux works around this). The machine boots nicely > with Lilo in the MBR. İsnip¨ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 21:24:32 +0100 Reply-To: Juan Belmonte Sender: HPLX Mailing List From: Juan Belmonte Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit >----- Original Message ----- >From: "Thomas Rundel" >To: >Sent: Monday, February 25, 2002 8:43 PM >Subject: Re: Off Topic: OB 800 partitioning problem Linux/Windows > >Daniel, > >the OB 800 has a BIOS limit of 8GB for hard drives. To overcome this, >you need to install software like the Ontrack Disk Manager which can >be purchased online, or a similar program from IBM which I believe is >free for users of IBM drives; just have a look at www.ibm.com and >www.ontrack.com. I got Ontrack Disk Manager from a new Seagate 13Gb drive. License says free for seagate users, also free for other brands but not supported at all. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 14:51:14 -0600 Reply-To: Bryan Biggers Sender: HPLX Mailing List From: Bryan Biggers Subject: format and control cluster size MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Is it possible to format a PCMCIA ATA card and control the cluster size on the HP200? (or any machine). I want to format a CF card with a specific cluster size for a test. Isn't there a limit on how big you can make the clusters with FAT16 also given a certain size card? Bryan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 22:53:40 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Re: format and control cluster size Comments: To: Bryan Biggers MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Bryan Biggers wrote > Is it possible to format a PCMCIA ATA card and control the > cluster size on the HP200? (or any machine). Yes, but you need a newer format on another machine. FORMAT /Z:N does the trick. N is the number of 512byte sectors per cluster. It wo'.t work on the 200LX. 1KCLUST on Super also works, but not on large cards. Michel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 16:01:32 -0600 Reply-To: Bryan Biggers Sender: HPLX Mailing List From: Bryan Biggers Subject: Re: format and control cluster size MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Thanks, that is what I did under Windows 98 and it worked, well mostly, but the numbering seems to be off. Bryan Michel Bel wrote: > Bryan Biggers wrote > > > >>Is it possible to format a PCMCIA ATA card and control the >>cluster size on the HP200? (or any machine). >> > > Yes, but you need a newer format on another machine. > > FORMAT /Z:N does the trick. N is the number of 512byte sectors per cluster. > > It wo'.t work on the 200LX. > 1KCLUST on Super also works, but not on large cards. > > Michel > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 23:09:53 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Applying hot needles to your LX, or, Poor Mans screen repair MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Having firstly researched the problems of the LX's screen on my own, and having seen the light after by Daniel Hertrich's information, I can tell you that is is indeed feasible. Of course, a SMD soldering iron helps, but there is a vastly different method available. The secret is (see subject): Applying Hot Needles to your LX's screen! You need: a) A loose LX motherboard, or an LX bottom with the Screen cable out loose b) a clamp to squeeze the screen and cable together - preferably the left inch of a broken LX screen holder cleanly sawed off. c) An LX power supply d) A carpeters needle ( with a slightly blunt point) as an smd soldering iron, eye side pushed into a cork e) A good magnifying glass ( 5-10 times ) f) A burning candle g) A lot of courage and a very firm hand. Step 1: Connect the LX parts together. ( Cable to motherboard, Screen to cable, powersupply to motherboard. Step 2: Find the loose contacts using Daniel's method as described elsewhere on this list. Step 3: Light the candle Step 4: Hold the middle of the needle into the candle until the needle is hot enough to melt the solder (that's why you need the cork). Step 5: Looking carefully throug the magnifying glass, push the needle straight onto the loose contacts, as near to the chip as you dare, onto the board until the solder melts. Take care not to shift the lead sideways and make shorts. Step 6: Immediately remove the needle. Repeat 4 to 6 until all loose contacts are repaired. Any shorts immediately show up on the screen, so clean up as necessary. Presto: A repaired screen. Oh yes, I _have_ done it this way! Two screens repaired today! DISCLAIMER: THIS MAY HURT YOUR PRECIOUS SCREEN AND MAY MAKE THINGS WORSE THAN BEFORE. TRY AT YOUR OWN RISK. That said, it _can_ be done. Good luck Michel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 22:30:28 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: CF card reader into serial port MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit pksharma wrote: > Is this correct ? then the parallel port is bi-directional ! The original IBM/PC parallel port was a full byte out and I think 4 bits in to pass back error info and control data flow. Later parallel ports became a full byte each way. The 4 bit input port can still be used for bidirectional data transfers it just takes more effort to transfer data in that direction as you have go thru 2 nibble tranfers for each byte of data. Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 17:31:52 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Re: format and control cluster size Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 You could use BOOTDMOD (also on Super) for large flash cards. I think this is better than 1KCLUS cause it let you modify other options as well and you can specify a cluster size different than 1Kb. Dario -----Original Message----- From: Michel Bel Date: Mon, 25 Feb 2002 22:53:40 +0100 To: HPLX-L@UConnVM.UConn.Edu Subject: Re: format and control cluster size > Bryan Biggers wrote > > > > Is it possible to format a PCMCIA ATA card and control the > > cluster size on the HP200? (or any machine). > > Yes, but you need a newer format on another machine. > > FORMAT /Z:N does the trick. N is the number of 512byte sectors per cluster. > > It wo'.t work on the 200LX. > 1KCLUST on Super also works, but not on large cards. > > Michel > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup 1 cent a minute calls anywhere in the U.S.! http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 22:22:09 -0000 Reply-To: "Richard E. McEvoy" Sender: HPLX Mailing List From: "Richard E. McEvoy" Subject: Re: DANIEL ROCKS (WAS: RE: SUPER question MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: DANIEL ROCKS (WAS: RE: SUPER question Wholehearted agreement. Thanks Daniel Richard ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Mon, 25 Feb 2002 23:29:05 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: Spanish Dictionary Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Hi all. Does anyone knows of any spanish dictionary (spanish-spanish, not translators, i.e. like the American Heritage but with definitions in spanish) that would work on the LX? I searched the net without success. Thanks. Dario -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 08:14:27 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: format and control cluster size MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Bryan On Mon, 25 Feb 2002 14:51:14 -0600, Bryan Biggers wrote: > Is it possible to format a PCMCIA ATA card and control the > cluster size on the HP200? (or any machine). I want to format a > CF card with a specific cluster size for a test. Isn't there a > limit on how big you can make the clusters with FAT16 also given > a certain size card? There is a program which lets you format the card with 1K cluster size. http://www.palmtop.net/search.pl?Query=1kclus GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Mar 2002 08:34:54 -0600 Reply-To: Bryan Biggers Sender: HPLX Mailing List From: Bryan Biggers Subject: Re: format and control cluster size MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Daniel Hertrich wrote: > Hi Bryan > > There is a program which lets you format the card with 1K cluster size. > http://www.palmtop.net/search.pl?Query=1kclus > I guess I should have said what I was trying to do, I was trying to keep it short for the list. I was trying to format a card with larger (32K) cluster sizes. This was reported to speed up save times on my digital camera... and it does! Apparently with the larger clusters the camera spends less time messing around in the FAT. It trims a couple seconds off the time needed to save a RAW file (about 10MB) to the card. I figured that the palmtop would be a good candidate for changing the cluster size. Bryan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 09:42:02 -0500 Reply-To: Bruce_Martin@MANULIFE.COM Sender: HPLX Mailing List From: Bruce Martin Subject: Re: Remcom & rc with 200lx MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii > > Does anyone has success with the IR remote controller software with 200LX? > > I tried both remcom and RC already, but both NG here. > > Remcom works fine for me, so I didn't try another utility. Yes it rarely > hangs my machine, but works. > I finally got a chance on the weekend to try REMCOM 1.09 from SUPER. It works perfectly with my single-speed 2Mb 200LX and tested with my Panasonic and Toshiba TVs and VCRs and Panasonic DVD. Range with all devices is consistent at up to 3 meters (10 ft.) and up to 20 degrees left or right. I installed it in the AppMgr, and launch it from there, or via the assigned key combo, or from X-Finder. One warning: don't mess with the *.rmt files - manipulate them ONLY with REMCOM! I corrupted one simply by renaming it in DOS! I hope this helps! Bruce in Toronto ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 09:45:00 -0500 Reply-To: albert.kind@uconn.edu Sender: HPLX Mailing List From: Al Kind Subject: Re: Applying hot needles to your LX, or, Poor Mans screen repair In-Reply-To: <003001c1be49$274974a0$2e75a63e@bel> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit OH SURE... Next you'll be suggesting Thumb Screws as a hinge crack fix! ;-) Cheers...AJKind -----Original Message----- From: HPLX Mailing List İmailto:HPLX-L@UCONNVM.UCONN.EDU¨On Behalf Of Michel Bel Sent: Monday, February 25, 2002 5:10 PM To: HPLX-L@UCONNVM.UCONN.EDU Subject: Applying hot needles to your LX, or, Poor Mans screen repair Having firstly researched the problems of the LX's screen on my own, and having seen the light after by Daniel Hertrich's information, I can tell you that is is indeed feasible. Of course, a SMD soldering iron helps, but there is a vastly different method available. The secret is (see subject): Applying Hot Needles to your LX's screen!... ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 16:10:18 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: DANIEL ROCKS (WAS: RE: SUPER question MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends Thank you all for the overwhelming feedback! This keeps me motivated to continue the work, because I know I don't waste my time. And BTW: Without all your help a successful wourk would not have been possible! Thanks for that, too! GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 16:10:19 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Orinoco Wireless LAN MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends On Sat, 2 Feb 2002 18:40:40 -0500, Martin Bergvill wrote: > Hi > > Somebody was talking about wireless lan vs a Ipaq on a norwegian pda > newsgroup. I asked for dosdrives and webadresses and got this: > > http://www.wavelan.com I tried to load the DOS drivers from there on the LX in order to use an Orinoco Wavelan card. But no success. The driver either said, there was no card or no compatible card services, or it wanted me to give explicitly an I/O Address nad memory range and an IRQ for card operations. When I stick the card into the 200LX's slot, LXCIC recognizes it correctly, though. Does anyone have detailed info about the PCMCIA port and which parameters could work? GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 16:10:21 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Serial Port question MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Michel On Fri, 8 Feb 2002 23:53:46 +0100, Michel Bel wrote: > As I would like to use the LX as a midi-driver, I am wondering if there is a > method short of adding a crystal to set the serial port to 31250BPS, the > midi-speed. > > If I would use an additional crystal, ( switched if necessary with a normal > single or double speed) would it interfere too much with the screen? > e.g. speed =standard*38400/31250, (if I could find such a crystal), say > 19.5Mhz I have no idea if a replacement crystal would work, but there are MIDI devices which can be controlled over a serial port. I know that a (former?) list member, Rakoto Ramparani, did this kind of thing, He used a DOS version of Cakewalk on the LX with a serial MIDI driver and connected it to some MIDI devices which had serial ports. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 16:10:22 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Ann: Czech İnot slovak¨ hfn and vfn fonts MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Dzon On Wed, 20 Feb 2002 13:43:27 +0100, Dzon wrote: > Since I couldn't find any usable hfn and vfn fonts with czech characters, > I've made them myself. It is just original VirtualReader İmost of them¨ > and hv İall of them¨ fonts included in installation, a bit :) modified. > You can got them here: Maybe your fonts files should be put on SUPER, so everyon can easily find and access them. If you want to contribute your fonts to SUPER, please send the files to super@palmtop.net and write a little bit of description about it: Author name Author email address version number abt 3-5 lines of descibing text including the keywords someone could use to search for your files and, if you have the time, a screenshot (GIF format) would be great! GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 16:10:24 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: HP LX Program Requests : Possible SUPER Enhancement. MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Eric On Sat, 23 Feb 2002 02:11:24 -0500, "Tralornik" wrote: > Isn't that something that could be done (and perhaps found already created > on the web) using Lotus 1-2-3 and some calculations? Maybe. But since 1-2-2 is not that optimized for this kind of tasks, it would not be as convenient as an app only written for that purpose. And, I don't know about other diabetics, but for me it MUST be very convenient, because otherwise I would rather avoid a glucose measurement if I know I have to fiddle around with the software for about 3 minutes just to enter the result. Ot at least I would not put so much effort in logging my measurements. The purpose of such a softwaree should be - at least for me - to encourage myself to measure the glucose more often and also write down the results quickly so I can let the LX analyze them. > What did you think about the idea of having a forum for programming ideas on > super? Judging by the very small number of responses I got from my post it > looks like there aren't too many people looking for new programs (or people > looking to create them). Honestly? - not much. ;-) There is a similar kind of thing somewhere on www.hplx.net and David didn't maintain it anymore because of the lack of contributions. I think there are too little programming projects. And the few projects going on can be discussed here on the list, IMO. But thanks for the suggestion. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 16:10:27 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Orinoco wireless lan? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Tim On Sat, 23 Feb 2002 22:50:01 -0600, tpkelley@houston.rr.com wrote: > I was wondering if anyone has found out anything more on whether we > can run wireless lan card in our LX's safely. > I have Cisci and Dell cards as well as a linksys access point at home. Generally, it should not be possible. Most cards are rated at at least 250-300 mA for transmit mode, most even up to 300-400 mA. And since the 802.11b wireless LAN standard provides sending the first packets to the access point with maximum power (and only after the BSS join procedure has been finished the card MAY reduce its transmit power for power saving reasons, if the access point is near enough), the card would crash the LX Probably with the first attempts to join a BSS. But it is worth a try, and I am still trying to get the wavelan DOS drivers to work. I want to see the failing with my own eyes, before I say it CANNOT be done! GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 16:10:29 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: LXREF MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Bob, Mike, and others On Wed, 21 Nov 2001 07:49:40 -0700, "Feldman, Robert" wrote: > It's a technical reference guide for the 100/200LX. Goes into BIOS and > hardware issues. Unfortunately, it is not a text file, but resides inside a > viewing program. > > Mike Kopplin has it at: > > www.technoir.nu/hplx/dl/lxref12.zip > www.technoir.nu/hplx/dl/lxrefpcx.zip Do you think I can put LXREF onto SUPER? This is such an essential piece of software that it would be a great gain for SUPER, I think. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 16:10:33 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: HPLX links database MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi friends, What I just thought the palmtop community might need is a database of HPLX related links. I just read through old messages in my Post/LX folders and saw so much links I have yet to check if they are interesting. That's why I had the idea: How nice it would be to have an online form where everone could add a link he has found and thinks it could be intersting to HPLX users. The form should contain the following fields: * URL * Category (to be chosen from a list) * short description or comment İSUBMIT¨ İCANCEL¨ On SUBMIT the link should be appendeded to an html file which contains all links of the chosen category. From time to time the maintainer should check if a link is outdated and if added links are really interesting or HPLX-related, and clean up a bit. The whole thing could look similar to SUPER, also the whole organisation could be similar. What do you think about that? Who would be able to write the necessary scripts / programs? Would that work with CGI perl scripts? Laust? ;-) We could put this database on a common place like hplx.net or palmtop.net... I know there is some ongoing work by one fellow list member to get the domain hplx.com (don't know if he would agree mentioning his name here, so I don't do it). This could also be a good place for such a database... GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 16:40:11 +0100 Reply-To: Erwann ABALEA Sender: HPLX Mailing List From: Erwann ABALEA Organization: Halfling Soft Subject: Re: format and control cluster size Comments: To: Bryan Biggers In-Reply-To: <3CA0870E.400@charter.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable On Tue, 26 Mar 2002, Bryan Biggers wrote: > I guess I should have said what I was trying to do, I was trying > to keep it short for the list. I was trying to format a card with > larger (32K) cluster sizes. This was reported to speed up save > times on my digital camera... and it does! Apparently with the > larger clusters the camera spends less time messing around in the > FAT. It trims a couple seconds off the time needed to save a RAW Yes, in fact, if you use a larger cluster size, you have less FAT entries= , and filling the disk with a large file involves larger and less frequent block writes. > file (about 10MB) to the card. I figured that the palmtop would > be a good candidate for changing the cluster size. Bryan The benefit is real, but you also have inconvenients. The main one is the loss of space on the drive (you statistically loose half a cluster for each file on your drive), the second one is the lower number of files you can store on the drive (it can't be larger than the number of clusters on your drive). --=20 Erwann ABALEA - RSA PGP Key ID: 0x2D0EABD5 ----- Neuneu, moi ? Peut-=EAtre. En tout cas, je ne le fais pas expr=E8s. Ca vi= ent tout seul. Des fois, un mot, m=EAme insignifiant, et =E7a part. Tenez, di= tes pour voir un mot, au hasard je pr=E9cise. -+- C In Guide du Neuneu d'Usenet : Neuneu avou=E9 est =E0 demi pardonn=E9= -+- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 08:59:08 -0700 Reply-To: "Robert K. Meyer" Sender: HPLX Mailing List From: "Robert K. Meyer" Subject: Re: Fwd: İOmniBook¨ File Request Comments: To: Eduardo Seudsnimo MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I use a couple of programs install.com and remove.com from PC Magazine that can be used to remove subsequent tsrs. They are both around 1100 bytes. Came from PC Mag's Guide to DOS 5 Memory Management. Would be glad to pass them along. Bob -- loaded resulting in only 400KB free under DOS. There is no way to get rid of the drivers without OBMAX. Another possibility is a program that can terminate TSRs. Does one exist? -- R.K. Meyer MSEE K7PPC bmeyer@union-tel.com Elk Mountain WY http://w3.union-tel.com/~bmeyer/ His name... Isaiah 9:6 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 17:58:14 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: Applying hot needles to your LX, or, Poor Mans screen repair MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > researched the problems of the LX's screen on my own, and > having seen the light after by Daniel Hertrich's information, I am too much of a latecomer to have ssen that. Could you give a link or repost it, please? Danke Axel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 18:00:41 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: Orinoco wireless lan? MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > most even up to 300-400 mA. Whereever there are LAN cables there is power. I have seen PCMCIA Adaptors with an own power supply, although it seems to my failing memeory that was for an Atari Portfolio. Still the idea as such seems to have merit, if anyone wants to take it up. Axel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Mar 2002 11:02:36 -0600 Reply-To: Bryan Biggers Sender: HPLX Mailing List From: Bryan Biggers Subject: Re: format and control cluster size MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Erwann ABALEA wrote: >> > > The benefit is real, but you also have inconvenients. The main one is the > loss of space on the drive (you statistically loose half a cluster for > each file on your drive), the second one is the lower number of files you > can store on the drive (it can't be larger than the number of clusters on > your drive). In this case, with the average file from the camera being over 2MB, the 16K lost per file with 32K clusters (or is it 14K if you count 2K lost on average for the default 4K clusters) is inconsequential; I guess on a really big card you might loose one shot due to the space waste. Probably not a good idea for your typical HP200 file size though. Bryan > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 18:11:57 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: format and control cluster size MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Erwann On Tue, 26 Feb 2002 16:40:11 +0100, Erwann ABALEA wrote: > The benefit is real, but you also have inconvenients. The main one is the > loss of space on the drive (you statistically loose half a cluster for > each file on your drive), the second one is the lower number of files you > can store on the drive (it can't be larger than the number of clusters on > your drive). If he only needs the card for his digital camera, he may not suffer from any of these inconveniences. That's a simple mathematical equation. If he knows, what he will store on the card, he can calculate the best - for him best - cluster size. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 00:14:11 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: Picture gallery / Minidisc labeling system MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit -----Original Message----- From: Daniel Hertrich Date: Monday, February 04, 2002 9:48 PM > .. developed by Helmut Lucke > .... Very interesting... >Especially the "IR router" he built is extremely innovative! :-) and boy, was i curious .. this is my kind of thing .. 'IR ROUTER' .. really innovative .. taks only a beer can ! I wish i could show you my 'Mini Disk Cutter' .. Most things we want to carry are very small in size .. and CDs are soooo cheap now .. but they are sooo big .. so i made a CD Cutter .. it cuts a 5.25 inch dia CD into a 80mm dia one .. so easy to carry in my shirt pocket .. (that's right .. its NOT a CD burner .. but a physical cutter) .. i guess you all know that unlike a floppy disk the CD is written from inside towards the outside .. so most of the personal CDs have only about 25 to 40% written space and the rest is empty space .. which cannot be used later.. so i Cut away the outside ring beyond the 80mm diameter .. give me a cute little halo to put my old photos in .. and a cute little CD to carry .. with MP3 format .. i would say it could carry about 50 songs .. different moods .. differenct songs .. different tunes .. also .. seriously .. different companies ..different data .. yearwise .. companywise .. any way wise .. and all i needed was a small hacksaw blade and the tip of a small table knife ! and the box in which one CD is usually packed .. why 80mm dia ? normal CD Rom drives have a smaller second circle for holding the small cd .. so i can run my small cd's in normal CDRoms .. one more thing .. its quite noticebaly smaller than the 3.5 inch floppy disk which is actually small but has a useless big jacket ! ..pk ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 00:24:15 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: WINCE device was: Re: HPLX-L Digest - 29 Jan 2002 to 30 Jan 2002 (#2002-34) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit -----Original Message----- From: Martin Bergvill Date: Friday, February 01, 2002 1:34 PM >What models do you have? I can get a Hp620 for free and was wondering >if it can be used for anything. Hplx will be my main machine, what's this about hp620 for free .. i've been looking for such machines for my son and brother .. but most auctions sites either don't sell .. or they need on line credit card validations .. a pain to get a credit card like that in india. i'm ready to remit thru bank channels .. for buying even used machines of the 300..600 & 800 series .. maybe liberettos too .. ..pk ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 11:56:17 -0700 Reply-To: "Batson, Dale N" Sender: HPLX Mailing List From: "Batson, Dale N" Subject: PC Card Partitions with 200LX ? MIME-version: 1.0 Content-type: multipart/alternative; boundary="Boundary_(ID_MMuIu2RcZAgtqiAxePzZwA)" This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --Boundary_(ID_MMuIu2RcZAgtqiAxePzZwA) Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT I partitioned my 128MB card into two partitions using my notebook computer (the LX couldn't partition it), but my 200LX can only see the primary partition. How can I access extended partitions from the LX? (The card is one of those cheap ones bought from ebay recently.) Thanks, Dale Batson --Boundary_(ID_MMuIu2RcZAgtqiAxePzZwA) Content-type: text/html; charset=iso-8859-1 Content-transfer-encoding: 7BIT
I partitioned my 128MB card into two partitions using my notebook computer (the LX couldn't partition it), but my 200LX can only see the primary partition. How can I access extended partitions from the LX? (The card is one of those cheap ones bought from ebay recently.)
Thanks,
Dale Batson
 
--Boundary_(ID_MMuIu2RcZAgtqiAxePzZwA)-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 00:29:30 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: WINCE device was: Re: HPLX-L Digest - 29 Jan 2002 to 30 Jan 2002 (#2002-34) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit -----Original Message----- From: Martin Bergvill Date: Friday, February 01, 2002 1:34 PM Subject: WINCE device was: Re: HPLX-L Digest - 29 Jan 2002 to 30 Jan 2002 (#2002-34) >On Thu, 31 Jan 2002 16:52:17 +1100, Ray Roche wrote: > >> Ray Roche >> Canberra >> ACT >> Australia >> >> HP200 for about 5 years, mainly for ham radio use. I also have several >> HP WinCE machines but we won't talk about those, will we? > guess i missed this msg .. RAY ROCHE, Canberra, ACT Autstralia .. if you have SEVERAL HP WinCE machines .. i'm interested .. these are not as good as the lx200/700 but they have touchscreen .. makes it much easier for my other family members to tap on the screen .. are you selling any of your 300, 600, 800 series .. if yes, get to me at pksharma@india.com please thanks .. ..pk ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 00:36:23 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: 200 LX vs. Omnigo 700 LX MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit -----Original Message----- From: John J Vanderstel Date: Friday, February 01, 2002 7:19 AM >Hi Oliver and all, > ... > ... >> I just don't understand why they are so cheap compared to the 200's? In >> Germany you have to pay at least 100 Euros to get a decent 200lx, >>the700's go for about half of that (I paid 61 Euros for the 700lx and the Nokia >> Phone!) that's how many US$ ? and in which country ? .. is it a brand new packed machine .. are more available .. ..pk ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 01:09:51 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: Stacker on PCMCIA cards MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit -----Original Message----- From: Yves Leurquin Date: Sunday, January 27, 2002 5:46 PM >Alan, >> On the subject of Stacker, Yves Leurquin implied that it required the entire >> volume to be compressed, but that has never been true. I routinely created >> Stacked volumes that took up only part of a drive. As I recall, this was >> not the default behavior, but it was always possible. For speed, I always >>created the volume (stacvol.*) files on my desktop and moved them onto the >> SRAM or flash cards that I used in the palmtop. >I would love to be proved wrong don't .. there are other truths too ! >but from what I recall from the time I tried >to setup stacker on the LX it is not possible, on a _removable_ media (i.e. >Flash card A: drive), to mount the stacker volume _and_ at the same time >access the uncompressed portion of the flash card. usually, stacker compresses the entire space on a drive and replaces the entire drive letter with a sswap command in the config.sys file BUT .. and note this .. it is equally possible to create small stacvols on the same drive even if it is a flash card .. i routinely do it .. to prevent data lockup if the one and only BIG stacvol file goes kaput .. the files are created as stacvol.000, stacvol.001, stacvol.002, and so on in some cases, i remember, it was called stacvol.dsk which was one large file .. but if you know exactly what you are doing its possible to create as many stacvols as you want .. each will be given a separate drive letter to identify it >It is possible to create a stacer volume which is smaller than the full flash >card capacity but once it is mounted, it substitutes the A: drive letter and >prevents access to the physical A: drive. not exactly .. i've explained above .. >On a fixed drive (e.g. C: drive) >however, it is indeed possible to access the physical C: drive _and_ the >mounted stacked volume. again .. not exactly .. what applies to C applies to flash card .. also applies to a floppy for that matter ! Oh yes ! you can have quite a few stacvols on a floppy too .. especially if its the 2.88 MB floppy .. and happily carry 5 to 10 MB of data .. especially if its all dbf format which has lots and lots of spaces .. >As said above, please let me know if I am wrong and I will dig up my old >Stacker 4.0 disks to give it another try. you could do that .. or try out the stacker program which i have .. it came especially with a stacpalm software .. very suited to the palmtop environment .. and guess what .. it works when i put it in my Toshiba Satellite Pro pcmcia slot .. needed to put the right lines in my config.sys file though ! ..pk ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 21:02:07 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: WINCE device was: Re: HPLX-L Digest - 29 Jan 2002 to 30 Jan2002 (#2002-34) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > they have touchscreen .. makes it much > easier for my other family members to tap on the screen .. Huh? Just recently I watched someone highly concetrated tapping stuff into his palm (lookalike?) using that pen thingy and boy did I feel smug about my 700 LX again. Each to her own - but the better stuff for me please! Axel ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 21:08:05 +0100 Reply-To: Axel.Berger@NexGo.De Sender: HPLX Mailing List From: Axel Berger Subject: Re: 200 LX vs. Omnigo 700 LX MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit > that's how many US$ ? and in which country ? .. is it a brand > new packed machine .. are more available .. About 87 US cents per Euro right now - say one to one if you are not too finicky. The 700 was started later and discontinued before the 200, there were far fewer made. What I will admit is that besides being much thicker for obvious reasons they are also decidedly bigger in the other two dimensions for no discernable reason at all. Besides they seem a bit less well made, although not suffering from the same hinge crack problem and theirs is less serious. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 22:07:07 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: 123+wysiwyg? yes!! Fwd from Gottfried! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Tony On Wed, 20 Feb 2002 12:20:29 +1300, Tony Hutchins wrote: > I just tried this on the train here. Works like magic! > > Many thanks to Gottfried. Yes! Many thanks also from me now! This is the way to get WYSIWYG work on the palmtop. I have even been able to include mouse control, simply by connecting a mouse and loading a mouse driver. Amazing! The only thing I have yet to find out is how to make the cells appear bigger in WYSIWYG mode so that the fonts become readable. Currently, almost nothing is readable if I enter text or numbers into the cells. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 23:26:19 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Where to find old stacker MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I have found that in the Maxtor archives at http://www.maxtor.com/softwaredownload/pcmcia.html with the flash card driver TFFS325.ZIP a working copy of stacker 3 is available.. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 12:02:25 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: 123+wysiwyg? yes!! Fwd from Gottfried! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Wed, 27 Feb 2002 11:57:25 +1300 (NZDT) 02h50m18s ago ... On Tue, 26 Feb 2002 22:07:07 +0200, Daniel Hertrich wrote: > Currently, almost nothing is readable if I enter text or numbers into > the cells. Daniel, :DZH gives "Huge" sells. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 12:22:06 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: 123+wysiwyg? yes!! Fwd from Gottfried! MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Wed, 27 Feb 2002 12:08:27 +1300 (NZDT) 03h01m20s ago ... On Tue, 26 Feb 2002 22:07:07 +0200, Daniel Hertrich wrote: > The only thing I have yet to find out is how to make the cells appear > bigger in WYSIWYG mode so that the fonts become readable. :DZH gives 13 rows on the display. Alternatively use F4 or the mouse to select a range and then do :FF and select a big font - 24 point is gigantic - resulting in only 6 rows in the display! - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 00:35:39 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: format and control cluster size MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Bryan Biggers wrote: > I was trying to format a card with > larger (32K) cluster sizes. This was reported to speed up save > times on my digital camera... and it does! Apparently with the Don't forget, a 1 byte file will use up that same 32k cluster of disk space. 32k clusters are fine for very large files where the percentage of possible waste is small compared to the whole file size and also for very large FAT16 disks where you don't have a choice (>2G I think). Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 00:35:44 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: HPLX links database Comments: To: Daniel Hertrich MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Daniel Hertrich wrote: > The form should contain the following fields: > > * URL > * Category (to be chosen from a list) > * short description or comment > İSUBMIT¨ İCANCEL¨ The form should also contain a date (yyyy-mm-dd or maybe just yyyy-mm) to indicate that on that date the link still worked. This would allow someone to better evaluate a questionable link if the date was quite old. The db should allow updating the dates every 6-18 months or so. I like the db idea. Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 09:21:22 +0800 Reply-To: Adrian Ho Sender: HPLX Mailing List From: Adrian Ho Subject: Re: Orinoco wireless lan? In-Reply-To: <3C7BBF39.64DD16E8@NexGo.De>; from Axel-Berger@NEXGO.DE on Tue, Feb 26, 2002 at 06:00:41PM +0100 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii On Tue, Feb 26, 2002 at 06:00:41PM +0100, Axel Berger wrote: > Whereever there are LAN cables there is power. Which almost completely negates the mobility advantages of a /wireless/ LAN card. Still... > I have seen PCMCIA Adaptors with an own power supply, > although it seems to my failing memeory that was for an > Atari Portfolio. Accurite's DoubleSlot is such a solution specifically for LXs if you're OK with being chained to a power socket, though it's too expensive for me to justify at present. Anyone used something different, whose LX lived to tell the tale? 8-) - Adrian ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 20:37:34 -0500 Reply-To: Jack Hill Sender: HPLX Mailing List From: Jack Hill Subject: unsuscribe In-Reply-To: <200202260501.g1Q51kP22627@nymx01.mgw.rr.com> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_002A_01C1BF05.6C3467C0" This is a multi-part message in MIME format. ------=_NextPart_000_002A_01C1BF05.6C3467C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit unsuscribe -----Original Message----- From: HPLX Mailing List İmailto:HPLX-L@UCONNVM.UCONN.EDU¨ On Behalf Of Automatic digest processor Sent: Tuesday, February 26, 2002 12:00 AM To: Recipients of HPLX-L digests Subject: HPLX-L Digest - 24 Feb 2002 to 25 Feb 2002 (#2002-63) ------=_NextPart_000_002A_01C1BF05.6C3467C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message
unsuscribe
-----Original Message-----
From: HPLX = Mailing=20 List İmailto:HPLX-L@UCONNVM.UCONN.EDU¨ On Behalf Of Automatic = digest=20 processor
Sent: Tuesday, February 26, 2002 12:00 = AM
To:=20 Recipients of HPLX-L digests
Subject: HPLX-L Digest - 24 Feb = 2002 to=20 25 Feb 2002 (#2002-63)

------=_NextPart_000_002A_01C1BF05.6C3467C0-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 19:23:33 -0700 Reply-To: Michael Kopplin Sender: HPLX Mailing List From: Michael Kopplin Subject: Re: LXREF In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Tue, 26 Feb 2002, Daniel Hertrich wrote: > Do you think I can put LXREF onto SUPER? > This is such an essential piece of software that it would be a great > gain for SUPER, I think. There is no information of copyright in lxref that I have found, and it was apparently only distributed on the old comports "abandonware" page, so I would guess that it was created without permission from the copyrighted SDK. I guess the question is what is SUPER's policy on questionable copyright issues? I actually wasn't publicizing those links because of that, but maybe I worry too much. If it doesn't go on super, I'll add a download page to my site for lxref and maybe a few other reference materials that aren't quite legitimate. Mike ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 19:01:28 -0800 Reply-To: Harry Mulcahey Sender: HPLX Mailing List From: Harry Mulcahey Subject: Re: Orinoco wireless lan? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Could you use one of those power outlets hooked up to a battery? I think that would work. ----- Original Message ----- From: "Adrian Ho" To: Sent: Tuesday, February 26, 2002 5:21 PM Subject: Re: Orinoco wireless lan? > On Tue, Feb 26, 2002 at 06:00:41PM +0100, Axel Berger wrote: > > Whereever there are LAN cables there is power. > > Which almost completely negates the mobility advantages of > a /wireless/ LAN card. Still... > > > I have seen PCMCIA Adaptors with an own power supply, > > although it seems to my failing memeory that was for an > > Atari Portfolio. > > Accurite's DoubleSlot is such a > solution specifically for LXs if you're OK with being chained > to a power socket, though it's too expensive for me to justify > at present. Anyone used something different, whose LX lived > to tell the tale? 8-) > > - Adrian > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 21:49:32 -0800 Reply-To: Doug Mc Vey Sender: HPLX Mailing List From: Doug Mc Vey Subject: unsubscribe MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0034_01C1BF0F.797C79E0" This is a multi-part message in MIME format. ------=_NextPart_000_0034_01C1BF0F.797C79E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable unsubscribe ------=_NextPart_000_0034_01C1BF0F.797C79E0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
unsubscribe
------=_NextPart_000_0034_01C1BF0F.797C79E0-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 20:12:24 -0800 Reply-To: dmp24@JUNO.COM Sender: HPLX Mailing List From: David M Peterson Subject: Re: Remcom & rc with 200lx MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Good day, Johnny Cave in Puerto Rico had remcon working well on his single speed 200lx several years ago. He changed out the IR LED with a higher power one. You aren't transmitting all that much, so battery life is not affected a lot. As far as I know, he doesn't work for HP any more. He might have further details. David Peterson On Tue, 26 Feb 2002 09:42:02 -0500 Bruce Martin writes: > > > Does anyone has success with the IR remote controller software > with > 200LX? .. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 22:07:59 -0700 Reply-To: Richard and Patti Smith Sender: HPLX Mailing List From: Richard and Patti Smith Organization: Orion On-Site Computer Services Subject: Re: format and control cluster size MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit The 1KCluster Size program does not work on cards greater than 30MB. I tried it. No go... > There is a program which lets you format the card with 1K cluster size. > http://www.palmtop.net/search.pl?Query=1kclus ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Tue, 26 Feb 2002 22:15:08 -0700 Reply-To: Michael Kopplin Sender: HPLX Mailing List From: Michael Kopplin Subject: Re: PC Card Partitions with 200LX ? In-Reply-To: <667ED598F8A2D311981D00508B1223800C2FF519@emss02m04.ems.lmco.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Tue, 26 Feb 2002, Batson, Dale N wrote: > I partitioned my 128MB card into two partitions using my notebook computer > (the LX couldn't partition it), but my 200LX can only see the primary > partition. How can I access extended partitions from the LX? (The card is > one of those cheap ones bought from ebay recently.) I'm afraid no one has figured this out. I worked on this for a while, trying different partition types etc., but the LX would only ever see one partition. Mike ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 10:10:58 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: Re: Orinoco wireless lan? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit A solution would be to set up a separate power pack for the LX. Maybe a 3.3 volt only would do nowadays for these cards. Off the mains, or using 3 AA cells. Unsolder the Vcc (and Vpp?) leads of the LX PCMCIA socket from the motherboard, put in a miniature switch to select internal or external power ( or a powerplug which does the work). This would also accomodate the Toshiba and IBM PCMCIA and CF harddisks as well. Michel ----- Original Message ----- From: "Harry Mulcahey" To: Sent: Wednesday, February 27, 2002 4:01 AM Subject: Re: Orinoco wireless lan? > Could you use one of those power outlets hooked up to a battery? I think > that would work. > ----- Original Message ----- > From: "Adrian Ho" > To: > Sent: Tuesday, February 26, 2002 5:21 PM > Subject: Re: Orinoco wireless lan? > > > > On Tue, Feb 26, 2002 at 06:00:41PM +0100, Axel Berger wrote: > > > Whereever there are LAN cables there is power. > > > > Which almost completely negates the mobility advantages of > > a /wireless/ LAN card. Still... > > > > > I have seen PCMCIA Adaptors with an own power supply, > > > although it seems to my failing memeory that was for an > > > Atari Portfolio. > > > > Accurite's DoubleSlot is such a > > solution specifically for LXs if you're OK with being chained > > to a power socket, though it's too expensive for me to justify > > at present. Anyone used something different, whose LX lived > > to tell the tale? 8-) > > > > - Adrian > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 13:22:07 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Nokia 6310 and Bluetooth MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable The german newspaper FAZ tested yesterday (26-FEB-02) the Nokia 6310 mobile phone, and they found out, it's Bluetooth implementation supports the headset profile only. That is, you can only use a BT headset, but you cannot connect to another PC or to any other BT equipped device! That means, the 6310, as it is sold today, cannot be used as a BT modem. The Ericsson T68 seems to be the better investement for a possible use of BT in the future. Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 14:42:27 +0100 Reply-To: Michael Lennartz Sender: HPLX Mailing List From: Michael Lennartz Subject: Re: Where to find old stacker In-Reply-To: <003e01c1bf14$a192fb20$2c66a63e@bel> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable Hallo Michael, this is a very important link. This is the driver to work with a flash card on the 200LX. It needs 21 KByte RAM. Mit freundlichem Gru=DF / Regards / Saluton Michael Lennartz lennartz-mi@gmx.net Fax: +49 89 244 34 52 57 Michel Bel schrieb am 26.02.2002: >I have found that in the Maxtor archives at > >http://www.maxtor.com/softwaredownload/pcmcia.html > >with the flash card driver TFFS325.ZIP a working copy of stacker 3 >is >available.. > >** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > Mit freundlichem Gru=DF / Regards / Saluton Michael Lennartz lennartz-mi@gmx.net Fax: +49 89 244 34 52 57 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 14:54:22 +0000 Reply-To: Stefan.Peichl@T-ONLINE.DE Sender: HPLX Mailing List From: Stefan Peichl Subject: Re: Ann. LxPic 7.0 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable pksharma wrote: > its possible to flip the pic upside down > i need to flip it left to right .. and .. > to turn it 90 degrees too .. > > i'm sure it can be done .. will you do it stefan .. Indeed it could be done, but I had to break my 64K limit and it would be *SLOW*, because screen organisation and picture formats are both line oriented. Switching to column orientation is just against the nature ot the thing. The fastest solution is to flip your palmtop as you would do with any series of paper pictures taken in landscape and portrait mode. 99,99% of all public available pictures are already in the landscape mode. If you take pictures with a digital camera with the intention to watch them using LxPic, just don't use portrait mode. It's that simple. Stefan ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 09:34:59 -0500 Reply-To: Bruce_Martin@MANULIFE.COM Sender: HPLX Mailing List From: Bruce Martin Subject: FLUFF: Re: Applying hot needles to your LX, or, Poor Mans screen repair MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Needles? I always wondered about the theraputic value of acupuncture ...but on a palmtop??? ;-) Bruce in Toronto ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 22:48:17 +0800 Reply-To: Adrian Ho Sender: HPLX Mailing List From: Adrian Ho Subject: Re: FLUFF: Re: Applying hot needles to your LX, or, Poor Mans screen repair In-Reply-To: ; from Bruce_Martin@MANULIFE.COM on Wed, Feb 27, 2002 at 09:34:59AM -0500 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii On Wed, Feb 27, 2002 at 09:34:59AM -0500, Bruce Martin wrote: > Needles? I always wondered about the theraputic value of > acupuncture ...but on a palmtop??? ;-) /White-hot/ acupuncture needles? You da man, Bruce! 8-) - Adrian ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 09:53:46 -0500 Reply-To: Bing Sender: HPLX Mailing List From: Bing Subject: lunar calendar MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Any software to make lunar calendar? Bing ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 10:11:34 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: format and control cluster size MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Bryan Biggers wrote: > > I guess I should have said what I was trying to do, I was trying > to keep it short for the list. I was trying to format a card with > larger (32K) cluster sizes. This was reported to speed up save > times on my digital camera... and it does! Apparently with the > larger clusters the camera spends less time messing around in the > FAT. It trims a couple seconds off the time needed to save a RAW > file (about 10MB) to the card. I figured that the palmtop would > be a good candidate for changing the cluster size. Bryan There are cluster size limitations. The larger the card the larger the clusters have to be. That's because there is a limit to the number of clusters you can have do to the size of the entries in the FAT. If you have 16 bit entries you can only have 65536 clusters. Also with larger clusters there is more wasted space. Every file no matter how small is allocated at least one cluster. So 100 files of 1 byte each will take 3,200,000 bytes if you have 32k clusters while those same 100 files would only take 100k if you have 1k clusters. Of course that's kind of an exaggerated, worse case situation just to illustrate the point. But that won't be a problem if you have a lot of very large files and not many small files. Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 10:22:57 -0600 Reply-To: Barry Sender: HPLX Mailing List From: Barry Subject: Re: Picture gallery / Minidisc labeling system MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Daniel Hertrich wrote: > so i Cut away the outside ring beyond the 80mm diameter .. > give me a cute little halo to put my old photos in .. and a > cute little CD to carry .. I've read a couple of articles about labelling CDs that warn to make sure the label is perfectly centered because if it's slightly out of balance it will shorten the life of the CD player. Wouldn't there be a danger of being off balance with your method? Or do you have a way to deal with that? Barry ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 13:11:57 -0500 Reply-To: "Striegel, Alan" Sender: HPLX Mailing List From: "Striegel, Alan" Subject: Re: lunar calendar MIME-Version: 1.0 Content-Type: text/plain There is a piece of shareware available for DOS called Moon Viewer that offers to create calendars, show the current phase of the moon, display it for any given date and time and more. But it needs a VGA display to run (and the documentation declares it needs a 286 to run). http://www.sarum.com/moonviewer.html It's $10 US to register it. If you have a registered version of Buddy on your palmtop, you can already determine the moon phase for any given date and time with the Map mode of WorldTime. To change to any arbitrary date/time, just press the + or - keys. You can see the display change in response to your selections of the Yr-Mo-Dy Hr:Mn. To move among them, use the arrow keys. Alan Striegel -----Original Message----- From: Bing İmailto:bxu2@UWO.CA¨ Sent: Wednesday, February 27, 2002 9:54 AM Any software to make lunar calendar? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 13:19:02 -0500 Reply-To: Eduardo Seudsnimo Sender: HPLX Mailing List From: Eduardo Seudsnimo Subject: Re: Picture gallery / Minidisc labeling system In-Reply-To: <002401c1bfab$29a86860$9e0d22d1@oemcomputer> MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I saw these litle 3" CD-RW disks in the store yesterday. They run about = twice the price as their 5" counterparts (less demand I guess). > -----Original Message----- > From: HPLX Mailing List İmailto:HPLX-L@uconnvm.uconn.edu¨On Behalf Of > Barry > Sent: Wednesday, February 27, 2002 11:23 AM > To: HPLX-L@uconnvm.uconn.edu > Subject: Re: Picture gallery / Minidisc labeling system >=20 >=20 > Daniel Hertrich wrote: > > so i Cut away the outside ring beyond the 80mm diameter .. > > give me a cute little halo to put my old photos in .. and a > > cute little CD to carry .. >=20 > I've read a couple of articles about labelling CDs that warn to > make sure the label is perfectly centered because if it's > slightly out of balance it will shorten the life of the CD > player. Wouldn't there be a danger of being off balance with > your method? Or do you have a way to deal with that? >=20 > Barry >=20 > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml >=20 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 10:41:24 -0800 Reply-To: "Martin G. Ramirez" Sender: HPLX Mailing List From: "Martin G. Ramirez" Subject: Mouse connection & gender changer Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" LXers, For those who use a serial mouse with their LX's, I have a question about the connection. From the CPack, I have the HP serial cable (F1015-80002) connected to the HP null modem adapter (5181-6639). To finish the connection to the serial mouse, I understand from prior posts that I need a gender changer. I assume this would need to be a DB9 male/female unit. Is this correct? Just wanted to be sure before I head out to try to find one. Along these lines, anyone know what the Radio Shack part# would be for this item? Thanks, Martin G. Ramirez ============================ Dr. Martin G. Ramirez Department of Biology Loyola Marymount University One LMU Drive, MS 8220 Los Angeles, CA 90045-2659, U.S.A. (310) 338-5120 FAX: (310) 338-4479 e-mail: mramirez@lmu.edu ============================= NTMail K12 - the Mail Server for Education ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 20:19:38 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Nokia 6310 and Bluetooth MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Stefan On Wed, 27 Feb 2002 13:22:07 +0000, Stefan Peichl wrote: > The german newspaper FAZ tested yesterday (26-FEB-02) the > Nokia 6310 mobile phone, and they found out, it's Bluetooth > implementation supports the headset profile only. That is, > you can only use a BT headset, but you cannot connect to > another PC or to any other BT equipped device! It's probably only a question of the firmware. They were silly if they would not develop a firmware upgrade which enables data communication via BT! > The Ericsson T68 seems to be the better investement for > a possible use of BT in the future. The T68 definitely works as a BT modem. I have tried it with a fellow's HP 680 (WinCE), and since the T39m has the same hard- and firmware, it should also work (although we have not tested it). GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 11:50:18 -0800 Reply-To: Longden_Loo@CANDLE.COM Sender: HPLX Mailing List From: Longden Loo Subject: Re: lunar calendar MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii There's also "tonite" on the SUPER site, which also isn't a lunar calendar but it shows the moon's phase (among other things) for a given time. Runs on the LX and it's free. - Longden > There is a piece of shareware available for DOS called Moon Viewer that > offers to create calendars, show the current phase of the moon, display it > for any given date and time and more. But it needs a VGA display to run > (and the documentation declares it needs a 286 to run). > http://www.sarum.com/moonviewer.html It's $10 US to register it. > > If you have a registered version of Buddy on your palmtop, you can > already determine the moon phase for any given date and time with the Map > mode of WorldTime. To change to any arbitrary date/time, just press the + > or - keys. You can see the display change in response to your selections of > the Yr-Mo-Dy Hr:Mn. To move among them, use the arrow keys. > > Alan Striegel > > -----Original Message----- > From: Bing İmailto:bxu2@UWO.CA¨ > Sent: Wednesday, February 27, 2002 9:54 AM > > Any software to make lunar calendar? ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 01:36:16 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: Mouse connection & gender changer MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit -----Original Message----- From: Martin G. Ramirez Date: Thursday, February 28, 2002 12:18 AM >For those who use a serial mouse with their LX's, I have a question about >the connection. From the CPack, I have the HP serial cable (F1015-80002) >connected to the HP null modem adapter (5181-6639). is this the one with 9pin DB male on both sides ? if yes then this attached to the serial cable makes the assembly a normal com1 port .. a normal mouse has a db9pin female connector which fits into the back of a regular computer .. IMPORTANT .. i was waiting for such a post to appear .. once upon a time, long long ago, i read a post about using a thumblina mouse .. i searched and searched and searched .. no luck .. then .. when i was searching for material for a 7key keyboard i bumped into it .. lots of them selling at 40% (?) discount .. and theyre cute .. being sold by infogrip,com .. i have details somewhere .. be glad to put them up if anyone is at all interested .. i understand that using the number keys for mousing is easier ..pk > To finish the >connection to the serial mouse, I understand from prior posts that I need a >gender changer. I assume this would need to be a DB9 male/female unit. Is >this correct? no, not correct, a db9 male/female unit is NOT a gender changer .. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 02:20:43 +0530 Reply-To: pksharma Sender: HPLX Mailing List From: pksharma Subject: Re: Ann. LxPic 7.0 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit -----Original Message----- From: Stefan Peichl Date: Wednesday, February 27, 2002 7:28 PM pksharma wrote: > its possible to flip the pic upside down > i need to flip it left to right .. and .. > to turn it 90 degrees too .. > > i'm sure it can be done .. will you do it stefan .. > Indeed it could be done, please..Please..PLEASE..PLEEEEEZ ! > but I had to break my 64K limit and the results of LXPIC version 7.0 on a Win98 with SVGA monitor using the F3 buttons was amazing .. just amazing .. and with 256MB Ram (sorry the entire 640KB in MSDos mode) its not an issue > it would be *SLOW*, not on my desktop .. > because screen organisation and picture > formats are both line oriented. Switching to column orientation > is just against the nature ot the thing. this is understandable .. don't try if its toooo difficult > The fastest solution is to flip your palmtop as you would do > with any series of paper pictures taken in landscape and > portrait mode. I'll try with my destop 2kg monitor .. ;-)) > 99,99% of all public available pictures are already in the > landscape mode. and about 50% of my picutres are family photos from OLD albums .. and lxpic 7.0 makes them look ALIVE .. better than the orginials .. wow .. > If you take pictures with a digital camera with the intention > to watch them using LxPic, just don't use portrait mode. It's > that simple. like isaac newton..'carpenter cut two holes .. one for the big cat .. one for the small' .. and carpenter asks 'sir the smaller cat can use the bigger hole to come & go out of the house ?' .. and newton responded ' oh yes, of course, why didn't i think of that ' THAT SIMPLE .. why didn't I think of it .. we're all so used to complicated thinking that i made my motto : "simplifying complcations" (this sounds complicted even to me .. but gets the idea across) ..pk ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 10:06:50 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: lunar calendar MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Thu, 28 Feb 2002 09:09:10 +1300 (NZDT) 05h15m24s ago ... On Wed, 27 Feb 2002 09:53:46 -0500, Bing wrote: > Any software to make lunar calendar? If you want data as shown in most lunar calendars (aspects of moon with the planets, and signs, void of course, etc) then you need an astrological program. I don't know of any free programs that run on the palmtop. If you can get pre 1990 versions you should be fine. I use an old copy of "Blue Star" and it will do a lunar calendar based on any time-zone, as a "Transit on Transit" task. Hope this helps. -Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 16:15:00 -0500 Reply-To: Bing Sender: HPLX Mailing List From: Bing Subject: Re: lunar calendar Comments: To: Tony Hutchins In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Actually, I want to know in advance the lunar new year's day or other important days when most of eastern asian celebrate. Bing On Thu, 28 Feb 2002, Tony Hutchins wrote: > Thu, 28 Feb 2002 09:09:10 +1300 (NZDT) > > 05h15m24s ago ... > On Wed, 27 Feb 2002 09:53:46 -0500, Bing wrote: > > > Any software to make lunar calendar? > > If you want data as shown in most lunar calendars (aspects of > moon with the planets, and signs, void of course, etc) then > you need an astrological program. I don't know of any free > programs that run on the palmtop. If you can get pre 1990 > versions you should be fine. I use an old copy of "Blue Star" > and it will do a lunar calendar based on any time-zone, as a > "Transit on Transit" task. Hope this helps. > > -Tony > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 08:41:07 +0800 Reply-To: "R.S." Sender: HPLX Mailing List From: "R.S." Subject: Re: lunar calendar Comments: To: Bing MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 7bit You should find a program called "lunarcal" here: ftp://ftp.cuhk.hk/pub/chinese/ifcss/software/dos/cal/ but it only valid till year 2000. If I remember correctly, I'd tried it on 200LX and it works. There is another one I'd found, which can display chinese characters too, but you will hv to install another program to do that. I forgot if it can display after year 2000. Roger ----- Original Message ----- From: "Bing" To: Sent: Thursday, February 28, 2002 5:15 AM Subject: Re: lunar calendar > Actually, I want to know in advance the lunar new year's day or other > important days when most of eastern asian celebrate. > > Bing > > > On Thu, 28 Feb 2002, Tony Hutchins wrote: > > > Thu, 28 Feb 2002 09:09:10 +1300 (NZDT) > > > > 05h15m24s ago ... > > On Wed, 27 Feb 2002 09:53:46 -0500, Bing wrote: > > > > > Any software to make lunar calendar? > > > > If you want data as shown in most lunar calendars (aspects of > > moon with the planets, and signs, void of course, etc) then > > you need an astrological program. I don't know of any free > > programs that run on the palmtop. If you can get pre 1990 > > versions you should be fine. I use an old copy of "Blue Star" > > and it will do a lunar calendar based on any time-zone, as a > > "Transit on Transit" task. Hope this helps. > > > > -Tony > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 13:52:57 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: lunar calendar MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Thu, 28 Feb 2002 13:28:36 +1300 (NZDT) 03h13m36s ago ... On Wed, 27 Feb 2002 16:15:00 -0500, Bing wrote: > Actually, I want to know in advance the lunar new year's day > or other important days when most of eastern asian celebrate. If those days all relate to moon phases - they probably do - then you can use Andreas Garzotto's "ADBMOON.ZIP" program (at www.dasoft.com, and possibly at S.U.P.E.R. as well). I ran that to project moon phases out for a few years and use it in PIM/LX. Or, there might well be an old program out there that projects the Asian holidays. I did find one for Jewish holidays, for example. But, there are many countries in Asia - to see all the holidays for 2002: http://www.asiasource.org/events/asiaholidays.cfm - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 20:07:28 -0500 Reply-To: John J Vanderstel Sender: HPLX Mailing List From: John J Vanderstel Subject: Has anyone ever run across Terminator 2? MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi All, I ran across an odd text clipping on my hard drive of unknown origin. I tried to run it down but my suspicions were confirmed when I found that the URL wasn't good anymore. Has anyone ever run across this little freeware program? Sounds like a rather intriguing possibility for use on a HP200LX. --- Terminator 2 - This package seems to go out of its way to make itself as troublesome as possible, but it has the only freeware fax reception program I've found so far. Be sure to modify the file FAX\SIGN.APF, which will make your faxes look laughable. Suggestions for other fax programs are most welcome! http://www.i1.net/~paul/t2.html --- Cheers! John Vander Stel Grand Rapids, Michigan ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 18:28:07 -0700 Reply-To: Michael Kopplin Sender: HPLX Mailing List From: Michael Kopplin Subject: Re: Has anyone ever run across Terminator 2? In-Reply-To: <20020227.200748.-234331.1.j_vanderstel@juno.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Wed, 27 Feb 2002, John J Vanderstel wrote: > I ran across an odd text clipping on my hard drive of unknown origin. I > tried to run it down but my suspicions were confirmed when I found that > the URL wasn't good anymore. It's available for download at http://sac-ftp.externet.hu/comm1.html in 6 parts. One says it has 286 executables. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 21:53:20 -0600 Reply-To: Curtis Cameron Sender: HPLX Mailing List From: Curtis Cameron Organization: None Subject: Re: a suggestion for Opera Comments: To: Howard Brazee In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Howard Brazee wrote: >Oprah's parents misspelled "Opera" when they named her. I believe it was >accidental. But you don't seee PKZIP worrying about being called the >pinhead compressor. Actually, they misspelled "Ophrah," which is a name from the Bible. -- Curtis Cameron ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 17:01:00 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: lunar calendar MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Thu, 28 Feb 2002 16:30:32 +1300 (NZDT) 02h49m25s ago ... On Thu, 28 Feb 2002 08:41:07 +0800, R.S. wrote: > You should find a program called "lunarcal" here: > ftp://ftp.cuhk.hk/pub/chinese/ifcss/software/dos/cal/ Thanks Roger! I reckon Bing might want datestar.zip from there. It does lunar calcs after 2000. - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Wed, 27 Feb 2002 23:25:58 -0700 Reply-To: kwmiller@azbcs.com Sender: HPLX Mailing List From: "ABCS INC." Subject: TECH: Check for Doublespeed crystal MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit To any and all, Is there a program to load on the 200lx that would tell me if a doublespeed chip has been installed? thx Kevin ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 01:47:00 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: problems with ol2lx MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable I do not get new appointments converted from hplx to outlook. Although I see with app200 that new appointments are in the file appt.adb which I transferred from the hplx, they do not appear in tmpa.txt. Appointments stop at the end of 2001 to appear. Do I edit appointment in 2001 they appear changed in tmpa.txt. So it must be the right file. What could I do wrong? Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 11:10:51 +0100 Reply-To: radek.svagr@LGPHILIPS-DISPLAYS.COM Sender: HPLX Mailing List From: Radek Svagr Subject: newmedia pcmcia modem MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii I have a chanbce to buy cheap used PCMCIA modem 14400 made by NEWMEDIA. However testing it before I buy it is impossible. Is anyone using this modem in 200LX? Radek ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 11:25:29 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Picture gallery / Minidisc labeling system MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Barry On Wed, 27 Feb 2002 10:22:57 -0600, Barry wrote: > Daniel Hertrich wrote: > > so i Cut away the outside ring beyond the 80mm diameter .. > > give me a cute little halo to put my old photos in .. and a > > cute little CD to carry .. Wrong quoting. I didn't write that! GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 11:25:30 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Mouse connection & gender changer MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Martin On Wed, 27 Feb 2002 10:41:24 -0800, "Martin G. Ramirez" wrote: > For those who use a serial mouse with their LX's, I have a question about > the connection. From the CPack, I have the HP serial cable (F1015-80002) > connected to the HP null modem adapter (5181-6639). To finish the > connection to the serial mouse, I understand from prior posts that I need a Please have a look at http://www.daniel-hertrich.de/rs232 That should answer all your questions. > Along these lines, anyone know what the Radio Shack part# would be for > this item? No idea about part numbers at Radio Shack, sorry. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 13:25:21 +0200 Reply-To: Daniel Hertrich Sender: HPLX Mailing List From: Daniel Hertrich Subject: Re: Nokia 6310 and Bluetooth MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Hi Stefan On Thu, 28 Feb 2002 13:13:50 +0000, Stefan.Peichl@t-online.de wrote: > Is the HP 680 Bluetooth equipped? Did you use a BT connection > between the HP 680 and the T68 for going online via GSM? This guy has a Compact Flash Bluetooth card for his 680. Yes, we went online. I think it was GSM. Maybe HSCSD. GTX daniel -- http://www.daniel-hertrich.de/contact ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 08:18:01 -0500 Reply-To: Steve Sender: HPLX Mailing List From: Steve Subject: Re: PC Card Partitions with 200LX ? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Michael Kopplin wrote: > > I partitioned my 128MB card into two partitions using my notebook computer > > (the LX couldn't partition it), but my 200LX can only see the primary > > partition. How can I access extended partitions from the LX? (The card is > > one of those cheap ones bought from ebay recently.) > I'm afraid no one has figured this out. I worked on this for a > while, trying different partition types etc., but the LX would > only ever see one partition. Mike Did anyone try more than one partition with the Minix distribution for the 200LX? Steve ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 09:18:27 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Sending SMS with post/lx? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Trying to send sms with post/lx using sms.scr in connection with my NOKIA 6310, I encounter a problem: After the command AT+CMGD=3D0 I see ERROR 321 on the screen. Then it stops. What might be wrong in the sms.scr for the 6310? Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 10:55:07 -0330 Reply-To: palmtop@warp.nfld.net Sender: HPLX Mailing List From: Tom Rowsell Organization: Exploits Image Communications Subject: OT: Jornada 820 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=iso-8859-1 Hi all: Are there any listers here that own Jornada 820's ? I'd like to hear some comments about them. Email me off list...I don't want to be expelled from the 200LX arena :) Tom ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 11:47:00 -0700 Reply-To: Michael Kopplin Sender: HPLX Mailing List From: Michael Kopplin Subject: Re: PC Card Partitions with 200LX ? In-Reply-To: <3.0.6.16.20020228071856.1b6f3bae@Server030.FWB.SAIC.Com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Thu, 28 Feb 2002, Steve wrote: > > > I partitioned my 128MB card into two partitions using my notebook computer > > > (the LX couldn't partition it), but my 200LX can only see the primary > > > partition. How can I access extended partitions from the LX? (The card is > > > one of those cheap ones bought from ebay recently.) > > > I'm afraid no one has figured this out. I worked on this for a > > while, trying different partition types etc., but the LX would > > only ever see one partition. > > Did anyone try more than one partition with the Minix > distribution for the 200LX? The minix that works on the LX uses the dos-file-as-partition scheme, so it doesn't actually use real partitions. I have run it using two files, for extra "partitions" but that's not the same. Once minix is running it can't see anything of the card beyond the dos files. Perhaps real partitions would work using Dubbs method, but I have never tried to get it working. Maybe that's another thing I'll add to my list of things to look at if I ever can find the time. Mike ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 19:47:19 +0100 Reply-To: furlan@gmx.net Sender: HPLX Mailing List From: "Dr. Werner Furlan" Organization: OE9FWV Subject: Re: Ann. LxPic 7.0 Comments: To: pksharma MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT hi PK, if you need a free but very powerful picture viewer for your desktop computer try irfanview. You can flip images with a short key in miliseconds and many other goodies. Download for free at. Werner > -----Original Message----- > From: Stefan Peichl > Date: Wednesday, February 27, 2002 7:28 PM > > > pksharma wrote: > > > its possible to flip the pic upside down > > i need to flip it left to right .. and .. > > to turn it 90 degrees too .. > > > > i'm sure it can be done .. will you do it stefan .. > > > Indeed it could be done, > > please..Please..PLEASE..PLEEEEEZ ! > > > > but I had to break my 64K limit and > > > the results of LXPIC version 7.0 on a Win98 > with SVGA monitor using the F3 buttons > was amazing .. just amazing .. and with 256MB > Ram (sorry the entire 640KB in MSDos mode) > its not an issue > > > > it would be *SLOW*, > > not on my desktop .. > > > because screen organisation and picture > > formats are both line oriented. Switching to column orientation is > > just against the nature ot the thing. > > > this is understandable .. don't try if its toooo difficult > > > > > The fastest solution is to flip your palmtop as you would do > > with any series of paper pictures taken in landscape and > > portrait mode. > > > I'll try with my destop 2kg monitor .. ;-)) > > > > > 99,99% of all public available pictures are already in the > > landscape mode. > > > > and about 50% of my picutres are family photos from OLD > albums .. and lxpic 7.0 makes them look ALIVE .. better than > the orginials .. wow .. > > > > > If you take pictures with a digital camera with the intention > > to watch them using LxPic, just don't use portrait mode. It's > > that simple. > > > like isaac newton..'carpenter cut two holes .. one for the big > cat .. one for the small' .. and carpenter asks 'sir the smaller > cat can use the bigger hole to come & go out of the house ?' > .. and newton responded ' oh yes, of course, why didn't i think > of that ' > > THAT SIMPLE .. why didn't I think of it .. we're all so used > to complicated thinking that i made my motto : > "simplifying complcations" (this sounds complicted even to > me .. but gets the idea across) > > ..pk > -- Powered by Pegasus Mail - free at http://www.pmail.com Homepage: http://www.qsl.net/oe9fwv SMS: +436646340014@text.mobilkom.at ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Mar 2002 08:30:27 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Sending SMS with post/lx? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Fri, 1 Mar 2002 07:56:33 +1300 (NZDT) 04h38m06s ago ... On Thu, 28 Feb 2002 09:18:27 -0500, Ulrich Allen wrote: > Trying to send sms with post/lx using sms.scr > in connection with my NOKIA 6310, I encounter a problem: > After the command AT+CMGD=0 I see ERROR 321 > on the screen. Then it stops. > What might be wrong in the sms.scr for the 6310? the CMGD is in sms_get.scr. Error 321 means the 6310 did not like the index value of 0. Did it download a message? Maybe try with no download arrow in POST/LX? Then sms_get will not be called. Sending might work. - Tony Also I recomment trying postpdu. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 20:24:25 +0100 Reply-To: Norbert_Giese@T-Online.de Sender: HPLX Mailing List From: Norbert Giese Subject: Question regarding Quick/LX MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, I tested Quick/LX and find it really good. However, after several problems came up: - the 'starting/stop charging' message delayed to more then 30 seconds. - 1-2-3 macros could not be stopped anymore. I changed the TSR's position in AUTOEXEC.BAT with no success. Any hints? Norbert -- Norbert Giese, A.Stifter-Weg 10, 71116 Gaertringen ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 20:13:20 +0100 Reply-To: Norbert_Giese@T-Online.de Sender: HPLX Mailing List From: Norbert Giese Subject: To LX-Batch users - SetClipFile problem MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Just for your information: The LX-Batch GetClipFile function (write clipboard content to file) duplicates the last character. For example, if the clipboard contains "abcd", you will see "abcdd" in the file. Norbert -- Norbert Giese, A.Stifter-Weg 10, 71116 Gaertringen ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 19:43:04 +0100 Reply-To: Norbert_Giese@T-Online.de Sender: HPLX Mailing List From: Norbert Giese Subject: Re: Question regarding clipboard and Fn-Copy in 1-2-3 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, I was able to break down the problem described in a previous note: "If the LX-Batch SetClip function writes to the clipboard, subsequent attempts from Lotus 1-2-3 to write to the clipboard with Fn-Copy will fail (with a message similar to 'Copy not possible. Range too large')." To reproduce this: - Issue LXB SetClip "DataToClip" from DOS box, then close the box. - Open 1-2-3, fill a cell with "xxx", and try Fn-Copy on this cell. Would someone prove this, to ensure this problem is not local? The circumvention I found is an intermediate 'write to clipboard' in a 'true' SMC application. Just to let you know. Norbert -- Norbert Giese, A.Stifter-Weg 10, 71116 Gaertringen ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 14:57:57 -0500 Reply-To: Ulrich Allen Sender: HPLX Mailing List From: Ulrich Allen Subject: Re: Sending SMS with post/lx? Comments: To: Tony Hutchins MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Tony wrote: > Maybe try with no download arrow in POST/L Great idea, Tony. Sending does work. That's certainly most important. Now I could change the value for CMGD? Uli ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Mar 2002 09:46:55 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Sending SMS with post/lx? MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="__next_part__1371193850__" --__next_part__1371193850__ Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Fri, 1 Mar 2002 09:36:35 +1300 (NZDT) 38m38s ago ... On Thu, 28 Feb 2002 14:57:57 -0500, Ulrich Allen wrote: > Sending does work. That's certainly most important. > Now I could change the value for CMGD? Looking at my sms_get.scr I can't see how AT+CMGD=0 should happen. Do you have something like this?: ---- echo Retrieving messages from memory $a1\n echo ($n2 msgs max)...\n ; n1 is msg counter = n1 1 file a $c9sms.I ; main loop :rlp = c5 send AT+CMGR=$n1\r ---------- That "n1" is the variable used. It starts at 1. I attach smsget.zip which containes the sms_get.scr I have - maybe I changed it - I can't remember. Ciao, Tony --__next_part__1371193850__ Content-Type: application/octet-stream; name="SMSGET.ZIP " Content-Transfer-Encoding: base64 UEsDBBQAAAAIAASOuShT3V3zKAMAAFMGAAALAAAAU01TX0dFVC5TQ1J1VF1T2zoQffeM/8PC5AEP EOIkQHGahzQEpoUQxoE7987wotiKo15bysgKhf74THdl2QTa5sHR2dWe/dYAYm604M8c5tM5FLws WcZLMCutNtkK4tmX2cPJ7b++N4BHUkXwoGDBIWF5zlNYalWQZXs+juGHMCukKJR+BfO65sBKYDrb FFwaIhjJVHOUXTP9UxmjwPd8T1rH96o042UGUkm+K/O9ISQX0BKG7g6g5DlPTO2EyRQybsAow3KQ m2LBNaglFGVWgpDoQXZ9r+R4bfRwOL6fzof7LRbuP2nfiwr2gha+hwS+J5ZwsOCZkDC7CSBTBrWV dK8SW+sAaqMhMkPL9Oypj6cunYSBluxXdp/x2A0otEyptLYgbdTIvm+KdUMZ1V59jycrVTdGyOyt LbbcLnlM5Em6uwfoq8oaGYJ2u02aAcgQRElySNRGGq5tGCGE5GQpcuwQtJKLsijbX6v6FgxzzZVa Yzw6X9vyn+6UcHodD1syfNLw1ygxyRAjoIS4IYoPBZ7E8SwOsNMY164cyefvxE3l0WkAjoyCTJnh NjJqwSlJjCgqSQ8lZyRZr5TkbiSshprUr5tUtUv2qBLkaonlSSGejAMsmOaJ03Zckk+dfkdkUmme woHaYPcw34BqbDtICjSJnOl6Y+B4u93ebd/9sMpbMqkioNiTHmED+/Q56YQncPxtdHdcoS6iq8kX h3qIpqPYoT6i0X2NTq3uP4fOiOWxZjm36NahT2T3eO3QBaL55L5CYQfRbPzgEMVyN/vHIYrlcjK2 6NhWo8ryEhsRQas8OD/6FOBf9+gs6Hbw0DkKCV8chefBTs79Jl+yvtKqiKrVJjjfLL7zxET2VbAz Q1JL1u8gC9laiTB0xHq7ug9gxWSa82YAU2YYSP5iIBeSl3gTJX+YRFr1osxS++bYiWvJXgDl/2Jd B+WcRbXM9tux2QjstDZDIpUB9sxEzhY5b78NCMZiL9Kz87vDRt3wpDznRsjM7tHO8l1Wy0cZ8fxd RntvKTlVQza7adcFqx3ZV+CQpt89Wm4PPg+rV0tX+VmKS1ok/bbmH94gy23fkoRMfO8XUEsBAhQA FAAAAAgABI65KFPdXfMoAwAAUwYAAAsAAAAAAAAAAQAgAAAAAAAAAFNNU19HRVQuU0NSUEsFBgAA AAABAAEAOQAAAFEDAAAAAA== --__next_part__1371193850__-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Mar 2002 10:16:10 +1300 Reply-To: Tony Hutchins Sender: HPLX Mailing List From: Tony Hutchins Subject: Re: Sending SMS with post/lx? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Fri, 1 Mar 2002 10:05:52 +1300 (NZDT) 18m57s ago ... On Fri, 1 Mar 2002 09:46:55 +1300 (NZDT), Tony Hutchins wrote: > I attach smsget.zip which containes the sms_get.scr I have - > maybe I changed it - I can't remember. If the attachment didn't arrive let me know. I got it here OK, but I also got another message from an somebody's anti-virus scanner saying that the attachment was deleted because it contained an unauthorised file. Probably the scanner found ".SCR" inside the zip. Anyway, looks like it was not in fact deleted for everybody. I won't try to attach anything again, but it was under 1KB and I was in a hurry - Tony ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 22:23:16 +0100 Reply-To: "Helmuth E. Guenther" Sender: HPLX Mailing List From: "Helmuth E. Guenther" Subject: Re: Sending SMS with post/lx? MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Ulrich, > Trying to send sms with post/lx using sms.scr > in connection with my NOKIA 6310, I encounter a problem: > After the command AT+CMGD=0 I see ERROR 321 > on the screen. Then it stops. > What might be wrong in the sms.scr for the 6310? > Uli I used it with pdu (S. Peichl) and postpdu (T. Hutchins) and it didn't show any error. So for me hard to tel what might be wrong. Kind regards Helmuth ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 14:37:41 -0700 Reply-To: Richard and Patti Smith Sender: HPLX Mailing List From: Richard and Patti Smith Organization: Orion On-Site Computer Services Subject: A suggestion for Opera MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Actually, the misspelling was "Orpah" (See Ruth 1:4, 14), and I heard it was done by the people who created her birth certificate, Which, of course, is relatively insignificant and has little to do with the 200LX, unless I include the fact that I looked it up on the Scriptures program on my palmtop! ;-) > >Oprah's parents misspelled "Opera" when they named her. I believe it was > >accidental. But you don't seee PKZIP worrying about being called the > >pinhead compressor. > Actually, they misspelled "Ophrah," which is a name from the Bible. -- Richard & Patti Smith -- "Now is the time for all good people to come to the aid of their country" ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 22:07:46 +0000 Reply-To: Russel Brooks Sender: HPLX Mailing List From: Russel Brooks Subject: Re: lunar calendar MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Lunation (the lunar calendar cycle) is 29.53 days. Once you know what the current phase of the moon is you can calculate future similar phases at 29.53 day intervals. Cheers... Russ ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 23:12:37 +0100 Reply-To: Michel Bel Sender: HPLX Mailing List From: Michel Bel Subject: IDE adapter info for PCMCIA and CF ATA flash cards MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Those looking hard for a fast adapter to backup their CF or PCMCIA flash cards to their desktop PC's, and are not too scared of soldering, should look at the following pages describing how to connect your flash cards to a desktop IDE connector http://www.ant-computing.com/v0/v0-flash.html for adapting a CF adapter, and http://www.wau.nl/hemeltje/temporary/personal/miscelaneous/cfadapter.html for some more info Michel ( off to soldering....) ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 18:25:54 -0500 Reply-To: Dario Draiman Sender: HPLX Mailing List From: Dario Draiman Subject: MiniLinux (Was: Re: Re: PC Card Partitions with 200LX ?) Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Anyone tried MiniLinux? It works under DOS but I don't remember if needs 286 or 386 to work. -----Original Message----- From: Michael Kopplin Date: Thu, 28 Feb 2002 11:47:00 -0700 To: HPLX-L@UConnVM.UConn.Edu Subject: Re: PC Card Partitions with 200LX ? > On Thu, 28 Feb 2002, Steve wrote: > > > > > I partitioned my 128MB card into two partitions using my notebook computer > > > > (the LX couldn't partition it), but my 200LX can only see the primary > > > > partition. How can I access extended partitions from the LX? (The card is > > > > one of those cheap ones bought from ebay recently.) > > > > > I'm afraid no one has figured this out. I worked on this for a > > > while, trying different partition types etc., but the LX would > > > only ever see one partition. > > > > Did anyone try more than one partition with the Minix > > distribution for the 200LX? > > The minix that works on the LX uses the dos-file-as-partition > scheme, so it doesn't actually use real partitions. I have run > it using two files, for extra "partitions" but that's not the > same. Once minix is running it can't see anything of the card > beyond the dos files. > > Perhaps real partitions would work using Dubbs method, but I > have never tried to get it working. Maybe that's another thing > I'll add to my list of things to look at if I ever can find the > time. > > Mike > > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml > > -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 15:49:43 -0800 Reply-To: Harry Mulcahey Sender: HPLX Mailing List From: Harry Mulcahey Subject: help! MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit It seems that my HP200LX now hates my PC. Whenever I try to scan the COM ports, or connect to the HP, it says it does not detect it. I have the filer app running, server mode is enabled, it is connected to the HP and the PC. When I scan the COM ports, because I have the correct speed when I start the scan, it says it cannot connect to the HP200LX. Please help me. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 16:07:50 -0800 Reply-To: Harry Mulcahey Sender: HPLX Mailing List From: Harry Mulcahey Subject: Re: Help! MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit BTW, I just tried reinstalling Transfile. It still wont work. Please help me. I really need to transfer these files. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 19:18:26 -0500 Reply-To: Bill Sprague Sender: HPLX Mailing List From: Bill Sprague Subject: I'm doing something wrong..What? MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Hi, I've downloaded and installed OL2LX, installed it, updated VR, etc. to my Libretto 110CT which is running Windoze 98 and Outlook 2000. Here's MY problem (MY, because I'm sure there's nothing wrong with the program... but rather, I'm sure it's something I'm doing wrong.).... I keep getting and error message that says "Error: unable to load data into phone.pdb from text file." What am I doing wrong? Thanks, Bill ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 19:30:15 -0500 Reply-To: Bill Sprague Sender: HPLX Mailing List From: Bill Sprague Subject: Re: I'm doing something wrong..What? In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Update: Just tried again and now I get: "OL2LX caused an invalid page fault in module HPDB.DLL at 0177:01914abe." I don't pretend to know Windoze. That's why I have an HP200LX! Thanks again. Hi, I've downloaded and installed OL2LX, installed it, updated VR, etc. to my Libretto 110CT which is running Windoze 98 and Outlook 2000. Here's MY problem (MY, because I'm sure there's nothing wrong with the program... but rather, I'm sure it's something I'm doing wrong.).... I keep getting and error message that says "Error: unable to load data into phone.pdb from text file." What am I doing wrong? Thanks, Bill ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 19:46:25 -0500 Reply-To: David Heath Sender: HPLX Mailing List From: David Heath Subject: INSTALLATION HELP FOR ONLINE BIBLE MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_00AB_01C1C090.9B75D960" This is a multi-part message in MIME format. ------=_NextPart_000_00AB_01C1C090.9B75D960 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Anyone have a step-by-step set of instructions for installation of = online Bible software to work with hisword? If so, please make it available. Also, looking for location to download = AV-NIV OLB file. Dave ------=_NextPart_000_00AB_01C1C090.9B75D960 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Anyone have a step-by-step set of = instructions for=20 installation of online Bible software to work with hisword?
 
If so, please make it available.  = Also,=20 looking for location to download AV-NIV OLB file.
 
Dave
------=_NextPart_000_00AB_01C1C090.9B75D960-- ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 20:30:43 -0500 Reply-To: David Heath Sender: HPLX Mailing List From: David Heath Subject: Re: INSTALLATION ISSUES/ HISWORD/OLBIBLE MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit ----- Original Message ----- From: "Robert K. Meyer" To: "David Heath" Sent: Thursday, February 28, 2002 6:34 PM Subject: Re: INSTALLATION ISSUES/ HISWORD/OLBIBLE > > > David Heath wrote: > > > > Part 1.1 Type: Plain Text (text/plain) > > Encoding: quoted-printable > Robert, > > Robert, I am having problems installing olbible and using > hisword. I started out by setting up my directory structure > on my 200LX as follows: a:\hisword; a:\hisword\av... > *** The above files are the installation for the Online > Bible program as I recall. They are set up in size to fit > 360K floppy. > > *** There are separate files/disks for the notes and Bibles. > In scholarship.zip, you will probably find a couple of > files, each of which can be copied onto a floppy disk. When > running install, the program will ask you for any modules. > This is the point where you would insert the disks for > "scholar", etc. > > I ran install.exe to install it to my hardrive. I answered > "A" to begin the installation, "N" to avoid compression... > *** They are in separate files. The authorized version will > go into c:\bible\av > I have read all of the documentation I could find on setting > up hisword and olbible. It doesn't appear I have all of the > files I need as I am missing the following files: bible.exe, > bible.ini, mhcc.map, notes.map, paragrap.map, scofield.map, > screen.opt. Your email showed these files in your a:\bib > folder. However, I don't know where to download these files. > > *** Yes, you are missing files. > > Also, your second email lists several bat files. I am not > clear on how to use these bat files in relation to hisword > and olbible. Are these files necessary for all... > > *** Being a lazy sort, I just type "b" (for Bible) and it > executes the program. av.bat was created by the installation > program. I created b.bat so I did not have to place the > Online Bible in the DOS path. > Also, I have found where to go and purchase the unlock key > for AV-NIV. However, I haven't been able to locate the > address for downloading the file. Do you know where this > file can be located? Your assistance in getting these > programs working would be appreciated. > > *** I will probably have to make up a CD for all the DOS > Online Bible stuff I have. I have gotten verbal permission > from Larry Pierce to post such. Wesley's notes I need to > contact the author. AV-NIV requires a key. Should be > available from Online Bible. Probably about $20 per version > because of copyright kickback. AV does not have a kickback. > > *** This may answer some questions. As I said, it appears I > need to make a CDROM for distribution. I also have a few > printed spiral bound manuals from Online Bible on the DOS > version. > > Bob Bob, Thanks for the info. I have been to Online Bible and the AV-NIV version is not listed in the DOS section of their web site. Do you have any other ideas where the file can be downloaded? Dave ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 21:19:51 -0500 Reply-To: Bing Sender: HPLX Mailing List From: Bing Subject: MPG program MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII I am using HP200 to track the car consumption of gasoline. I found two programs, MPGTracker and HPMILE. The former only has entry in gallons and miles. The later, which has better graphical display and is said to allow entry of kilos and litres, seems not accessable from SUPER link. Anybody has a copy of new version HPMILE? Thanks. Bing ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 19:47:36 -0700 Reply-To: "Robert K. Meyer" Sender: HPLX Mailing List From: "Robert K. Meyer" Subject: Re: I'm doing something wrong..What? Comments: To: Bill Sprague MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hmmmm. Most don't pretend to know DOS, that's why they have Windoze?! :) Bob Bill Sprague wrote: > > I don't pretend to know Windoze. That's why I have an HP200LX! > -- R.K. Meyer MSEE K7PPC bmeyer@union-tel.com Elk Mountain WY http://w3.union-tel.com/~bmeyer/ His name... Isaiah 9:6 ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Fri, 1 Mar 2002 11:27:02 +0800 Reply-To: Teo Soon Bock Sender: HPLX Mailing List From: Teo Soon Bock Subject: Re: MPG program In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed At 09:19 PM 2/28/02 -0500, Bing wrote: >I am using HP200 to track the car consumption of gasoline. I found two >programs, MPGTracker and HPMILE. The former only has entry in gallons and >miles. The later, which has better graphical display and is said to allow >entry of kilos and litres, seems not accessable from SUPER link. Anybody >has a copy of new version HPMILE? >Thanks. > >Bing > On the SUPER site, there is a Lotus 1-2-3 spreadsheet Mileage Tracker (6 KB). Not sure whether it is in metric format or not. I am using the same spreadsheet, but all the data and formulae are in kilos and litres. ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 20:45:55 -0700 Reply-To: Michael Kopplin Sender: HPLX Mailing List From: Michael Kopplin Subject: Re: MPG program In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII On Thu, 28 Feb 2002, Bing wrote: > I am using HP200 to track the car consumption of gasoline. I found two > programs, MPGTracker and HPMILE. The former only has entry in gallons and > miles. The later, which has better graphical display and is said to allow > entry of kilos and litres, seems not accessable from SUPER link. Anybody > has a copy of new version HPMILE? Looks like there was a version 5. Link on SUPER is old, for 4.4. See http://www.btinternet.com/~boughen/page4.html although I didn't see a link for download. You could contact the author, see his Details page for email address. Mike ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml ========================================================================= Date: Thu, 28 Feb 2002 22:42:44 -0600 Reply-To: Curtis Cameron Sender: HPLX Mailing List From: Curtis Cameron Organization: None Subject: Re: problems with ol2lx Comments: To: Ulrich Allen In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit On Thu, 28 Feb 2002 01:47:00 -0500 Ulrich Allen wrote: >I do not get new appointments converted from hplx to >outlook. >Although I see with app200 that new appointments are >in the file appt.adb which I transferred from the hplx, >they do not appear in tmpa.txt. >Appointments stop at the end of 2001 to appear. >Do I edit appointment in 2001 they appear changed in tmpa.txt. >So it must be the right file. Does the file pass DBCHECK? Also, make sure that the file you want to convert is in the folder that OL2LX is looking in. There could be a different version in another folder. -- Curtis Cameron ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml